Attachment 139023 Details for Bug 106195 – Kernel log on fresh boot

Kernel log on fresh boot

onboot_dmesg (text/plain), 135.84 KB, created by Zachary Tahenakos on 2018-04-23 18:43:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zachary Tahenakos

Created: 2018-04-23 18:43:49 UTC

Size: 135.84 KB

patch

obsolete

>[    0.000000] Linux version 4.10.0-28-generic (buildd@lgw01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 (Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17)
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=310f0a2d-b503-4ff9-bf15-62758e35c7c9 ro quiet splash drm.debug=0x06 vt.handoff=7
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c00c2fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c00c3000-0x00000000c00c3fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000c00c4000-0x00000000c00c4fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000c00c5000-0x00000000d0f9afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d0f9b000-0x00000000d149afff] type 20
>[    0.000000] BIOS-e820: [mem 0x00000000d149b000-0x00000000d1d7efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000d1d7f000-0x00000000d1f7efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000d1f7f000-0x00000000d1ffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000d1fff000-0x00000000d1ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d2000000-0x00000000d67fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001287fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.50 by HP
>[    0.000000] efi:  ACPI=0xd1ffe000  ACPI 2.0=0xd1ffe014  SMBIOS=0xd1766000  SMBIOS 3.0=0xd1764000  ESRT=0xcec65018  MPS=0xd1a58000  MEMATTR=0xce2a4518 
>[    0.000000] SMBIOS 3.1.0 present.
>[    0.000000] DMI: HP HP mt21 Mobile Thin Client/83D0, BIOS Q89 Ver. 01.02.03 01/22/2018
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x128800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   1 base 00D8000000 mask 7FF8000000 uncachable
>[    0.000000]   2 base 00D4000000 mask 7FFC000000 uncachable
>[    0.000000]   3 base 1C00000000 mask 7C00000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0xd2000 max_arch_pfn = 0x400000000
>[    0.000000] esrt: Reserving ESRT space from 0x00000000cec65018 to 0x00000000cec65050.
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff9d2b40097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0xbe228000, 0xbe228fff] PGTABLE
>[    0.000000] BRK [0xbe229000, 0xbe229fff] PGTABLE
>[    0.000000] BRK [0xbe22a000, 0xbe22afff] PGTABLE
>[    0.000000] BRK [0xbe22b000, 0xbe22bfff] PGTABLE
>[    0.000000] BRK [0xbe22c000, 0xbe22cfff] PGTABLE
>[    0.000000] BRK [0xbe22d000, 0xbe22dfff] PGTABLE
>[    0.000000] BRK [0xbe22e000, 0xbe22efff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x33028000-0x3580bfff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000D1FFE014 000024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 0x00000000D1FB3188 000104 (v01 HPQOEM SLIC-BPC 00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000D1FE6000 00010C (v05 HPQOEM SLIC-BPC 00000000 HP   00000001)
>[    0.000000] ACPI: DSDT 0x00000000D1FC3000 01F269 (v02 HPQOEM 83D0     00000000 INTL 20160527)
>[    0.000000] ACPI: FACS 0x00000000D1F5F000 000040
>[    0.000000] ACPI: SSDT 0x00000000D1FFC000 00012A (v02 HP     ShmTable 00000001 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FEE000 00C233 (v02 AcpiRe PLT_RTD3 00001000 INTL 20160527)
>[    0.000000] ACPI: UEFI 0x00000000D1F6E000 000042 (v01 HPQOEM EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000D1FED000 0003C8 (v02 HPQOEM Tpm2Tabl 00001000 INTL 20160527)
>[    0.000000] ACPI: TPM2 0x00000000D1FEC000 000034 (v03 HPQOEM EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000D1FE8000 003053 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
>[    0.000000] ACPI: WSMT 0x00000000D1FE7000 000028 (v01 HPQOEM 83D0     00000001 HP   00000001)
>[    0.000000] ACPI: HPET 0x00000000D1FE5000 000038 (v01 HPQOEM 83D0     00000001 HP   00000001)
>[    0.000000] ACPI: APIC 0x00000000D1FE4000 00012C (v03 HPQOEM 83D0     00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 0x00000000D1FE3000 00003C (v01 HPQOEM 83D0     00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 0x00000000D1FC2000 0001BC (v02 HPQOEM Sata0Ide 00001000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FC1000 000734 (v01 HPQOEM PtidDevc 00001000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FBD000 0038F9 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FBA000 002ABC (v02 GddvDu GddvDumm 00001000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FB8000 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FB7000 0009CF (v02 CtdpB  CtdpB    00001000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FB6000 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FB5000 00029F (v02 INTEL  sensrhub 00000000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FB4000 000346 (v01 INTEL  EInkApp  00000000 INTL 20160527)
>[    0.000000] ACPI: DBGP 0x00000000D1FFD000 000034 (v01 INTEL           00000002 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000D1FB2000 000054 (v00 INTEL           00000002 MSFT 0000005F)
>[    0.000000] ACPI: NHLT 0x00000000D1FB1000 00002D (v00 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000D1FB0000 000E6B (v01 HP     HPINNBWL 00001000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000D1FAF000 000032 (v01 HP     HPCONDEV 00001000 INTL 20160527)
>[    0.000000] ACPI: FPDT 0x00000000D1FAE000 000044 (v01 HPQOEM EDK2     00000002      01000013)
>[    0.000000] ACPI: BGRT 0x00000000D1FAD000 000038 (v01 HPQOEM EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000D1FFB000 0002F9 (v02 HP     PwrCtlEv 00000001 INTL 20160527)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001287fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x1287d3000-0x1287fdfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001287fffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
>[    0.000000]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c00c2fff]
>[    0.000000]   node   0: [mem 0x00000000c00c5000-0x00000000d0f9afff]
>[    0.000000]   node   0: [mem 0x00000000d1fff000-0x00000000d1ffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001287fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001287fffff]
>[    0.000000] On node 0 totalpages: 1021751
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 1113 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13311 pages used for memmap
>[    0.000000]   DMA32 zone: 851866 pages, LIFO batch:31
>[    0.000000]   Normal zone: 2592 pages used for memmap
>[    0.000000]   Normal zone: 165888 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x00000000d4800000-0x00000000d67fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc00c3000-0xc00c3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc00c4000-0xc00c4fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd0f9b000-0xd149afff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd149b000-0xd1d7efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd1d7f000-0xd1f7efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd1f7f000-0xd1ffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd2000000-0xd67fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd6800000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe00ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
>[    0.000000] e820: [mem 0xd6800000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] percpu: Embedded 36 pages/cpu @ffff9d2c68400000 s107992 r8192 d31272 u1048576
>[    0.000000] pcpu-alloc: s107992 r8192 d31272 u1048576 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1004671
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=310f0a2d-b503-4ff9-bf15-62758e35c7c9 ro quiet splash drm.debug=0x06 vt.handoff=7
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3837480K/4087004K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 249524K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
>[    0.000000] NR_IRQS:524544 nr_irqs:512 16
>[    0.000000] vt handoff: transparent VT on vt#7
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Detected 1800.000 MHz processor
>[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000)
>[    0.000035] pid_max: default: 32768 minimum: 301
>[    0.000048] ACPI: Core revision 20160930
>[    0.017105] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0xD16F (20160930/psloop-222)
>[    0.057431] ACPI: 17 ACPI AML tables successfully acquired and loaded
>[    0.057880] Security Framework initialized
>[    0.057881] Yama: becoming mindful.
>[    0.057898] AppArmor: AppArmor initialized
>[    0.058195] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.059202] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.059654] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.059659] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.059955] CPU: Physical Processor ID: 0
>[    0.059956] CPU: Processor Core ID: 0
>[    0.059991] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.059992] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.059998] mce: CPU supports 8 MCE banks
>[    0.060010] CPU0: Thermal monitoring enabled (TM1)
>[    0.060032] process: using mwait in idle threads
>[    0.060035] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
>[    0.060036] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.061517] Freeing SMP alternatives memory: 32K
>[    0.065461] ftrace: allocating 34206 entries in 134 pages
>[    0.087072] smpboot: Max logical packages: 1
>[    0.088311] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.092611] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.132303] TSC deadline timer enabled
>[    0.132308] smpboot: CPU0: Intel(R) Celeron(R) CPU 3865U @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0x9)
>[    0.132367] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.132406] ... version:                4
>[    0.132407] ... bit width:              48
>[    0.132407] ... generic registers:      8
>[    0.132408] ... value mask:             0000ffffffffffff
>[    0.132409] ... max period:             00007fffffffffff
>[    0.132409] ... fixed-purpose events:   3
>[    0.132410] ... event mask:             00000007000000ff
>[    0.133452] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.133466] smp: Bringing up secondary CPUs ...
