Attachment 145584 Details for Bug 111853 – dmesg following modprobe nouveau running vanilla kernel 5.3.1

dmesg following modprobe nouveau running vanilla kernel 5.3.1

dmesg-stw-vanilla.txt (text/plain), 52.76 KB, created by Felix Miata on 2019-09-29 22:15:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Felix Miata

Created: 2019-09-29 22:15:49 UTC

Size: 52.76 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
>[    0.000000] Linux version 5.2.14-2.g7f85414-vanilla (geeko@buildhost) (gcc version 9.2.1 20190820 [gcc-9-branch revision 274748] (SUSE Linux)) #1 SMP Fri Sep 13 11:31:46 UTC 2019 (7f85414)
>[    0.000000] Command line: root=LABEL=root09-c520 ipv6.disable=1 net.ifnames=0 noresume mitigations=auto consoleblank=0 drm.debug=0x1e log_buf_len=1M acpi=off vga=791 video=1440x900@60 3
>[    0.000000] x86/fpu: x87 FPU will use FXSAVE
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfee2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.4 present.
>[    0.000000] DMI: Sony Corporation VGN-AR730E/VAIO, BIOS R2090J8 02/26/2008
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2094.693 MHz processor
>[    0.007491] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.007493] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.007499] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
>[    0.007506] MTRR default type: uncachable
>[    0.007507] MTRR fixed ranges enabled:
>[    0.007509]   00000-9FFFF write-back
>[    0.007510]   A0000-BFFFF uncachable
>[    0.007511]   C0000-FFFFF write-protect
>[    0.007512] MTRR variable ranges enabled:
>[    0.007514]   0 base 000000000 mask F80000000 write-back
>[    0.007515]   1 base 080000000 mask FC0000000 write-back
>[    0.007517]   2 base 0BFF00000 mask FFFF00000 uncachable
>[    0.007517]   3 disabled
>[    0.007518]   4 disabled
>[    0.007519]   5 disabled
>[    0.007520]   6 disabled
>[    0.007520]   7 disabled
>[    0.008483] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.017452] found SMP MP-table at [mem 0x000f81b0-0x000f81bf]
>[    0.023201] check: Scanning 1 areas for low memory corruption
>[    0.023209] BRK [0xa1601000, 0xa1601fff] PGTABLE
>[    0.023212] BRK [0xa1602000, 0xa1602fff] PGTABLE
>[    0.023214] BRK [0xa1603000, 0xa1603fff] PGTABLE
>[    0.023252] BRK [0xa1604000, 0xa1604fff] PGTABLE
>[    0.023254] BRK [0xa1605000, 0xa1605fff] PGTABLE
>[    0.023370] BRK [0xa1606000, 0xa1606fff] PGTABLE
>[    0.023405] BRK [0xa1607000, 0xa1607fff] PGTABLE
>[    0.023724] printk: log_buf_len: 1048576 bytes
>[    0.023726] printk: early log buf free: 258812(98%)
>[    0.023728] RAMDISK: [mem 0x37619000-0x37feffff]
>[    0.023838] No NUMA configuration found
>[    0.023840] Faking a node at [mem 0x0000000000000000-0x00000000bfecffff]
>[    0.023847] NODE_DATA(0) allocated [mem 0xbfdba000-0xbfdcffff]
>[    0.023909] Zone ranges:
>[    0.023911]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.023913]   DMA32    [mem 0x0000000001000000-0x00000000bfecffff]
>[    0.023914]   Normal   empty
>[    0.023916]   Device   empty
>[    0.023917] Movable zone start for each node
>[    0.023920] Early memory node ranges
>[    0.023921]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>[    0.023923]   node   0: [mem 0x0000000000100000-0x00000000bfecffff]
>[    0.023927] Zeroed struct page in unavailable ranges: 98 pages
>[    0.023929] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bfecffff]
>[    0.023931] On node 0 totalpages: 786030
>[    0.023933]   DMA zone: 64 pages used for memmap
>[    0.023934]   DMA zone: 21 pages reserved
>[    0.023935]   DMA zone: 3998 pages, LIFO batch:0
>[    0.024021]   DMA32 zone: 12220 pages used for memmap
>[    0.024022]   DMA32 zone: 782032 pages, LIFO batch:63
>[    0.026222] Intel MultiProcessor Specification v1.4
>[    0.026228] MPTABLE: OEM ID: INTEL   
>[    0.026229] MPTABLE: Product ID: S. Rosa CRB 
>[    0.026230] MPTABLE: APIC at: 0xFEE00000
>[    0.026233] Processor #0 (Bootup-CPU)
>[    0.026236] Processor #1
>[    0.026248] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.026251] Processors: 2
>[    0.026254] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.026281] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.026284] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.026285] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
>[    0.026286] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
>[    0.026287] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
>[    0.026289] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
>[    0.026292] [mem 0xc0000000-0xdfffffff] available for PCI devices
>[    0.026294] Booting paravirtualized kernel on bare hardware
>[    0.026300] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.187356] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
