Attachment 142454 Details for Bug 108703 – DMESG output with drm.debug enabled

DMESG output with drm.debug enabled

dmsg.log (text/x-log), 162.69 KB, created by Luke Schlather on 2018-11-13 18:51:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Luke Schlather

Created: 2018-11-13 18:51:59 UTC

Size: 162.69 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10
>[    0.000000] Linux version 4.15.0-38-generic (buildd@lcy01-amd64-023) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #41-Ubuntu SMP Wed Oct 10 10:59:38 UTC 2018 (Ubuntu 4.15.0-38.41-generic 4.15.18)
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-38-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=1 drm.debug=0xe log_buf_len=1M
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec30fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cec31000-0x00000000dae9efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: LENOVO 3434CTO/3434CTO, BIOS GCET99WW (2.59 ) 05/28/2014
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 080000000 mask FC0000000 write-back
>[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
>[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
>[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
>[    0.000000]   6 base 100000000 mask F00000000 write-back
>[    0.000000]   7 base 200000000 mask E00000000 write-back
>[    0.000000]   8 base 400000000 mask FE0000000 write-back
>[    0.000000]   9 base 41F000000 mask FFF000000 uncachable
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: last_pfn = 0xcec31 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [        (ptrval)]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
>[    0.000000] BRK [0x1e2f3f000, 0x1e2f3ffff] PGTABLE
>[    0.000000] BRK [0x1e2f40000, 0x1e2f40fff] PGTABLE
>[    0.000000] BRK [0x1e2f41000, 0x1e2f41fff] PGTABLE
>[    0.000000] BRK [0x1e2f42000, 0x1e2f42fff] PGTABLE
>[    0.000000] BRK [0x1e2f43000, 0x1e2f43fff] PGTABLE
>[    0.000000] BRK [0x1e2f44000, 0x1e2f44fff] PGTABLE
>[    0.000000] BRK [0x1e2f45000, 0x1e2f45fff] PGTABLE
>[    0.000000] BRK [0x1e2f46000, 0x1e2f46fff] PGTABLE
>[    0.000000] BRK [0x1e2f47000, 0x1e2f47fff] PGTABLE
>[    0.000000] BRK [0x1e2f48000, 0x1e2f48fff] PGTABLE
>[    0.000000] BRK [0x1e2f49000, 0x1e2f49fff] PGTABLE
>[    0.000000] log_buf_len: 1048576 bytes
>[    0.000000] early log buf free: 257148(98%)
>[    0.000000] RAMDISK: [mem 0x30f79000-0x347b3fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
>[    0.000000] ACPI: XSDT 0x00000000DAFFE170 0000C4 (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: DSDT 0x00000000DAFE7000 0110E1 (v01 LENOVO TP-GC    00002590 INTL 20061109)
>[    0.000000] ACPI: FACS 0x00000000DAF5A000 000040
>[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-GC    00002590 PTL  00000001)
>[    0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
>[    0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
>[    0.000000] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
>[    0.000000] ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: SSDT 0x00000000DAFDB000 000C79 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef  CpuPm    00003000 INTL 20061109)
>[    0.000000] ACPI: DMAR 0x00000000DAFD9000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
>[    0.000000] ACPI: UEFI 0x00000000DAFD8000 0002A6 (v01 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: DBG2 0x00000000DAFD7000 0000E9 (v00 LENOVO TP-GC    00002590 PTL  00000002)
>[    0.000000] ACPI: DMI detected: Lenovo ThinkPad X230
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x41e4ca000-0x41e4f4fff]
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041e5fffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
>[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
>[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000cec30fff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041e5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
>[    0.000000] On node 0 totalpages: 4116428
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13161 pages used for memmap
>[    0.000000]   DMA32 zone: 842288 pages, LIFO batch:31
>[    0.000000]   Normal zone: 51096 pages used for memmap
>[    0.000000]   Normal zone: 3270144 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 100 pages
>[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcec31000-0xdae9efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
>[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
>[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4052086
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-38-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=1 drm.debug=0xe log_buf_len=1M
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 16053328K/16465712K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 412384K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] ftrace: allocating 39175 entries in 154 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
>[    0.000000] vt handoff: transparent VT on vt#1
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20170831
>[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.000000] DMAR: Host address width 36
>[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
>[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
>[    0.000000] DMAR: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff
>[    0.000000] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
>[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
>[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
>[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
>[    0.000000] x2apic enabled
>[    0.000000] Switched APIC routing to cluster x2apic.
>[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.020000] tsc: Fast TSC calibration using PIT
>[    0.024000] tsc: Detected 2594.200 MHz processor
>[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.40 BogoMIPS (lpj=10376800)
>[    0.024000] pid_max: default: 32768 minimum: 301
>[    0.024000] Security Framework initialized
>[    0.024000] Yama: becoming mindful.
>[    0.024000] AppArmor: AppArmor initialized
>[    0.029224] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.030330] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.030381] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.030416] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.030625] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.030626] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.030629] mce: CPU supports 7 MCE banks
>[    0.030637] CPU0: Thermal monitoring enabled (TM1)
>[    0.030644] process: using mwait in idle threads
>[    0.030647] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>[    0.030647] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>[    0.030649] Spectre V2 : Mitigation: Full generic retpoline
>[    0.030650] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>[    0.030650] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.030651] Spectre V2 : Enabling Restricted Speculation for firmware calls
>[    0.030652] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
>[    0.030754] Freeing SMP alternatives memory: 36K
>[    0.032076] TSC deadline timer enabled
>[    0.032079] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
>[    0.032149] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.032169] ... version:                3
>[    0.032170] ... bit width:              48
>[    0.032170] ... generic registers:      4
>[    0.032171] ... value mask:             0000ffffffffffff
>[    0.032172] ... max period:             00007fffffffffff
>[    0.032172] ... fixed-purpose events:   3
>[    0.032173] ... event mask:             000000070000000f
>[    0.032207] Hierarchical SRCU implementation.
>[    0.033235] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.033251] smp: Bringing up secondary CPUs ...
>[    0.033328] x86: Booting SMP configuration:
>[    0.033329] .... node  #0, CPUs:      #1 #2 #3
>[    0.040058] smp: Brought up 1 node, 4 CPUs
>[    0.040058] smpboot: Max logical packages: 2
>[    0.040058] smpboot: Total of 4 processors activated (20753.60 BogoMIPS)
>[    0.042794] devtmpfs: initialized
>[    0.042794] x86/mm: Memory block size: 128MB
>[    0.044523] evm: security.selinux
>[    0.044524] evm: security.SMACK64
>[    0.044524] evm: security.SMACK64EXEC
>[    0.044525] evm: security.SMACK64TRANSMUTE
>[    0.044525] evm: security.SMACK64MMAP
>[    0.044526] evm: security.apparmor
>[    0.044526] evm: security.ima
>[    0.044527] evm: security.capability
>[    0.044542] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
>[    0.044542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.044542] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.044542] pinctrl core: initialized pinctrl subsystem
>[    0.044542] RTC time: 18:33:02, date: 11/13/18
>[    0.044542] NET: Registered protocol family 16
>[    0.044542] audit: initializing netlink subsys (disabled)
>[    0.044542] audit: type=2000 audit(1542133981.044:1): state=initialized audit_enabled=0 res=1
>[    0.044542] cpuidle: using governor ladder
>[    0.044542] cpuidle: using governor menu
>[    0.044542] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.044542] ACPI: bus type PCI registered
>[    0.044542] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.044542] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.044542] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.044542] PCI: Using configuration type 1 for base access
>[    0.044542] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.045202] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.045202] ACPI: Added _OSI(Module Device)
>[    0.045202] ACPI: Added _OSI(Processor Device)
>[    0.045202] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.045202] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.045202] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.045202] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[    0.045202] ACPI: Deleted _OSI(Windows 2012)
>[    0.045202] ACPI: EC: EC started
>[    0.045202] ACPI: EC: interrupt blocked
>[    0.045202] ACPI: \: Used as first EC
>[    0.045202] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.045202] ACPI: \: Used as boot ECDT EC to handle transactions
>[    0.053336] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.058861] ACPI: Dynamic OEM Table Load:
>[    0.058871] ACPI: SSDT 0xFFFF91558BA08000 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
>[    0.059406] ACPI: Dynamic OEM Table Load:
>[    0.059412] ACPI: SSDT 0xFFFF91558B9AB800 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
>[    0.059795] ACPI: Dynamic OEM Table Load:
>[    0.059800] ACPI: SSDT 0xFFFF91558B9A5200 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
>[    0.060884] ACPI: Interpreter enabled
>[    0.060904] ACPI: (supports S0 S3 S4 S5)
>[    0.060905] ACPI: Using IOAPIC for interrupt routing
>[    0.060928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.061249] ACPI: GPE 0x16 active on init
>[    0.061261] ACPI: Enabled 6 GPEs in block 00 to 3F
>[    0.066112] ACPI: Power Resource [PUBS] (on)
>[    0.066613] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
>[    0.067899] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
>[    0.071355] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
>[    0.071895] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.072036] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
>[    0.072172] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.072306] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.072442] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.072578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
>[    0.072713] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.072848] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.072952] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.072957] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.073141] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
>[    0.073226] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
>[    0.073228] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
>[    0.073230] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
>[    0.073231] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
>[    0.073436] PCI host bridge to bus 0000:00
>[    0.073438] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.073440] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.073441] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.073443] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
>[    0.073444] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
>[    0.073446] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.073454] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
>[    0.073541] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
>[    0.073552] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
>[    0.073558] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.073563] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
>[    0.073662] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
>[    0.073687] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
>[    0.073757] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.073827] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
>[    0.073853] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
>[    0.073928] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.073995] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
>[    0.074016] pci 0000:00:16.3: reg 0x10: [io  0x50b0-0x50b7]
>[    0.074025] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff]
>[    0.074158] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.074178] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
>[    0.074186] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
>[    0.074194] pci 0000:00:19.0: reg 0x18: [io  0x5080-0x509f]
>[    0.074256] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.074324] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
>[    0.074346] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
>[    0.074430] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.074502] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
>[    0.074524] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
>[    0.074600] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.074680] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
>[    0.074819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.074910] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
>[    0.075050] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.075139] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
>[    0.075278] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.075365] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
>[    0.075386] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
>[    0.075471] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.075540] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
>[    0.075711] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
>[    0.075730] pci 0000:00:1f.2: reg 0x10: [io  0x50a8-0x50af]
>[    0.075737] pci 0000:00:1f.2: reg 0x14: [io  0x50bc-0x50bf]
>[    0.075745] pci 0000:00:1f.2: reg 0x18: [io  0x50a0-0x50a7]
>[    0.075752] pci 0000:00:1f.2: reg 0x1c: [io  0x50b8-0x50bb]
>[    0.075759] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
>[    0.075767] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
>[    0.075808] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.075872] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
>[    0.075891] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
>[    0.075912] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.076185] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
>[    0.076211] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[    0.076248] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
>[    0.076511] pci 0000:02:00.0: supports D1 D2
>[    0.076513] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.088190] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.088195] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    0.088200] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf24fffff]
>[    0.088208] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
>[    0.088413] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
>[    0.088647] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
>[    0.089412] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.100153] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.100162] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
>[    0.100266] acpiphp: Slot [1] registered
>[    0.100276] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>[    0.100280] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>[    0.100285] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
>[    0.100293] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
>[    0.101708] ACPI: EC: interrupt unblocked
>[    0.101717] ACPI: EC: event unblocked
>[    0.101724] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.101725] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
>[    0.101916] SCSI subsystem initialized
>[    0.101931] libata version 3.00 loaded.