>[    0.133545] x86: Booting SMP configuration:
>[    0.133546] .... node  #0, CPUs:      #1
>[    0.134069] smp: Brought up 1 node, 2 CPUs
>[    0.134071] smpboot: Total of 2 processors activated (7200.00 BogoMIPS)
>[    0.136006] devtmpfs: initialized
>[    0.136083] x86/mm: Memory block size: 128MB
>[    0.138795] evm: security.selinux
>[    0.138796] evm: security.SMACK64
>[    0.138797] evm: security.SMACK64EXEC
>[    0.138797] evm: security.SMACK64TRANSMUTE
>[    0.138797] evm: security.SMACK64MMAP
>[    0.138798] evm: security.ima
>[    0.138799] evm: security.capability
>[    0.138868] PM: Registering ACPI NVS region [mem 0xc00c3000-0xc00c3fff] (4096 bytes)
>[    0.138869] PM: Registering ACPI NVS region [mem 0xd1d7f000-0xd1f7efff] (2097152 bytes)
>[    0.138951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.138959] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.138997] pinctrl core: initialized pinctrl subsystem
>[    0.139180] RTC time: 18:20:12, date: 04/23/18
>[    0.139279] NET: Registered protocol family 16
>[    0.150085] cpuidle: using governor ladder
>[    0.162096] cpuidle: using governor menu
>[    0.162102] PCCT header not found.
>[    0.162171] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.162172] ACPI: bus type PCI registered
>[    0.162174] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.162248] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.162284] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.162290] PCI: Using configuration type 1 for base access
>[    0.176545] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.176546] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.176776] ACPI: Added _OSI(Module Device)
>[    0.176777] ACPI: Added _OSI(Processor Device)
>[    0.176777] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.176778] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.180646] ACPI: Executed 54 blocks of module-level executable AML code
>[    0.190298] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.197749] ACPI: Dynamic OEM Table Load:
>[    0.197800] ACPI: SSDT 0xFFFF9D2C62D39800 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
>[    0.198005] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.198125] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
>[    0.199501] ACPI: Dynamic OEM Table Load:
>[    0.199513] ACPI: SSDT 0xFFFF9D2C62EBA800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
>[    0.199683] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.199930] ACPI: Dynamic OEM Table Load:
>[    0.199939] ACPI: SSDT 0xFFFF9D2C62E21D80 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
>[    0.200084] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.200218] ACPI: Dynamic OEM Table Load:
>[    0.200228] ACPI: SSDT 0xFFFF9D2C62D3E000 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
>[    0.200364] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.200924] ACPI: Dynamic OEM Table Load:
>[    0.200938] ACPI: SSDT 0xFFFF9D2C62D8D000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160527)
>[    0.201793] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.202027] ACPI: Dynamic OEM Table Load:
>[    0.202037] ACPI: SSDT 0xFFFF9D2C62EBB800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
>[    0.202249] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.202498] ACPI: Dynamic OEM Table Load:
>[    0.202507] ACPI: SSDT 0xFFFF9D2C62EBA400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
>[    0.202716] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.203713] ACPI : EC: EC started
>[    0.203714] ACPI : EC: interrupt blocked
>[    0.222528] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
>[    0.222530] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.222532] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
>[    0.222532] ACPI: Interpreter enabled
>[    0.222613] ACPI: (supports S0 S3 S4 S5)
>[    0.222614] ACPI: Using IOAPIC for interrupt routing
>[    0.222675] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.229094] ACPI: Power Resource [PRUB] (on)
>[    0.233974] ACPI: Power Resource [WRST] (on)
>[    0.236170] ACPI: Power Resource [PXP] (off)
>[    0.237649] ACPI: Power Resource [PXP] (on)
>[    0.382402] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.382409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.384707] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.384708] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.387537] PCI host bridge to bus 0000:00
>[    0.387540] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.387542] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.387543] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.387544] pci_bus 0000:00: root bus resource [mem 0xd6800000-0xf7ffffff window]
>[    0.387545] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1fffffffff window]
>[    0.387547] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
>[    0.387548] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.387558] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
>[    0.388648] pci 0000:00:02.0: [8086:5906] type 00 class 0x030000
>[    0.388661] pci 0000:00:02.0: reg 0x10: [mem 0x1ffe000000-0x1ffeffffff 64bit]
>[    0.388669] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.388675] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
>[    0.389787] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
>[    0.389801] pci 0000:00:04.0: reg 0x10: [mem 0x1fff010000-0x1fff017fff 64bit]
>[    0.390991] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
>[    0.391008] pci 0000:00:14.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
>[    0.391074] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.392232] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.392277] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
>[    0.392298] pci 0000:00:14.2: reg 0x10: [mem 0x1fff020000-0x1fff020fff 64bit]
>[    0.393525] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
>[    0.393733] pci 0000:00:15.0: reg 0x10: [mem 0x1fff01f000-0x1fff01ffff 64bit]
>[    0.395666] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
>[    0.395874] pci 0000:00:15.1: reg 0x10: [mem 0x1fff01e000-0x1fff01efff 64bit]
>[    0.397741] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
>[    0.397764] pci 0000:00:16.0: reg 0x10: [mem 0x1fff01d000-0x1fff01dfff 64bit]
>[    0.397848] pci 0000:00:16.0: PME# supported from D3hot
>[    0.399019] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
>[    0.399036] pci 0000:00:17.0: reg 0x10: [mem 0xf0314000-0xf0315fff]
>[    0.399045] pci 0000:00:17.0: reg 0x14: [mem 0xf0317000-0xf03170ff]
>[    0.399054] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
>[    0.399062] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
>[    0.399070] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
>[    0.399077] pci 0000:00:17.0: reg 0x24: [mem 0xf0316000-0xf03167ff]
>[    0.399128] pci 0000:00:17.0: PME# supported from D3hot
>[    0.400241] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
>[    0.400309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.401399] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.401454] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
>[    0.401526] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.402621] pci 0000:00:1c.5: System wakeup disabled by ACPI
>[    0.402669] pci 0000:00:1d.0: [8086:9d1b] type 01 class 0x060400
>[    0.402746] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.403851] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.403916] pci 0000:00:1f.0: [8086:9d50] type 00 class 0x060100
>[    0.405084] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
>[    0.405095] pci 0000:00:1f.2: reg 0x10: [mem 0xf0310000-0xf0313fff]
>[    0.406231] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
>[    0.406255] pci 0000:00:1f.3: reg 0x10: [mem 0x1fff018000-0x1fff01bfff 64bit]
>[    0.406283] pci 0000:00:1f.3: reg 0x20: [mem 0x1fff000000-0x1fff00ffff 64bit]
>[    0.406337] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>[    0.407560] pci 0000:00:1f.3: System wakeup disabled by ACPI
>[    0.407606] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
>[    0.407646] pci 0000:00:1f.4: reg 0x10: [mem 0x1fff01c000-0x1fff01c0ff 64bit]
>[    0.407697] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
>[    0.408911] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
>[    0.408932] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
>[    0.408962] pci 0000:01:00.0: reg 0x18: [mem 0xf0204000-0xf0204fff 64bit]
>[    0.408980] pci 0000:01:00.0: reg 0x20: [mem 0xf0200000-0xf0203fff 64bit]
>[    0.409081] pci 0000:01:00.0: supports D1 D2
>[    0.409082] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.409140] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    0.422449] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.422453] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.422456] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf02fffff]
>[    0.422880] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
>[    0.422960] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf0101fff 64bit]
>[    0.423433] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.423656] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.434967] pci 0000:00:1c.5: PCI bridge to [bus 02]
>[    0.434972] pci 0000:00:1c.5:   bridge window [mem 0xf0100000-0xf01fffff]
>[    0.435110] pci 0000:03:00.0: [10ec:522a] type 00 class 0xff0000
>[    0.435127] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0000fff]
>[    0.435315] pci 0000:03:00.0: supports D1 D2
>[    0.435316] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.435367] pci 0000:03:00.0: System wakeup disabled by ACPI
>[    0.446605] pci 0000:00:1d.0: PCI bridge to [bus 03]
>[    0.446609] pci 0000:00:1d.0:   bridge window [mem 0xf0000000-0xf00fffff]
>[    0.450211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.450274] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.450334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.450394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.450462] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.450520] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.450578] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.450634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.451106] ACPI: Enabled 6 GPEs in block 00 to 7F
>[    0.451177] ACPI : EC: interrupt unblocked
>[    0.451183] ACPI : EC: event unblocked
>[    0.451192] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.451194] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
>[    0.451499] SCSI subsystem initialized
>[    0.451539] libata version 3.00 loaded.
