Attachment 142667 Details for Bug 108225 – dmesg S4 resume

dmesg S4 resume

dmesg.log (text/x-log), 167.14 KB, created by Tolga Cakir on 2018-11-30 15:10:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tolga Cakir

Created: 2018-11-30 15:10:38 UTC

Size: 167.14 KB

patch

obsolete

>[    0.000000] Linux version 4.20.0-rc3-b4bf44d2dcbd (tolga@lightning) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Fri Nov 30 00:48:25 CET 2018
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-drm-intel-next-git root=UUID=f774e213-7642-4778-9b5e-ed1584b730d0 rw quiet drm.debug=0x1e resume=UUID=f774e213-7642-4778-9b5e-ed1584b730d0 resume_offset=1310720
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c64aefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c64af000-0x00000000c64b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000c64b6000-0x00000000c68fafff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c68fb000-0x00000000c6f16fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000c6f17000-0x00000000ca7fffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ca800000-0x00000000cab51fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000cab52000-0x00000000cab72fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000cab73000-0x00000000cb547fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cb548000-0x00000000cbf6cfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000cbf6d000-0x00000000cbffefff] type 20
>[    0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.31 by American Megatrends
>[    0.000000] efi:  ACPI 2.0=0xcab58000  ACPI=0xcab58000  SMBIOS=0xf0000 
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Dell Inc. Dell Precision M3800/Dell Precision M3800, BIOS A11 02/13/2018
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2194.928 MHz processor
>[    0.000069] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000071] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000077] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
>[    0.000080] MTRR default type: uncachable
>[    0.000081] MTRR fixed ranges enabled:
>[    0.000082]   00000-9FFFF write-back
>[    0.000082]   A0000-DFFFF uncachable
>[    0.000083]   E0000-FFFFF write-protect
>[    0.000083] MTRR variable ranges enabled:
>[    0.000084]   0 base 0000000000 mask 7E00000000 write-back
>[    0.000085]   1 base 0200000000 mask 7FE0000000 write-back
>[    0.000086]   2 base 0220000000 mask 7FF0000000 write-back
>[    0.000086]   3 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000087]   4 base 00D0000000 mask 7FF0000000 uncachable
>[    0.000088]   5 base 00CE000000 mask 7FFE000000 uncachable
>[    0.000088]   6 base 00CD000000 mask 7FFF000000 uncachable
>[    0.000089]   7 base 022FE00000 mask 7FFFE00000 uncachable
>[    0.000089]   8 disabled
>[    0.000089]   9 disabled
>[    0.001136] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.001253] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
>[    0.001257] last_pfn = 0xcc000 max_arch_pfn = 0x400000000
>[    0.008344] check: Scanning 1 areas for low memory corruption
>[    0.008347] Base memory trampoline at [(____ptrval____)] 98000 size 24576
>[    0.008350] Using GB pages for direct mapping
>[    0.008352] BRK [0x11a01000, 0x11a01fff] PGTABLE
>[    0.008353] BRK [0x11a02000, 0x11a02fff] PGTABLE
>[    0.008354] BRK [0x11a03000, 0x11a03fff] PGTABLE
>[    0.008381] BRK [0x11a04000, 0x11a04fff] PGTABLE
>[    0.008383] BRK [0x11a05000, 0x11a05fff] PGTABLE
>[    0.008657] BRK [0x11a06000, 0x11a06fff] PGTABLE
>[    0.008710] BRK [0x11a07000, 0x11a07fff] PGTABLE
>[    0.008784] BRK [0x11a08000, 0x11a08fff] PGTABLE
>[    0.008831] Secure boot could not be determined
>[    0.008832] RAMDISK: [mem 0x370c3000-0x37858fff]
>[    0.008837] ACPI: Early table checksum verification disabled
>[    0.008839] ACPI: RSDP 0x00000000CAB58000 000024 (v02 DELL  )
>[    0.008842] ACPI: XSDT 0x00000000CAB580A8 0000CC (v01 DELL   CL09     01072009 AMI  00010013)
>[    0.008846] ACPI: FACP 0x00000000CAB65F30 00010C (v05 DELL   CL09     01072009 AMI  00010013)
>[    0.008850] ACPI: DSDT 0x00000000CAB58200 00DD30 (v02 DELL   CL09     00000000 INTL 20120711)
>[    0.008852] ACPI: FACS 0x00000000CB530080 000040
>[    0.008854] ACPI: APIC 0x00000000CAB66040 000092 (v03 DELL   CL09     01072009 AMI  00010013)
>[    0.008856] ACPI: FPDT 0x00000000CAB660D8 000044 (v01 DELL   CL09     01072009 AMI  00010013)
>[    0.008858] ACPI: SSDT 0x00000000CAB66120 000C9A (v01 TrmRef PtidDevc 00001000 INTL 20091112)
>[    0.008860] ACPI: SSDT 0x00000000CAB66DC0 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
>[    0.008863] ACPI: SLIC 0x00000000CAB66FE8 000176 (v01 DELL   CL09     01072009 AMI  00010013)
>[    0.008865] ACPI: SSDT 0x00000000CAB67160 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
>[    0.008867] ACPI: SSDT 0x00000000CAB676A0 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
>[    0.008869] ACPI: SSDT 0x00000000CAB68178 0002DE (v01 PmRef  Cpu0Tst  00003000 INTL 20120711)
>[    0.008871] ACPI: SSDT 0x00000000CAB68458 000348 (v01 PmRef  ApTst    00003000 INTL 20120711)
>[    0.008873] ACPI: MCFG 0x00000000CAB687A0 00003C (v01 DELL   CL09     01072009 MSFT 00000097)
>[    0.008875] ACPI: SSDT 0x00000000CAB687E0 004F7F (v01 DptfTa DptfTabl 00001000 INTL 20120711)
>[    0.008877] ACPI: HPET 0x00000000CAB6D760 000038 (v01 DELL   CL09     01072009 AMI. 00000005)
>[    0.008879] ACPI: SSDT 0x00000000CAB6D798 0003AA (v01 SataRe SataTabl 00001000 INTL 20120711)
>[    0.008881] ACPI: SSDT 0x00000000CAB6DB48 002B6D (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
>[    0.008883] ACPI: SSDT 0x00000000CAB706B8 000DA0 (v01 SgRef  SgPeg    00001000 INTL 20120711)
>[    0.008885] ACPI: SSDT 0x00000000CAB71458 00058D (v01 AMITCG PROC     00000001 INTL 20120711)
>[    0.008887] ACPI: BGRT 0x00000000CAB719E8 000038 (v00 DELL   CL09     01072009 AMI  00010013)
>[    0.008889] ACPI: DMAR 0x00000000CAB71A20 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
>[    0.008891] ACPI: SSDT 0x00000000CAB71AD8 00123B (v01 OptRef OptTabl  00001000 INTL 20120711)
>[    0.008893] ACPI: TCPA 0x00000000CAB72D18 000032 (v02 APTIO4 NAPAASF  00000001 MSFT 01000013)
>[    0.008900] ACPI: Local APIC address 0xfee00000
>[    0.008970] No NUMA configuration found
>[    0.008970] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
>[    0.008974] NODE_DATA(0) allocated [mem 0x22fdfa000-0x22fdfdfff]
>[    0.008991] Zone ranges:
>[    0.008992]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.008993]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.008993]   Normal   [mem 0x0000000100000000-0x000000022fdfffff]
>[    0.008994]   Device   empty
>[    0.008995] Movable zone start for each node
>[    0.008995] Early memory node ranges
>[    0.008996]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.008996]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
>[    0.008997]   node   0: [mem 0x0000000000100000-0x00000000c64aefff]
>[    0.008997]   node   0: [mem 0x00000000c64b6000-0x00000000c68fafff]
>[    0.008998]   node   0: [mem 0x00000000c6f17000-0x00000000ca7fffff]
>[    0.008998]   node   0: [mem 0x00000000cbfff000-0x00000000cbffffff]
>[    0.008999]   node   0: [mem 0x0000000100000000-0x000000022fdfffff]
>[    0.009298] Zeroed struct page in unavailable ranges: 24198 pages
>[    0.009299] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
>[    0.009300] On node 0 totalpages: 2072442
>[    0.009300]   DMA zone: 64 pages used for memmap
>[    0.009301]   DMA zone: 23 pages reserved
>[    0.009302]   DMA zone: 3996 pages, LIFO batch:0
>[    0.009378]   DMA32 zone: 12872 pages used for memmap
>[    0.009379]   DMA32 zone: 823774 pages, LIFO batch:63
>[    0.025388]   Normal zone: 19448 pages used for memmap
>[    0.025389]   Normal zone: 1244672 pages, LIFO batch:63
>[    0.047911] Reserving Intel graphics memory at [mem 0xcd200000-0xcf1fffff]
>[    0.047985] ACPI: PM-Timer IO Port: 0x1808
>[    0.047986] ACPI: Local APIC address 0xfee00000
>[    0.047992] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.048001] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>[    0.048003] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.048004] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.048005] ACPI: IRQ0 used by override.
>[    0.048006] ACPI: IRQ9 used by override.
>[    0.048007] Using ACPI (MADT) for SMP configuration information
>[    0.048008] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.048019] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.048040] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.048041] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.048043] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.048043] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.048044] PM: Registered nosave memory: [mem 0xc64af000-0xc64b5fff]
>[    0.048046] PM: Registered nosave memory: [mem 0xc68fb000-0xc6f16fff]
>[    0.048047] PM: Registered nosave memory: [mem 0xca800000-0xcab51fff]
>[    0.048047] PM: Registered nosave memory: [mem 0xcab52000-0xcab72fff]
>[    0.048048] PM: Registered nosave memory: [mem 0xcab73000-0xcb547fff]
>[    0.048048] PM: Registered nosave memory: [mem 0xcb548000-0xcbf6cfff]
>[    0.048049] PM: Registered nosave memory: [mem 0xcbf6d000-0xcbffefff]
>[    0.048050] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
>[    0.048051] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
>[    0.048051] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
>[    0.048051] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.048052] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.048052] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.048053] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
>[    0.048053] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
>[    0.048053] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
>[    0.048054] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.048054] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.048055] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.048055] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>[    0.048055] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.048057] [mem 0xcf200000-0xf7ffffff] available for PCI devices
>[    0.048058] Booting paravirtualized kernel on bare hardware
>[    0.048060] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>[    0.128755] random: get_random_bytes called from start_kernel+0x95/0x51c with crng_init=0
>[    0.128761] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.129023] percpu: Embedded 43 pages/cpu @(____ptrval____) s139264 r8192 d28672 u262144
>[    0.129029] pcpu-alloc: s139264 r8192 d28672 u262144 alloc=1*2097152
>[    0.129029] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.129046] Built 1 zonelists, mobility grouping on.  Total pages: 2040035
>[    0.129046] Policy zone: Normal
>[    0.129048] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-drm-intel-next-git root=UUID=f774e213-7642-4778-9b5e-ed1584b730d0 rw quiet drm.debug=0x1e resume=UUID=f774e213-7642-4778-9b5e-ed1584b730d0 resume_offset=1310720
>[    0.134926] Calgary: detecting Calgary via BIOS EBDA area
>[    0.134927] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.163629] Memory: 8013276K/8289768K available (10245K kernel code, 1151K rwdata, 3064K rodata, 1520K init, 4484K bss, 276492K reserved, 0K cma-reserved)
>[    0.163738] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.163743] Kernel/User page tables isolation: enabled
>[    0.163758] ftrace: allocating 31779 entries in 125 pages
>[    0.174533] rcu: Preemptible hierarchical RCU implementation.
>[    0.174534] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.174535] 	Tasks RCU enabled.
>[    0.174535] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
>[    0.174536] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.176563] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
>[    0.176725] Console: colour dummy device 80x25
>[    0.176729] printk: console [tty0] enabled
>[    0.176742] ACPI: Core revision 20181003
>[    0.176960] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.176969] hpet clockevent registered
>[    0.176973] APIC: Switch to symmetric I/O mode setup
>[    0.176974] DMAR: Host address width 39
>[    0.176975] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.176978] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
>[    0.176979] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.176982] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
>[    0.176982] DMAR: RMRR base: 0x000000cbe8f000 end: 0x000000cbe9dfff
>[    0.176983] DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
>[    0.176984] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
>[    0.176985] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>[    0.176986] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
>[    0.177476] DMAR-IR: Enabled IRQ remapping in x2apic mode
>[    0.177477] x2apic enabled
>[    0.177483] Switched APIC routing to cluster x2apic.