>[    0.101931] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.101931] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.101931] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.101931] vgaarb: loaded
>[    0.101931] ACPI: bus type USB registered
>[    0.101931] usbcore: registered new interface driver usbfs
>[    0.101931] usbcore: registered new interface driver hub
>[    0.101931] usbcore: registered new device driver usb
>[    0.101931] EDAC MC: Ver: 3.0.0
>[    0.101931] PCI: Using ACPI for IRQ routing
>[    0.101931] PCI: pci_cache_line_size set to 64 bytes
>[    0.101931] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>[    0.101931] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
>[    0.101931] e820: reserve RAM buffer [mem 0xcec31000-0xcfffffff]
>[    0.101931] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
>[    0.101931] NetLabel: Initializing
>[    0.101931] NetLabel:  domain hash size = 128
>[    0.101931] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.101931] NetLabel:  unlabeled traffic allowed by default
>[    0.104353] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.104358] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.104358] clocksource: Switched to clocksource hpet
>[    0.114140] VFS: Disk quotas dquot_6.6.0
>[    0.114157] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.114248] AppArmor: AppArmor Filesystem Enabled
>[    0.114276] pnp: PnP ACPI init
>[    0.114951] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.114954] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>[    0.114955] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>[    0.114957] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
>[    0.114958] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>[    0.114960] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>[    0.114961] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>[    0.114962] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>[    0.114964] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>[    0.114965] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>[    0.114967] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>[    0.114968] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>[    0.114970] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>[    0.114971] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>[    0.114973] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
>[    0.114975] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>[    0.114977] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
>[    0.114982] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.115102] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
>[    0.115121] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.115123] system 00:01: [io  0x0500-0x057f] has been reserved
>[    0.115124] system 00:01: [io  0x0800-0x080f] has been reserved
>[    0.115126] system 00:01: [io  0x15e0-0x15ef] has been reserved
>[    0.115127] system 00:01: [io  0x1600-0x167f] has been reserved
>[    0.115129] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.115131] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
>[    0.115133] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.115135] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.115136] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.115138] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.115139] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>[    0.115143] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.115205] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.115228] pnp 00:03: Plug and Play ACPI device, IDs LEN0070 PNP0303 (active)
>[    0.115248] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
>[    0.115306] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
>[    0.115873] pnp: PnP ACPI: found 6 devices
>[    0.122499] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.122543] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.122549] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    0.122555] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf24fffff]
>[    0.122560] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
>[    0.122569] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.122575] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
>[    0.122587] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>[    0.122590] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>[    0.122596] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
>[    0.122600] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
>[    0.122610] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.122611] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.122612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.122614] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
>[    0.122615] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
>[    0.122617] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>[    0.122618] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
>[    0.122620] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
>[    0.122621] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
>[    0.122623] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>[    0.122624] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
>[    0.122625] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
>[    0.122731] NET: Registered protocol family 2
>[    0.122915] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.123103] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.123202] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.123240] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.123279] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.123344] NET: Registered protocol family 1
>[    0.123356] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.124049] PCI: CLS 64 bytes, default 64
>[    0.124089] Unpacking initramfs...
>[    0.894362] Freeing initrd memory: 57580K
>[    0.894405] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.894408] software IO TLB [mem 0xcac31000-0xcec31000] (64MB) mapped at [        (ptrval)-        (ptrval)]
>[    0.894686] Scanning for low memory corruption every 60 seconds
>[    0.895305] Initialise system trusted keyrings
>[    0.895315] Key type blacklist registered
>[    0.895351] workingset: timestamp_bits=36 max_order=22 bucket_order=0
>[    0.896356] zbud: loaded
>[    0.896798] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    0.896944] fuse init (API version 7.26)
>[    0.898271] Key type asymmetric registered
>[    0.898272] Asymmetric key parser 'x509' registered
>[    0.898298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
>[    0.898338] io scheduler noop registered
>[    0.898339] io scheduler deadline registered
>[    0.898377] io scheduler cfq registered (default)
>[    0.898991] vesafb: mode is 1366x768x32, linelength=5504, pages=0
>[    0.898992] vesafb: scrolling: redraw
>[    0.898994] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.899004] vesafb: framebuffer at 0xe0000000, mapped to 0x        (ptrval), using 4160k, total 4160k
>[    0.899093] Console: switching to colour frame buffer device 170x48
>[    0.899111] fb0: VESA VGA frame buffer device
>[    0.899124] intel_idle: MWAIT substates: 0x21120
>[    0.899125] intel_idle: v0.4.1 model 0x3A
>[    0.899277] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.899457] ACPI: AC Adapter [AC] (on-line)
>[    0.899510] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    0.899540] ACPI: Lid Switch [LID]
>[    0.899571] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>[    0.899594] ACPI: Sleep Button [SLPB]
>[    0.899632] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.899655] ACPI: Power Button [PWRF]
>[    0.900691] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    0.901154] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.901155] ACPI: Thermal Zone [THM0] (61 C)
>[    0.901293] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    0.909685] ACPI: Battery Slot [BAT0] (battery present)
>[    0.923586] 0000:00:16.3: ttyS4 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A
>[    0.923850] Linux agpgart interface v0.103
>[    0.929311] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
>[    0.985437] loop: module loaded
>[    0.985588] libphy: Fixed MDIO Bus: probed
>[    0.985589] tun: Universal TUN/TAP device driver, 1.6
>[    0.985631] PPP generic driver version 2.4.2
>[    0.985680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.985682] ehci-pci: EHCI PCI platform driver
>[    0.985789] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.985794] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.985808] ehci-pci 0000:00:1a.0: debug port 2
>[    0.989710] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.989726] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
>[    1.004025] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.004070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.004072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.004073] usb usb1: Product: EHCI Host Controller
>[    1.004074] usb usb1: Manufacturer: Linux 4.15.0-38-generic ehci_hcd
>[    1.004076] usb usb1: SerialNumber: 0000:00:1a.0
>[    1.004187] hub 1-0:1.0: USB hub found
>[    1.004193] hub 1-0:1.0: 3 ports detected
>[    1.004427] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.004431] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.004445] ehci-pci 0000:00:1d.0: debug port 2
>[    1.008354] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.008365] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
>[    1.024026] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.024062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.024063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.024065] usb usb2: Product: EHCI Host Controller
>[    1.024066] usb usb2: Manufacturer: Linux 4.15.0-38-generic ehci_hcd
>[    1.024067] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.024167] hub 2-0:1.0: USB hub found
>[    1.024172] hub 2-0:1.0: 3 ports detected
>[    1.024309] ehci-platform: EHCI generic platform driver
>[    1.024318] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.024321] ohci-pci: OHCI PCI platform driver
>[    1.024327] ohci-platform: OHCI generic platform driver
>[    1.024333] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.024432] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.024437] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.025523] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
>[    1.025528] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.025659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.025660] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.025662] usb usb3: Product: xHCI Host Controller
>[    1.025663] usb usb3: Manufacturer: Linux 4.15.0-38-generic xhci-hcd
>[    1.025664] usb usb3: SerialNumber: 0000:00:14.0
>[    1.025764] hub 3-0:1.0: USB hub found
>[    1.025776] hub 3-0:1.0: 4 ports detected
>[    1.026251] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.026254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    1.026257] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
>[    1.026292] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.026293] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.026294] usb usb4: Product: xHCI Host Controller
>[    1.026296] usb usb4: Manufacturer: Linux 4.15.0-38-generic xhci-hcd
>[    1.026297] usb usb4: SerialNumber: 0000:00:14.0
>[    1.026392] hub 4-0:1.0: USB hub found
>[    1.026403] hub 4-0:1.0: 4 ports detected
>[    1.027000] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>[    1.030704] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.030708] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.030824] mousedev: PS/2 mouse device common for all mice
>[    1.031004] rtc_cmos 00:02: RTC can wake from S4
>[    1.031148] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.031181] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.031189] i2c /dev entries driver
>[    1.031194] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
>[    1.031259] device-mapper: uevent: version 1.0.3
>[    1.031323] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    1.031328] intel_pstate: Intel P-state driver initializing
>[    1.031481] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.031783] NET: Registered protocol family 10
>[    1.032211] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.034826] Segment Routing with IPv6
>[    1.034843] NET: Registered protocol family 17
>[    1.034882] Key type dns_resolver registered
>[    1.035087] RAS: Correctable Errors collector initialized.