>[    0.451579] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.451580] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.451585] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.451586] vgaarb: loaded
>[    0.451607] ACPI: bus type USB registered
>[    0.451623] usbcore: registered new interface driver usbfs
>[    0.451631] usbcore: registered new interface driver hub
>[    0.451644] usbcore: registered new device driver usb
>[    0.451730] Registered efivars operations
>[    0.483822] PCI: Using ACPI for IRQ routing
>[    0.490498] PCI: pci_cache_line_size set to 64 bytes
>[    0.491234] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.491236] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.491237] e820: reserve RAM buffer [mem 0xc00c3000-0xc3ffffff]
>[    0.491238] e820: reserve RAM buffer [mem 0xd0f9b000-0xd3ffffff]
>[    0.491239] e820: reserve RAM buffer [mem 0xd2000000-0xd3ffffff]
>[    0.491240] e820: reserve RAM buffer [mem 0x128800000-0x12bffffff]
>[    0.491354] NetLabel: Initializing
>[    0.491355] NetLabel:  domain hash size = 128
>[    0.491356] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.491373] NetLabel:  unlabeled traffic allowed by default
>[    0.491510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.491516] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
>[    0.493563] clocksource: Switched to clocksource hpet
>[    0.502318] VFS: Disk quotas dquot_6.6.0
>[    0.502340] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.502447] AppArmor: AppArmor Filesystem Enabled
>[    0.502500] pnp: PnP ACPI init
>[    0.502777] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
>[    0.502779] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    0.502780] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    0.502782] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
>[    0.502784] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    0.502788] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.503244] system 00:01: [io  0x2000-0x20fe] has been reserved
>[    0.503246] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.503526] system 00:02: [io  0x0680-0x069f] has been reserved
>[    0.503528] system 00:02: [io  0xffff] has been reserved
>[    0.503529] system 00:02: [io  0xffff] has been reserved
>[    0.503530] system 00:02: [io  0xffff] has been reserved
>[    0.503533] system 00:02: [io  0x1800-0x18fe] has been reserved
>[    0.503535] system 00:02: [io  0x164e-0x164f] has been reserved
>[    0.503537] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.503691] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.503739] system 00:04: [io  0x1854-0x1857] has been reserved
>[    0.503741] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.503767] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
>[    0.503790] pnp 00:06: Plug and Play ACPI device, IDs SYN3064 SYN0100 SYN0002 PNP0f13 (active)
>[    0.503862] system 00:07: [io  0x0200-0x023f] has been reserved
>[    0.503864] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved
>[    0.503866] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.505466] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved
>[    0.505468] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved
>[    0.505470] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.506296] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved
>[    0.506298] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.506675] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.506676] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.506678] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.506679] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.506680] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.506682] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.506683] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.506685] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
>[    0.506686] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.506687] system 00:0a: [mem 0xd6800000-0xd681ffff] has been reserved
>[    0.506690] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.507149] pnp: PnP ACPI: found 11 devices
>[    0.514369] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.514395] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    0.514398] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
>[    0.514403] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    0.514404] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    0.514406] pci 0000:00:1d.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
>[    0.514408] pci 0000:00:1d.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
>[    0.514414] pci 0000:00:1d.0: BAR 15: assigned [mem 0x1c00000000-0x1c001fffff 64bit pref]
>[    0.514416] pci 0000:00:1d.0: BAR 13: assigned [io  0x5000-0x5fff]
>[    0.514419] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.514422] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.514426] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf02fffff]
>[    0.514433] pci 0000:00:1c.5: PCI bridge to [bus 02]
>[    0.514436] pci 0000:00:1c.5:   bridge window [mem 0xf0100000-0xf01fffff]
>[    0.514445] pci 0000:00:1d.0: PCI bridge to [bus 03]
>[    0.514447] pci 0000:00:1d.0:   bridge window [io  0x5000-0x5fff]
>[    0.514450] pci 0000:00:1d.0:   bridge window [mem 0xf0000000-0xf00fffff]
>[    0.514454] pci 0000:00:1d.0:   bridge window [mem 0x1c00000000-0x1c001fffff 64bit pref]
>[    0.514460] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.514461] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.514463] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.514464] pci_bus 0000:00: resource 7 [mem 0xd6800000-0xf7ffffff window]
>[    0.514465] pci_bus 0000:00: resource 8 [mem 0x1c00000000-0x1fffffffff window]
>[    0.514466] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
>[    0.514468] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
>[    0.514469] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
>[    0.514471] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
>[    0.514472] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
>[    0.514473] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
>[    0.514474] pci_bus 0000:03: resource 2 [mem 0x1c00000000-0x1c001fffff 64bit pref]
>[    0.514647] NET: Registered protocol family 2
>[    0.514872] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.514942] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.515035] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.515058] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.515076] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.515121] NET: Registered protocol family 1
>[    0.515137] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.515147] pci 0000:00:14.0: enabling device (0000 -> 0002)
>[    0.515871] PCI: CLS 0 bytes, default 64
>[    0.515921] Unpacking initramfs...
>[    1.357675] Freeing initrd memory: 40848K
>[    1.357679] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.357682] software IO TLB [mem 0xc93ca000-0xcd3ca000] (64MB) mapped at [ffff9d2c093ca000-ffff9d2c0d3c9fff]
>[    1.357758] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
>[    1.357846] Scanning for low memory corruption every 60 seconds
>[    1.358202] audit: initializing netlink subsys (disabled)
>[    1.358252] audit: type=2000 audit(1524507613.352:1): initialized
>[    1.358714] Initialise system trusted keyrings
>[    1.358798] workingset: timestamp_bits=36 max_order=20 bucket_order=0
>[    1.360502] zbud: loaded
>[    1.361023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    1.361249] fuse init (API version 7.26)
>[    1.363078] Key type asymmetric registered
>[    1.363079] Asymmetric key parser 'x509' registered
>[    1.363116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    1.363151] io scheduler noop registered
>[    1.363152] io scheduler deadline registered
>[    1.363160] io scheduler cfq registered (default)
>[    1.364074] pcieport 0000:00:1c.0: AER enabled with IRQ 120
>[    1.364097] pcieport 0000:00:1c.5: AER enabled with IRQ 121
>[    1.364120] pcieport 0000:00:1d.0: AER enabled with IRQ 122
>[    1.364133] pcieport 0000:00:1c.0: Signaling PME with IRQ 120
>[    1.364143] pcieport 0000:00:1c.5: Signaling PME with IRQ 121
>[    1.364153] pcieport 0000:00:1d.0: Signaling PME with IRQ 122
>[    1.364171] pciehp 0000:00:1d.0:pcie004: Slot #11 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    1.364236] efifb: probing for efifb
>[    1.364273] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
>[    1.364274] efifb: mode is 1024x768x32, linelength=4096, pages=1
>[    1.364275] efifb: scrolling: redraw
>[    1.364276] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.364374] Console: switching to colour frame buffer device 128x48
>[    1.364389] fb0: EFI VGA frame buffer device
>[    1.364396] intel_idle: MWAIT substates: 0x11142120
>[    1.364397] intel_idle: v0.4.1 model 0x8E
>[    1.364527] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.364707] ACPI: AC Adapter [AC] (on-line)
>[    1.364785] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>[    1.364789] ACPI: Sleep Button [SLPB]
>[    1.364870] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.364879] ACPI: Lid Switch [LID]
>[    1.364937] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    1.364939] ACPI: Power Button [PWRF]
>[    1.372609] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    1.374321] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.374322] ACPI: Thermal Zone [CPUZ] (0 C)
>[    1.381383] thermal LNXTHERM:01: registered as thermal_zone1
>[    1.381384] ACPI: Thermal Zone [GFXZ] (0 C)
>[    1.386379] thermal LNXTHERM:02: registered as thermal_zone2
>[    1.386381] ACPI: Thermal Zone [EXTZ] (49 C)
>[    1.390697] thermal LNXTHERM:03: registered as thermal_zone3
>[    1.390698] ACPI: Thermal Zone [LOCZ] (44 C)
>[    1.397476] thermal LNXTHERM:04: registered as thermal_zone4
>[    1.397478] ACPI: Thermal Zone [BATZ] (34 C)
>[    1.397504] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20160930/exoparg2-427)
>[    1.397516] ACPI Error: Method parse/execution failed [\_TZ.GETP] (Node ffff9d2c638f2f00), AE_AML_PACKAGE_LIMIT (20160930/psparse-543)
>[    1.397523] ACPI Error: Method parse/execution failed [\_TZ.CHGZ._CRT] (Node ffff9d2c638f25f0), AE_AML_PACKAGE_LIMIT (20160930/psparse-543)
>[    1.399490] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20160930/exoparg2-427)
>[    1.399501] ACPI Error: Method parse/execution failed [\_TZ.GETP] (Node ffff9d2c638f2f00), AE_AML_PACKAGE_LIMIT (20160930/psparse-543)
>[    1.399508] ACPI Error: Method parse/execution failed [\_TZ.CHGZ._CRT] (Node ffff9d2c638f25f0), AE_AML_PACKAGE_LIMIT (20160930/psparse-543)
>[    1.399517] [Firmware Bug]: No valid trip found
>[    1.404510] thermal LNXTHERM:06: registered as thermal_zone5
>[    1.404512] ACPI: Thermal Zone [PCHZ] (0 C)
>[    1.404565] GHES: HEST is not enabled!