>[    0.188788] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u1048576
>[    0.188799] pcpu-alloc: s196608 r8192 d28672 u1048576 alloc=1*2097152
>[    0.188800] pcpu-alloc: [0] 0 1 
>[    0.188829] Built 1 zonelists, mobility grouping on.  Total pages: 773725
>[    0.188831] Policy zone: DMA32
>[    0.188835] Kernel command line: root=LABEL=root09-c520 ipv6.disable=1 net.ifnames=0 noresume mitigations=auto consoleblank=0 drm.debug=0x1e log_buf_len=1M acpi=off vga=791 video=1440x900@60 3
>[    0.195114] Memory: 261668K/3144120K available (12291K kernel code, 1469K rwdata, 3992K rodata, 2104K init, 13068K bss, 100228K reserved, 0K cma-reserved)
>[    0.195131] random: get_random_u64 called from kmem_cache_open+0x2e/0x3f0 with crng_init=0
>[    0.195310] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.195333] Kernel/User page tables isolation: enabled
>[    0.195371] ftrace: allocating 37955 entries in 149 pages
>[    0.215196] rcu: Hierarchical RCU implementation.
>[    0.215200] rcu: 	RCU event tracing is enabled.
>[    0.215201] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
>[    0.215203] 	Tasks RCU enabled.
>[    0.215205] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
>[    0.215206] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.219463] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
>[    0.219742] Console: colour dummy device 80x25
>[    0.219896] printk: console [tty0] enabled
>[    0.219938] APIC: Switch to symmetric I/O mode setup
>[    0.220020] ExtINT not setup in hardware but reported by MP table
>[    0.220393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.239941] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e319b31e05, max_idle_ns: 440795203240 ns
>[    0.239950] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.38 BogoMIPS (lpj=8378772)
>[    0.239956] pid_max: default: 32768 minimum: 301
>[    0.239996] LSM: Security Framework initializing
>[    0.240037] AppArmor: AppArmor initialized
>[    0.241814] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.242991] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.243057] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.243097] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.243509] mce: CPU0: Thermal monitoring enabled (TM2)
>[    0.243516] process: using mwait in idle threads
>[    0.243523] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.243526] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>[    0.243530] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>[    0.243535] Spectre V2 : Mitigation: Full generic retpoline
>[    0.243537] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>[    0.243541] Speculative Store Bypass: Vulnerable
>[    0.243550] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
>[    0.243737] Freeing SMP alternatives memory: 36K
>[    0.462336] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0x6)
>[    0.462547] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
>[    0.462562] ... version:                2
>[    0.462565] ... bit width:              40
>[    0.462567] ... generic registers:      2
>[    0.462570] ... value mask:             000000ffffffffff
>[    0.462573] ... max period:             000000007fffffff
>[    0.462575] ... fixed-purpose events:   3
>[    0.462578] ... event mask:             0000000700000003
>[    0.462650] rcu: Hierarchical SRCU implementation.
>[    0.463491] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.463543] smp: Bringing up secondary CPUs ...
>[    0.463709] x86: Booting SMP configuration:
>[    0.463713] .... node  #0, CPUs:      #1
>[    0.465998] smp: Brought up 1 node, 2 CPUs
>[    0.465998] smpboot: Max logical packages: 1
>[    0.465998] smpboot: Total of 2 processors activated (8378.77 BogoMIPS)
>[    0.472004] node 0 initialised, 695556 pages in 4ms
>[    0.472311] devtmpfs: initialized
>[    0.472311] x86/mm: Memory block size: 128MB
>[    0.472727] PM: Registering ACPI NVS region [mem 0xbfed0000-0xbfee2fff] (77824 bytes)
>[    0.472727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.472727] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.472727] pinctrl core: initialized pinctrl subsystem
>[    0.472727] PM: RTC time: 08:21:22, date: 2019-09-15
>[    0.472727] NET: Registered protocol family 16
>[    0.472727] audit: initializing netlink subsys (disabled)
>[    0.472727] audit: type=2000 audit(1568535682.252:1): state=initialized audit_enabled=0 res=1
>[    0.472727] cpuidle: using governor ladder
>[    0.472727] cpuidle: using governor menu
>[    0.475957] PCI: Using configuration type 1 for base access
>[    0.477950] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.480024] ACPI: Interpreter disabled.