>[    1.035111] microcode: sig=0x306a9, pf=0x10, revision=0x20
>[    1.035164] microcode: Microcode Update Driver: v2.2.
>[    1.035171] sched_clock: Marking stable (1035159681, 0)->(1014097333, 21062348)
>[    1.035369] registered taskstats version 1
>[    1.035376] Loading compiled-in X.509 certificates
>[    1.037433] Loaded X.509 cert 'Build time autogenerated kernel key: f3a9ae7fdf18cf897e7c53db8499a9c1252f0be9'
>[    1.037452] zswap: loaded using pool lzo/zbud
>[    1.040038] Key type big_key registered
>[    1.040041] Key type trusted registered
>[    1.041318] Key type encrypted registered
>[    1.041322] AppArmor: AppArmor sha1 policy hashing enabled
>[    1.057427] ima: Allocated hash algorithm: sha1
>[    1.180997] evm: HMAC attrs: 0x1
>[    1.181430]   Magic number: 10:945:594
>[    1.181588] rtc_cmos 00:02: setting system clock to 2018-11-13 18:33:03 UTC (1542133983)
>[    1.181751] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    1.181751] EDD information not available.
>[    1.183567] Freeing unused kernel memory: 2408K
>[    1.196007] Write protecting the kernel read-only data: 20480k
>[    1.196468] Freeing unused kernel memory: 2008K
>[    1.199594] Freeing unused kernel memory: 1896K
>[    1.205261] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    1.205261] x86/mm: Checking user space page tables
>[    1.210752] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    1.288087] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
>[    1.289754] pps_core: LinuxPPS API ver. 1 registered
>[    1.289756] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.291397] PTP clock support registered
>[    1.291419] sdhci: Secure Digital Host Controller Interface driver
>[    1.291419] sdhci: Copyright(c) Pierre Ossman
>[    1.293415] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
>[    1.293926] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
>[    1.296112] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    1.296113] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    1.296306] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.298786] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
>[    1.340027] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.348007] AVX version of gcm_enc/dec engaged.
>[    1.348008] AES CTR mode by8 optimization enabled
>[    1.360011] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.383928] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
>[    1.468585] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:69:d1:71
>[    1.468587] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.468626] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
>[    1.468667] ahci 0000:00:1f.2: version 3.0
>[    1.468887] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    1.469407] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    1.479017] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
>[    1.479023] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
>[    1.496799] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.496801] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.497262] hub 1-1:1.0: USB hub found
>[    1.497488] hub 1-1:1.0: 6 ports detected
>[    1.500652] scsi host0: ahci
>[    1.500779] scsi host1: ahci
>[    1.500920] scsi host2: ahci
>[    1.501003] scsi host3: ahci
>[    1.501080] scsi host4: ahci
>[    1.501151] scsi host5: ahci
>[    1.501183] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 28
>[    1.501186] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 28
>[    1.501186] ata3: DUMMY
>[    1.501187] ata4: DUMMY
>[    1.501188] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 28
>[    1.501189] ata6: DUMMY
>[    1.501339] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    1.502513] [drm:intel_detect_pch [i915]] Found PantherPoint PCH
>[    1.502549] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[    1.502709] [drm:intel_device_info_dump [i915]] i915 device info: platform=IVYBRIDGE gen=7 pciid=0x0166 rev=0x09
>[    1.502738] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: yes
>[    1.502767] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no
>[    1.502796] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    1.502816] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no
>[    1.502833] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes
>[    1.502849] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no
>[    1.502865] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no
>[    1.502880] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no
>[    1.502895] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: no
>[    1.502917] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[    1.502942] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no
>[    1.502965] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes
>[    1.502989] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no
>[    1.503012] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[    1.503035] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no
>[    1.503056] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[    1.503070] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    1.503084] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: yes
>[    1.503098] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes
>[    1.503112] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no
>[    1.503125] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_preemption: no
>[    1.503139] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    1.503152] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    1.503166] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: no
>[    1.503180] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    1.503193] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: yes
>[    1.503207] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no
>[    1.503220] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: no
>[    1.503234] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[    1.503247] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no
>[    1.503261] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    1.503274] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    1.503288] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    1.503301] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    1.503315] [drm:intel_device_info_dump [i915]] i915 device info: has_ipc: no
>[    1.503465] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000
>[    1.503479] [drm:intel_device_info_runtime_init [i915]] slice total: 0
>[    1.503493] [drm:intel_device_info_runtime_init [i915]] subslice total: 0
>[    1.503507] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000
>[    1.503520] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0
>[    1.503534] [drm:intel_device_info_runtime_init [i915]] EU total: 0
>[    1.503547] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0
>[    1.503560] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    1.503574] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[    1.503587] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n
>[    1.503607] [drm:i915_driver_load [i915]] ppgtt mode: 1
>[    1.503624] [drm:i915_driver_load [i915]] use GPU semaphores? yes
>[    1.503632] [drm] Memory usable by graphics device = 2048M
>[    1.503655] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    1.503677] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[    1.503678] checking generic (e0000000 410000) vs hw (e0000000 10000000)
>[    1.503679] fb: switching to inteldrmfb from VESA VGA
>[    1.503696] Console: switching to colour dummy device 80x25
>[    1.503745] [drm] Replacing VGA console driver
>[    1.503782] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>[    1.503815] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xdaf55018
>[    1.503848] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    1.503872] [drm:intel_opregion_setup [i915]] SWSCI supported
>[    1.509500] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000483, SBCB callbacks 00000203
>[    1.509530] [drm:intel_opregion_setup [i915]] ASLE supported
>[    1.509557] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[    1.509583] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    1.509676] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>[    1.509678] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.509679] [drm] Driver supports precise vblank timestamp query.