>[    1.404919] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    1.407697] Linux agpgart interface v0.103
>[    1.417017] ACPI: Battery Slot [BAT0] (battery present)
>[    1.461740] tpm_tis IFX0762:00: 2.0 TPM (device-id 0x1B, rev-id 16)
>[    1.912286] loop: module loaded
>[    1.912483] libphy: Fixed MDIO Bus: probed
>[    1.912484] tun: Universal TUN/TAP device driver, 1.6
>[    1.912484] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    1.912515] PPP generic driver version 2.4.2
>[    1.912555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.912557] ehci-pci: EHCI PCI platform driver
>[    1.912569] ehci-platform: EHCI generic platform driver
>[    1.912581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.912586] ohci-pci: OHCI PCI platform driver
>[    1.912596] ohci-platform: OHCI generic platform driver
>[    1.912602] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.912847] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.912853] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.913947] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
>[    1.913952] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.914051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.914052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.914053] usb usb1: Product: xHCI Host Controller
>[    1.914055] usb usb1: Manufacturer: Linux 4.10.0-28-generic xhci-hcd
>[    1.914056] usb usb1: SerialNumber: 0000:00:14.0
>[    1.914170] hub 1-0:1.0: USB hub found
>[    1.914186] hub 1-0:1.0: 12 ports detected
>[    1.924508] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.924512] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.924541] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.924543] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.924544] usb usb2: Product: xHCI Host Controller
>[    1.924545] usb usb2: Manufacturer: Linux 4.10.0-28-generic xhci-hcd
>[    1.924546] usb usb2: SerialNumber: 0000:00:14.0
>[    1.924649] hub 2-0:1.0: USB hub found
>[    1.924657] hub 2-0:1.0: 4 ports detected
>[    1.928445] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.929997] i8042: Detected active multiplexing controller, rev 1.1
>[    1.930270] random: fast init done
>[    1.930347] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.930351] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.930385] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.930411] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.930438] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.930544] mousedev: PS/2 mouse device common for all mice
>[    1.930681] rtc_cmos 00:03: RTC can wake from S4
>[    1.931060] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    1.931152] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.931158] i2c /dev entries driver
>[    1.931218] device-mapper: uevent: version 1.0.3
>[    1.931281] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
>[    1.931284] intel_pstate: Intel P-state driver initializing
>[    1.931501] intel_pstate: HWP enabled
>[    1.931586] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.931588] EFI Variables Facility v0.08 2004-May-17
>[    1.955404] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.968441] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
>[    1.968674] NET: Registered protocol family 10
>[    1.972448] Segment Routing with IPv6
>[    1.972470] NET: Registered protocol family 17
>[    1.972481] Key type dns_resolver registered
>[    1.972706] microcode: sig=0x806e9, pf=0x80, revision=0x70
>[    1.972742] microcode: Microcode Update Driver: v2.2.
>[    1.972838] registered taskstats version 1
>[    1.972849] Loading compiled-in X.509 certificates
>[    1.975418] Loaded X.509 cert 'Build time autogenerated kernel key: 1dbff672f4e4d459849c8aa71c01089bd04bfcdd'
>[    1.975441] zswap: loaded using pool lzo/zbud
>[    1.977176] Key type big_key registered
>[    1.977179] Key type trusted registered
>[    1.978799] Key type encrypted registered
>[    1.978802] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.249765] usb 1-6: new high-speed USB device number 2 using xhci_hcd
>[    2.369965] clocksource: Switched to clocksource tsc
>[    2.435578] usb 1-6: New USB device found, idVendor=04ca, idProduct=706e
>[    2.435580] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    2.435581] usb 1-6: Product: HP HD Camera
>[    2.435582] usb 1-6: Manufacturer: DGHJC019IA8LLD
>[    2.435583] usb 1-6: SerialNumber: 200901010001
>[    2.557722] usb 1-7: new full-speed USB device number 3 using xhci_hcd
>[    2.601811] evm: HMAC attrs: 0x1
>[    2.603534]   Magic number: 14:895:342
>[    2.603555] thermal thermal_zone5: hash matches
>[    2.603754] rtc_cmos 00:03: setting system clock to 2018-04-23 18:20:14 UTC (1524507614)
>[    2.603940] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    2.603941] EDD information not available.
>[    2.603996] PM: Hibernation image not present or could not be loaded.