>[    0.480100] vgaarb: loaded
>[    0.480100] SCSI subsystem initialized
>[    0.480119] libata version 3.00 loaded.
>[    0.480119] EDAC MC: Ver: 3.0.0
>[    0.480119] PCI: Probing PCI hardware
>[    0.480119] PCI: root bus 00: using default resources
>[    0.480119] PCI: Probing PCI hardware (bus 00)
>[    0.480119] PCI host bridge to bus 0000:00
>[    0.480119] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.480119] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
>[    0.480119] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
>[    0.480119] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
>[    0.480146] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
>[    0.480198] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.480309] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>[    0.480377] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
>[    0.480460] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
>[    0.480532] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
>[    0.480631] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>[    0.480671] pci 0000:00:1a.7: reg 0x10: [mem 0xfc304800-0xfc304bff]
>[    0.480794] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.480872] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
>[    0.480904] pci 0000:00:1b.0: reg 0x10: [mem 0xfc300000-0xfc303fff 64bit]
>[    0.481016] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.481101] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>[    0.481234] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.481322] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
>[    0.481455] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.481546] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
>[    0.481685] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.484022] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>[    0.484092] pci 0000:00:1d.0: reg 0x20: [io  0x1840-0x185f]
>[    0.484183] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>[    0.484257] pci 0000:00:1d.1: reg 0x20: [io  0x1860-0x187f]
>[    0.484341] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
>[    0.484410] pci 0000:00:1d.2: reg 0x20: [io  0x1880-0x189f]
>[    0.484506] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>[    0.484543] pci 0000:00:1d.7: reg 0x10: [mem 0xfc304c00-0xfc304fff]
>[    0.484663] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.484740] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.484898] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
>[    0.485031] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>[    0.485042] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>[    0.485052] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>[    0.485160] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
>[    0.485186] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
>[    0.485203] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
>[    0.485218] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
>[    0.485233] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
>[    0.485249] pci 0000:00:1f.1: reg 0x20: [io  0x18a0-0x18af]
>[    0.485279] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>[    0.485283] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>[    0.485287] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>[    0.485292] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>[    0.485358] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
>[    0.485389] pci 0000:00:1f.2: reg 0x10: [io  0x18f0-0x18f7]
>[    0.485405] pci 0000:00:1f.2: reg 0x14: [io  0x18e8-0x18eb]
>[    0.485418] pci 0000:00:1f.2: reg 0x18: [io  0x18e0-0x18e7]
>[    0.485432] pci 0000:00:1f.2: reg 0x1c: [io  0x18b4-0x18b7]
>[    0.485446] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18df]
>[    0.485463] pci 0000:00:1f.2: reg 0x24: [mem 0xfc304000-0xfc3047ff]
>[    0.485528] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.485609] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
>[    0.485638] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
>[    0.485685] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
>[    0.485849] pci 0000:01:00.0: [10de:0426] type 00 class 0x030000
>[    0.485900] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
>[    0.485945] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.485990] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
>[    0.486012] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
>[    0.486037] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[    0.486065] pci 0000:01:00.0: enabling Extended Tags
>[    0.486320] pci 0000:01:00.0: vgaarb: setting as boot VGA device
>[    0.486325] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.486385] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.486390] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>[    0.486396] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
>[    0.486402] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.486502] pci 0000:02:00.0: [11ab:4363] type 00 class 0x020000
>[    0.486547] pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf6003fff 64bit]
>[    0.486569] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x30ff]
>[    0.486640] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[    0.486746] pci 0000:02:00.0: supports D1 D2
>[    0.486750] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.486876] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>[    0.486884] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.486891] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
>[    0.486903] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.486972] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
>[    0.486979] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.486986] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
>[    0.486996] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
>[    0.487111] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000
>[    0.487186] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa001fff 64bit]
>[    0.487408] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>[    0.487608] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
>[    0.487618] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
>[    0.487625] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
>[    0.487638] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
>[    0.487666] pci_bus 0000:08: extended config space not accessible
>[    0.487713] pci 0000:08:03.0: [104c:8039] type 02 class 0x060700
>[    0.487741] pci 0000:08:03.0: reg 0x10: [mem 0xfc004000-0xfc004fff]
>[    0.487786] pci 0000:08:03.0: supports D1 D2
>[    0.487790] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.487865] pci 0000:08:03.1: [104c:803a] type 00 class 0x0c0010
>[    0.487900] pci 0000:08:03.1: reg 0x10: [mem 0xfc006000-0xfc0067ff]
>[    0.487918] pci 0000:08:03.1: reg 0x14: [mem 0xfc000000-0xfc003fff]
>[    0.488087] pci 0000:08:03.1: supports D1 D2