>[    1.509710] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[    1.509738] [drm:intel_bios_init [i915]] VBT signature "$VBT SNB/IVB-MOBILE ", BDB version 168
>[    1.509767] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.509793] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    1.509822] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-22)
>[    1.509849] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    1.509874] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    1.509900] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    1.509916] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 0 75200 1366 1414 1478 1582 768 772 779 792 0x8 0xa
>[    1.509942] [drm:intel_bios_init [i915]] VBT initial LVDS value 200300
>[    1.509968] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255, controller 0
>[    1.509994] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables:
>[    1.510007] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.510032] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[    1.510057] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
>[    1.510102] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    1.510142] [drm:intel_update_rawclk [i915]] rawclk rate: 125000 kHz
>[    1.510173] [drm:intel_power_well_enable [i915]] enabling always-on
>[    1.510432] random: fast init done
>[    1.510601] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.510623] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.510625] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.510960] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    1.510986] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 12 (1.2 usec)
>[    1.511006] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec)
>[    1.511024] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 16 (8.0 usec)
>[    1.511041] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 32 (16.0 usec)
>[    1.511057] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 12 (1.2 usec)
>[    1.511073] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec)
>[    1.511088] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 16 (8.0 usec)
>[    1.511104] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 32 (16.0 usec)
>[    1.511119] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 12 (1.2 usec)
>[    1.511133] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec)
>[    1.511148] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 16 (8.0 usec)
>[    1.511162] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 64 (32.0 usec)
>[    1.511193] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    1.511247] [drm:intel_update_cdclk [i915]] Current CD clock rate: 400000 kHz, VCO: 0 kHz, ref: 0 kHz
>[    1.511272] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz
>[    1.511296] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 360000 kHz
>[    1.511299] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.511641] [drm:intel_lvds_init [i915]] LVDS PPS:t1+t2 300 t3 300 t4 5000 t5 3000 tx 2000 divider 6249 port 0 powerdown_on_reset 1
>[    1.516453] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.516458] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.516695] hub 2-1:1.0: USB hub found
>[    1.516791] hub 2-1:1.0: 8 ports detected
>[    1.550325] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    1.550348] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    1.550391] [drm:intel_lvds_init [i915]] using preferred mode from EDID: 
>[    1.550405] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    1.550446] [drm:intel_panel_setup_backlight [i915]] Connector LVDS-1 backlight initialized, enabled, brightness 4437/4437
>[    1.550479] [drm:intel_lvds_init [i915]] detected single-link lvds configuration
>[    1.550530] [drm:intel_crt_reset [i915]] crt adpa set to 0xf40000
>[    1.550565] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.580039] [drm:intel_sdvo_read_byte [i915]] i2c transfer returned -6
>[    1.580061] [drm:intel_sdvo_init [i915]] No SDVO device found on SDVOB
>[    1.580168] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.580193] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    1.580218] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default)
>[    1.580248] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    1.580271] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default)
>[    1.580305] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    1.580325] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default)
>[    1.580351] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    1.580371] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default)
>[    1.580402] [drm:intel_init_pch_refclk [i915]] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1
>[    1.580429] [drm:intel_init_pch_refclk [i915]] Using SSC on panel
>[    1.580872] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    1.580895] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    1.580917] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    1.580939] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:37:pipe A] hw state readout: enabled
>[    1.580961] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
>[    1.580982] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
>[    1.581002] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
>[    1.581023] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe B] hw state readout: disabled
>[    1.581043] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
>[    1.581062] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
>[    1.581081] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
>[    1.581101] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe C] hw state readout: disabled
>[    1.581127] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
>[    1.581152] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
>[    1.581177] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:59:LVDS] hw state readout: enabled, pipe A
>[    1.581199] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:CRT] hw state readout: disabled, pipe A
>[    1.581221] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:66:HDMI B] hw state readout: disabled, pipe A
>[    1.581243] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:71:DP B] hw state readout: disabled, pipe A
>[    1.581265] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:73:HDMI C] hw state readout: disabled, pipe A
>[    1.581286] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:75:DP C] hw state readout: disabled, pipe A
>[    1.581307] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:58:LVDS-1] hw state readout: enabled
>[    1.581328] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:64:VGA-1] hw state readout: disabled
>[    1.581348] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:67:HDMI-A-1] hw state readout: disabled
>[    1.581369] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:72:DP-1] hw state readout: disabled
>[    1.581390] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:74:HDMI-A-2] hw state readout: disabled
>[    1.581411] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:76:DP-2] hw state readout: disabled
>[    1.581442] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][setup_hw_state]
>[    1.581461] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[    1.581479] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 0
>[    1.581497] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 5256861, gmch_n: 8388608, link_m: 146023, link_n: 524288, tu: 64
>[    1.581515] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    1.581532] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    1.581543] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75238 1366 1414 1478 1582 768 772 779 792 0x40 0x9
>[    1.581561] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    1.581569] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75238 1366 1414 1478 1582 768 772 779 792 0x40 0x9
>[    1.581588] [drm:intel_dump_pipe_config [i915]] crtc timings: 75238 1366 1414 1478 1582 768 772 779 792, type: 0x40 flags: 0x9
>[    1.581605] [drm:intel_dump_pipe_config [i915]] port clock: 75238, pipe src size: 1366x768, pixel rate 75238
>[    1.581622] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
>[    1.581638] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    1.581660] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x30d07
>[    1.581677] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    1.581694] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0
>[    1.581710] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[    1.581726] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0
>[    1.581742] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][setup_hw_state]
>[    1.581757] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[    1.581773] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    1.581789] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    1.581804] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    1.581812] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.581829] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    1.581837] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.581854] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.581870] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    1.581886] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.581901] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    1.581922] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    1.581939] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    1.581954] [drm:intel_dump_pipe_config [i915]] [PLANE:38:primary B] disabled, scaler_id = 0
>[    1.581970] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite B] disabled, scaler_id = 0
>[    1.581985] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = 0
>[    1.582001] [drm:intel_dump_pipe_config [i915]] [CRTC:57:pipe C][setup_hw_state]
>[    1.582016] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[    1.582031] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    1.582046] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    1.582060] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    1.582069] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.582084] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    1.582092] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.582109] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.582124] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    1.582139] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.582154] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    1.582176] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    1.582193] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    1.582209] [drm:intel_dump_pipe_config [i915]] [PLANE:48:primary C] disabled, scaler_id = 0
>[    1.582225] [drm:intel_dump_pipe_config [i915]] [PLANE:51:sprite C] disabled, scaler_id = 0
>[    1.582241] [drm:intel_dump_pipe_config [i915]] [PLANE:54:cursor C] disabled, scaler_id = 0
>[    1.582264] [drm:ironlake_get_initial_plane_config [i915]] pipe A with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000
>[    1.582288] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=408000
>[    1.582317] [drm:intel_alloc_initial_plane_obj.isra.122 [i915]] initial plane fb obj         (ptrval)
>[    1.582352] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    1.582395] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null)
>[    1.582416] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null)
>[    1.582758] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [409000, 80000000]
>[    1.584635] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00
>[    1.584655] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000
>[    1.584679] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    1.584912] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x7fdfd000
>[    1.584954] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfc000
>[    1.585153] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x7fdfb000
>[    1.585250] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x7fdfa000
>[    1.585311] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[    1.585360] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1200MHz, overclock: 1200MHz
>[    1.585408] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    1.585432] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    1.585453] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    1.585473] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    1.585493] [drm:intel_fbdev_init [i915]] pipe A area: 1366x768, bpp: 32, size: 4227072
>[    1.585513] [drm:intel_fbdev_init [i915]] fb big enough for plane A (4227072 >= 4227072)
>[    1.585532] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
>[    1.585550] [drm:intel_fbdev_init [i915]] pipe C not active, skipping
>[    1.585568] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[    1.585616] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=0
>[    1.585642] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000
>[    1.585932] [drm:intel_backlight_device_register [i915]] Connector LVDS-1 backlight sysfs interface registered
>[    1.586011] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    1.586158] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    1.586228] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
>[    1.586314] [drm:intel_opregion_register [i915]] 6 outputs detected
>[    1.586780] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[    1.587269] [drm:asle_work [i915]] bclp = 0x80000006
>[    1.587949] acpi device:00: registered as cooling_device4
>[    1.588038] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    1.588312] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    1.595670] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[    1.595702] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[    1.597865] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    1.597897] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    1.600061] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    1.600105] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    1.600143] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.600175] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.601010] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    1.601036] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.601060] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.601072] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:64:VGA-1] status updated from unknown to disconnected
>[    1.601105] [drm:asle_work [i915]] updating opregion backlight 6/255
>[    1.601148] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[    1.601178] [drm:asle_work [i915]] PWM freq is not supported
>[    1.601206] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[    1.601233] [drm:asle_work [i915]] No request on ASLC interrupt 0x00010000
>[    1.660598] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    1.692018] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.692051] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.692079] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.724012] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.724041] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.786000] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    1.788005] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
>[    1.803999] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
>[    1.814977] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.815637] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    1.815639] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.815991] ata1.00: NCQ Send/Recv Log not supported
>[    1.815993] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
>[    1.815994] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.816007] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    1.816013] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] status updated from unknown to disconnected
>[    1.816044] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[    1.816051] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:72:DP-1] status updated from unknown to disconnected
>[    1.816077] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[    1.816355] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    1.816368] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.816609] ata1.00: NCQ Send/Recv Log not supported
>[    1.816674] ata1.00: configured for UDMA/133
>[    1.816899] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  5B0Q PQ: 0 ANSI: 5
>[    1.817077] ata1.00: Enabling discard_zeroes_data
>[    1.817117] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.817204] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
>[    1.817223] sd 0:0:0:0: [sda] Write Protect is off
>[    1.817225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.817260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.817394] ata1.00: Enabling discard_zeroes_data
>[    1.817867]  sda: sda1 sda2 < sda5 >
>[    1.818051] ata1.00: Enabling discard_zeroes_data
>[    1.818258] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.818287] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.818287] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.820337] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.820356] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.820389] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.820421] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    1.821157] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.821183] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    1.823243] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.823270] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.825392] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.825401] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    1.825407] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] status updated from unknown to disconnected
>[    1.825436] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[    1.825447] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:76:DP-2] status updated from unknown to disconnected
>[    1.825488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[    1.825523] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[    1.825529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] status updated from unknown to connected
>[    1.825551] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    1.825574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[    1.825585] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    1.825590] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[    1.825624] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[    1.825654] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[    1.825677] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[    1.827817] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    1.827848] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    1.830001] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    1.830019] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    1.830053] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.830083] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.831013] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    1.831038] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.831062] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.831068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[    1.831074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[    1.831106] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[    1.889013] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    1.913857] usb 2-1.5: New USB device found, idVendor=056a, idProduct=0090
>[    1.913860] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.913861] usb 2-1.5: Product: ISD-V4
>[    1.913862] usb 2-1.5: Manufacturer: Tablet
>[    1.917324] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.920012] tsc: Refined TSC clocksource calibration: 2594.108 MHz
>[    1.920027] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647e07037, max_idle_ns: 440795273876 ns
>[    1.920052] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.920088] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.920117] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.921121] usbcore: registered new interface driver usbhid
>[    1.921122] usbhid: USB HID core driver
>[    1.923955] input: Wacom ISDv4 90 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:0090.0001/input/input7