>[    0.177865] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.193640] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa37b89f78, max_idle_ns: 440795224308 ns
>[    0.193650] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.76 BogoMIPS (lpj=7316426)
>[    0.193652] pid_max: default: 32768 minimum: 301
>[    0.194198] LSM: Security Framework initializing
>[    0.194199] Yama: becoming mindful.
>[    0.195683] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.196466] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.196501] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.196527] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.196710] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.196710] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.196714] mce: CPU supports 9 MCE banks
>[    0.196722] CPU0: Thermal monitoring enabled (TM1)
>[    0.196734] process: using mwait in idle threads
>[    0.196736] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.196737] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.196738] Spectre V2 : Mitigation: Full generic retpoline
>[    0.196739] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>[    0.196739] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.196739] Spectre V2 : Enabling Restricted Speculation for firmware calls
>[    0.196740] Spectre V2 : Spectre v2 cross-process SMT mitigation: Enabling STIBP
>[    0.196741] Speculative Store Bypass: Vulnerable
>[    0.196881] Freeing SMP alternatives memory: 28K
>[    0.201203] TSC deadline timer enabled
>[    0.201206] smpboot: CPU0: Intel(R) Core(TM) i7-4702HQ CPU @ 2.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
>[    0.220327] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.220367] ... version:                3
>[    0.220368] ... bit width:              48
>[    0.220368] ... generic registers:      4
>[    0.220369] ... value mask:             0000ffffffffffff
>[    0.220369] ... max period:             00007fffffffffff
>[    0.220370] ... fixed-purpose events:   3
>[    0.220370] ... event mask:             000000070000000f
>[    0.226991] rcu: Hierarchical SRCU implementation.
>[    0.233956] random: crng done (trusting CPU's manufacturer)
>[    0.243790] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.250326] smp: Bringing up secondary CPUs ...
>[    0.283664] x86: Booting SMP configuration:
>[    0.283665] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.483973] smp: Brought up 1 node, 8 CPUs
>[    0.483973] smpboot: Max logical packages: 1
>[    0.483973] smpboot: Total of 8 processors activated (35132.13 BogoMIPS)
>[    0.487223] devtmpfs: initialized
>[    0.487223] x86/mm: Memory block size: 128MB
>[    0.487502] PM: Registering ACPI NVS region [mem 0xc64af000-0xc64b5fff] (28672 bytes)
>[    0.487502] PM: Registering ACPI NVS region [mem 0xcab73000-0xcb547fff] (10309632 bytes)
>[    0.487502] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>[    0.487502] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.487502] pinctrl core: initialized pinctrl subsystem
>[    0.487502] regulator-dummy: no parameters
>
>[    0.487502] *************************************************************
>[    0.487502] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **
>[    0.487502] **                                                         **
>[    0.487502] **  IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL  **
>[    0.487502] **                                                         **
>[    0.487502] ** This means that this kernel is built to expose internal **
>[    0.487502] ** IOMMU data structures, which may compromise security on **
>[    0.487502] ** your system.                                            **
>[    0.487502] **                                                         **
>[    0.487502] ** If you see this message and you are not debugging the   **
>[    0.487502] ** kernel, report this immediately to your vendor!         **
>[    0.487502] **                                                         **
>[    0.487502] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **
>[    0.487502] *************************************************************
>[    0.487502] RTC time: 14:48:02, date: 11/30/18
>[    0.487502] NET: Registered protocol family 16
>[    0.487502] cpuidle: using governor ladder
>[    0.487502] cpuidle: using governor menu
>[    0.487502] ACPI: bus type PCI registered
>[    0.487502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.487502] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.487502] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.487502] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
>[    0.487502] PCI: Using configuration type 1 for base access
>[    0.487502] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.487955] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.487955] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.487955] ACPI: Added _OSI(Module Device)
>[    0.487955] ACPI: Added _OSI(Processor Device)
>[    0.487955] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.487955] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.487955] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.487955] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[    0.498939] ACPI: 13 ACPI AML tables successfully acquired and loaded
>[    0.500325] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.503691] ACPI: Dynamic OEM Table Load:
>[    0.503698] ACPI: SSDT 0xFFFFA05625F9E400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.504140] ACPI: Dynamic OEM Table Load:
>[    0.504144] ACPI: SSDT 0xFFFFA05625C1D000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.504531] ACPI: Dynamic OEM Table Load:
>[    0.504534] ACPI: SSDT 0xFFFFA05625F90E00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
>[    0.505831] ACPI: EC: EC started
>[    0.505831] ACPI: EC: interrupt blocked
>[    0.506064] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
>[    0.506066] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.506067] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
>[    0.506068] ACPI: Interpreter enabled
>[    0.506092] ACPI: (supports S0 S3 S4 S5)
>[    0.506093] ACPI: Using IOAPIC for interrupt routing
>[    0.506114] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.506326] ACPI: Enabled 6 GPEs in block 00 to 3F
>[    0.511308] ACPI: Power Resource [NVP3] (on)
>[    0.511326] ACPI: Power Resource [NVP2] (on)
>[    0.512858] ACPI: Power Resource [FN00] (off)
>[    0.512911] ACPI: Power Resource [FN01] (off)
>[    0.513560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.513565] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.514024] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
>[    0.514321] PCI host bridge to bus 0000:00
>[    0.514323] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.514324] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.514325] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.514326] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.514328] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.514329] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.514330] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.514331] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.514332] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.514333] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.514334] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.514335] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
>[    0.514336] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.514343] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
>[    0.514415] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
>[    0.514448] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.514538] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
>[    0.514547] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
>[    0.514552] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.514555] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.514565] pci 0000:00:02.0: BAR 2: assigned to efifb
>[    0.514622] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
>[    0.514629] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
>[    0.514694] pci 0000:00:04.0: [8086:0c03] type 00 class 0x118000
>[    0.514702] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
>[    0.514789] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.514808] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
>[    0.514860] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.514918] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.514937] pci 0000:00:16.0: reg 0x10: [mem 0xf7a26000-0xf7a2600f 64bit]
>[    0.514991] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.515054] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.515074] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a24000-0xf7a243ff]
>[    0.515148] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.515210] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.515228] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
>[    0.515289] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.515347] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.515436] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.515526] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
>[    0.515591] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.515679] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
>[    0.515744] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.515834] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.515854] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
>[    0.515928] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.515993] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
>[    0.516141] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
>[    0.516156] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
>[    0.516163] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
>[    0.516169] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
>[    0.516176] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
>[    0.516183] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.516189] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
>[    0.516220] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.516275] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.516291] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
>[    0.516309] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.516378] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
>[    0.516396] pci 0000:00:1f.6: reg 0x10: [mem 0xf7a20000-0xf7a20fff 64bit]
>[    0.516529] pci 0000:02:00.0: [10de:0ff6] type 00 class 0x030200
>[    0.516551] pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
>[    0.516564] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.516576] pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.516585] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
>[    0.516593] pci 0000:02:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
>[    0.516742] pci 0000:00:01.0: PCI bridge to [bus 02-03]
>[    0.516744] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.516746] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
>[    0.516748] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.516792] pci 0000:00:1c.0: PCI bridge to [bus 04]
>[    0.516891] pci 0000:06:00.0: [8086:08b1] type 00 class 0x028000
>[    0.516963] pci 0000:06:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
>[    0.517195] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>[    0.517281] pci 0000:06:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.2 (capable of 7.876 Gb/s with 8 GT/s x1 link)
>[    0.517401] pci 0000:00:1c.2: PCI bridge to [bus 06]
>[    0.517406] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
>[    0.517505] pci 0000:07:00.0: [10ec:5249] type 00 class 0xff0000
>[    0.517589] pci 0000:07:00.0: reg 0x10: [mem 0xf7800000-0xf7800fff]
>[    0.517904] pci 0000:07:00.0: supports D1 D2
>[    0.517906] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.518116] pci 0000:00:1c.3: PCI bridge to [bus 07]
>[    0.518121] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
>[    0.597412] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597460] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597506] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597550] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597680] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.597723] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.598142] ACPI: EC: interrupt unblocked
>[    0.598158] ACPI: EC: event unblocked
>[    0.598175] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.598176] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
>[    0.598250] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.598250] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.598250] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.598250] vgaarb: loaded
>[    0.598250] pps_core: LinuxPPS API ver. 1 registered
>[    0.598250] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.598250] PTP clock support registered
>[    0.598250] EDAC MC: Ver: 3.0.0
>[    0.598250] Registered efivars operations
>[    0.600429] PCI: Using ACPI for IRQ routing
>[    0.601642] PCI: pci_cache_line_size set to 64 bytes
>[    0.601724] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.601725] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.601726] e820: reserve RAM buffer [mem 0xc64af000-0xc7ffffff]
>[    0.601727] e820: reserve RAM buffer [mem 0xc68fb000-0xc7ffffff]
>[    0.601728] e820: reserve RAM buffer [mem 0xca800000-0xcbffffff]
>[    0.601730] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
>[    0.601817] NetLabel: Initializing
>[    0.601818] NetLabel:  domain hash size = 128
>[    0.601818] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.601831] NetLabel:  unlabeled traffic allowed by default
>[    0.601835] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.601835] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.604729] clocksource: Switched to clocksource tsc-early
>[    0.611595] VFS: Disk quotas dquot_6.6.0
>[    0.611607] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.611656] pnp: PnP ACPI init
>[    0.611949] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.611951] system 00:00: [io  0xffff] has been reserved
>[    0.611953] system 00:00: [io  0xffff] has been reserved
>[    0.611955] system 00:00: [io  0xffff] has been reserved
>[    0.611956] system 00:00: [io  0x1c00-0x1cfe] has been reserved
>[    0.611957] system 00:00: [io  0x1d00-0x1dfe] has been reserved
>[    0.611958] system 00:00: [io  0x1e00-0x1efe] has been reserved
>[    0.611960] system 00:00: [io  0x1f00-0x1ffe] has been reserved
>[    0.611961] system 00:00: [io  0x1800-0x18fe] has been reserved
>[    0.611962] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.611966] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.611984] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.612021] system 00:02: [io  0x1854-0x1857] has been reserved
>[    0.612023] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.612060] system 00:03: [io  0x04d0-0x04d1] has been reserved
>[    0.612063] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.612082] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.612102] pnp 00:05: Plug and Play ACPI device, IDs DLL060d PNP0f13 (active)
>[    0.690622] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.690624] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.690626] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.690627] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.690629] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.690631] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.690633] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    0.690634] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.690636] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
>[    0.690638] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.690640] system 00:06: [mem 0xf7fee000-0xf7feefff] has been reserved
>[    0.690641] system 00:06: [mem 0xf7fd0000-0xf7fdffff] has been reserved
>[    0.690645] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.690984] pnp 00:07: Plug and Play ACPI device, IDs PNP0c31 (active)
>[    0.690985] pnp: PnP ACPI: found 8 devices
>[    0.696657] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.696672] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
>[    0.696674] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
>[    0.696676] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
>[    0.696695] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
>[    0.696701] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
>[    0.696703] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.696705] pci 0000:00:01.0: PCI bridge to [bus 02-03]
>[    0.696707] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.696709] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
>[    0.696711] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.696714] pci 0000:00:1c.0: PCI bridge to [bus 04]
>[    0.696717] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.696721] pci 0000:00:1c.0:   bridge window [mem 0xcf200000-0xcf3fffff]
>[    0.696724] pci 0000:00:1c.0:   bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
>[    0.696729] pci 0000:00:1c.2: PCI bridge to [bus 06]
>[    0.696733] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
>[    0.696740] pci 0000:00:1c.3: PCI bridge to [bus 07]
>[    0.696744] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
>[    0.696752] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.696753] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.696754] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.696755] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.696756] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.696757] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.696758] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.696759] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.696760] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.696761] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.696762] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.696764] pci_bus 0000:00: resource 15 [mem 0xcf200000-0xfeafffff window]
>[    0.696765] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>[    0.696766] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
>[    0.696767] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.696768] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
>[    0.696769] pci_bus 0000:04: resource 1 [mem 0xcf200000-0xcf3fffff]
>[    0.696770] pci_bus 0000:04: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
>[    0.696771] pci_bus 0000:06: resource 1 [mem 0xf7900000-0xf79fffff]
>[    0.696773] pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff]
>[    0.696861] NET: Registered protocol family 2
>[    0.696968] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
>[    0.696998] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.697107] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.697286] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.697314] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.697340] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.697394] NET: Registered protocol family 1
>[    0.697397] NET: Registered protocol family 44
>[    0.697406] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.697821] PCI: CLS 64 bytes, default 64
>[    0.697847] Unpacking initramfs...