>[    0.488092] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.488196] pci 0000:08:03.2: [104c:803b] type 00 class 0x018000
>[    0.488225] pci 0000:08:03.2: reg 0x10: [mem 0xfc005000-0xfc005fff]
>[    0.488334] pci 0000:08:03.2: supports D1 D2
>[    0.488338] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot
>[    0.488465] pci 0000:00:1e.0: PCI bridge to [bus 08-09] (subtractive decode)
>[    0.488473] pci 0000:00:1e.0:   bridge window [io  0xf000-0xffff]
>[    0.488480] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
>[    0.488490] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>[    0.488495] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
>[    0.488537] pci_bus 0000:09: extended config space not accessible
>[    0.488564] pci_bus 0000:09: busn_res: [bus 09] end can not be updated to 0c
>[    0.488575] pci 0000:00:1e.0: bridge has subordinate 09 but max busn 0c
>[    0.488613] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
>[    0.488703] PCI: pci_cache_line_size set to 64 bytes
>[    0.488843] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>[    0.488845] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
>[    0.488993] NetLabel: Initializing
>[    0.488993] NetLabel:  domain hash size = 128
>[    0.488993] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.488993] NetLabel:  unlabeled traffic allowed by default
>[    0.488997] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.488997] hpet clockevent registered
>[    0.488997] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.488997] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.488997] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.488997] clocksource: Switched to clocksource tsc-early
>[    0.509991] VFS: Disk quotas dquot_6.6.0
>[    0.510026] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.510208] AppArmor: AppArmor Filesystem Enabled
>[    0.510237] pnp: PnP ACPI: disabled
>[    0.512443] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
>[    0.512455] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
>[    0.512460] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
>[    0.512465] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.512470] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>[    0.512476] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
>[    0.512482] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.512490] pci 0000:02:00.0: BAR 6: assigned [mem 0xf6020000-0xf603ffff pref]
>[    0.512496] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>[    0.512501] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.512511] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
>[    0.512518] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.512530] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
>[    0.512536] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.512543] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
>[    0.512550] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
>[    0.512561] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
>[    0.512566] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
>[    0.512574] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
>[    0.512581] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
>[    0.512597] pci 0000:08:03.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
>[    0.512603] pci 0000:08:03.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
>[    0.512607] pci 0000:08:03.0: BAR 13: assigned [io  0xf000-0xf0ff]
>[    0.512612] pci 0000:08:03.0: BAR 14: assigned [io  0xf400-0xf4ff]
>[    0.512617] pci 0000:08:03.0: CardBus bridge to [bus 09]
>[    0.512621] pci 0000:08:03.0:   bridge window [io  0xf000-0xf0ff]
>[    0.512628] pci 0000:08:03.0:   bridge window [io  0xf400-0xf4ff]
>[    0.512637] pci 0000:08:03.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
>[    0.512647] pci 0000:08:03.0:   bridge window [mem 0xc8000000-0xcbffffff]
>[    0.512655] pci 0000:00:1e.0: PCI bridge to [bus 08-09]
>[    0.512660] pci 0000:00:1e.0:   bridge window [io  0xf000-0xffff]
>[    0.512668] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
>[    0.512681] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.512685] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
>[    0.512689] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>[    0.512693] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
>[    0.512698] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.512703] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>[    0.512706] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
>[    0.512711] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.512715] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
>[    0.512719] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
>[    0.512724] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
>[    0.512728] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
>[    0.512732] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
>[    0.512736] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
>[    0.512741] pci_bus 0000:08: resource 0 [io  0xf000-0xffff]
>[    0.512745] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff]
>[    0.512749] pci_bus 0000:08: resource 4 [io  0x0000-0xffff]
>[    0.512753] pci_bus 0000:08: resource 5 [mem 0x00000000-0xfffffffff]
>[    0.512757] pci_bus 0000:09: resource 0 [io  0xf000-0xf0ff]
>[    0.512761] pci_bus 0000:09: resource 1 [io  0xf400-0xf4ff]
>[    0.512765] pci_bus 0000:09: resource 2 [mem 0xc4000000-0xc7ffffff pref]
>[    0.512769] pci_bus 0000:09: resource 3 [mem 0xc8000000-0xcbffffff]
>[    0.512812] NET: Registered protocol family 2
>[    0.513023] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
>[    0.513059] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.513206] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.513445] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.513525] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.513562] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.513707] NET: Registered protocol family 1
>[    0.513720] NET: Registered protocol family 44
>[    0.513750] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
>[    0.513787] pci 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
>[    0.513825] pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
>[    0.535033] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x645 took 20711 usecs
>[    0.535074] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
>[    0.535116] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
>[    0.535157] pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
>[    0.535199] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
>[    2.535960] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>[    2.535980] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x645 took 1953897 usecs
>[    2.536048] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    2.536105] PCI: CLS 64 bytes, default 64
>[    2.536161] Trying to unpack rootfs image as initramfs...