>[    1.924085] wacom 0003:056A:0090.0001: hidraw0: USB HID v1.10 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
>[    1.936665] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
>[    1.936667] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.936669] usb 1-1.3: Product: Biometric Coprocessor
>[    1.936670] usb 1-1.3: Manufacturer: Auth
>[    1.952019] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.952055] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.012680] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    2.015993] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
>[    2.044001] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.044006] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[    2.044011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[    2.044042] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[    2.044047] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[    2.044051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[    2.044076] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[    2.046220] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.046257] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.048416] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.048435] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.048467] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.048496] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    2.049252] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.049277] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    2.051419] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.051450] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.053602] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.053613] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.053618] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[    2.053625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[    2.053660] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[    2.053670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[    2.053675] [drm:drm_setup_crtcs [drm_kms_helper]] connector 58 enabled? yes
>[    2.053679] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no
>[    2.053683] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? no
>[    2.053686] [drm:drm_setup_crtcs [drm_kms_helper]] connector 72 enabled? no
>[    2.053689] [drm:drm_setup_crtcs [drm_kms_helper]] connector 74 enabled? no
>[    2.053692] [drm:drm_setup_crtcs [drm_kms_helper]] connector 76 enabled? no
>[    2.053727] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.053735] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 58
>[    2.053738] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 58 0
>[    2.053742] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
>[    2.053745] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    2.053752] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 37 (0,0)
>[    2.053787] [drm:intelfb_create [i915]] re-using BIOS fb
>[    2.053824] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00000000
>[    2.053946] fbcon: inteldrmfb (fb0) is primary device
>[    2.054019] Console: switching to colour frame buffer device 170x48
>[    2.054046] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.131357] ata2: SATA link down (SStatus 0 SControl 300)
>[    2.132669] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
>[    2.132672] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.132675] usb 1-1.6: Product: Integrated Camera
>[    2.132676] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
>[    2.146495] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
>[    2.184738] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
>[    2.260918] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
>[    2.260926] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>[    2.309300] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>[    2.447233] ata5: SATA link down (SStatus 0 SControl 300)
>[    2.447377] [drm:drm_fb_helper_hotplug_event.part.31 [drm_kms_helper]] 
>[    2.447386] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    2.447394] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[    2.447435] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[    2.447459] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.447501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[    2.447521] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    2.447530] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[    2.447571] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[    2.447617] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[    2.447659] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[    2.450061] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    2.450081] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    2.452031] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    2.452049] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    2.452076] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.452104] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.452938] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    2.452958] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.452975] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.452982] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[    2.452987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[    2.453005] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[    2.512070] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    2.544018] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.544046] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.544065] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.576020] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.576043] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.637853] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    2.668000] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.668005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[    2.668011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[    2.668030] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[    2.668039] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[    2.668043] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[    2.668059] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[    2.670206] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.670229] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.672378] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.672395] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.672418] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.672439] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    2.673262] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.673278] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    2.675425] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.675448] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.677520] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.677530] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.677536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[    2.677543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[    2.677566] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[    2.677576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[    2.677581] [drm:drm_setup_crtcs [drm_kms_helper]] connector 58 enabled? yes
>[    2.677585] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no
>[    2.677588] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? no
>[    2.677591] [drm:drm_setup_crtcs [drm_kms_helper]] connector 72 enabled? no
>[    2.677595] [drm:drm_setup_crtcs [drm_kms_helper]] connector 74 enabled? no
>[    2.677598] [drm:drm_setup_crtcs [drm_kms_helper]] connector 76 enabled? no
>[    2.677622] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.677628] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 58
>[    2.677632] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 58 0
>[    2.677635] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
>[    2.677638] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config
>[    2.677649] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 37 (0,0)
>[    2.677714] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[    2.677724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[    2.677746] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[    2.677768] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[    2.677791] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[    2.677809] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    2.677829] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[    2.677848] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[    2.677866] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[    2.677883] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[    2.677899] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.677914] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.677930] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    2.677946] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.677958] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    2.677975] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[    2.677992] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[    2.678009] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.678024] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.678044] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x30d07
>[    2.678060] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.678079] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:78, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[    2.678096] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[    2.678112] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0
>[    2.678136] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[    2.678165] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[    2.678181] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[    2.678223] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    2.678247] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    2.844322] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on RC6p on RC6pp off
>[    2.919089] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 37
>[    2.919110] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A
>[    2.919339] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[    2.919353] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[    2.919366] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[    2.919378] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[    2.919390] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[    2.919402] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[    2.919416] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[    2.919435] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[    2.919459] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A
>[    2.920019] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    2.920193] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR before link train 0x700
>[    2.920215] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x700
>[    2.920228] [drm:ivb_manual_fdi_link_train [i915]] FDI train 1 done, level 0.
>[    2.920249] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x600
>[    2.920264] [drm:ivb_manual_fdi_link_train [i915]] FDI train 2 done, level 0.
>[    2.920275] [drm:ivb_manual_fdi_link_train [i915]] FDI train done.
>[    2.920293] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 37
>[    2.920306] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A
>[    2.940144] clocksource: Switched to clocksource tsc
>[    3.017003] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[    3.259014] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
>[    3.439630] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    3.439658] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[    3.472737] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[    3.472767] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[    3.472804] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[    3.472875] [drm:drm_fb_helper_hotplug_event.part.31 [drm_kms_helper]] 
>[    3.472919] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[    3.472928] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    3.472947] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.472979] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[    3.472996] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    3.473005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[    3.473041] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[    3.473059] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.473089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[    3.473105] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[    3.473112] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[    3.473144] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[    3.473181] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[    3.473207] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[    3.475345] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.475369] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.477509] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.477527] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    3.477550] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.477571] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.478397] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    3.478412] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.478427] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.478433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[    3.478439] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[    3.478454] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[    3.538004] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.568006] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.568028] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.568045] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    3.600002] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.600019] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    3.661632] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.692000] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.692006] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[    3.692013] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[    3.692035] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[    3.692045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[    3.692049] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[    3.692067] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[    3.694208] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.694231] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.696374] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.696391] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.696413] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.696433] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    3.697260] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.697277] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    3.699418] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.699441] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.701583] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.701594] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.701599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[    3.701606] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[    3.701629] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[    3.701640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[    3.701645] [drm:drm_setup_crtcs [drm_kms_helper]] connector 58 enabled? yes
>[    3.701648] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no
>[    3.701652] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? no
>[    3.701655] [drm:drm_setup_crtcs [drm_kms_helper]] connector 72 enabled? no
>[    3.701658] [drm:drm_setup_crtcs [drm_kms_helper]] connector 74 enabled? no
>[    3.701662] [drm:drm_setup_crtcs [drm_kms_helper]] connector 76 enabled? no
>[    3.701686] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    3.701692] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 58
>[    3.701696] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 58 0
>[    3.701699] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
>[    3.701702] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config
>[    3.701717] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 37 (0,0)
>[    3.708577] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[    3.708605] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[    3.708627] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[    3.708641] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[    3.710784] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.710806] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.712950] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.712968] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    3.712989] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.713009] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.713830] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[    3.713845] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.713860] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.713866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[    3.713886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[    3.713902] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[    3.773554] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.804007] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.804029] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.804047] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    3.836000] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.836017] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    3.897714] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.928001] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.928007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[    3.928029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[    3.928051] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[    3.928060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[    3.928067] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[    3.928086] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[    3.930230] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.930252] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.932388] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.932405] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.932427] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.932447] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    3.933269] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.933285] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    3.935428] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.935450] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.937583] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.937594] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.937600] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[    3.937625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[    3.937652] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[    3.937672] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[    3.937722] [drm:drm_mode_addfb2 [drm]] [FB:80]
>[    4.040275] [drm:drm_mode_addfb2 [drm]] [FB:80]
>[    4.040317] [drm:drm_mode_setcrtc [drm]] [CRTC:37:pipe A]
>[    4.040327] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:58:LVDS-1]
>[    4.057852] [drm:drm_mode_setcrtc [drm]] [CRTC:37:pipe A]
>[    4.057866] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:58:LVDS-1]
>[    8.062772] NET: Registered protocol family 38
>[    8.265351] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    8.396960] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    8.403102] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
>[    8.420252] systemd[1]: Detected architecture x86-64.
>[    8.422141] systemd[1]: Set hostname to <nafal>.
>[    8.509696] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    8.509725] systemd[1]: Reached target Remote File Systems.
>[    8.509873] systemd[1]: Created slice System Slice.
>[    8.509980] systemd[1]: Listening on Journal Socket.
>[    8.510502] systemd[1]: Started Read required files in advance.
>[    8.511386] systemd[1]: Mounting Kernel Debug File System...
>[    8.511522] systemd[1]: Listening on udev Kernel Socket.