>[    0.791622] Freeing initrd memory: 7768K
>[    0.820340] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.820342] software IO TLB: mapped [mem 0xc24af000-0xc64af000] (64MB)
>[    0.820621] check: Scanning for low memory corruption every 60 seconds
>[    0.821216] Initialise system trusted keyrings
>[    0.821226] Key type blacklist registered
>[    0.821260] workingset: timestamp_bits=41 max_order=21 bucket_order=0
>[    0.822409] zbud: loaded
>[    0.846324] Key type asymmetric registered
>[    0.846325] Asymmetric key parser 'x509' registered
>[    0.846332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
>[    0.846359] io scheduler noop registered
>[    0.846360] io scheduler deadline registered
>[    0.846382] io scheduler cfq registered (default)
>[    0.846383] io scheduler mq-deadline registered
>[    0.846383] io scheduler kyber registered
>[    0.846409] io scheduler bfq registered
>[    0.846410] 
>               Start testing find_bit() with random-filled bitmap
>[    0.846417] fbcon: Taking over console
>[    0.847863] find_next_bit:                 1035717 ns, 163630 iterations
>[    0.848875] find_next_zero_bit:            1009821 ns, 164051 iterations
>[    0.849812] find_last_bit:                  934205 ns, 163630 iterations
>[    0.852289] find_first_bit:                2474817 ns,  16376 iterations
>[    0.852791] find_next_and_bit:		1097888 cycles, 73527 iterations
>[    0.852793] 
>               Start testing find_bit() with sparse bitmap
>[    0.852823] find_next_bit:                   10928 ns,    655 iterations
>[    0.854792] find_next_zero_bit:            1966910 ns, 327026 iterations
>[    0.854805] find_last_bit:                   10684 ns,    655 iterations
>[    0.855699] find_first_bit:                 892140 ns,    655 iterations
>[    0.855705] find_next_and_bit:		8733 cycles, 1 iterations
>[    0.855959] pcieport 0000:00:01.0: Signaling PME with IRQ 26
>[    0.856080] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
>[    0.856097] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    0.856253] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
>[    0.856377] pcieport 0000:00:1c.3: Signaling PME with IRQ 29
>[    0.856421] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    0.856436] efifb: probing for efifb
>[    0.856455] efifb: showing boot graphics
>[    0.857399] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k
>[    0.857400] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    0.857401] efifb: scrolling: redraw
>[    0.857402] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.857468] Console: switching to colour frame buffer device 240x67
>[    0.861245] fb0: EFI VGA frame buffer device
>[    0.861252] intel_idle: MWAIT substates: 0x42120
>[    0.861253] intel_idle: v0.4.1 model 0x3C
>[    0.861499] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.863419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.864363] rtc_cmos 00:01: RTC can wake from S4
>[    0.864503] rtc_cmos 00:01: registered as rtc0
>[    0.864514] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.864522] intel_pstate: Intel P-state driver initializing
>[    0.865015] ledtrig-cpu: registered to indicate activity on CPUs
>[    0.865581] NET: Registered protocol family 10
>[    0.878885] Segment Routing with IPv6
>[    0.878917] NET: Registered protocol family 17
>[    0.879876] RAS: Correctable Errors collector initialized.
>[    0.879914] microcode: sig=0x306c3, pf=0x20, revision=0x24
>[    0.880116] microcode: Microcode Update Driver: v2.2.
>[    0.880132] sched_clock: Marking stable (879841972, 267559)->(887526161, -7416630)
>[    0.880450] registered taskstats version 1
>[    0.880459] Loading compiled-in X.509 certificates
>[    0.880487] zswap: loaded using pool lzo/zbud
>[    0.887887] Key type big_key registered
>[    0.888705]   Magic number: 10:558:840
>[    0.888842] rtc_cmos 00:01: setting system clock to 2018-11-30 14:48:02 UTC (1543589282)
>[    0.891890] Freeing unused decrypted memory: 2040K
>[    0.892345] Freeing unused kernel image memory: 1520K
>[    0.943766] Write protecting the kernel read-only data: 16384k
>[    0.944951] Freeing unused kernel image memory: 2020K
>[    0.945493] Freeing unused kernel image memory: 1032K
>[    0.945558] Run /init as init process
>[    1.014983] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.028354] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.028410] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.029569] rtsx_pci 0000:07:00.0: enabling device (0000 -> 0002)
>[    1.032079] SCSI subsystem initialized
>[    1.034447] ACPI: bus type USB registered
>[    1.034464] usbcore: registered new interface driver usbfs
>[    1.034470] usbcore: registered new interface driver hub
>[    1.034502] usbcore: registered new device driver usb
>[    1.036726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.037247] libata version 3.00 loaded.
>[    1.038538] ehci-pci: EHCI PCI platform driver
>[    1.038699] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    1.038705] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    1.038716] ehci-pci 0000:00:1a.0: debug port 2
>[    1.039636] ahci 0000:00:1f.2: version 3.0
>[    1.039832] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
>[    1.039834] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[    1.040401] scsi host0: ahci
>[    1.040545] scsi host1: ahci
>[    1.040619] scsi host2: ahci
>[    1.041032] scsi host3: ahci
>[    1.041111] scsi host4: ahci
>[    1.041183] scsi host5: ahci
>[    1.041219] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 31
>[    1.041220] ata2: DUMMY
>[    1.041221] ata3: DUMMY
>[    1.041221] ata4: DUMMY
>[    1.041222] ata5: DUMMY
>[    1.041222] ata6: DUMMY
>[    1.042612] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    1.042624] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a24000
>[    1.053731] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.053994] hub 1-0:1.0: USB hub found
>[    1.054001] hub 1-0:1.0: 2 ports detected
>[    1.054164] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.054171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.055066] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.055254] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
>[    1.055261] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.055622] hub 2-0:1.0: USB hub found
>[    1.055639] hub 2-0:1.0: 14 ports detected
>[    1.057750] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.057754] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.057758] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
>[    1.057760] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.057985] hub 3-0:1.0: USB hub found
>[    1.058000] hub 3-0:1.0: 6 ports detected
>[    1.058624] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    1.058642] ehci-pci 0000:00:1d.0: debug port 2
>[    1.062540] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.062558] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
>[    1.073721] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.074097] hub 4-0:1.0: USB hub found
>[    1.074106] hub 4-0:1.0: 2 ports detected
>[    1.357956] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.359391] ata1.00: NCQ Send/Recv Log not supported
>[    1.359397] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
>[    1.359401] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    1.360250] ata1.00: NCQ Send/Recv Log not supported
>[    1.360261] ata1.00: configured for UDMA/133
>[    1.360740] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
>[    1.367290] ata1.00: Enabling discard_zeroes_data
>[    1.367512] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
>[    1.367546] sd 0:0:0:0: [sda] Write Protect is off
>[    1.367552] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.367601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.367871] ata1.00: Enabling discard_zeroes_data
>[    1.369666]  sda: sda1 sda2
>[    1.370109] ata1.00: Enabling discard_zeroes_data
>[    1.370462] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.383663] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.390398] usb 2-6: new full-speed USB device number 2 using xhci_hcd
>[    1.403723] usb 4-1: new high-speed USB device number 2 using ehci-pci
>[    1.407238] PM: Image not found (code -22)
>[    1.458714] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.530960] hub 1-1:1.0: USB hub found
>[    1.531040] hub 1-1:1.0: 6 ports detected
>[    1.543479] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    1.554752] hub 4-1:1.0: USB hub found
>[    1.554858] hub 4-1:1.0: 8 ports detected
>[    1.557168] systemd[1]: Detected architecture x86-64.
>[    1.560493] systemd[1]: Set hostname to <lightning>.
>[    1.639918] systemd[1]: Listening on Process Core Dump Socket.
>[    1.640012] systemd[1]: Listening on udev Control Socket.
>[    1.640056] systemd[1]: Listening on initctl Compatibility Named Pipe.
>[    1.640135] systemd[1]: Listening on Journal Socket.
>[    1.642558] systemd[1]: Mounting POSIX Message Queue File System...
>[    1.643922] systemd[1]: Mounting Kernel Debug File System...
>[    1.644096] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    1.653670] usb 2-9: new full-speed USB device number 3 using xhci_hcd
>[    1.653939] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    1.666347] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.751675] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.751692] ACPI: Power Button [PWRB]
>[    1.751748] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
>[    1.751756] ACPI: Lid Switch [LID0]
>[    1.751804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.751811] ACPI: Power Button [PWRF]
>[    1.755810] systemd-journald[314]: Received request to flush runtime journal from PID 1
>[    1.758604] input: DELL Wireless hotkeys as /devices/virtual/input/input5
>[    1.762030] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
>[    1.764261] ACPI: AC Adapter [ACAD] (on-line)
>[    1.786142] ACPI: Invalid active2 threshold
>[    1.786240] thermal LNXTHERM:00: registered as thermal_zone8
>[    1.786241] ACPI: Thermal Zone [TZ00] (28 C)
>[    1.786584] thermal LNXTHERM:01: registered as thermal_zone9
>[    1.786585] ACPI: Thermal Zone [TZ01] (-268 C)
>[    1.813473] intel_pch_thermal 0000:00:1f.6: enabling device (0000 -> 0002)
>[    1.816810] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    1.816811] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    1.816812] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    1.816812] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    1.816813] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    1.819793] i801_smbus 0000:00:1f.3: SPD Write Disable is set
>[    1.819821] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    1.830402] tsc: Refined TSC clocksource calibration: 2194.918 MHz
>[    1.830410] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
>[    1.830425] clocksource: Switched to clocksource tsc
>[    1.838652] EDAC ie31200: No ECC support
>[    1.838877] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20181003/utaddress-213)
>[    1.838884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.838894] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20181003/utaddress-213)
>[    1.838898] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181003/utaddress-213)
>[    1.838902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.838913] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20181003/utaddress-213)
>[    1.838917] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181003/utaddress-213)
>[    1.838920] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181003/utaddress-213)
>[    1.838923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.838947] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20181003/utaddress-213)
>[    1.838951] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181003/utaddress-213)
>[    1.838956] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181003/utaddress-213)
>[    1.838961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.838962] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    1.866074] cryptd: max_cpu_qlen set to 1000
>[    1.873492] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
>[    1.874516] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    1.883383] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    1.887171] Linux agpgart interface v0.103
>[    1.887557] AVX2 version of gcm_enc/dec engaged.