>[    2.605967] Freeing unused kernel memory: 2228K
>[    2.605968] Write protecting the kernel read-only data: 14336k
>[    2.606413] Freeing unused kernel memory: 1164K
>[    2.607101] Freeing unused kernel memory: 272K
>[    2.615582] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.685137] [drm] Initialized
>[    2.685240] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
>[    2.698470] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
>[    2.698472] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.711407] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.714888] wmi: Mapper loaded
>[    2.720371] ahci 0000:00:17.0: version 3.0
>[    2.724285] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
>[    2.724658] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 277
>[    2.732432] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    2.732435] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    2.737242] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    2.737251] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    2.741322] scsi host0: ahci
>[    2.741456] scsi host1: ahci
>[    2.741506] ata1: SATA max UDMA/133 abar m2048@0xf0316000 port 0xf0316100 irq 276
>[    2.741508] ata2: SATA max UDMA/133 abar m2048@0xf0316000 port 0xf0316180 irq 276
>[    2.741886] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>[    2.741919] [drm:i915_driver_load [i915]] Found SunrisePoint LP PCH
>[    2.741951] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
>[    2.742064] [drm:intel_device_info_dump [i915]] i915 device info: gen=9, pciid=0x5906 rev=0x02
>[    2.742089] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    2.742113] [drm:intel_device_info_dump [i915]] i915 device info: is_i85x: no
>[    2.742147] [drm:intel_device_info_dump [i915]] i915 device info: is_i915g: no
>[    2.742169] [drm:intel_device_info_dump [i915]] i915 device info: is_i945gm: no
>[    2.742191] [drm:intel_device_info_dump [i915]] i915 device info: is_g33: no
>[    2.742212] [drm:intel_device_info_dump [i915]] i915 device info: is_g4x: no
>[    2.742234] [drm:intel_device_info_dump [i915]] i915 device info: is_pineview: no
>[    2.742254] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwater: no
>[    2.742275] [drm:intel_device_info_dump [i915]] i915 device info: is_crestline: no
>[    2.742295] [drm:intel_device_info_dump [i915]] i915 device info: is_ivybridge: no
>[    2.742317] [drm:intel_device_info_dump [i915]] i915 device info: is_valleyview: no
>[    2.742336] [drm:intel_device_info_dump [i915]] i915 device info: is_cherryview: no
>[    2.742357] [drm:intel_device_info_dump [i915]] i915 device info: is_haswell: no
>[    2.742378] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwell: no
>[    2.742398] [drm:intel_device_info_dump [i915]] i915 device info: is_skylake: no
>[    2.742417] [drm:intel_device_info_dump [i915]] i915 device info: is_broxton: no
>[    2.742437] [drm:intel_device_info_dump [i915]] i915 device info: is_kabylake: yes
>[    2.742455] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    2.742474] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes
>[    2.742493] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes
>[    2.742512] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes
>[    2.742531] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes
>[    2.742550] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[    2.742570] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes
>[    2.742589] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes
>[    2.742608] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[    2.742631] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes
>[    2.742649] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    2.742666] [drm:intel_device_info_dump [i915]] i915 device info: has_hw_contexts: yes
>[    2.742684] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[    2.742703] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes
>[    2.742721] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes
>[    2.742738] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    2.742756] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[    2.742773] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    2.742791] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes
>[    2.742809] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    2.742846] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    2.742864] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes
>[    2.742882] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    2.742899] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[    2.742917] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    2.742935] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    2.742952] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    2.742970] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    2.742987] [drm:intel_device_info_dump [i915]] i915 device info: has_decoupled_mmio: no
>[    2.743281] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001
>[    2.743299] [drm:intel_device_info_runtime_init [i915]] slice total: 1
>[    2.743317] [drm:intel_device_info_runtime_init [i915]] subslice total: 2
>[    2.743335] [drm:intel_device_info_runtime_init [i915]] subslice mask 0006
>[    2.743353] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 2
>[    2.743370] [drm:intel_device_info_runtime_init [i915]] EU total: 12
>[    2.743388] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 6
>[    2.743406] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    2.743423] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[    2.743441] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y
>[    2.743466] [drm:i915_driver_load [i915]] ppgtt mode: 3
>[    2.743489] [drm:i915_driver_load [i915]] use GPU sempahores? no
>[    2.743502] [drm] Memory usable by graphics device = 4096M
>[    2.743534] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    2.743562] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 32M
>[    2.743564] checking generic (e0000000 300000) vs hw (e0000000 10000000)
>[    2.743564] fb: switching to inteldrmfb from EFI VGA
>[    2.743587] Console: switching to colour dummy device 80x25
>[    2.743667] [drm] Replacing VGA console driver
>[    2.743716] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K
>[    2.743759] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xd1f64018
>[    2.743805] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    2.743832] [drm:intel_opregion_setup [i915]] SWSCI supported
>[    2.750722] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffb264c0701000, 80:ce:62:3c:06:a2, XID 14100800 IRQ 278
>[    2.750724] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    2.750929] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    2.750964] [drm:intel_opregion_setup [i915]] ASLE supported
>[    2.750994] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[    2.751021] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    2.751226] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.751227] [drm] Driver supports precise vblank timestamp query.
>[    2.751275] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[    2.751311] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE        ", BDB version 209
>[    2.751339] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.751364] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    2.753458] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[    2.753496] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    2.753529] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    2.753686] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    2.753704] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    2.753734] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[    2.753762] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 1000 Hz, active high, min brightness 0, level 255
>[    2.753788] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping.
>[    2.753812] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 209 not known; assuming 38
>[    2.753836] [drm:intel_bios_init [i915]] DRRS State Enabled:0
>[    2.753860] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    2.753881] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[    2.753903] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.753924] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
>[    2.753944] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.753963] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
>[    2.754045] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    2.754081] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz
>[    2.754112] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    2.754283] [drm:intel_power_well_enable [i915]] enabling power well 1
>[    2.754313] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
>[    2.754344] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    2.754369] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
>[    2.754392] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz
>[    2.754432] [drm:intel_power_well_enable [i915]] enabling always-on
>[    2.754457] [drm:intel_power_well_enable [i915]] enabling DC off
>[    2.754483] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    2.754509] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.754533] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well
>[    2.754556] [drm:intel_power_well_enable [i915]] enabling DDI B power well
>[    2.754577] [drm:skl_set_power_well [i915]] Enabling DDI B power well
>[    2.754598] [drm:intel_power_well_enable [i915]] enabling DDI C power well
>[    2.754619] [drm:skl_set_power_well [i915]] Enabling DDI C power well
>[    2.754639] [drm:intel_power_well_enable [i915]] enabling DDI D power well
>[    2.754660] [drm:skl_set_power_well [i915]] Enabling DDI D power well
>[    2.754799] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    2.754837] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_01.bin
>[    2.754867] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
>[    2.754869] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
>[    2.755513] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    2.755548] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
>[    2.755573] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    2.755595] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    2.755617] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    2.755639] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    2.755660] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    2.755680] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    2.755699] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    2.755737] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    2.755927] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    2.755936] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.756392] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[    2.756438] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
>[    2.756511] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    2.756539] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 500 t9 2000 t10 500 t11_t12 5000
>[    2.756564] [drm:intel_dp_init_panel_power_sequencer.part.18 [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>[    2.756589] [drm:intel_dp_init_panel_power_sequencer.part.18 [i915]] backlight on delay 50, off delay 200
>[    2.756659] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    2.756697] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    2.756766] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    2.757555] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 0a c2 41 00 00 01 c0 02 00 00 00 1f 0b 00
>[    2.758030] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    2.758943] [drm:intel_dp_init_connector [i915]] EDP DPCD : 02 b7 f6
>[    2.761530] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.763114] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.764496] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.765941] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.768278] r8169 0000:01:00.0 enp1s0: renamed from eth0
>[    2.769461] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.770771] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.772101] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.773427] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer
>[    2.774530] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    2.774578] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    2.774644] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 1500/1500
>[    2.774690] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    2.774736] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
>[    2.774768] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    2.774798] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT)
>[    2.774826] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    2.774853] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>[    2.774901] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:31:pipe A] hw state readout: enabled
>[    2.774933] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:38:pipe B] hw state readout: disabled
>[    2.774962] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:45:pipe C] hw state readout: disabled
>[    2.774991] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
>[    2.775017] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    2.775041] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    2.775064] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    2.775101] [drm:intel_ddi_get_config [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    2.775127] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:46:DDI A] hw state readout: enabled, pipe A
>[    2.775150] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DDI B] hw state readout: disabled, pipe A
>[    2.775172] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI C] hw state readout: disabled, pipe A
>[    2.775193] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A
>[    2.775214] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B
>[    2.775234] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C
>[    2.775255] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:47:eDP-1] hw state readout: enabled
>[    2.775276] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:56:HDMI-A-1] hw state readout: disabled
>[    2.775296] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: disabled
>[    2.775315] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:HDMI-A-2] hw state readout: disabled
>[    2.775355] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][setup_hw_state]
>[    2.775382] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    2.775407] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6463888, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
>[    2.775431] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.775453] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.775466] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138699 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    2.775489] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.775500] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138699 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    2.775523] [drm:intel_dump_pipe_config [i915]] crtc timings: 138699 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x40 flags: 0x9
>[    2.775544] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768
>[    2.775565] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    2.775584] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    2.775603] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.775623] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.775641] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.775660] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] disabled, scaler_id = -1
>[    2.775679] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    2.775698] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] disabled, scaler_id = -1
>[    2.775717] [drm:intel_dump_pipe_config [i915]] [CRTC:38:pipe B][setup_hw_state]
