Attachment 139399 Details for Bug 106423 – just the drm logs

just the drm logs

just_the_drm_logs.txt (text/plain), 19.78 KB, created by ryanboehning on 2018-05-06 18:19:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ryanboehning

Created: 2018-05-06 18:19:04 UTC

Size: 19.78 KB

patch

obsolete

>kernel: [drm:drm_core_init [drm]] Initialized
>kernel: Setting dangerous option enable_guc - tainting kernel
>kernel: [drm:i915_driver_load [i915]] Found Kaby Lake PCH (KBP)
>kernel: [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
>kernel: [drm:__intel_uncore_early_sanitize [i915]] unclaimed mmio detected on uncore init, clearing
>kernel: [drm:i915_driver_load [i915]] ppgtt mode: 3
>kernel: [drm:intel_uc_sanitize_options [i915]] enable_guc=2 (submission:no huc:yes)
>kernel: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4078M
>kernel: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>kernel: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
>kernel: checking generic (e0000000 1fa4000) vs hw (e0000000 10000000)
>kernel: fb: switching to inteldrmfb from EFI VGA
>kernel: Console: switching to colour dummy device 80x25
>kernel: [drm] Replacing VGA console driver
>kernel: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>kernel: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc23a3018
>kernel: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>kernel: [drm:intel_opregion_setup [i915]] SWSCI supported
>kernel: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>kernel: [drm:intel_opregion_setup [i915]] ASLE supported
>kernel: [drm:intel_opregion_setup [i915]] ASLE extension supported
>kernel: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>kernel: [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>kernel: [drm] Driver supports precise vblank timestamp query.
>kernel: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>kernel: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE        ", BDB version 212
>kernel: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity inverted 0
>kernel: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>kernel: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>kernel: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>kernel: [drm:intel_bios_init [i915]] DRRS supported mode is static
>kernel: [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>kernel: [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>kernel: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
>kernel: [drm:intel_bios_init [i915]] DRRS State Enabled:0
>kernel: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
>kernel: [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>kernel: [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>kernel: [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>kernel: [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
>kernel: [drm:intel_bios_init [i915]] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>kernel: [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
>kernel: [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>kernel: [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz
>kernel: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>kernel: [drm:intel_power_well_enable [i915]] enabling power well 1
>kernel: [drm:intel_power_well_enable [i915]] enabling MISC IO power well
>kernel: [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, voltage level 3
>kernel: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
>kernel: [drm:skl_init_cdclk [i915]] Max dotclock rate: 675000 kHz
>kernel: [drm:intel_power_well_enable [i915]] enabling always-on
>kernel: [drm:intel_power_well_enable [i915]] enabling DC off
>kernel: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>kernel: [drm:intel_power_well_enable [i915]] enabling power well 2
>kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>kernel: [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
>kernel: [drm:drm_irq_install [drm]] irq=123
>kernel: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
>kernel: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
>kernel: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
>kernel: [drm:intel_modeset_init [i915]] 3 display pipes available.
>kernel: [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, voltage level 3
>kernel: [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>kernel: [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
>kernel: [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 0
>kernel: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>kernel: [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>kernel: [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
>kernel: [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>kernel: [drm:intel_edp_panel_vdd_sanitize [i915]] VDD left on by BIOS, adjusting state tracking
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel:  nvme0n1: p1 p2
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff
>kernel: [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
>kernel: [drm] failed to retrieve link info, disabling eDP
>kernel: [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>kernel: [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000
>kernel: [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>kernel: [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT)
>kernel: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>kernel: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
>kernel: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>kernel: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:37:pipe A] hw state readout: enabled
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe B] hw state readout: disabled
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe C] hw state readout: disabled
>kernel: [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
>kernel: [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1
>kernel: [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI B] hw state readout: enabled, pipe A
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DDI C] hw state readout: disabled, pipe A
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: enabled
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:65:HDMI-A-1] hw state readout: disabled
>kernel: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:68:HDMI-A-2] hw state readout: disabled
>kernel: [drm:drm_calc_timestamping_constants [drm]] crtc 37: hwmode: htotal 4000, vtotal 2222, vdisplay 2160
>kernel: [drm:drm_calc_timestamping_constants [drm]] crtc 37: clock 533249 kHz framedur 16667635 linedur 7501