>[    8.525627] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
>[    8.541555] lp: driver loaded but no devices found
>[    8.544884] ppdev: user-space parallel port driver
>[    8.629247] systemd-journald[459]: Received request to flush runtime journal from PID 1
>[    8.797618] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[    8.812873] [drm:asle_work [i915]] bclp = 0x80000021
>[    8.812903] [drm:asle_work [i915]] updating opregion backlight 33/255
>[    8.812996] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 574
>[    8.813024] [drm:asle_work [i915]] PWM freq is not supported
>[    8.869174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    8.897722] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170831/utaddress-247)
>[    8.897729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.897732] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
>[    8.897736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.897737] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
>[    8.897741] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.897742] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
>[    8.897746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.897747] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    8.898878] media: Linux media interface: v0.10
>[    8.906086] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    8.911852] Non-volatile memory driver v1.3
>[    8.915804] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    8.920106] thinkpad_acpi: ThinkPad ACPI Extras v0.25
>[    8.920107] thinkpad_acpi: http://ibm-acpi.sf.net/
>[    8.920108] thinkpad_acpi: ThinkPad BIOS GCET99WW (2.59 ), EC unknown
>[    8.920109] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 3434CTO
>[    8.921171] thinkpad_acpi: radio switch found; radios are enabled
>[    8.921274] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
>[    8.921291] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>[    8.921292] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>[    8.922161] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    8.924949] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
>[    8.930633] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
>[    8.956970] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    8.956973] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    8.956975] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
>[    8.956976] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    8.956977] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    8.956979] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    8.956981] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
>[    8.956983] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[    8.961627] Intel(R) Wireless WiFi driver for Linux
>[    8.961628] Copyright(c) 2003- 2015 Intel Corporation
>[    8.961861] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    8.962644] Linux video capture interface: v2.00
>[    8.986593] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
>[    8.998194] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    9.000469] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    9.001501] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[    9.001562] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[    9.001618] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>[    9.001676] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[    9.001732] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
>[    9.001789] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>[    9.018987] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
>[    9.018989] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
>[    9.018990] RAPL PMU: hw unit of domain package 2^-16 Joules
>[    9.018991] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
>[    9.024509] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    9.024534] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    9.025986] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
>[    9.025988] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[    9.025989] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
>[    9.025992] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
>[    9.081375] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
>[    9.093692] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
>[    9.093695] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
>[    9.093697] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
>[    9.093698] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
>[    9.096054] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
>[    9.097984] usbcore: registered new interface driver uvcvideo
>[    9.097986] USB Video Class driver (1.1.1)
>[    9.097988] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[    9.109922] intel_rapl: Found RAPL domain package
>[    9.109924] intel_rapl: Found RAPL domain core
>[    9.109925] intel_rapl: Found RAPL domain uncore
>[    9.109930] intel_rapl: RAPL package 0 domain package locked by BIOS
>[    9.301838] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
>[    9.321676] Adding 1003516k swap on /dev/mapper/xubuntu--vg-swap_1.  Priority:-2 extents:1 across:1003516k SSFS
>[    9.399019] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    9.418841] random: crng init done
>[    9.418843] random: 7 urandom warning(s) missed due to ratelimiting
>[    9.487605] audit: type=1400 audit(1542133991.798:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=812 comm="apparmor_parser"
>[    9.487610] audit: type=1400 audit(1542133991.798:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=812 comm="apparmor_parser"
>[    9.489358] audit: type=1400 audit(1542133991.802:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=811 comm="apparmor_parser"
>[    9.489362] audit: type=1400 audit(1542133991.802:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=811 comm="apparmor_parser"
>[    9.489365] audit: type=1400 audit(1542133991.802:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=811 comm="apparmor_parser"
>[    9.489367] audit: type=1400 audit(1542133991.802:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=811 comm="apparmor_parser"
>[    9.490589] audit: type=1400 audit(1542133991.802:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=810 comm="apparmor_parser"
>[    9.490592] audit: type=1400 audit(1542133991.802:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=810 comm="apparmor_parser"
>[    9.491440] audit: type=1400 audit(1542133991.802:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=815 comm="apparmor_parser"
>[    9.491444] audit: type=1400 audit(1542133991.802:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=815 comm="apparmor_parser"
>[    9.659763] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[   10.106005] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[   10.150159] [drm:drm_mode_addfb2 [drm]] [FB:79]
>[   10.206732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[   10.206768] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[   10.206787] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[   10.206812] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[   10.206826] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[   10.206923] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[   10.206950] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[   10.206982] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[   10.207005] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[   10.209057] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   10.209083] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   10.211133] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   10.211150] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   10.211178] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   10.211205] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   10.212051] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   10.212079] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   10.212106] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[   10.212116] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[   10.212183] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[   10.212210] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[   10.272099] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   10.304019] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   10.304047] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   10.304065] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   10.320252] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[   10.323678] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[   10.334125] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[   10.336096] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   10.336133] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   10.397145] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   10.428008] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   10.428014] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[   10.428108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[   10.428135] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[   10.428145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[   10.428179] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[   10.428198] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[   10.430249] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.430268] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.432023] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.432045] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   10.432075] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   10.432105] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   10.432951] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   10.432978] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   10.435027] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.435046] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.437093] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.437102] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   10.437107] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[   10.437188] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[   10.437207] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[   10.437216] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[   10.437302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[   10.437320] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[   10.437332] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[   10.437351] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[   10.437360] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[   10.438260] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[   10.438279] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[   10.438299] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[   10.438314] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[   10.440034] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   10.440060] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   10.442106] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   10.442119] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   10.442138] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   10.442154] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   10.442981] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   10.442996] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   10.443012] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[   10.443017] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[   10.443060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[   10.443076] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[   10.500840] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   10.532013] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   10.532039] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   10.532058] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   10.564013] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   10.564041] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   10.625761] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   10.634370] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[   10.656015] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   10.656023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[   10.656104] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[   10.656148] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[   10.656157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[   10.656182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[   10.656208] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[   10.658247] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.658265] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.660026] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.660049] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   10.660075] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   10.660098] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   10.660826] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   10.660842] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   10.662878] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.662892] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.664022] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.664034] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   10.664041] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[   10.664090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[   10.664106] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[   10.664113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[   10.728366] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[   10.813004] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[   11.251158] [drm:drm_mode_addfb2 [drm]] [FB:81]
>[   11.251175] [drm:drm_mode_setcrtc [drm]] [CRTC:37:pipe A]
>[   11.251200] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:58:LVDS-1]
>[   11.284505] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe B]
>[   11.284556] [drm:drm_mode_setcrtc [drm]] [CRTC:57:pipe C]
>[   17.303884] wlp3s0: authenticate with 88:d7:f6:a9:44:0c
>[   17.307263] wlp3s0: send auth to 88:d7:f6:a9:44:0c (try 1/3)
>[   17.357591] wlp3s0: authenticated
>[   17.360081] wlp3s0: associate with 88:d7:f6:a9:44:0c (try 1/3)
>[   17.362165] wlp3s0: RX AssocResp from 88:d7:f6:a9:44:0c (capab=0x411 status=0 aid=2)
>[   17.379406] wlp3s0: associated
>[   17.408327] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[   17.458398] wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 88:d7:f6:a9:44:0c
>[   18.060513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[   18.060550] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[   18.060569] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[   18.060595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[   18.060607] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[   18.062627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[   18.062662] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[   18.062696] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[   18.062721] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[   18.064030] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   18.064062] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   18.066131] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   18.066149] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   18.066177] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   18.066204] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   18.067190] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   18.067225] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   18.067250] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[   18.067319] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[   18.067362] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[   18.067387] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[   18.125607] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   18.156020] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   18.156056] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   18.156086] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   18.188022] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   18.188059] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   18.248037] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   18.280073] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   18.280082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[   18.280114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[   18.280140] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[   18.280151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[   18.280162] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[   18.280185] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[   18.282251] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   18.282299] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   18.284047] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   18.284068] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   18.284098] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   18.284127] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   18.286148] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   18.286176] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   18.288285] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   18.288309] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   18.290366] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   18.290380] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   18.290389] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[   18.290429] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[   18.290461] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[   18.290472] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[   18.402025] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1]
>[   18.402061] [drm:intel_lvds_detect [i915]] [CONNECTOR:58:LVDS-1]