>[    2.775736] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    2.775754] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.775771] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.775783] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.775802] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.775812] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.775833] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.775852] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[    2.775870] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    2.775889] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.775907] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.775925] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.775943] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.775961] [drm:intel_dump_pipe_config [i915]] [PLANE:32:plane 1B] disabled, scaler_id = -1
>[    2.775979] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 2B] disabled, scaler_id = -1
>[    2.775997] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor B] disabled, scaler_id = -1
>[    2.776016] [drm:intel_dump_pipe_config [i915]] [CRTC:45:pipe C][setup_hw_state]
>[    2.776034] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    2.776052] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.776069] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.776080] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.776099] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.776109] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.776129] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.776147] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[    2.776165] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    2.776184] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.776201] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.776219] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.776237] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.776255] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 1C] disabled, scaler_id = -1
>[    2.776273] [drm:intel_dump_pipe_config [i915]] [PLANE:41:plane 2C] disabled, scaler_id = -1
>[    2.776291] [drm:intel_dump_pipe_config [i915]] [PLANE:43:cursor C] disabled, scaler_id = -1
>[    2.776349] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000
>[    2.776380] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=300000
>[    2.776410] [drm:intel_alloc_initial_plane_obj.isra.129 [i915]] initial plane fb obj ffff9d2c5a19f180
>[    2.776687] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [301000, fffff000]
>[    2.776729] [drm:i915_gem_context_init [i915]] LR context support initialized
>[    2.776765] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0xffffe000
>[    2.777319] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring
>[    2.777410] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring
>[    2.777484] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring
>[    2.777553] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring
>[    2.777631] [drm:intel_guc_setup [i915]] GuC fw status: path i915/kbl_guc_ver9_14.bin, fetch NONE, load NONE
>[    2.777638] [drm] GuC firmware load skipped
>[    2.779739] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    2.779772] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    2.779800] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    2.779826] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    2.779850] [drm:intel_fbdev_init [i915]] fb not wide enough for plane A (7680 vs 4096)
>[    2.779873] [drm:intel_fbdev_init [i915]] BIOS fb not suitable for all pipes, not using
>[    2.779964] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    2.779993] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    2.780021] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    2.780045] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.780069] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.780491] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    2.780800] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:47:eDP-1] status updated from unknown to connected
>[    2.780829] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    2.783020] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.783055] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.785250] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.785266] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.787467] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.787501] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.789710] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.789721] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.789727] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] status updated from unknown to disconnected
>[    2.789764] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    2.789779] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:59:DP-1] status updated from unknown to disconnected
>[    2.789811] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    2.792018] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.792053] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.793756] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.793776] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.796006] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.796040] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.797733] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.797744] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.797750] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] status updated from unknown to disconnected
>[    2.798204] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    2.798246] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    2.798433] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-1
>[    2.798701] [drm:intel_opregion_register [i915]] 4 outputs detected
>[    2.801273] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.801725] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
>[    2.801812] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
>[    2.801889] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    2.801896] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[    2.801939] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    2.801977] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    2.802011] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    2.802040] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.802066] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.802515] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    2.802942] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    2.802952] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[    2.802965] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    2.802974] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    2.802980] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[    2.803017] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    2.805219] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.805255] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.807452] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.807466] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.809678] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.809713] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.811916] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.811927] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.811934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[    2.811940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    2.811976] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    2.811990] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    2.811994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[    2.812025] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    2.813742] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.813775] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.815982] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.816000] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.818189] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.818224] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.820430] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.820441] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.820448] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[    2.820455] [drm:drm_setup_crtcs [drm_kms_helper]] connector 47 enabled? yes
>[    2.820460] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no
>[    2.820464] [drm:drm_setup_crtcs [drm_kms_helper]] connector 59 enabled? no
>[    2.820468] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no
>[    2.820506] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.820511] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 47
>[    2.820516] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 47 0
>[    2.820520] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    2.820524] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    2.820531] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 31 (0,0)
>[    2.820564] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    2.821519] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00340000
>[    2.821656] fbcon: inteldrmfb (fb0) is primary device
>[    2.821754] Console: switching to colour frame buffer device 240x67
>[    2.821782] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.053942] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    3.053961] ata1: SATA link down (SStatus 4 SControl 300)
>[    3.055637] ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
>[    3.056651] ata2.00: ATA-10: SAMSUNG MZNLN128HAHQ-000H1, MVT23H3Q, max UDMA/100
>[    3.056653] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    3.057633] ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
>[    3.058953] ata2.00: configured for UDMA/100
>[    3.059255] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNLN128 3H3Q PQ: 0 ANSI: 5
>[    3.089931] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
>[    3.089932] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    3.089934] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    3.089943] sd 1:0:0:0: [sda] Write Protect is off
>[    3.089945] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.089957] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.091551]  sda: sda1 sda2 sda3
>[    3.092064] sd 1:0:0:0: [sda] Attached SCSI disk
>[    3.146317] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.293760] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    3.293881] systemd[1]: Detected architecture x86-64.
>[    3.294022] systemd[1]: Set hostname to <hpd>.
>[    3.352906] systemd[1]: Created slice User and Session Slice.
>[    3.352948] systemd[1]: Reached target Remote File Systems (Pre).
>[    3.352956] systemd[1]: Reached target Encrypted Volumes.
>[    3.353202] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    3.353239] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    3.353264] systemd[1]: Listening on udev Kernel Socket.
>[    3.353329] systemd[1]: Listening on Journal Audit Socket.
>[    3.382833] lp: driver loaded but no devices found
>[    3.386335] ppdev: user-space parallel port driver
>[    3.458673] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.475528] systemd-journald[223]: Received request to flush runtime journal from PID 1
>[    3.492202] psmouse serio3: synaptics: queried max coordinates: x [..5656], y [..4710]
>[    3.521405] psmouse serio3: synaptics: queried min coordinates: x [1284..], y [1144..]
>[    3.574119] psmouse serio3: synaptics: Touchpad model: 1, fw: 10.0, id: 0x1e2a1, caps: 0xf00123/0x840300/0x12e800/0x500000, board id: 3338, fw id: 2627508
>[    3.593208] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:47:eDP-1] checking for sink bpp constrains
>[    3.593233] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[    3.593260] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    3.593284] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz
>[    3.593311] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    3.593331] [drm:intel_dp_compute_config [i915]] DP link bw required 332880 available 432000
>[    3.593353] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    3.593376] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][modeset]
>[    3.593397] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.593418] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6463888, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
>[    3.593437] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.593455] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.593471] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    3.593491] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.593503] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    3.593522] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9
>[    3.593540] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[    3.593558] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.593576] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.593610] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.593627] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.593646] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.593665] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:65, fb = 1024x768 format = XR24 little-endian (0x34325258)
>[    3.593683] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1024+768 dst 0x0+1024+768
>[    3.593699] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    3.593717] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] disabled, scaler_id = -1
>[    3.593742] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500
>[    3.593770] [drm:intel_find_shared_dpll [i915]] [CRTC:31:pipe A] allocated DPLL 0
>[    3.593809] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[    3.593937] [drm:intel_edp_backlight_off.part.28 [i915]] 
>[    3.608181] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
>[    3.609855] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
>[    3.612313] Initializing HPQ6001 module
>[    3.612401] input: HP Wireless hotkeys as /devices/virtual/input/input13
>[    3.662620] Bluetooth: Core ver 2.22
>[    3.662641] NET: Registered protocol family 31
>[    3.662641] Bluetooth: HCI device and connection manager initialized
>[    3.662644] Bluetooth: HCI socket layer initialized
>[    3.662646] Bluetooth: L2CAP socket layer initialized
>[    3.662651] Bluetooth: SCO socket layer initialized
>[    3.687571] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    3.698327] Bluetooth: HCI UART driver ver 2.3
>[    3.698329] Bluetooth: HCI UART protocol H4 registered
>[    3.698329] Bluetooth: HCI UART protocol BCSP registered
>[    3.698330] Bluetooth: HCI UART protocol LL registered
>[    3.698331] Bluetooth: HCI UART protocol ATH3K registered
>[    3.698331] Bluetooth: HCI UART protocol Three-wire (H5) registered
>[    3.698361] Bluetooth: HCI UART protocol Intel registered
>[    3.698375] Bluetooth: HCI UART protocol Broadcom registered
>[    3.698376] Bluetooth: HCI UART protocol QCA registered
>[    3.698376] Bluetooth: HCI UART protocol AG6XX registered
>[    3.698377] Bluetooth: HCI UART protocol Marvell registered
>[    3.703457] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
>[    3.705205] usbcore: registered new interface driver btusb
>[    3.708530] Bluetooth: hci0: Firmware revision 0.1 build 103 week 50 2016
>[    3.714414] idma64 idma64.0: Found Intel integrated DMA 64-bit
>[    3.714855] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
>[    3.715150] idma64 idma64.1: Found Intel integrated DMA 64-bit
>[    3.715430] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    3.735440] mei_me 0000:00:16.0: enabling device (0004 -> 0006)
>[    3.795524] media: Linux media interface: v0.10
>[    3.800926] Linux video capture interface: v2.00
>[    3.801624] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    3.801665] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
>[    3.801713] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    3.806159] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
>[    3.806204] [drm:edp_panel_off [i915]] Wait for panel power off time
>[    3.806278] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control abcd0000
>[    3.809850] [drm] RC6 on
>[    3.850512] SSE version of gcm_enc/dec engaged.