>[    1.887558] AES CTR mode by8 optimization enabled
>[    1.891001] tpm_tis 00:07: 1.2 TPM (device-id 0x3204, rev-id 64)
>[    1.933931] usb 2-11: new high-speed USB device number 4 using xhci_hcd
>[    1.943233] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
>[    1.945941] dell_smbios: No SMBIOS backends available (wmi: -19, smm: -19)
>[    1.948860] dell_smbios: No dell-smbios drivers are loaded
>[    1.972979] Intel(R) Wireless WiFi driver for Linux
>[    1.972980] Copyright(c) 2003- 2015 Intel Corporation
>[    1.987268] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002)
>[    1.992111] iwlwifi 0000:06:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
>[    1.992982] Adding 9437180k swap on /swapfile.  Priority:-2 extents:7 across:10993660k SSFS
>[    1.999197] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.002914] iTCO_vendor_support: vendor-support=0
>[    2.004820] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.004862] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    2.004962] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.028428] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
>[    2.040811] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3661: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    2.040814] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    2.040816] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[    2.040818] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[    2.040819] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[    2.040821] snd_hda_codec_realtek hdaudioC1D0:      Headphone Mic=0x19
>[    2.040823] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x1b
>[    2.040825] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
>[    2.051070] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
>[    2.051309] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
>[    2.069735] VFIO - User Level meta-driver version: 0.3
>[    2.070397] battery: ACPI: Battery Slot [BAT1] (battery present)
>[    2.081863] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
>[    2.093486] nfc: nfc_init: NFC Core ver 0.1
>[    2.093505] NET: Registered protocol family 39
>[    2.099179] iwlwifi 0000:06:00.0: base HW address: 5c:51:4f:dc:e4:f2
>[    2.109053] intel_rapl: Found RAPL domain package
>[    2.109055] intel_rapl: Found RAPL domain core
>[    2.109056] intel_rapl: Found RAPL domain uncore
>[    2.109057] intel_rapl: Found RAPL domain dram
>[    2.109061] intel_rapl: RAPL package 0 domain package locked by BIOS
>[    2.109066] intel_rapl: RAPL package 0 domain dram locked by BIOS
>[    2.117660] Probing NFC pn544
>[    2.189626] media: Linux media interface: v0.10
>[    2.189744] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.189958] [drm:nouveau_drm_init [nouveau]] Loading Nouveau with parameters:
>[    2.189996] [drm:nouveau_drm_init [nouveau]] ... tv_disable   : 0
>[    2.190033] [drm:nouveau_drm_init [nouveau]] ... ignorelid    : 0
>[    2.190068] [drm:nouveau_drm_init [nouveau]] ... duallink     : 1
>[    2.190103] [drm:nouveau_drm_init [nouveau]] ... nofbaccel    : 0
>[    2.190138] [drm:nouveau_drm_init [nouveau]] ... config       : (null)
>[    2.190172] [drm:nouveau_drm_init [nouveau]] ... debug        : (null)
>[    2.190206] [drm:nouveau_drm_init [nouveau]] ... noaccel      : 0
>[    2.190240] [drm:nouveau_drm_init [nouveau]] ... modeset      : -1
>[    2.190271] [drm:nouveau_drm_init [nouveau]] ... runpm        : -1
>[    2.190305] [drm:nouveau_drm_init [nouveau]] ... vram_pushbuf : 0
>[    2.190339] [drm:nouveau_drm_init [nouveau]] ... hdmimhz      : 0
>[    2.190349] MXM: GUID detected in BIOS
>[    2.190436] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181003/nsarguments-66)
>[    2.190626] pci 0000:02:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
>[    2.190630] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
>[    2.190631] nouveau: detected PR support, will not use DSM
>[    2.200858] Bluetooth: Core ver 2.22
>[    2.200871] NET: Registered protocol family 31
>[    2.200872] Bluetooth: HCI device and connection manager initialized
>[    2.200875] Bluetooth: HCI socket layer initialized
>[    2.200876] Bluetooth: L2CAP socket layer initialized
>[    2.200879] Bluetooth: SCO socket layer initialized
>[    2.201726] usbcore: registered new interface driver usbhid
>[    2.201727] usbhid: USB HID core driver
>[    2.222986] input: SYNAPTICS Synaptics Large Touch Screen Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:06CB:1AC3.0001/input/input10
>[    2.223056] input: SYNAPTICS Synaptics Large Touch Screen Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:06CB:1AC3.0001/input/input11
>[    2.223119] hid-generic 0003:06CB:1AC3.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-6/input0
>[    2.226076] Setting dangerous option enable_fbc - tainting kernel
>[    2.229142] [drm:intel_pch_type [i915]] Found LynxPoint PCH
>[    2.229182] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
>[    2.229227] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no)
>[    2.229266] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
>[    2.229308] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[    2.229385] videodev: Linux video capture interface: v2.00
>[    2.229480] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M
>[    2.229521] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    2.229560] [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M
>[    2.229563] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
>[    2.229564] fb0: switching to inteldrmfb from EFI VGA
>[    2.229593] Console: switching to colour dummy device 80x25
>[    2.229663] [drm] Replacing VGA console driver
>[    2.230122] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = cf100017
>[    2.230181] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K
>[    2.230276] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>[    2.230332] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xcb52b018
>[    2.230394] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    2.230438] [drm:intel_opregion_setup [i915]] SWSCI supported
>[    2.231172] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    2.231217] [drm:intel_opregion_setup [i915]] ASLE supported
>[    2.231261] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[    2.231306] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    2.231308] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.231308] [drm] Driver supports precise vblank timestamp query.
>[    2.231353] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[    2.231399] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL        ", BDB version 170
>[    2.231445] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.231491] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    2.231848] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[    2.231894] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    2.231939] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    2.231986] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    2.232006] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    2.232052] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[    2.232098] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0
>[    2.232148] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables:
>[    2.232169] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.232213] [drm:intel_bios_init [i915]] DRRS State Enabled:0
>[    2.232256] [drm:intel_bios_init [i915]] VBT has unknown eDP link rate value 2
>[    2.232299] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
>[    2.232339] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    2.232382] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[    2.232425] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.232467] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 6
>[    2.232510] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.232553] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 6
>[    2.232604] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    2.232647] [drm:i915_driver_load [i915]] rawclk rate: 125000 kHz
>[    2.232688] [drm:intel_power_well_enable [i915]] enabling always-on
>[    2.232737] [drm:intel_power_well_enable [i915]] enabling display
>[    2.232742] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.233023] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
>[    2.233071] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec)
>[    2.233114] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec)
>[    2.233157] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 36 (18.0 usec)
>[    2.233198] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 90 (45.0 usec)
>[    2.233241] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec)
>[    2.233283] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec)
>[    2.233324] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec)
>[    2.233366] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 36 (18.0 usec)
>[    2.233407] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 90 (45.0 usec)
>[    2.233449] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec)
>[    2.233490] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec)
>[    2.233531] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec)
>[    2.233572] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 36 (18.0 usec)
>[    2.233614] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 90 (45.0 usec)
>[    2.233654] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec)
>[    2.233705] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    2.233792] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 540000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0
>[    2.233838] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz
>[    2.233882] [drm:intel_modeset_init [i915]] Max dotclock rate: 540000 kHz
>[    2.234234] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
>[    2.234278] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[    2.234337] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    2.234381] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 200 t9 2000 t10 500 t11_t12 6000
>[    2.234424] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>[    2.234467] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 20, off delay 200
>[    2.234528] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x186906
>[    2.234574] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    2.234621] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[    2.234622] usbcore: registered new interface driver btusb
>[    2.235057] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    2.235433] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID  HW-rev 0.1 SW-rev 6.7 quirks 0x0000
>[    2.235770] [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 fb c7
>[    2.236097] [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1
>[    2.239574] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    2.239589] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.239617] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.239666] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    2.239715] [drm:lpt_setup_backlight [i915]] Backlight PCH value: 861, converted to freq 1134, converted to lpt units 930, minmax: 249/4882
>[    2.239762] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 930/4882
>[    2.239819] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
>[    2.239865] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    2.239911] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
>[    2.239964] [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
>[    2.240009] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    2.240062] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    2.240109] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>[    2.240187] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled
>[    2.240234] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe B] hw state readout: disabled
>[    2.240281] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:63:pipe C] hw state readout: disabled
>[    2.240327] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:28:primary A] hw state readout: enabled, pipe A
>[    2.240388] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:sprite A] hw state readout: disabled, pipe A
>[    2.240433] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:36:cursor A] hw state readout: disabled, pipe A
>[    2.240476] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:primary B] hw state readout: disabled, pipe B
>[    2.240519] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:sprite B] hw state readout: disabled, pipe B
>[    2.240563] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:48:cursor B] hw state readout: disabled, pipe B
>[    2.240606] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:primary C] hw state readout: disabled, pipe C
>[    2.240650] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:sprite C] hw state readout: disabled, pipe C
>[    2.240693] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:cursor C] hw state readout: disabled, pipe C
>[    2.240737] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    2.240781] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    2.240826] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[    2.240870] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[    2.240913] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1
>[    2.240956] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[    2.241003] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:64:DDI A] hw state readout: enabled, pipe A
>[    2.241046] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:73:DDI B] hw state readout: disabled, pipe A
>[    2.241090] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:80:DDI C] hw state readout: disabled, pipe A
>[    2.241133] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:82:DP-MST A] hw state readout: disabled, pipe A
>[    2.241177] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:83:DP-MST B] hw state readout: disabled, pipe B
>[    2.241220] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:84:DP-MST C] hw state readout: disabled, pipe C
>[    2.241265] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:65:eDP-1] hw state readout: enabled
>[    2.241308] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:74:HDMI-A-1] hw state readout: disabled
>[    2.241353] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:81:DP-1] hw state readout: disabled
>[    2.241396] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:87:HDMI-A-2] hw state readout: disabled
>[    2.241413] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 000000009b81f1f0
>[    2.241461] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state]
>[    2.241503] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[    2.241546] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[    2.241589] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
>[    2.241633] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64
>[    2.241675] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.241717] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.241732] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 140999 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9
>[    2.241774] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.241789] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 140999 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9
>[    2.241834] [drm:intel_dump_pipe_config [i915]] crtc timings: 140999 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x40 flags: 0x9
>[    2.241877] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 140999
>[    2.241920] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.241963] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.242007] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    2.242049] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.242092] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = -1
>[    2.242135] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = -1
>[    2.242178] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = -1
>[    2.242221] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe B][setup_hw_state]
>[    2.242263] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[    2.242306] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[    2.242348] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    2.242390] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.242433] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.242448] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.242490] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.242504] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.242548] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.242589] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    2.242632] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.242673] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.242716] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    2.242757] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.242801] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = -1
>[    2.242844] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite B] disabled, scaler_id = -1
>[    2.242887] [drm:intel_dump_pipe_config [i915]] [PLANE:48:cursor B] disabled, scaler_id = -1
>[    2.242929] [drm:intel_dump_pipe_config [i915]] [CRTC:63:pipe C][setup_hw_state]
>[    2.242972] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[    2.243014] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[    2.243058] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    2.243100] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.243142] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.243156] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.243209] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.243222] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.243262] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.243303] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    2.243344] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.243411] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.243453] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    2.243496] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.243539] [drm:intel_dump_pipe_config [i915]] [PLANE:52:primary C] disabled, scaler_id = -1
>[    2.243582] [drm:intel_dump_pipe_config [i915]] [PLANE:55:sprite C] disabled, scaler_id = -1
>[    2.243624] [drm:intel_dump_pipe_config [i915]] [PLANE:60:cursor C] disabled, scaler_id = -1
>[    2.243680] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[    2.243731] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[    2.243792] [drm:i9xx_get_initial_plane_config [i915]] pipe A/primary A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    2.243834] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000
>[    2.243888] [drm:intel_alloc_initial_plane_obj.isra.149 [i915]] initial plane fb obj 00000000a8ef5c8a
>[    2.243945] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f8e74986
>[    2.243960] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000168a6d77 state to 00000000f8e74986
>[    2.243974] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000d0c3129b state to 00000000f8e74986
>[    2.243989] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 000000008d7baa99 state to 00000000f8e74986
>[    2.244003] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000836e238a state to 00000000f8e74986
>[    2.244018] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000f1590172 state to 00000000f8e74986
>[    2.244033] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 0000000035213050 state to 00000000f8e74986
>[    2.244046] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 000000003749c209 state to 00000000f8e74986
>[    2.244060] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 00000000196b24a7 state to 00000000f8e74986
>[    2.244075] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000c9188d7a state to 00000000f8e74986
>[    2.244089] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000ba0f67e0 state to 00000000f8e74986
>[    2.244103] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 000000005d91b235 state to 00000000f8e74986
>[    2.244125] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 00000000931d13b0 state to 00000000f8e74986
>[    2.244139] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 00000000610192c5 state to 00000000f8e74986
>[    2.244152] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:74:HDMI-A-1] 000000002448ef0d state to 00000000f8e74986
>[    2.244164] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:81:DP-1] 00000000e9b91819 state to 00000000f8e74986
>[    2.244176] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:87:HDMI-A-2] 000000009cae3d6a state to 00000000f8e74986
>[    2.244188] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[    2.244194] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[    2.244201] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:74:HDMI-A-1]
>[    2.244207] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:74:HDMI-A-1]
>[    2.244212] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:81:DP-1]
>[    2.244218] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:81:DP-1]
>[    2.244223] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:87:HDMI-A-2]
>[    2.244229] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:87:HDMI-A-2]
>[    2.244275] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.244317] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.244337] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f8e74986
>[    2.244352] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f8e74986
>[    2.244364] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f8e74986
>[    2.244377] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 000000008d7baa99 state to 00000000f8e74986
>[    2.244389] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:39:pipe A] to 00000000f8e74986
>[    2.244428] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 000000005d91b235 state to 00000000f8e74986
>[    2.244441] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000d0c3129b state to 00000000f8e74986
>[    2.244453] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000168a6d77 state to 00000000f8e74986
>[    2.244465] [drm:drm_atomic_check_only [drm]] checking 00000000f8e74986
>[    2.244511] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.244554] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.244571] [drm:drm_atomic_commit [drm]] committing 00000000f8e74986
>[    2.244627] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    2.244670] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[    2.247583] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:573c)
>[    2.247914] Bluetooth: hci0: read Intel version: 370710018002030d57
>[    2.247916] Bluetooth: hci0: Intel device is already patched. patch num: 57
>[    2.256210] uvcvideo 2-11:1.0: Entity type for entity Extension 4 was not initialized!