>[   18.402082] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[   18.402111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:LVDS-1] probed modes :
>[   18.402128] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[   18.402506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1]
>[   18.402540] [drm:intel_crt_detect [i915]] [CONNECTOR:64:VGA-1] force=1
>[   18.402576] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
>[   18.402602] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
>[   18.404237] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   18.404267] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   18.406339] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   18.406361] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   18.406394] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   18.406423] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   18.407565] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
>[   18.407599] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   18.407628] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
>[   18.407638] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:VGA-1] disconnected
>[   18.407673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1]
>[   18.407701] [drm:intel_hdmi_detect [i915]] [CONNECTOR:67:HDMI-A-1]
>[   18.464294] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   18.496101] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   18.496135] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   18.496162] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   18.528033] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   18.528075] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   18.588027] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   18.620032] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   18.620043] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:HDMI-A-1] disconnected
>[   18.620079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]
>[   18.620114] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]
>[   18.620128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected
>[   18.620142] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2]
>[   18.620175] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-2]
>[   18.621976] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   18.622005] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   18.624158] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   18.624179] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   18.624208] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   18.624234] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   18.625494] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   18.625524] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   18.627587] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   18.627613] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   18.629674] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   18.629688] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   18.629696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-2] disconnected
>[   18.629733] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2]
>[   18.629763] [drm:intel_dp_detect [i915]] [CONNECTOR:76:DP-2]
>[   18.629776] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:DP-2] disconnected
>[  969.801788] [drm:asle_work [i915]] bclp = 0x8000001c
>[  969.801915] [drm:asle_work [i915]] updating opregion backlight 28/255
>[  969.801946] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 487
>[  969.801975] [drm:asle_work [i915]] PWM freq is not supported
>[  969.938630] [drm:asle_work [i915]] bclp = 0x80000017
>[  969.938717] [drm:asle_work [i915]] updating opregion backlight 23/255
>[  969.938737] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 400
>[  969.938755] [drm:asle_work [i915]] PWM freq is not supported
>[  970.108840] [drm:asle_work [i915]] bclp = 0x80000013
>[  970.108897] [drm:asle_work [i915]] updating opregion backlight 19/255
>[  970.109057] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 331
>[  970.109118] [drm:asle_work [i915]] PWM freq is not supported
>[  970.271798] [drm:asle_work [i915]] bclp = 0x8000000f
>[  970.271829] [drm:asle_work [i915]] updating opregion backlight 15/255
>[  970.271920] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 261
>[  970.271949] [drm:asle_work [i915]] PWM freq is not supported
>[  970.436355] [drm:asle_work [i915]] bclp = 0x8000000c
>[  970.436452] [drm:asle_work [i915]] updating opregion backlight 12/255
>[  970.436476] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 209
>[  970.436500] [drm:asle_work [i915]] PWM freq is not supported
>[  970.600826] [drm:asle_work [i915]] bclp = 0x80000009
>[  970.600854] [drm:asle_work [i915]] updating opregion backlight 9/255
>[  970.600879] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 157
>[  970.600907] [drm:asle_work [i915]] PWM freq is not supported
>[  970.757525] [drm:asle_work [i915]] bclp = 0x80000006
>[  970.757617] [drm:asle_work [i915]] updating opregion backlight 6/255
>[  970.757640] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[  970.757664] [drm:asle_work [i915]] PWM freq is not supported
>[  970.926457] [drm:asle_work [i915]] bclp = 0x80000003
>[  970.926477] [drm:asle_work [i915]] updating opregion backlight 3/255
>[  970.926496] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 52
>[  970.926514] [drm:asle_work [i915]] PWM freq is not supported
>[  974.945033] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[  974.945127] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[  974.945238] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[  974.945351] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[  974.945450] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[  974.945571] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[  974.945690] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[  974.945814] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[  974.945941] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[  974.946063] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  974.946179] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  974.946249] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 75200 1366 1414 1478 1582 768 772 779 792 0x0 0x9
>[  974.946365] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  974.946433] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[  974.946551] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[  974.946748] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[  974.946862] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  974.946984] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  974.947097] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x10c07
>[  974.947226] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  974.947341] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:81, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[  974.947471] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[  974.947595] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] FB:82, fb = 256x256 format = AR24 little-endian (0x34325241)
>[  974.947717] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[  974.947821] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[  974.947876] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[  974.948039] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[  974.948108] [drm:intel_disable_pipe [i915]] disabling pipe A
>[  975.195689] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 37
>[  975.195796] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A
>[  975.196107] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[  975.196162] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[  975.196208] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[  975.196248] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[  975.196289] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[  975.196328] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[  975.196372] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[  975.196423] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[  975.196485] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[  975.196540] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[  975.196589] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[  975.196636] [drm:intel_power_well_disable [i915]] disabling always-on
>[  975.780866] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[  975.780936] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[  975.781005] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[  975.781050] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[  975.781091] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[  975.781146] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[  975.781201] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[  975.781253] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[  975.781312] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[  975.781366] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  975.781418] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  975.781452] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 75200 1366 1414 1478 1582 768 772 779 792 0x0 0x9
>[  975.781487] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  975.781510] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[  975.781547] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[  975.781580] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[  975.781613] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  975.781645] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  975.781687] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x10c07
>[  975.781719] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  975.781755] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:81, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[  975.781788] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[  975.781822] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] FB:82, fb = 256x256 format = AR24 little-endian (0x34325241)
>[  975.781865] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[  975.781924] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[  975.781961] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[  975.782039] [drm:intel_power_well_enable [i915]] enabling always-on
>[  975.782084] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[  975.782119] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[  975.782153] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[  975.782186] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[  975.782218] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[  975.782249] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[  975.782284] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[  975.782324] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[  975.782375] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A
>[  975.783007] [drm:intel_enable_pipe [i915]] enabling pipe A
>[  975.783232] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR before link train 0x0
>[  975.783300] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x100
>[  975.783355] [drm:ivb_manual_fdi_link_train [i915]] FDI train 1 done, level 0.
>[  975.783431] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x600
>[  975.783487] [drm:ivb_manual_fdi_link_train [i915]] FDI train 2 done, level 0.
>[  975.783534] [drm:ivb_manual_fdi_link_train [i915]] FDI train done.
>[  975.783603] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 37
>[  975.783656] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A
>[  975.786620] [drm:intel_panel_enable_backlight [i915]] pipe A
>[  975.786697] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 4437
>[  975.818662] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[  975.818732] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[  975.818805] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[  989.466810] [drm:asle_work [i915]] bclp = 0x80000006
>[  989.466836] [drm:asle_work [i915]] updating opregion backlight 6/255
>[  989.466855] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[  989.466872] [drm:asle_work [i915]] PWM freq is not supported
>[ 1001.040306] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[ 1001.040374] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[ 1001.040479] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[ 1001.040623] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[ 1001.040727] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[ 1001.040841] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[ 1001.040962] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[ 1001.041041] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[ 1001.041106] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[ 1001.041163] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[ 1001.041217] [drm:intel_dump_pipe_config [i915]] requested mode:
>[ 1001.041262] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 75200 1366 1414 1478 1582 768 772 779 792 0x0 0x9
>[ 1001.041324] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[ 1001.041395] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[ 1001.041518] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[ 1001.041571] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[ 1001.041609] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[ 1001.041642] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[ 1001.041686] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x10c07
>[ 1001.041719] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[ 1001.041756] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:81, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[ 1001.041790] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[ 1001.041824] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] FB:82, fb = 256x256 format = AR24 little-endian (0x34325241)
>[ 1001.041874] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[ 1001.041934] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[ 1001.041971] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[ 1001.042087] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[ 1001.042135] [drm:intel_disable_pipe [i915]] disabling pipe A
>[ 1001.292667] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 37
>[ 1001.292722] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A
>[ 1001.292984] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[ 1001.293021] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[ 1001.293056] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[ 1001.293089] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[ 1001.293121] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[ 1001.293153] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[ 1001.293191] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1001.293232] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[ 1001.293280] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[ 1001.293321] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[ 1001.293361] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1001.293404] [drm:intel_power_well_disable [i915]] disabling always-on
>[ 1001.293636] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[ 1001.293686] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[ 1001.293754] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[ 1001.293812] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[ 1001.293860] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[ 1001.293906] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[ 1001.293958] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[ 1001.294011] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[ 1001.294063] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[ 1001.294117] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[ 1001.294167] [drm:intel_dump_pipe_config [i915]] requested mode:
>[ 1001.294210] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 75200 1366 1414 1478 1582 768 772 779 792 0x0 0x9
>[ 1001.294295] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[ 1001.294339] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[ 1001.294397] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[ 1001.294454] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[ 1001.294509] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[ 1001.294565] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[ 1001.294634] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x10c07
>[ 1001.294698] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[ 1001.294754] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:81, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[ 1001.294816] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[ 1001.294875] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] FB:82, fb = 256x256 format = AR24 little-endian (0x34325241)
>[ 1001.294946] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[ 1001.295043] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[ 1001.295097] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[ 1001.295187] [drm:intel_power_well_enable [i915]] enabling always-on
>[ 1001.295249] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[ 1001.295308] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[ 1001.295361] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[ 1001.295410] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[ 1001.295464] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[ 1001.295515] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[ 1001.295565] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1001.295628] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[ 1001.295697] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A
>[ 1001.296337] [drm:intel_enable_pipe [i915]] enabling pipe A
>[ 1001.296562] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR before link train 0x0
>[ 1001.296623] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x100
>[ 1001.296683] [drm:ivb_manual_fdi_link_train [i915]] FDI train 1 done, level 0.
>[ 1001.296741] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x600
>[ 1001.296799] [drm:ivb_manual_fdi_link_train [i915]] FDI train 2 done, level 0.
>[ 1001.296847] [drm:ivb_manual_fdi_link_train [i915]] FDI train done.