>[    3.857642] [drm:wait_panel_status [i915]] Wait complete
>[    3.857676] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 31
>[    3.857699] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
>[    3.857727] [drm:skl_set_cdclk [i915]] Changing CDCLK to 337500 kHz (VCO 8100000 kHz)
>[    3.857755] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    3.857780] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:DDI A]
>[    3.857801] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DDI B]
>[    3.857823] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI C]
>[    3.857843] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[    3.857862] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[    3.857880] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[    3.857900] [drm:verify_single_dpll_state.isra.117 [i915]] DPLL 0
>[    3.857925] [drm:verify_single_dpll_state.isra.117 [i915]] DPLL 1
>[    3.857948] [drm:verify_single_dpll_state.isra.117 [i915]] DPLL 2
>[    3.857966] [drm:verify_single_dpll_state.isra.117 [i915]] DPLL 3
>[    3.857992] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 31
>[    3.858012] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[    3.858045] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[    3.858071] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    3.858576] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    3.858598] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    3.858618] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[    3.858644] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    3.870841] Intel(R) Wireless WiFi driver for Linux
>[    3.870842] Copyright(c) 2003- 2015 Intel Corporation
>[    3.871186] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
>[    3.889185] uvcvideo: Found UVC 1.00 device HP HD Camera (04ca:706e)
>[    3.894269] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
>[    3.894417] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
>[    3.894431] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
>[    3.894441] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
>[    3.895916] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
>[    3.895918] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
>[    3.895919] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
>[    3.896021] input: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input14
>[    3.896092] usbcore: registered new interface driver uvcvideo
>[    3.896093] USB Video Class driver (1.1.1)
>[    3.900084] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
>[    3.934332] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
>[    3.936734] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    3.937985] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    3.982397] kvm: disabled by bios
>[    4.007458] intel_rapl: Found RAPL domain package
>[    4.007460] intel_rapl: Found RAPL domain core
>[    4.007461] intel_rapl: Found RAPL domain uncore
>[    4.061089] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
>[    4.064761] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9d2c613bf3f0 (20160930/exresop-594)
>[    4.064770] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160930/dswexec-461)
>[    4.064776] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9d2c638ad208), AE_AML_OPERAND_TYPE (20160930/psparse-543)
>[    4.065115] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9d2c638ad078), AE_AML_OPERAND_TYPE (20160930/psparse-543)
>[    4.071609] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    4.074040] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    4.074063] thermal thermal_zone12: failed to read out thermal zone (-5)
>[    4.075885] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9d2c613bfee8 (20160930/exresop-594)
>[    4.075895] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160930/dswexec-461)
>[    4.075900] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9d2c638ad208), AE_AML_OPERAND_TYPE (20160930/psparse-543)
>[    4.075908] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9d2c638ad078), AE_AML_OPERAND_TYPE (20160930/psparse-543)
>[    4.085250] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9d2c613bfe10 (20160930/exresop-594)
>[    4.085260] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160930/dswexec-461)
>[    4.085265] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9d2c638ad208), AE_AML_OPERAND_TYPE (20160930/psparse-543)
>[    4.085274] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9d2c638ad078), AE_AML_OPERAND_TYPE (20160930/psparse-543)
>[    4.085350] input: HP WMI hotkeys as /devices/virtual/input/input15
>[    4.100525] ACPI Error: Attempt to CreateField of length zero (20160930/dsopcode-168)
>[    4.100535] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff9d2c638ad528), AE_AML_OPERAND_VALUE (20160930/psparse-543)
>[    4.100545] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9d2c638ad078), AE_AML_OPERAND_VALUE (20160930/psparse-543)
>[    4.164187] Adding 4087804k swap on /dev/sda3.  Priority:-1 extents:1 across:4087804k SSFS
>[    4.200255] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
>[    4.416263] input: SYNA3064:00 06CB:8265 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-SYNA3064:00/0018:06CB:8265.0001/input/input17
>[    4.416373] hid-multitouch 0018:06CB:8265.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3064:00 06CB:8265] on i2c-SYNA3064:00
>[    4.417876] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000
>[    4.417906] [drm:wait_panel_status [i915]] Wait complete
>[    4.417949] [drm:edp_panel_on [i915]] Wait for panel power on
>[    4.418021] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control abcd0003
>[    4.519546] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    4.519574] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    4.519596] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[    4.519643] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    4.618655] [drm:wait_panel_status [i915]] Wait complete
>[    4.618698] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    4.618764] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    4.619857] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    4.619876] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    4.619894] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.619913] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    4.620537] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    4.620554] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
>[    4.621474] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    4.621989] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.622020] [drm:intel_edp_backlight_on.part.27 [i915]] 
>[    4.622043] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    4.622115] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1500
>[    4.677672] [drm:intel_psr_enable [i915]] PSR not supported by this panel
>[    4.677696] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[    4.705600] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:47:eDP-1]
>[    4.705644] [drm:intel_atomic_commit_tail [i915]] [CRTC:31:pipe A]
>[    4.705684] [drm:verify_single_dpll_state.isra.117 [i915]] DPLL 0
>[    4.705705] [drm:intel_enable_sagv [i915]] Enabling the SAGV
>[    4.705803] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=1500/1500
>[    4.705830] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1500
>[    4.705994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[    4.706028] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    4.706057] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    4.706086] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    4.706108] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.706126] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.707230] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    4.708736] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    4.708746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[    4.708759] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    4.708769] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    4.708816] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    4.713088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[    4.713121] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    4.715310] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.715333] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.717535] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.717551] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.719733] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.719755] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.721754] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.721763] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.721770] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[    4.721786] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    4.721810] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    4.721824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    4.721831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[    4.721852] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    4.723889] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.723912] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.725748] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.725765] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.727965] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.727988] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.729767] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.729775] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.729781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[    4.729818] [drm:drm_mode_addfb2 [drm]] [FB:65]
>[    4.739026] snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing.