>[    2.256212] uvcvideo 2-11:1.0: Entity type for entity Extension 7 was not initialized!
>[    2.256213] uvcvideo 2-11:1.0: Entity type for entity Processing 2 was not initialized!
>[    2.256215] uvcvideo 2-11:1.0: Entity type for entity Camera 1 was not initialized!
>[    2.256252] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f8e74986
>[    2.256272] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f8e74986
>[    2.256304] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.0/input/input13
>[    2.256388] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7ea000, 80000000]
>[    2.257590] [drm:intel_ctx_workarounds_init [i915]] Number of context specific w/a: 0
>[    2.257632] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    2.257977] [drm:sandybridge_pcode_read [i915]] warning: pcode (read from mbox 1a) mailbox access failed for intel_init_gt_powersave [i915]: -6
>[    2.258013] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1150MHz, overclock: 1150MHz
>[    2.258210] [drm:sandybridge_pcode_read [i915]] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave [i915]: -6
>[    2.258358] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    2.258390] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    2.258422] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    2.258456] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    2.258488] [drm:intel_fbdev_init [i915]] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    2.258520] [drm:intel_fbdev_init [i915]] fb big enough for plane A (8294400 >= 8294400)
>[    2.258552] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
>[    2.258583] [drm:intel_fbdev_init [i915]] pipe C not active, skipping
>[    2.258615] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[    2.258918] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    2.258956] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    2.259071] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-1
>[    2.259134] [drm] Initialized i915 1.6.0 20181122 for 0000:00:02.0 on minor 0
>[    2.259230] [drm:intel_opregion_resume [i915]] 4 outputs detected
>[    2.259595] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    2.260104] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
>[    2.260141] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input14
>[    2.260444] usbcore: registered new interface driver uvcvideo
>[    2.260445] USB Video Class driver (1.1.1)
>[    2.260965] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.261088] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
>[    2.287221] snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0
>[    2.287303] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    2.287370] [drm:intel_power_well_disable [i915]] disabling display
>[    2.287385] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    2.287396] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1]
>[    2.287399] i915 device info: pciid=0x0416 rev=0x06 platform=HASWELL gen=7
>[    2.287401] i915 device info: is_mobile: no
>[    2.287468] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1]
>[    2.287469] i915 device info: is_lp: no
>[    2.287471] i915 device info: is_alpha_support: no
>[    2.287530] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000
>[    2.287532] i915 device info: has_64bit_reloc: no
>[    2.287533] i915 device info: has_csr: no
>[    2.287591] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.287593] i915 device info: has_ddi: yes
>[    2.287651] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.287652] i915 device info: has_dp_mst: yes
>[    2.287654] i915 device info: has_reset_engine: no
>[    2.287655] i915 device info: has_fbc: yes
>[    2.287656] i915 device info: has_fpga_dbg: yes
>[    2.287658] i915 device info: has_gmch_display: no
>[    2.287659] i915 device info: has_guc: no
>[    2.287661] i915 device info: has_guc_ct: no
>[    2.287663] i915 device info: has_hotplug: yes
>[    2.287665] i915 device info: has_l3_dpf: yes
>[    2.287667] i915 device info: has_llc: yes
>[    2.287668] i915 device info: has_logical_ring_contexts: no
>[    2.287670] i915 device info: has_logical_ring_elsq: no
>[    2.287672] i915 device info: has_logical_ring_preemption: no
>[    2.287673] i915 device info: has_overlay: no
>[    2.287675] i915 device info: has_pooled_eu: no
>[    2.287677] i915 device info: has_psr: yes
>[    2.287678] i915 device info: has_rc6: yes
>[    2.287680] i915 device info: has_rc6p: no
>[    2.287682] i915 device info: has_runtime_pm: yes
>[    2.287684] i915 device info: has_snoop: no
>[    2.287685] i915 device info: has_coherent_ggtt: yes
>[    2.287687] i915 device info: unfenced_needs_alignment: no
>[    2.287689] i915 device info: cursor_needs_physical: no
>[    2.287691] i915 device info: hws_needs_physical: no
>[    2.287692] i915 device info: overlay_needs_physical: no
>[    2.287694] i915 device info: supports_tv: no
>[    2.287696] i915 device info: has_ipc: no
>[    2.287698] i915 device info: slice total: 1, mask=0001
>[    2.287699] i915 device info: subslice total: 2
>[    2.287702] i915 device info: slice0: 2 subslices, mask=0003
>[    2.287704] i915 device info: EU total: 20
>[    2.287705] i915 device info: EU per subslice: 10
>[    2.287707] i915 device info: has slice power gating: no
>[    2.287709] i915 device info: has subslice power gating: no
>[    2.287710] i915 device info: has EU power gating: no
>[    2.287712] i915 device info: CS timestamp frequency: 12500 kHz
>[    2.287836] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:06CB:1AC3.0001/input/input17
>[    2.287996] hid-multitouch 0003:06CB:1AC3.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-6/input0
>[    2.288061] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID  HW-rev 0.1 SW-rev 6.7 quirks 0x0000
>[    2.288144] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    2.288773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] status updated from unknown to connected
>[    2.288809] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.288839] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    2.288863] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.288918] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] probed modes :
>[    2.288945] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[    2.288960] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1]
>[    2.289043] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
>[    2.289322] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.289401] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.289678] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.289705] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.289786] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.289864] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.290794] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.290874] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.291145] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.291225] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.291499] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.291515] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.291530] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1] status updated from unknown to disconnected
>[    2.291548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1] disconnected
>[    2.291562] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1]
>[    2.291647] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-1]
>[    2.291664] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1] status updated from unknown to disconnected
>[    2.291677] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1] disconnected
>[    2.291692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2]
>[    2.291773] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
>[    2.292037] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.292114] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.292384] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.292411] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.292491] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.292568] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    2.293560] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.293642] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    2.293921] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.293991] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.294239] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.294254] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.294266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2] status updated from unknown to disconnected
>[    2.294279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2] disconnected
>[    2.294291] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? yes
>[    2.294302] [drm:drm_setup_crtcs [drm_kms_helper]] connector 74 enabled? no
>[    2.294313] [drm:drm_setup_crtcs [drm_kms_helper]] connector 81 enabled? no
>[    2.294323] [drm:drm_setup_crtcs [drm_kms_helper]] connector 87 enabled? no
>[    2.294406] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.294420] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 65
>[    2.294433] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 65 0
>[    2.294446] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    2.294458] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    2.294474] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 39 (0,0)
>[    2.294556] [drm:intelfb_create [i915]] re-using BIOS fb
>[    2.294643] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00000000
>[    2.294734] fbcon: inteldrmfb (fb0) is primary device
>[    2.294821] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000015df4da3
>[    2.294841] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 0000000029863e64 state to 0000000015df4da3
>[    2.294861] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000f2e91dd0 state to 0000000015df4da3
>[    2.294880] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 0000000092b106ed state to 0000000015df4da3
>[    2.294897] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 0000000092b106ed
>[    2.294914] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 000000008a6c2ddb state to 0000000015df4da3
>[    2.294930] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 000000008a6c2ddb
>[    2.294948] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 00000000170e6485 state to 0000000015df4da3
>[    2.294967] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 0000000084522033 state to 0000000015df4da3
>[    2.294982] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 0000000084522033
>[    2.295001] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 0000000043b22342 state to 0000000015df4da3
>[    2.295016] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 0000000043b22342
>[    2.295034] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 000000002f70b799 state to 0000000015df4da3
>[    2.295051] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 0000000097754cd8 state to 0000000015df4da3
>[    2.295067] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 0000000097754cd8
>[    2.295084] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 000000003239ea4c state to 0000000015df4da3
>[    2.295099] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 000000003239ea4c
>[    2.295117] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 00000000f2e91dd0
>[    2.295133] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:91] for [PLANE:28:primary A] state 0000000029863e64
>[    2.295151] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 0000000015df4da3
>[    2.295170] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 0000000039f65e8d state to 0000000015df4da3
>[    2.295187] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 0000000039f65e8d to [NOCRTC]
>[    2.295202] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 0000000039f65e8d to [CRTC:39:pipe A]
>[    2.295223] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000b8aa2f6d state to 0000000015df4da3
>[    2.295238] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 00000000b8aa2f6d
>[    2.295252] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 00000000170e6485
>[    2.295269] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 0000000015df4da3
>[    2.295288] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 000000006d912305 state to 0000000015df4da3
>[    2.295305] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 000000006d912305
>[    2.295320] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 000000002f70b799
>[    2.295337] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 0000000015df4da3
>[    2.295355] [drm:drm_atomic_check_only [drm]] checking 0000000015df4da3
>[    2.295368] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[    2.295378] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[    2.295388] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] needs all connectors, enable: y, active: y
>[    2.295406] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 0000000015df4da3
>[    2.295423] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:39:pipe A] to 0000000015df4da3
>[    2.295488] [drm:intel_atomic_check [i915]] [CONNECTOR:65:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 36, max platform bpp 36
>[    2.295552] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 18 pixel clock 141000KHz
>[    2.295612] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 18
>[    2.295673] [drm:intel_dp_compute_config [i915]] DP link rate required 317250 available 540000
>[    2.295736] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1
>[    2.295801] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][fastset]
>[    2.295865] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[    2.295924] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[    2.295990] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[    2.296054] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64
>[    2.296116] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.296177] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.296198] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[    2.296258] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.296279] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[    2.296342] [drm:intel_dump_pipe_config [i915]] crtc timings: 141000 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x48 flags: 0x9
>[    2.296402] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 141000
>[    2.296464] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.296527] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.296588] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    2.296902] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.296966] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:91, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    2.297031] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = -1
>[    2.297125] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = -1
>[    2.297178] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.297230] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.297251] [drm:drm_atomic_commit [drm]] committing 0000000015df4da3
>[    2.298138] mousedev: PS/2 mouse device common for all mice
>[    2.306223] [drm:verify_connector_state.isra.108 [i915]] [CONNECTOR:65:eDP-1]
>[    2.306275] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A]
>[    2.306328] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 1350
>[    2.306358] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000015df4da3
>[    2.306370] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000015df4da3
>[    2.306395] Console: switching to colour frame buffer device 240x67
>[    2.306412] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000015df4da3
>[    2.306421] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000ee31a859 state to 0000000015df4da3
>[    2.306445] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000b3509e51 state to 0000000015df4da3
>[    2.306454] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 000000001b1ddf9c state to 0000000015df4da3
>[    2.306464] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 000000001b1ddf9c
>[    2.306477] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000c28740c8 state to 0000000015df4da3
>[    2.306499] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000c28740c8
>[    2.306538] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=400/4882
>[    2.306549] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 00000000fb82da9b state to 0000000015df4da3
>[    2.306586] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 629
>[    2.306597] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 000000008798e974 state to 0000000015df4da3
>[    2.306607] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 000000008798e974
>[    2.306633] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 000000003f01606d state to 0000000015df4da3
>[    2.306643] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 000000003f01606d
>[    2.306656] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000f9d7348e state to 0000000015df4da3
>[    2.306668] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 0000000078f1e4a9 state to 0000000015df4da3
>[    2.306678] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 0000000078f1e4a9
>[    2.306690] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 00000000086efa7a state to 0000000015df4da3
>[    2.306700] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 00000000086efa7a
>[    2.306727] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 00000000b3509e51
>[    2.306739] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:91] for [PLANE:28:primary A] state 00000000ee31a859
>[    2.306765] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 0000000015df4da3
>[    2.306779] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000005b831fbc state to 0000000015df4da3
>[    2.306790] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000005b831fbc to [NOCRTC]
>[    2.306802] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000005b831fbc to [CRTC:39:pipe A]
>[    2.306815] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000c9a1be69 state to 0000000015df4da3
>[    2.306826] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 00000000c9a1be69
>[    2.306837] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 00000000fb82da9b
>[    2.306848] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 0000000015df4da3
>[    2.306861] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000745d2f07 state to 0000000015df4da3
>[    2.306872] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 00000000745d2f07
>[    2.306882] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 00000000f9d7348e
>[    2.306894] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 0000000015df4da3
>[    2.306905] [drm:drm_atomic_check_only [drm]] checking 0000000015df4da3
>[    2.306919] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[    2.306926] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[    2.306986] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.307037] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.307051] [drm:drm_atomic_commit [drm]] committing 0000000015df4da3
>[    2.323495] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    2.323678] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000015df4da3
>[    2.323700] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000015df4da3
>[    2.326384] iwlwifi 0000:06:00.0 wlp6s0: renamed from wlan0
>[    2.328167] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.370364] [drm:drm_fb_helper_hotplug_event.part.37 [drm_kms_helper]] 
>[    2.370374] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    2.370386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1]
>[    2.370462] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1]
>[    2.370530] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000
>[    2.370594] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.370657] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.371081] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID  HW-rev 0.1 SW-rev 6.7 quirks 0x0000