>[ 1001.296909] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 37
>[ 1001.296970] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A
>[ 1001.850954] [drm:intel_panel_enable_backlight [i915]] pipe A
>[ 1001.851017] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[ 1001.882787] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[ 1001.882857] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[ 1001.882933] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1004.640489] [drm:asle_work [i915]] bclp = 0x80000003
>[ 1004.640515] [drm:asle_work [i915]] updating opregion backlight 3/255
>[ 1004.640542] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 52
>[ 1004.640567] [drm:asle_work [i915]] PWM freq is not supported
>[ 1006.489785] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[ 1006.489854] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[ 1006.489923] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[ 1006.489976] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[ 1006.490013] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[ 1006.490054] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[ 1006.490097] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[ 1006.490150] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[ 1006.490228] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[ 1006.490276] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[ 1006.490321] [drm:intel_dump_pipe_config [i915]] requested mode:
>[ 1006.490363] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 75200 1366 1414 1478 1582 768 772 779 792 0x0 0x9
>[ 1006.490413] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[ 1006.490446] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[ 1006.490511] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[ 1006.490572] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[ 1006.490634] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[ 1006.490675] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[ 1006.490724] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x10c07
>[ 1006.490762] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[ 1006.490804] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:81, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[ 1006.490843] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[ 1006.490902] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] FB:82, fb = 256x256 format = AR24 little-endian (0x34325241)
>[ 1006.490973] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[ 1006.491074] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[ 1006.491134] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[ 1006.491272] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[ 1006.491323] [drm:intel_disable_pipe [i915]] disabling pipe A
>[ 1006.740597] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 37
>[ 1006.740661] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A
>[ 1006.740932] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[ 1006.740979] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[ 1006.741022] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[ 1006.741062] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[ 1006.741103] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[ 1006.741142] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[ 1006.741186] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1006.741234] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[ 1006.741289] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[ 1006.741342] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[ 1006.741390] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1006.741441] [drm:intel_power_well_disable [i915]] disabling always-on
>[ 1006.741770] [drm:intel_atomic_check.part.135 [i915]] [CONNECTOR:58:LVDS-1] checking for sink bpp constrains
>[ 1006.741841] [drm:intel_atomic_check.part.135 [i915]] clamping display bpp (was 36) to default limit of 24
>[ 1006.741939] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
>[ 1006.742043] [drm:intel_atomic_check.part.135 [i915]] checking fdi config on pipe A, lanes 1
>[ 1006.742149] [drm:intel_atomic_check.part.135 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[ 1006.742322] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
>[ 1006.742416] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
>[ 1006.742504] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[ 1006.742607] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2628430, gmch_n: 4194304, link_m: 146023, link_n: 524288, tu: 64
>[ 1006.742700] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[ 1006.742787] [drm:intel_dump_pipe_config [i915]] requested mode:
>[ 1006.742851] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 75200 1366 1414 1478 1582 768 772 779 792 0x0 0x9
>[ 1006.742940] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[ 1006.743003] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
>[ 1006.743084] [drm:intel_dump_pipe_config [i915]] crtc timings: 75200 1366 1414 1478 1582 768 772 779 792, type: 0x48 flags: 0x9
>[ 1006.743151] [drm:intel_dump_pipe_config [i915]] port clock: 75200, pipe src size: 1366x768, pixel rate 75200
>[ 1006.743199] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[ 1006.743253] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[ 1006.743320] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c07, fp1: 0x10c07
>[ 1006.743369] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[ 1006.743431] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:81, fb = 1366x768 format = XR24 little-endian (0x34325258)
>[ 1006.743483] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
>[ 1006.743539] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] FB:82, fb = 256x256 format = AR24 little-endian (0x34325241)
>[ 1006.743609] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
>[ 1006.743702] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
>[ 1006.743759] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
>[ 1006.743848] [drm:intel_power_well_enable [i915]] enabling always-on
>[ 1006.743918] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:LVDS]
>[ 1006.743974] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:CRT]
>[ 1006.744031] [drm:intel_atomic_commit_tail [i915]] [ENCODER:66:HDMI B]
>[ 1006.744079] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP B]
>[ 1006.744114] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:HDMI C]
>[ 1006.744146] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:DP C]
>[ 1006.744182] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1006.744225] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL B
>[ 1006.744277] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A
>[ 1006.744886] [drm:intel_enable_pipe [i915]] enabling pipe A
>[ 1006.745085] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR before link train 0x0
>[ 1006.745130] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x100
>[ 1006.745165] [drm:ivb_manual_fdi_link_train [i915]] FDI train 1 done, level 0.
>[ 1006.745206] [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x600
>[ 1006.745241] [drm:ivb_manual_fdi_link_train [i915]] FDI train 2 done, level 0.
>[ 1006.745272] [drm:ivb_manual_fdi_link_train [i915]] FDI train done.
>[ 1006.745317] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 37
>[ 1006.745353] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A
>[ 1007.247824] [drm:intel_panel_enable_backlight [i915]] pipe A
>[ 1007.247890] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 4437
>[ 1007.281085] [drm:verify_connector_state.isra.115 [i915]] [CONNECTOR:58:LVDS-1]
>[ 1007.281156] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
>[ 1007.281230] [drm:verify_single_dpll_state.isra.74 [i915]] PCH DPLL A
>[ 1027.587091] [drm:asle_work [i915]] bclp = 0x80000006
>[ 1027.587115] [drm:asle_work [i915]] updating opregion backlight 6/255
>[ 1027.587138] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[ 1027.587165] [drm:asle_work [i915]] PWM freq is not supported
>[ 1031.308964] [drm:asle_work [i915]] bclp = 0x80000003
>[ 1031.308984] [drm:asle_work [i915]] updating opregion backlight 3/255
>[ 1031.309004] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 52
>[ 1031.309021] [drm:asle_work [i915]] PWM freq is not supported
>[ 1032.831830] [drm:asle_work [i915]] bclp = 0x80000006
>[ 1032.831851] [drm:asle_work [i915]] updating opregion backlight 6/255
>[ 1032.831870] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 104
>[ 1032.831889] [drm:asle_work [i915]] PWM freq is not supported
>[ 1033.015493] [drm:asle_work [i915]] bclp = 0x80000009
>[ 1033.015524] [drm:asle_work [i915]] updating opregion backlight 9/255
>[ 1033.015619] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 157
>[ 1033.015648] [drm:asle_work [i915]] PWM freq is not supported
>[ 1033.170133] [drm:asle_work [i915]] bclp = 0x8000000c
>[ 1033.170255] [drm:asle_work [i915]] updating opregion backlight 12/255
>[ 1033.170298] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 209
>[ 1033.170328] [drm:asle_work [i915]] PWM freq is not supported
>[ 1033.324507] [drm:asle_work [i915]] bclp = 0x8000000f
>[ 1033.324611] [drm:asle_work [i915]] updating opregion backlight 15/255
>[ 1033.324639] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 261
>[ 1033.324668] [drm:asle_work [i915]] PWM freq is not supported
>[ 1033.479932] [drm:asle_work [i915]] bclp = 0x80000013
>[ 1033.480029] [drm:asle_work [i915]] updating opregion backlight 19/255
>[ 1033.480053] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 331
>[ 1033.480075] [drm:asle_work [i915]] PWM freq is not supported
>[ 1033.610383] [drm:asle_work [i915]] bclp = 0x80000017
>[ 1033.610406] [drm:asle_work [i915]] updating opregion backlight 23/255
>[ 1033.610502] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 400
>[ 1033.610523] [drm:asle_work [i915]] PWM freq is not supported
>[ 1033.755247] [drm:asle_work [i915]] bclp = 0x8000001c
>[ 1033.755340] [drm:asle_work [i915]] updating opregion backlight 28/255
>[ 1033.755364] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 487
>[ 1033.755385] [drm:asle_work [i915]] PWM freq is not supported
>[ 1034.086373] [drm:asle_work [i915]] bclp = 0x80000021
>[ 1034.086460] [drm:asle_work [i915]] updating opregion backlight 33/255
>[ 1034.086480] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 574
>[ 1034.086501] [drm:asle_work [i915]] PWM freq is not supported
>[ 1034.263538] [drm:asle_work [i915]] bclp = 0x80000028
>[ 1034.263568] [drm:asle_work [i915]] updating opregion backlight 40/255
>[ 1034.263593] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 696
>[ 1034.263621] [drm:asle_work [i915]] PWM freq is not supported
>[ 1034.415311] [drm:asle_work [i915]] bclp = 0x80000032
>[ 1034.415401] [drm:asle_work [i915]] updating opregion backlight 50/255
>[ 1034.415422] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 870
>[ 1034.415442] [drm:asle_work [i915]] PWM freq is not supported
>[ 1034.594637] [drm:asle_work [i915]] bclp = 0x80000041
>[ 1034.594760] [drm:asle_work [i915]] updating opregion backlight 65/255
>[ 1034.594794] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1131
>[ 1034.594833] [drm:asle_work [i915]] PWM freq is not supported
>[ 1034.735989] [drm:asle_work [i915]] bclp = 0x80000058
>[ 1034.736033] [drm:asle_work [i915]] updating opregion backlight 88/255
>[ 1034.736168] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1531
>[ 1034.736210] [drm:asle_work [i915]] PWM freq is not supported
>[ 1034.906426] [drm:asle_work [i915]] bclp = 0x8000007d
>[ 1034.906452] [drm:asle_work [i915]] updating opregion backlight 125/255
>[ 1034.906481] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 2175
>[ 1034.906515] [drm:asle_work [i915]] PWM freq is not supported

Actions: View

Attachments on bug 108703: 142454

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.