>[    4.739542] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
>[    4.739543] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.739544] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
>[    4.739545] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
>[    4.739546] snd_hda_codec_conexant hdaudioC0D0:    inputs:
>[    4.739548] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
>[    4.739549] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
>[    4.740497] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
>[    4.754176] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    4.754199] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    4.756314] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
>[    4.756373] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
>[    4.756425] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
>[    4.756473] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
>[    4.783797] random: crng init done
>[    4.845446] [drm:drm_mode_addfb2 [drm]] [FB:65]
>[    4.906186] audit: type=1400 audit(1524507616.800:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=660 comm="apparmor_parser"
>[    4.906188] audit: type=1400 audit(1524507616.800:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser"
>[    4.906189] audit: type=1400 audit(1524507616.800:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=660 comm="apparmor_parser"
>[    4.906190] audit: type=1400 audit(1524507616.800:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser"
>[    4.908095] audit: type=1400 audit(1524507616.800:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=659 comm="apparmor_parser"
>[    4.908097] audit: type=1400 audit(1524507616.800:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=659 comm="apparmor_parser"
>[    4.916214] audit: type=1400 audit(1524507616.808:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=663 comm="apparmor_parser"
>[    4.916216] audit: type=1400 audit(1524507616.808:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=663 comm="apparmor_parser"
>[    4.922875] audit: type=1400 audit(1524507616.816:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=664 comm="apparmor_parser"
>[    5.103402] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    5.103405] Bluetooth: BNEP filters: protocol multicast
>[    5.103409] Bluetooth: BNEP socket layer initialized
>[    5.339863] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    5.341879] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    5.344448] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    5.439118] [drm:drm_mode_addfb2 [drm]] [FB:65]
>[    5.463437] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    5.463831] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    5.485789] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created
>[    5.486982] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[    5.487011] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    5.487036] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    5.487060] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    5.487080] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    5.487100] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    5.487529] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    5.487899] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    5.487907] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[    5.487920] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    5.487930] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    5.488009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[    5.488032] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    5.490079] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.490102] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.492283] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.492299] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    5.493850] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.493873] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.496054] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.496066] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.496072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[    5.496161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    5.496186] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    5.496213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    5.496264] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[    5.496287] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    5.497958] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.497982] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.500163] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.500178] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    5.501830] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.501853] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.504036] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.504045] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.504051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[    5.504256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[    5.504281] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    5.504303] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    5.504326] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    5.504345] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    5.504363] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    5.504779] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    5.505146] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    5.505154] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[    5.505166] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    5.505176] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    5.506235] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[    5.506260] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    5.508459] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.508481] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.509845] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.509860] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    5.512043] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.512066] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.513837] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.513845] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.513852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[    5.513899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    5.513924] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    5.513937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    5.513953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[    5.513975] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    5.516162] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.516184] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.517923] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.517939] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    5.519327] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    5.524508] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.524532] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.525556] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    5.532265] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.532276] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.532282] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[    5.548297] r8169 0000:01:00.0 enp1s0: link down
>[    5.548326] r8169 0000:01:00.0 enp1s0: link down
>[    5.548401] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    5.685695] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    5.938373] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[    5.938391] [drm:drm_mode_setcrtc [drm]] [CRTC:31:pipe A]
>[    5.938403] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:47:eDP-1]
>[    5.971644] [drm:drm_mode_setcrtc [drm]] [CRTC:38:pipe B]
>[    5.971678] [drm:drm_mode_setcrtc [drm]] [CRTC:45:pipe C]
>[    6.706113] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    6.706139] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    6.707192] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    6.718095] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    6.723303] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    6.742559] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    6.745402] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    6.757909] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    6.760755] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    6.773937] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    6.777011] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    6.789910] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    6.792716] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    6.809913] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    6.908801] Bluetooth: RFCOMM TTY layer initialized
>[    6.908811] Bluetooth: RFCOMM socket layer initialized
>[    6.908816] Bluetooth: RFCOMM ver 1.11
>[    7.084820] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[    7.084851] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    7.084878] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    7.084901] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    7.084923] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    7.084943] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    7.085403] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    7.085791] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    7.085801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[    7.085815] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    7.085825] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    7.086125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[    7.086155] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    7.088304] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.088327] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.090004] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.090020] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    7.092297] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.092320] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.093747] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.093757] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.093763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[    7.093795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    7.093819] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    7.093834] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    7.093842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[    7.093864] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    7.096011] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.096034] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.097763] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.097780] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.099918] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.099939] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.101816] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.101832] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.101838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[    7.665531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[    7.665563] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[    7.665632] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[    7.665656] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    7.665676] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    7.665695] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    7.666124] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[    7.666503] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    7.666512] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[    7.666526] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[    7.666536] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[    7.666842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[    7.666870] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[    7.668833] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.668856] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.671002] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.671047] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    7.673222] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.673245] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.675397] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.675409] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.675416] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[    7.675445] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    7.675470] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    7.675484] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    7.675493] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[    7.675515] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[    7.677829] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.677853] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.679994] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.680010] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.681761] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.681784] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.683922] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.683931] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.683937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[    9.317202] r8169 0000:01:00.0 enp1s0: link up
>[    9.317212] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
>[   10.721691] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   10.721752] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   15.618866] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created
>[   15.621113] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed
>[   17.398691] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created
>[   17.406274] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed
>[   17.442063] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[   17.442094] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[   17.442120] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[   17.442143] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   17.442165] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   17.442185] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   17.442212] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[   17.442277] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   17.442709] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[   17.443081] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   17.443090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[   17.443103] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[   17.443113] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[   17.443446] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[   17.443474] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[   17.445717] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   17.445737] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   17.447180] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   17.447198] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   17.449385] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   17.449409] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   17.457772] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   17.457784] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   17.457791] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[   17.457822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[   17.457847] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[   17.457862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[   17.457871] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[   17.457893] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[   17.460056] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   17.460080] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   17.462134] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   17.462166] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   17.464508] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   17.464533] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   17.469671] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   17.469682] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   17.469689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[   17.597939] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created
>[   17.599338] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed
>[   17.609004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[   17.609035] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[   17.609060] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[   17.609083] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   17.609104] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   17.609125] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   17.609568] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[   17.609955] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   17.609963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[   17.609976] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[   17.609986] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[   17.610291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[   17.610319] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[   17.612464] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   17.612486] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   17.613941] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   17.613959] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   17.616125] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   17.616149] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   17.616207] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created
>[   17.617809] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   17.617818] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   17.617824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[   17.617863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[   17.617889] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[   17.617903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[   17.617913] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[   17.617936] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[   17.620119] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   17.620142] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   17.621864] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   17.621880] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   17.624067] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   17.624090] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   17.625750] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   17.625761] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   17.625769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[   17.630371] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed
>[   17.696601] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created
>[   17.735505] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[   17.735536] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[   17.735564] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[   17.735595] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   17.735616] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   17.735635] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   17.736066] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[   17.736454] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   17.736475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[   17.736488] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[   17.736498] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[   17.736807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[   17.736835] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[   17.738986] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   17.739010] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   17.740575] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   17.740591] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   17.742744] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   17.742768] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   17.744935] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   17.744946] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   17.744953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[   17.744984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[   17.745010] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[   17.745024] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[   17.745032] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[   17.745056] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[   17.747230] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   17.747254] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   17.749402] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   17.749419] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   17.751607] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   17.751631] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   17.753740] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   17.753750] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   17.753757] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[   18.066516] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[   18.066541] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[   18.068017] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   18.078053] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   18.081680] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   18.093928] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   18.097360] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   18.109908] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   18.113051] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   18.125904] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   18.130757] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   18.145930] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   18.149501] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   18.161931] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   18.320859] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1]
>[   18.320889] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
>[   18.320916] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[   18.320939] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   18.320962] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   18.320984] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   18.321456] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
>[   18.321918] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   18.321928] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes :
>[   18.321941] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[   18.321951] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 40 92470 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
>[   18.322264] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1]
>[   18.322293] [drm:intel_hdmi_detect [i915]] [CONNECTOR:56:HDMI-A-1]
>[   18.324464] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   18.324490] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   18.326010] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   18.326029] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   18.328187] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   18.328210] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   18.329787] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   18.329798] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   18.329804] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:HDMI-A-1] disconnected
>[   18.329836] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[   18.329861] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[   18.329876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[   18.329885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2]
>[   18.329909] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2]
>[   18.332054] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   18.332078] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   18.333939] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   18.333957] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   18.336136] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   18.336160] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   18.337782] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   18.337793] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   18.337800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected
>[   20.162510] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.258734] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.282107] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.353736] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.428409] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.442710] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.455292] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.497157] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.500108] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   20.587709] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.633164] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.666983] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   20.697389] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.733374] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.821834] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.850299] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   20.866929] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.883618] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.900262] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   20.916642] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.933328] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   20.950001] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   20.966648] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   20.983317] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.000261] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.016905] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.033513] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.050079] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.066751] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.083262] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.100232] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.116869] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.133541] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.150173] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.166822] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.183485] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.199910] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.216566] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.233520] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.250126] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.266783] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.283446] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.300115] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.316737] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.333197] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.349865] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.366528] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.383184] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.399844] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.416482] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.433167] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.449818] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.466485] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.473647] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   21.473713] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   21.483141] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.499808] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.516472] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.533138] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.549779] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.566443] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.583078] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.599774] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.616428] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.633080] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.649756] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.666412] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.683087] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.699730] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.716387] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.733052] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.749722] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.766373] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.783035] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.799705] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.816359] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.833017] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.849727] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.866345] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.882991] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.899671] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.916320] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.932990] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.949727] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   21.966309] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   21.982962] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   21.999667] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.016254] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.032938] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.049629] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.066348] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.083069] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.099737] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.116404] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.133062] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.149695] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.166383] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.183064] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.199690] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.216332] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.233027] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.249703] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.266345] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.282971] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.299657] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.316311] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.332966] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.349675] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.366293] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.382956] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.399621] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.416290] [drm:drm_mode_addfb2 [drm]] [FB:68]
>[   22.432940] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   22.449654] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   22.466274] [drm:drm_mode_addfb2 [drm]] [FB:68]

Actions: View

Attachments on bug 106195: 139023 | 139024 | 139025

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.