>[    2.371147] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    2.371804] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.371834] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    2.371860] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.371914] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] probed modes :
>[    2.371940] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[    2.371953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1]
>[    2.372015] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
>[    2.372079] [drm:intel_power_well_enable [i915]] enabling display
>[    2.372235] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.372271] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.372506] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.372524] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.372563] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.372598] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.373614] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.373638] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.373859] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.373883] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.374084] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.374090] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.374096] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1] disconnected
>[    2.374101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1]
>[    2.374123] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-1]
>[    2.374135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1] disconnected
>[    2.374140] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2]
>[    2.374161] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
>[    2.374363] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.374385] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.374595] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.374603] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.374623] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.374643] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    2.376021] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.376040] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    2.376250] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.376269] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.376478] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.376483] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.376488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2] disconnected
>[    2.376492] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? yes
>[    2.376513] [drm:drm_setup_crtcs [drm_kms_helper]] connector 74 enabled? no
>[    2.376517] [drm:drm_setup_crtcs [drm_kms_helper]] connector 81 enabled? no
>[    2.376521] [drm:drm_setup_crtcs [drm_kms_helper]] connector 87 enabled? no
>[    2.376558] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.376563] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 65
>[    2.376567] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 65 0
>[    2.376570] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    2.376574] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
>[    2.376593] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 39 (0,0)
>[    2.376605] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000cdaf3d89
>[    2.376615] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000487bb8b1 state to 00000000cdaf3d89
>[    2.376626] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 000000005769aecc state to 00000000cdaf3d89
>[    2.376635] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000ef3cc62a state to 00000000cdaf3d89
>[    2.376644] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 00000000ef3cc62a
>[    2.376653] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 000000006479b60b state to 00000000cdaf3d89
>[    2.376661] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 000000006479b60b
>[    2.376670] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 000000001f454d10 state to 00000000cdaf3d89
>[    2.376681] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 000000001d2332e9 state to 00000000cdaf3d89
>[    2.376689] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 000000001d2332e9
>[    2.376699] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000ce6b47ac state to 00000000cdaf3d89
>[    2.376708] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 00000000ce6b47ac
>[    2.376718] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000781046c0 state to 00000000cdaf3d89
>[    2.376728] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 00000000f875e61d state to 00000000cdaf3d89
>[    2.376737] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 00000000f875e61d
>[    2.376746] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 0000000077756c3e state to 00000000cdaf3d89
>[    2.376755] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 0000000077756c3e
>[    2.376765] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 000000005769aecc
>[    2.376774] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:91] for [PLANE:28:primary A] state 00000000487bb8b1
>[    2.376784] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000cdaf3d89
>[    2.376795] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000004226fe23 state to 00000000cdaf3d89
>[    2.376805] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000004226fe23 to [NOCRTC]
>[    2.376813] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000004226fe23 to [CRTC:39:pipe A]
>[    2.376824] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000c245d995 state to 00000000cdaf3d89
>[    2.376833] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 00000000c245d995
>[    2.376841] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 000000001f454d10
>[    2.376851] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000cdaf3d89
>[    2.376861] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 000000006825a5e7 state to 00000000cdaf3d89
>[    2.376870] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 000000006825a5e7
>[    2.376878] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 00000000781046c0
>[    2.376888] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000cdaf3d89
>[    2.376898] [drm:drm_atomic_check_only [drm]] checking 00000000cdaf3d89
>[    2.376905] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[    2.376911] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[    2.376938] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.376961] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.376974] [drm:drm_atomic_commit [drm]] committing 00000000cdaf3d89
>[    2.389461] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000cdaf3d89
>[    2.389477] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000cdaf3d89
>[    2.389497] [drm:drm_fb_helper_hotplug_event.part.37 [drm_kms_helper]] 
>[    2.389501] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    2.389507] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1]
>[    2.389533] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1]
>[    2.389556] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000
>[    2.389577] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.389598] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.389990] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID  HW-rev 0.1 SW-rev 6.7 quirks 0x0000
>[    2.390016] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    2.390683] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.390734] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    2.390758] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    2.390828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] probed modes :
>[    2.390873] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[    2.390898] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1]
>[    2.391001] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
>[    2.391300] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.391399] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.391679] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.391732] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.391802] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.391859] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.392457] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    2.392479] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    2.392499] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    2.392519] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    2.392539] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    2.392558] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    2.392578] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    2.392599] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    2.392622] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    2.392912] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.392940] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.393183] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.393236] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.393348] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
>[    2.393411] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
>[    2.393470] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
>[    2.393529] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
>[    2.393574] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.393610] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
>[    2.393641] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.393698] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1] disconnected
>[    2.393711] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1]
>[    2.393743] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-1]
>[    2.393782] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-1] disconnected
>[    2.393790] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2]
>[    2.393819] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
>[    2.393867] [drm:intel_power_well_disable [i915]] disabling display
>[    2.394011] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.394039] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.394251] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.394270] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.394298] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.394325] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    2.395356] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.395388] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    2.395596] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.395618] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.395813] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.395818] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.395823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2] disconnected
>[    2.395828] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? yes
>[    2.395833] [drm:drm_setup_crtcs [drm_kms_helper]] connector 74 enabled? no
>[    2.395837] [drm:drm_setup_crtcs [drm_kms_helper]] connector 81 enabled? no
>[    2.395840] [drm:drm_setup_crtcs [drm_kms_helper]] connector 87 enabled? no
>[    2.395863] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.395868] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 65
>[    2.395873] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 65 0
>[    2.395877] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    2.395882] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
>[    2.395888] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 39 (0,0)
>[    2.395902] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000cdaf3d89
>[    2.395913] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000ace64ac7 state to 00000000cdaf3d89
>[    2.395924] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000dd272add state to 00000000cdaf3d89
>[    2.395935] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000da24ed03 state to 00000000cdaf3d89
>[    2.395944] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 00000000da24ed03
>[    2.395954] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000f5ec9db7 state to 00000000cdaf3d89
>[    2.395962] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000f5ec9db7
>[    2.395973] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 000000000d7278ff state to 00000000cdaf3d89
>[    2.395983] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 00000000e81da09d state to 00000000cdaf3d89
>[    2.395991] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 00000000e81da09d
>[    2.396002] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000c6d3fe06 state to 00000000cdaf3d89
>[    2.396010] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 00000000c6d3fe06
>[    2.396020] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000bc21d06c state to 00000000cdaf3d89
>[    2.396030] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 00000000406b2431 state to 00000000cdaf3d89
>[    2.396039] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 00000000406b2431
>[    2.396049] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 000000001ea3b6e3 state to 00000000cdaf3d89
>[    2.396057] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 000000001ea3b6e3
>[    2.396067] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 00000000dd272add
>[    2.396076] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:91] for [PLANE:28:primary A] state 00000000ace64ac7
>[    2.396086] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000cdaf3d89
>[    2.396097] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000002b865135 state to 00000000cdaf3d89
>[    2.396106] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000002b865135 to [NOCRTC]
>[    2.396115] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000002b865135 to [CRTC:39:pipe A]
>[    2.396126] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000b63cb1b2 state to 00000000cdaf3d89
>[    2.396134] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 00000000b63cb1b2
>[    2.396143] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 000000000d7278ff
>[    2.396152] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000cdaf3d89
>[    2.396165] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000c2988783 state to 00000000cdaf3d89
>[    2.396173] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 00000000c2988783
>[    2.396181] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 00000000bc21d06c
>[    2.396191] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000cdaf3d89
>[    2.396201] [drm:drm_atomic_check_only [drm]] checking 00000000cdaf3d89
>[    2.396209] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[    2.396215] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[    2.396241] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.396264] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.396278] [drm:drm_atomic_commit [drm]] committing 00000000cdaf3d89
>[    2.406150] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000cdaf3d89
>[    2.406167] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000cdaf3d89
>[    2.436942] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f59f698a
>[    2.436975] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 000000008798e974 state to 00000000f59f698a
>[    2.437031] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000a0d1a93a state to 00000000f59f698a
>[    2.437062] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 0000000098654120 state to 00000000f59f698a
>[    2.437090] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 0000000098654120
>[    2.437120] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000ddd78767 state to 00000000f59f698a
>[    2.437146] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000ddd78767
>[    2.437176] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 0000000002b840a0 state to 00000000f59f698a
>[    2.437206] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 000000006673c29c state to 00000000f59f698a
>[    2.437232] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 000000006673c29c
>[    2.437261] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 000000000279d99c state to 00000000f59f698a
>[    2.437286] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 000000000279d99c
>[    2.437316] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000fbdada8d state to 00000000f59f698a
>[    2.437345] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 00000000cd5111be state to 00000000f59f698a
>[    2.437370] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 00000000cd5111be
>[    2.437400] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 0000000022946f99 state to 00000000f59f698a
>[    2.437425] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 0000000022946f99
>[    2.437455] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 00000000a0d1a93a
>[    2.437482] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:91] for [PLANE:28:primary A] state 000000008798e974
>[    2.437511] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000f59f698a
>[    2.437542] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 00000000ead7ced7 state to 00000000f59f698a
>[    2.437568] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 00000000ead7ced7 to [NOCRTC]
>[    2.437595] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 00000000ead7ced7 to [CRTC:39:pipe A]
>[    2.437625] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 000000007059437b state to 00000000f59f698a
>[    2.437651] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 000000007059437b
>[    2.437678] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 0000000002b840a0
>[    2.437706] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000f59f698a
>[    2.437737] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000c495fc7e state to 00000000f59f698a
>[    2.437763] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 00000000c495fc7e
>[    2.437787] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 00000000fbdada8d
>[    2.437815] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000f59f698a
>[    2.437844] [drm:drm_atomic_check_only [drm]] checking 00000000f59f698a
>[    2.437870] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[    2.437887] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[    2.437974] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[    2.438049] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[    2.438090] [drm:drm_atomic_commit [drm]] committing 00000000f59f698a
>[    2.439448] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f59f698a
>[    2.439469] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f59f698a
>[    2.964240] psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4646]
>[    3.023097] psmouse serio1: synaptics: queried min coordinates: x [1386..], y [1252..]
>[    3.023110] psmouse serio1: synaptics: Your touchpad (PNP: DLL060d PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
>[    3.137801] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 2733, fw id: 1515627
>[    3.206295] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>[    3.250730] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
>[    3.250986] nouveau 0000:02:00.0: NVIDIA GK107 (0e7360a2)
>[    3.279044] nouveau 0000:02:00.0: bios: version 80.07.b3.00.20
>[    3.422330] nouveau 0000:02:00.0: fb: 2048 MiB GDDR5
>[    3.428495] nouveau 0000:02:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
>[    3.504124] vga_switcheroo: enabled
>[    3.504277] [TTM] Zone  kernel: Available graphics memory: 4035394 kiB
>[    3.504278] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    3.504279] [TTM] Initializing pool allocator
>[    3.504281] [TTM] Initializing DMA pool allocator
>[    3.504292] nouveau 0000:02:00.0: DRM: VRAM: 2048 MiB
>[    3.504293] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
>[    3.504295] nouveau 0000:02:00.0: DRM: Pointer to BIT loadval table invalid
>[    3.504305] nouveau 0000:02:00.0: DRM: Pointer to TMDS table invalid
>[    3.504332] nouveau 0000:02:00.0: DRM: DCB version 4.0
>[    3.504333] nouveau 0000:02:00.0: DRM: Pointer to flat panel table invalid
>[    3.506277] nouveau 0000:02:00.0: DRM: MM: using COPY for buffer copies
>[    3.506447] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 1
>[    5.563879] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[    5.563968] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[    8.550439] nouveau 0000:02:00.0: DRM: evicting buffers...