>[    3.922681] Freeing initrd memory: 10076K
>[    3.922941] platform rtc_cmos: registered platform RTC device (no PNP device found)
>[    3.923022] check: Scanning for low memory corruption every 60 seconds
>[    3.923878] Initialise system trusted keyrings
>[    3.923897] Key type blacklist registered
>[    3.924029] workingset: timestamp_bits=37 max_order=20 bucket_order=0
>[    3.926257] zbud: loaded
>[    3.927069] Platform Keyring initialized
>[    3.929981] Key type asymmetric registered
>[    3.929989] Asymmetric key parser 'x509' registered
>[    3.930009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    3.930075] io scheduler mq-deadline registered
>[    3.930079] io scheduler kyber registered
>[    3.930161] io scheduler bfq registered
>[    3.930316] pcieport 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16
>[    3.930405] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
>[    3.930454] pcieport 0000:00:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep-
>[    3.930585] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
>[    3.930689] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
>[    3.930739] pcieport 0000:00:1c.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
>[    3.930902] pcieport 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16
>[    3.931006] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
>[    3.931058] pcieport 0000:00:1c.1: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
>[    3.931224] pcieport 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 18
>[    3.931320] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
>[    3.931370] pcieport 0000:00:1c.2: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
>[    3.931543] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    3.931585] vesafb: mode is 1024x768x16, linelength=2048, pages=1
>[    3.931589] vesafb: scrolling: redraw
>[    3.931593] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>[    3.931612] vesafb: framebuffer at 0xcd000000, mapped to 0x(____ptrval____), using 3072k, total 14336k
>[    3.955767] Console: switching to colour frame buffer device 128x48
>[    3.980083] fb0: VESA VGA frame buffer device
>[    3.980304] intel_idle: does not run on family 6 model 23
>[    3.980437] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    3.982360] Non-volatile memory driver v1.3
>[    3.982586] Linux agpgart interface v0.103
>[    3.983413] ahci 0000:00:1f.2: version 3.0
>[    3.983432] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
>[    3.983879] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>[    3.984274] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
>[    3.985121] scsi host0: ahci
>[    3.985465] scsi host1: ahci
>[    3.985768] scsi host2: ahci
>[    3.986021] ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 28
>[    3.986364] ata2: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 28
>[    3.986706] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304200 irq 28
>[    3.987148] i8042: PNP: No PS/2 controller found.
>[    3.987367] i8042: Probing ports directly.
>[    3.992488] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    3.992767] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    3.993130] mousedev: PS/2 mouse device common for all mice
>[    3.993653] rtc_cmos rtc_cmos: registered as rtc0
>[    3.993907] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram, hpet irqs
>[    3.994281] intel_pstate: CPU model not supported
>[    3.994515] ledtrig-cpu: registered to indicate activity on CPUs
>[    3.994825] hidraw: raw HID events driver (C) Jiri Kosina
>[    4.004954] IPv6: Loaded, but administratively disabled, reboot required to enable
>[    4.015394] mce: Using 6 MCE banks
>[    4.025384] RAS: Correctable Errors collector initialized.