>kernel: [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][setup_hw_state]
>kernel: [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80)
>kernel: [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
>kernel: [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 7766016, gmch_n: 8388608, link_m: 517734, link_n: 524288, tu: 64
>kernel: [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>kernel: [drm:intel_dump_pipe_config [i915]] requested mode:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3840x2160" 60 533249 3840 3888 3920 4000 2160 2163 2168 2222 0x40 0x9
>kernel: [drm:intel_dump_pipe_config [i915]] adjusted mode:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3840x2160" 60 533249 3840 3888 3920 4000 2160 2163 2168 2222 0x40 0x9
>kernel: [drm:intel_dump_pipe_config [i915]] crtc timings: 533249 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x40 flags: 0x9
>kernel: [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 3840x2160, pixel rate 533249
>kernel: [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>kernel: [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>kernel: [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>kernel: [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] planes on this crtc
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2A] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][setup_hw_state]
>kernel: [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>kernel: [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>kernel: [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>kernel: [drm:intel_dump_pipe_config [i915]] requested mode:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] adjusted mode:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>kernel: [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>kernel: [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>kernel: [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>kernel: [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] planes on this crtc
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 1B] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:41:plane 2B] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [CRTC:57:pipe C][setup_hw_state]
>kernel: [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>kernel: [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>kernel: [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>kernel: [drm:intel_dump_pipe_config [i915]] requested mode:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] adjusted mode:
>kernel: [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>kernel: [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>kernel: [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>kernel: [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>kernel: [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>kernel: [drm:intel_dump_pipe_config [i915]] planes on this crtc
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:48:plane 1C] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:51:plane 2C] disabled, scaler_id = -1
>kernel: [drm:intel_dump_pipe_config [i915]] [PLANE:54:cursor C] disabled, scaler_id = -1
>kernel: [drm:drm_mode_object_get [drm]] OBJ ID: 59 (2)
>kernel: [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling
>kernel: [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>kernel: [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>kernel: [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>kernel: [drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=3840x2160@32, offset=0, pitch 15360, size 0x1fa4000
>kernel: [drm:intel_plane_disable_noatomic [i915]] pipe A active planes 0x0
>kernel: [drm:intel_uc_fw_fetch [i915]] HuC fw fetch i915/kbl_huc_ver02_00_1810.bin
>kernel: [drm:intel_uc_fw_fetch [i915]] HuC fw fetch PENDING
>kernel: [drm:intel_uc_fw_fetch [i915]] HuC fw size 218688 ptr         (ptrval)
>kernel: [drm:intel_uc_fw_fetch [i915]] HuC fw version 2.0 (wanted 2.0)
>kernel: [drm:intel_uc_fw_fetch [i915]] HuC fw fetch SUCCESS
>kernel: [drm:intel_uc_fw_fetch [i915]] GuC fw fetch i915/kbl_guc_ver9_39.bin
>kernel: [drm:intel_uc_fw_fetch [i915]] GuC fw fetch PENDING
>kernel: [drm:intel_uc_fw_fetch [i915]] GuC fw size 147776 ptr         (ptrval)
>kernel: [drm:intel_uc_fw_fetch [i915]] GuC fw version 9.39 (wanted 9.39)
>kernel: [drm:intel_uc_fw_fetch [i915]] GuC fw fetch SUCCESS
>kernel: [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000]
>kernel: [drm:i915_gem_contexts_init [i915]] logical context support initialized
>kernel: [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfedff000
>kernel: [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0xfedcf000
>kernel: [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0xfedc8000
>kernel: [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0xfedc1000
>kernel: [drm:intel_engine_init_common [i915]] vecs0 hws offset: 0xfedba000
>kernel: [drm:intel_uc_fw_upload [i915]] HuC fw load i915/kbl_huc_ver02_00_1810.bin
>kernel: [drm:intel_uc_fw_upload [i915]] HuC fw load PENDING
>kernel: [drm:huc_ucode_xfer [i915]] HuC DMA transfer wait over with ret 0
>kernel: [drm:intel_uc_fw_upload [i915]] HuC fw load SUCCESS
>kernel: [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0)
>kernel: [drm:intel_uc_fw_upload [i915]] GuC fw load i915/kbl_guc_ver9_39.bin
>kernel: [drm:intel_uc_fw_upload [i915]] GuC fw load PENDING
>kernel: [drm:guc_fw_xfer [i915]] GuC DMA status 0x10
>kernel: [drm:guc_fw_xfer [i915]] GuC status 0x800470ec
>kernel: [drm:guc_fw_xfer [i915]] *ERROR* GuC firmware xfer error -110
>kernel: [drm:intel_uc_fw_upload [i915]] GuC fw load FAIL
>kernel: [drm] GuC: Failed to load firmware i915/kbl_guc_ver9_39.bin (error -110)
>kernel: i915 0000:00:02.0: GuC initialization failed -110
>kernel: [drm:guc_fw_xfer [i915]] *ERROR* GuC firmware xfer error -110
>kernel: [drm:intel_uc_fw_upload [i915]] GuC fw load FAIL
>kernel: [drm] GuC: Failed to load firmware i915/kbl_guc_ver9_39.bin (error -110)
>kernel: i915 0000:00:02.0: GuC initialization failed -110
>kernel: [drm:drm_irq_uninstall [drm]] irq=123
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>kernel: [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>kernel: i915 0000:00:02.0: [drm:i915_driver_load [i915]] Device initialization failed (-110)
>kernel: i915 0000:00:02.0: Please file a bug at https://bugs.freedesktop.org/enter_bug.cgi?product=DRI against DRM/Intel providing the dmesg log by booting with drm.debug=0xf
>kernel: i915: probe of 0000:00:02.0 failed with error -110
>

Actions: View

Attachments on bug 106423: 139398 | 139399

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.