>[    8.550445] nouveau 0000:02:00.0: DRM: waiting for kernel channels to go idle...
>[    8.550475] nouveau 0000:02:00.0: DRM: suspending fence...
>[    8.556362] nouveau 0000:02:00.0: DRM: suspending object tree...
>
>[   14.109619] TOLGA: Trying to set backlight brightness to 1 and 2 seconds later to 400
>
>[   14.109873] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=1/4882
>[   14.109956] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 250
>[   16.113227] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=400/4882
>[   16.113296] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 629
>
>TOLGA: Initiating Hibernation
>
>[   24.816206] PM: Image not found (code -22)
>[   24.816749] PM: hibernation entry
>[   24.817144] PM: Syncing filesystems ... 
>[   24.846091] PM: done.
>[   24.846093] Freezing user space processes ... (elapsed 0.000 seconds) done.
>[   24.847058] OOM killer disabled.
>[   24.847154] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[   24.847156] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[   24.847157] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
>[   24.847162] PM: Marking nosave pages: [mem 0xc64af000-0xc64b5fff]
>[   24.847163] PM: Marking nosave pages: [mem 0xc68fb000-0xc6f16fff]
>[   24.847204] PM: Marking nosave pages: [mem 0xca800000-0xcbffefff]
>[   24.847353] PM: Marking nosave pages: [mem 0xcc000000-0xffffffff]
>[   24.848409] PM: Basic memory bitmaps created
>[   24.848852] PM: Preallocating image memory... done (allocated 121816 pages)
>[   25.002854] PM: Allocated 487264 kbytes in 0.15 seconds (3248.42 MB/s)
>[   25.002855] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[   25.003968] printk: Suspending console(s) (use no_console_suspend to debug)
>[   25.004116] [drm:intel_power_well_enable [i915]] enabling display
>[   25.044572] Removing pn544
>[   25.103710] [drm:intel_power_well_disable [i915]] disabling display
>[   25.103772] [drm:intel_power_well_enable [i915]] enabling display
>[   25.103816] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a7533750
>[   25.103828] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000d869e105 state to 00000000a7533750
>[   25.103837] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000744a9fe5 state to 00000000a7533750
>[   25.103846] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 0000000060ee1178 state to 00000000a7533750
>[   25.103855] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 000000001bd0f455 state to 00000000a7533750
>[   25.103864] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000f4c7adef state to 00000000a7533750
>[   25.103873] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000c3e5d6f6 state to 00000000a7533750
>[   25.103882] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 00000000d6bc04e1 state to 00000000a7533750
>[   25.103891] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 000000001ae903b1 state to 00000000a7533750
>[   25.103899] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 000000009df89290 state to 00000000a7533750
>[   25.103908] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 000000007a1a2fa3 state to 00000000a7533750
>[   25.103916] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 000000008f726110 state to 00000000a7533750
>[   25.103925] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 00000000f44f43bc state to 00000000a7533750
>[   25.103934] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000005afdc48d state to 00000000a7533750
>[   25.103944] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:74:HDMI-A-1] 0000000060e2e328 state to 00000000a7533750
>[   25.103962] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:81:DP-1] 00000000ea11c541 state to 00000000a7533750
>[   25.103971] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:87:HDMI-A-2] 000000000b58ea65 state to 00000000a7533750
>[   25.103980] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000011bbf4cd
>[   25.103989] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000c8b16918 state to 0000000011bbf4cd
>[   25.103997] [drm:drm_atomic_set_mode_prop_for_crtc [drm]] Set [NOMODE] for [CRTC:39:pipe A] state 00000000c8b16918
>[   25.104006] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:39:pipe A] to 0000000011bbf4cd
>[   25.104015] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 0000000004f21ca8 state to 0000000011bbf4cd
>[   25.104024] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 0000000011bbf4cd
>[   25.104033] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 0000000056f39e5f state to 0000000011bbf4cd
>[   25.104043] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000db6173d3 state to 0000000011bbf4cd
>[   25.104052] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe B] to 0000000011bbf4cd
>[   25.104062] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 0000000011bbf4cd
>[   25.104073] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000a30b7aef state to 0000000011bbf4cd
>[   25.104082] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:63:pipe C] to 0000000011bbf4cd
>[   25.104092] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 0000000011bbf4cd
>[   25.104101] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 0000000056f39e5f to [NOCRTC]
>[   25.104110] [drm:drm_atomic_set_crtc_for_plane [drm]] Link [PLANE:28:primary A] state 0000000004f21ca8 to [NOCRTC]
>[   25.104121] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:28:primary A] state 0000000004f21ca8
>[   25.104130] [drm:drm_atomic_check_only [drm]] checking 0000000011bbf4cd
>[   25.104141] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] mode changed
>[   25.104145] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] enable changed
>[   25.104150] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] active changed
>[   25.104155] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[   25.104160] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:65:eDP-1]
>[   25.104165] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] needs all connectors, enable: n, active: n
>[   25.104175] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 0000000011bbf4cd
>[   25.104185] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:39:pipe A] to 0000000011bbf4cd
>[   25.104212] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb -1
>[   25.104235] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 0, off 1, on 0, ms 1
>[   25.104247] [drm:drm_atomic_commit [drm]] committing 0000000011bbf4cd
>[   25.104286] [drm:intel_edp_backlight_off [i915]] 
>[   25.310452] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[   25.310503] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   25.323093] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[   25.323144] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
>[   25.323363] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
>[   25.323404] [drm:edp_panel_off [i915]] Wait for panel power off time
>[   25.323449] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status 80000008 control 00000000
>[   25.375742] [drm:wait_panel_status [i915]] Wait complete
>[   25.375788] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
>[   25.375829] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 1350 (active 1, on? 1) for crtc 39
>[   25.375867] [drm:intel_disable_shared_dpll [i915]] disabling LCPLL 1350
>[   25.375912] [drm:intel_atomic_commit_tail [i915]] [ENCODER:64:DDI A]
>[   25.375950] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:DDI B]
>[   25.375988] [drm:intel_atomic_commit_tail [i915]] [ENCODER:80:DDI C]
>[   25.376026] [drm:intel_atomic_commit_tail [i915]] [ENCODER:82:DP-MST A]
>[   25.376065] [drm:intel_atomic_commit_tail [i915]] [ENCODER:83:DP-MST B]
>[   25.376103] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DP-MST C]
>[   25.376141] [drm:ilk_hpd_irq_handler [i915]] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010, long 0x00000010
>[   25.376178] [drm:verify_connector_state.isra.108 [i915]] [CONNECTOR:65:eDP-1]
>[   25.376216] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[   25.376254] [drm:verify_single_dpll_state.isra.109 [i915]] WRPLL 1
>[   25.376293] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
>[   25.376332] [drm:verify_single_dpll_state.isra.109 [i915]] WRPLL 2
>[   25.376372] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[   25.376409] [drm:verify_single_dpll_state.isra.109 [i915]] SPLL
>[   25.376445] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 810
>[   25.376482] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 1350
>[   25.376519] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 2700
>[   25.376564] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A]
>[   25.376741] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000011bbf4cd
>[   25.376760] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000011bbf4cd
>[   25.700606] nouveau 0000:02:00.0: DRM: resuming object tree...
>[   25.856139] nouveau 0000:02:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
>[   25.877381] nouveau 0000:02:00.0: DRM: resuming fence...
>[   25.877444] nouveau 0000:02:00.0: DRM: evicting buffers...
>[   25.877446] nouveau 0000:02:00.0: DRM: waiting for kernel channels to go idle...
>[   25.877465] nouveau 0000:02:00.0: DRM: suspending fence...
>[   25.882871] nouveau 0000:02:00.0: DRM: suspending object tree...
>[   26.241350] [drm:intel_power_well_disable [i915]] disabling display
>[   26.241372] [drm:intel_power_well_disable [i915]] disabling always-on
>[   26.241393] [drm:hsw_enable_pc8 [i915]] Enabling package C8+
>[   26.241459] [drm:sandybridge_pcode_write_timeout [i915]] warning: pcode (write of 0x00000011 to mbox 11) mailbox access failed for hsw_write_dcomp [i915]: -6
>[   26.241478] [drm:hsw_write_dcomp [i915]] Failed to write to D_COMP
>[   26.257824] ACPI: EC: interrupt blocked
>[   26.259377] ACPI: Preparing to enter system sleep state S4
>[   26.259825] ACPI: EC: event blocked
>[   26.259825] ACPI: EC: EC stopped
>[   26.259826] PM: Saving platform NVS memory
>[   26.266620] Disabling non-boot CPUs ...
>[   26.281722] smpboot: CPU 1 is now offline
>[   26.305162] smpboot: CPU 2 is now offline
>[   26.321920] smpboot: CPU 3 is now offline
>[   26.351907] smpboot: CPU 4 is now offline
>[   26.371811] smpboot: CPU 5 is now offline
>[   26.391854] smpboot: CPU 6 is now offline
>[   26.411835] smpboot: CPU 7 is now offline
>[   26.413161] PM: Creating hibernation image:
>[   26.821171] PM: Need to copy 118251 pages
>[   26.821176] PM: Normal pages needed: 118251 + 1024, available pages: 1954039
>[   26.415491] PM: Restoring platform NVS memory
>[   26.418876] ACPI: EC: EC started
>[   26.419256] Enabling non-boot CPUs ...
>[   26.419325] x86: Booting SMP configuration:
>[   26.419328] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[   26.420600]  cache: parent cpu1 should not be sleeping
>[   26.420938] CPU1 is up
>[   26.420983] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[   26.422243]  cache: parent cpu2 should not be sleeping
>[   26.422600] CPU2 is up
>[   26.422644] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[   26.423920]  cache: parent cpu3 should not be sleeping
>[   26.424296] CPU3 is up
>[   26.424337] smpboot: Booting Node 0 Processor 4 APIC 0x1
>[   26.425827]  cache: parent cpu4 should not be sleeping
>[   26.426271] CPU4 is up
>[   26.426323] smpboot: Booting Node 0 Processor 5 APIC 0x3
>[   26.427606]  cache: parent cpu5 should not be sleeping
>[   26.428047] CPU5 is up
>[   26.428093] smpboot: Booting Node 0 Processor 6 APIC 0x5
>[   26.429360]  cache: parent cpu6 should not be sleeping
>[   26.429807] CPU6 is up
>[   26.429828] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[   26.430343]  cache: parent cpu7 should not be sleeping
>[   26.430556] CPU7 is up
>[   26.438958] ACPI: Waking up from system sleep state S4
>[   26.439826] ACPI: EC: interrupt unblocked
>[   26.456790] [drm:hsw_disable_pc8 [i915]] Disabling package C8+
>[   26.456852] [drm:intel_power_well_enable [i915]] enabling always-on
>[   26.456887] [drm:intel_power_well_enable [i915]] enabling display
>[   26.486493] usb usb2: root hub lost power or was reset
>[   26.486495] usb usb1: root hub lost power or was reset
>[   26.486496] usb usb3: root hub lost power or was reset
>[   26.486519] usb usb4: root hub lost power or was reset
>[   26.486569] ACPI: EC: event unblocked
>[   26.486580] nouveau 0000:02:00.0: DRM: resuming object tree...