>[    4.035389] microcode: sig=0x10676, pf=0x80, revision=0x60f
>[    4.045387] microcode: Microcode Update Driver: v2.2.
>[    4.045404] sched_clock: Marking stable (4045080495, 277174)->(4083204786, -37847117)
>[    4.045412] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    4.075665] registered taskstats version 1
>[    4.085645] Loading compiled-in X.509 certificates
>[    4.095698] zswap: loaded using pool lzo/zbud
>[    4.105760] page_owner is disabled
>[    4.128747] Key type big_key registered
>[    4.144742] Key type encrypted registered
>[    4.154279] AppArmor: AppArmor sha1 policy hashing enabled
>[    4.163885] ima: No TPM chip found, activating TPM-bypass!
>[    4.173516] ima: Allocated hash algorithm: sha256
>[    4.182997] No architecture policies found
>[    4.192348] evm: Initialising EVM extended attributes:
>[    4.201608] evm: security.selinux
>[    4.210721] evm: security.apparmor
>[    4.219719] evm: security.ima
>[    4.228610] evm: security.capability
>[    4.237341] evm: HMAC attrs: 0x1
>[    4.246288] PM:   Magic number: 3:814:371
>[    4.254808] rtc_cmos rtc_cmos: setting system clock to 2019-09-15T08:21:26 UTC (1568535686)
>[    4.305114] ata2: SATA link down (SStatus 0 SControl 300)
>[    4.313807] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    4.322455] ata3: SATA link down (SStatus 0 SControl 300)
>[    4.333306] ata1.00: ATA-9: CT120BX500SSD1,  M6CR013, max UDMA/133
>[    4.341947] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
>[    4.359472] ata1.00: configured for UDMA/133
>[    4.368254] scsi 0:0:0:0: Direct-Access     ATA      CT120BX500SSD1   R013 PQ: 0 ANSI: 5
>[    4.377216] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
>[    4.386181] sd 0:0:0:0: [sda] Write Protect is off
>[    4.395208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.395229] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.406065]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
>[    4.416241] sd 0:0:0:0: [sda] Attached SCSI disk
>[    4.427872] Freeing unused decrypted memory: 2040K
>[    4.438611] Freeing unused kernel image memory: 2104K
>[    4.448136] Write protecting the kernel read-only data: 18432k
>[    4.459212] Freeing unused kernel image memory: 2012K
>[    4.469018] Freeing unused kernel image memory: 104K
>[    4.478546] Run /init as init process
>[    4.501882] systemd[1]: systemd +suse.135.g0f9271c133 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    4.552022] systemd[1]: Detected architecture x86-64.
>[    4.562228] systemd[1]: Running in initial RAM disk.
>[    4.604586] systemd[1]: Set hostname to <vaio>.
>[    4.691786] random: systemd: uninitialized urandom read (16 bytes read)
>[    4.702132] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>[    4.722942] random: systemd: uninitialized urandom read (16 bytes read)
>[    4.733267] systemd[1]: Reached target Paths.
>[    4.754167] random: systemd: uninitialized urandom read (16 bytes read)
>[    4.764749] systemd[1]: Reached target Timers.
>[    4.786205] systemd[1]: Reached target Swap.
>[    4.807588] systemd[1]: Reached target Local File Systems.
>[    4.829378] systemd[1]: Listening on udev Kernel Socket.