>[   26.486804] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x186906
>[   26.488840] [drm:sandybridge_pcode_read [i915]] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave [i915]: -6
>[   26.489051] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 540000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0
>[   26.489122] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled
>[   26.489155] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe B] hw state readout: disabled
>[   26.489189] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:63:pipe C] hw state readout: disabled
>[   26.489221] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:28:primary A] hw state readout: enabled, pipe A
>[   26.489251] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:sprite A] hw state readout: disabled, pipe A
>[   26.489281] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:36:cursor A] hw state readout: disabled, pipe A
>[   26.489310] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:primary B] hw state readout: disabled, pipe B
>[   26.489340] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:sprite B] hw state readout: disabled, pipe B
>[   26.489373] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:48:cursor B] hw state readout: disabled, pipe B
>[   26.489401] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:primary C] hw state readout: disabled, pipe C
>[   26.489432] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:sprite C] hw state readout: disabled, pipe C
>[   26.489463] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:cursor C] hw state readout: disabled, pipe C
>[   26.489493] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   26.489526] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   26.489557] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[   26.489586] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[   26.489615] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1
>[   26.489643] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[   26.489682] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:64:DDI A] hw state readout: enabled, pipe A
>[   26.489712] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:73:DDI B] hw state readout: disabled, pipe A
>[   26.489742] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:80:DDI C] hw state readout: disabled, pipe A
>[   26.489781] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:82:DP-MST A] hw state readout: disabled, pipe A
>[   26.489810] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:83:DP-MST B] hw state readout: disabled, pipe B
>[   26.489840] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:84:DP-MST C] hw state readout: disabled, pipe C
>[   26.489873] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:65:eDP-1] hw state readout: enabled
>[   26.489907] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:74:HDMI-A-1] hw state readout: disabled
>[   26.489939] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:81:DP-1] hw state readout: disabled
>[   26.489967] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:87:HDMI-A-2] hw state readout: disabled
>[   26.489989] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 00000000c8b16918
>[   26.490025] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state]
>[   26.490055] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[   26.490083] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[   26.490111] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
>[   26.490141] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64
>[   26.490170] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   26.490198] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   26.490211] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 140999 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9
>[   26.490241] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   26.490255] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 140999 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9
>[   26.490285] [drm:intel_dump_pipe_config [i915]] crtc timings: 140999 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x40 flags: 0x9
>[   26.490314] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 140999
>[   26.490343] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   26.490371] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   26.490400] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   26.490401] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[   26.490429] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   26.490430] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[   26.490458] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = -1
>[   26.490487] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = -1
>[   26.490516] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = -1
>[   26.490545] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe B][setup_hw_state]
>[   26.490573] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[   26.490601] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[   26.490630] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[   26.490660] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   26.490688] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   26.490701] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   26.490730] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   26.490743] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   26.490773] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   26.490802] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   26.490830] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   26.490859] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   26.490888] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   26.490924] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   26.490948] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = -1
>[   26.490972] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite B] disabled, scaler_id = -1
>[   26.490998] [drm:intel_dump_pipe_config [i915]] [PLANE:48:cursor B] disabled, scaler_id = -1
>[   26.491025] [drm:intel_dump_pipe_config [i915]] [CRTC:63:pipe C][setup_hw_state]
>[   26.491055] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[   26.491082] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[   26.491109] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[   26.491135] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   26.491162] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   26.491174] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   26.491201] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   26.491212] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   26.491240] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   26.491267] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   26.491294] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   26.491321] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   26.491348] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   26.491374] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   26.491401] [drm:intel_dump_pipe_config [i915]] [PLANE:52:primary C] disabled, scaler_id = -1
>[   26.491429] [drm:intel_dump_pipe_config [i915]] [PLANE:55:sprite C] disabled, scaler_id = -1
>[   26.491457] [drm:intel_dump_pipe_config [i915]] [PLANE:60:cursor C] disabled, scaler_id = -1
>[   26.491458] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
>[   26.491485] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[   26.491512] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[   26.491532] [drm:drm_atomic_check_only [drm]] checking 00000000a7533750
>[   26.491545] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[   26.491551] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[   26.491558] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:74:HDMI-A-1]
>[   26.491564] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:74:HDMI-A-1]
>[   26.491570] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:81:DP-1]
>[   26.491575] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:81:DP-1]
>[   26.491581] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:87:HDMI-A-2]
>[   26.491586] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:87:HDMI-A-2]
>[   26.491592] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] needs all connectors, enable: y, active: y
>[   26.491605] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000a7533750
>[   26.491617] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:39:pipe A] to 00000000a7533750
>[   26.491623] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe B] needs all connectors, enable: n, active: n
>[   26.491635] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000a7533750
>[   26.491647] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe B] to 00000000a7533750
>[   26.491653] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:63:pipe C] needs all connectors, enable: n, active: n
>[   26.491665] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000a7533750
>[   26.491677] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:63:pipe C] to 00000000a7533750
>[   26.491706] [drm:intel_atomic_check [i915]] [CONNECTOR:65:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 36, max platform bpp 36
>[   26.491735] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 18 pixel clock 141000KHz
>[   26.491761] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 18
>[   26.491788] [drm:intel_dp_compute_config [i915]] DP link rate required 317250 available 540000
>[   26.491816] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1
>[   26.491846] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][fastset]
>[   26.491872] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[   26.491899] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[   26.491926] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[   26.491953] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64
>[   26.491980] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   26.492007] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   26.492019] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[   26.492046] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   26.492057] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
>[   26.492085] [drm:intel_dump_pipe_config [i915]] crtc timings: 141000 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x48 flags: 0x9
>[   26.492113] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 141000
>[   26.492140] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   26.492167] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   26.492193] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   26.492220] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   26.492248] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = -1
>[   26.492275] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = -1
>[   26.492302] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = -1
>[   26.492334] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[   26.492362] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[   26.492377] [drm:drm_atomic_commit [drm]] committing 00000000a7533750
>[   26.492420] [drm:intel_atomic_commit_tail [i915]] [ENCODER:64:DDI A]
>[   26.492447] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:DDI B]
>[   26.492475] [drm:intel_atomic_commit_tail [i915]] [ENCODER:80:DDI C]
>[   26.492502] [drm:intel_atomic_commit_tail [i915]] [ENCODER:82:DP-MST A]
>[   26.492528] [drm:intel_atomic_commit_tail [i915]] [ENCODER:83:DP-MST B]
>[   26.492554] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DP-MST C]
>[   26.492581] [drm:verify_connector_state.isra.108 [i915]] [CONNECTOR:74:HDMI-A-1]
>[   26.492608] [drm:verify_connector_state.isra.108 [i915]] [CONNECTOR:81:DP-1]
>[   26.492636] [drm:verify_connector_state.isra.108 [i915]] [CONNECTOR:87:HDMI-A-2]
>[   26.492662] [drm:verify_single_dpll_state.isra.109 [i915]] WRPLL 1
>[   26.492689] [drm:verify_single_dpll_state.isra.109 [i915]] WRPLL 2
>[   26.492718] [drm:verify_single_dpll_state.isra.109 [i915]] SPLL
>[   26.492748] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 810
>[   26.492774] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 1350
>[   26.492801] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 2700
>[   26.492832] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[   26.492858] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[   26.494464] sd 0:0:0:0: [sda] Starting disk
>[   26.498608] [drm:verify_connector_state.isra.108 [i915]] [CONNECTOR:65:eDP-1]
>[   26.498647] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A]
>[   26.498694] [drm:verify_single_dpll_state.isra.109 [i915]] LCPLL 1350
>[   26.498731] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe B]
>[   26.498769] [drm:intel_atomic_commit_tail [i915]] [CRTC:63:pipe C]
>[   26.498827] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[   26.498865] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
>[   26.498884] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a7533750
>[   26.498908] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a7533750
>[   26.498959] [drm:intel_opregion_resume [i915]] 4 outputs detected
>[   26.499003] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1]
>[   26.499043] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000
>[   26.499077] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   26.499111] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   26.499149] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[   26.499195] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[   26.499347] [drm:intel_power_well_disable [i915]] disabling display
>[   26.499397] [drm:intel_power_well_enable [i915]] enabling display
>[   26.499598] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID  HW-rev 0.1 SW-rev 6.7 quirks 0x0000
>[   26.499642] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[   26.500156] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000d0b617d1
>[   26.500173] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000faa5387b state to 00000000d0b617d1
>[   26.500190] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000b31f8742 state to 00000000d0b617d1
>[   26.500205] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000359da15b state to 00000000d0b617d1
>[   26.500219] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 00000000359da15b
>[   26.500235] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000bf1ce7ac state to 00000000d0b617d1
>[   26.500248] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000bf1ce7ac
>[   26.500264] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 00000000cf13bd0f state to 00000000d0b617d1
>[   26.500279] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 000000000c1f45c3 state to 00000000d0b617d1
>[   26.500292] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 000000000c1f45c3
>[   26.500308] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 0000000022946f99 state to 00000000d0b617d1
>[   26.500321] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 0000000022946f99
>[   26.500336] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000cd5111be state to 00000000d0b617d1
>[   26.500351] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 00000000fbdada8d state to 00000000d0b617d1
>[   26.500364] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 00000000fbdada8d
>[   26.500379] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 000000000279d99c state to 00000000d0b617d1
>[   26.500392] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 000000000279d99c
>[   26.500407] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1920x1080] for [CRTC:39:pipe A] state 00000000b31f8742
>[   26.500418] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:65:eDP-1] status updated from connected to connected
>[   26.500428] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:91] for [PLANE:28:primary A] state 00000000faa5387b
>[   26.500462] [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
>[   26.500663] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   26.500698] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   26.500897] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   26.500917] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   26.500952] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   26.500984] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   26.502031] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[   26.502067] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   26.502284] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   26.502316] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   26.502530] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   26.502538] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   26.502546] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:74:HDMI-A-1] status updated from disconnected to disconnected
>[   26.502558] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000d0b617d1
>[   26.502569] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000004d64bf54 state to 00000000d0b617d1
>[   26.502579] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000004d64bf54 to [NOCRTC]
>[   26.502589] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000004d64bf54 to [CRTC:39:pipe A]
>[   26.502600] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 00000000def0bbfc state to 00000000d0b617d1
>[   26.502609] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 00000000def0bbfc
>[   26.502618] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 00000000cf13bd0f
>[   26.502629] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000d0b617d1
>[   26.502640] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000ad1c249f state to 00000000d0b617d1
>[   26.502649] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 00000000ad1c249f
>[   26.502658] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 00000000cd5111be
>[   26.502668] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000d0b617d1
>[   26.502679] [drm:drm_atomic_check_only [drm]] checking 00000000d0b617d1
>[   26.502688] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
>[   26.502694] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A]
>[   26.502723] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 91
>[   26.502749] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0
>[   26.502763] [drm:drm_atomic_commit [drm]] committing 00000000d0b617d1
>[   26.515248] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000d0b617d1
>[   26.515260] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000d0b617d1
>[   26.515299] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-1]
>[   26.515308] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:81:DP-1] status updated from disconnected to disconnected
>[   26.515338] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
>[   26.515532] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   26.515561] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   26.515751] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   26.515763] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   26.515792] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   26.515821] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   26.516569] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   26.516597] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   26.516789] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   26.516815] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   26.517002] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   26.517009] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   26.517015] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:87:HDMI-A-2] status updated from disconnected to disconnected
>[   26.566500] ACPI: button: The lid device is not compliant to SW_LID.
>[   26.623676] nouveau 0000:02:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
>[   26.644938] nouveau 0000:02:00.0: DRM: resuming fence...
>[   26.800613] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[   26.801660] ata1.00: NCQ Send/Recv Log not supported
>[   26.802120] ata1.00: NCQ Send/Recv Log not supported
>[   26.802125] ata1.00: configured for UDMA/133
>[   26.812380] ata1.00: Enabling discard_zeroes_data
>[   26.823271] usb 2-11: reset high-speed USB device number 4 using xhci_hcd
>[   26.836490] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[   26.839823] usb 4-1: reset high-speed USB device number 2 using ehci-pci
>[   27.086633] usb 2-9: reset full-speed USB device number 3 using xhci_hcd
>[   27.349912] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
>[   27.493234] acpi LNXPOWER:01: Turning OFF
>[   27.493288] PM: Basic memory bitmaps freed
>[   27.493293] OOM killer enabled.
>[   27.493293] Restarting tasks ... 
>[   27.493568] Probing NFC pn544
>[   27.493864] [drm:intel_power_well_disable [i915]] disabling display
>[   27.493980] done.
>[   27.506862] Bluetooth: hci0: read Intel version: 370710018002030d00
>[   27.507257] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
>[   27.562710] psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4646]
>[   27.616487] psmouse serio1: synaptics: queried min coordinates: x [1386..], y [1252..]
>[   27.679871] PM: hibernation exit
>[   27.716010] Bluetooth: hci0: Intel firmware patch completed and activated
>[   29.676648] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   29.676734] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[   32.663230] nouveau 0000:02:00.0: DRM: evicting buffers...
>[   32.663236] nouveau 0000:02:00.0: DRM: waiting for kernel channels to go idle...
>[   32.663272] nouveau 0000:02:00.0: DRM: suspending fence...
>[   32.669111] nouveau 0000:02:00.0: DRM: suspending object tree...
>
>[   40.680628] TOLGA: Trying to set backlight brightness to 1 and 2 seconds later to 400
>
>[   40.680801] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=1/4882
>[   42.682903] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=400/4882
>
>TOLGA: Blind reboot.

Actions: View

Attachments on bug 108225: 141889 | 141890 | 141891 | 141892 | 141893 | 141936 | 141937 | 141938 | 142461 | 142465 | 142472 | 142522 | 142667 | 142668

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.