>[    4.881770] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x204000/0x0/0x0, board id: 0, fw id: 318083
>[    4.923971] tsc: Refined TSC clocksource calibration: 2094.749 MHz
>[    4.923976] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e31d02b3dd, max_idle_ns: 440795254494 ns
>[    4.923990] clocksource: Switched to clocksource tsc
>[    4.930214] alua: device handler registered
>[    4.930515] emc: device handler registered
>[    4.930839] rdac: device handler registered
>[    4.931093] dm_multipath: Unknown symbol dm_table_run_md_queue_async (err -2)
>[    4.931098] dm_multipath: Unknown symbol dm_noflush_suspending (err -2)
>[    4.931100] dm_multipath: Unknown symbol dm_per_bio_data (err -2)
>[    4.931102] dm_multipath: Unknown symbol dm_put_device (err -2)
>[    4.931118] dm_multipath: Unknown symbol dm_device_name (err -2)
>[    4.931124] dm_multipath: Unknown symbol dm_mq_kick_requeue_list (err -2)
>[    4.931136] dm_multipath: Unknown symbol dm_suspended (err -2)
>[    4.931138] dm_multipath: Unknown symbol dm_read_arg (err -2)
>[    4.931147] dm_multipath: Unknown symbol dm_shift_arg (err -2)
>[    4.931153] dm_multipath: Unknown symbol dm_unregister_target (err -2)
>[    4.931165] dm_multipath: Unknown symbol dm_table_event (err -2)
>[    4.931167] dm_multipath: Unknown symbol dm_read_arg_group (err -2)
>[    4.931177] dm_multipath: Unknown symbol dm_register_target (err -2)
>[    4.931185] dm_multipath: Unknown symbol dm_table_get_mode (err -2)
>[    4.931188] dm_multipath: Unknown symbol dm_table_get_md (err -2)
>[    4.931191] dm_multipath: Unknown symbol dm_path_uevent (err -2)
>[    4.931194] dm_multipath: Unknown symbol dm_get_device (err -2)
>[    4.931196] dm_multipath: Unknown symbol dm_table_set_type (err -2)
>[    4.931200] dm_multipath: Unknown symbol dm_consume_args (err -2)
>[    4.934583] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>[    4.993213] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    5.757252] random: crng init done
>[    5.757255] random: 7 urandom warning(s) missed due to ratelimiting
>[    6.595251] usbcore: registered new interface driver usbfs
>[    6.595264] usbcore: registered new interface driver hub
>[    6.595300] usbcore: registered new device driver usb
>[    6.596835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    6.598420] ehci-pci: EHCI PCI platform driver
>[    6.598466] ehci-pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
>[    6.598527] ehci-pci 0000:00:1a.7: EHCI Host Controller
>[    6.598535] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    6.598553] ehci-pci 0000:00:1a.7: debug port 1
>[    6.602486] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
>[    6.602504] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc304800
>[    6.603764] uhci_hcd: USB Universal Host Controller Interface driver
>[    6.603809] uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
>[    6.616288] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    6.616783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
>[    6.616785] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.616787] usb usb1: Product: EHCI Host Controller
>[    6.616789] usb usb1: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla ehci_hcd
>[    6.616790] usb usb1: SerialNumber: 0000:00:1a.7
>[    6.616944] hub 1-0:1.0: USB hub found
>[    6.616954] hub 1-0:1.0: 4 ports detected
>[    6.617241] yenta_cardbus 0000:08:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16
>[    6.617265] yenta_cardbus 0000:08:03.0: CardBus bridge found [104d:9016]
>[    6.617290] yenta_cardbus 0000:08:03.0: Enabling burst memory read transactions
>[    6.617299] yenta_cardbus 0000:08:03.0: Using CSCINT to route CSC interrupts to PCI
>[    6.617301] yenta_cardbus 0000:08:03.0: Routing CardBus interrupts to PCI
>[    6.617310] yenta_cardbus 0000:08:03.0: TI: mfunc 0x011b1b22, devctl 0x64
>[    6.620522] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    6.620530] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
>[    6.620541] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    6.620579] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>[    6.620659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
>[    6.620661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.620663] usb usb2: Product: UHCI Host Controller
>[    6.620664] usb usb2: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla uhci_hcd
>[    6.620666] usb usb2: SerialNumber: 0000:00:1a.0
>[    6.620809] hub 2-0:1.0: USB hub found
>[    6.620820] hub 2-0:1.0: 2 ports detected
>[    6.620984] uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
>[    6.621003] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    6.621008] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
>[    6.621017] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    6.621059] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>[    6.621136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
>[    6.621138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.621140] usb usb3: Product: UHCI Host Controller
>[    6.621142] usb usb3: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla uhci_hcd
>[    6.621143] usb usb3: SerialNumber: 0000:00:1a.1
>[    6.621278] hub 3-0:1.0: USB hub found
>[    6.621288] hub 3-0:1.0: 2 ports detected
>[    6.621449] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
>[    6.621468] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    6.621474] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    6.621484] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    6.621525] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
>[    6.621597] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
>[    6.621599] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.621600] usb usb4: Product: UHCI Host Controller
>[    6.621602] usb usb4: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla uhci_hcd
>[    6.621603] usb usb4: SerialNumber: 0000:00:1d.0
>[    6.621728] hub 4-0:1.0: USB hub found
>[    6.621738] hub 4-0:1.0: 2 ports detected
>[    6.621900] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
>[    6.621917] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    6.621923] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>[    6.621932] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    6.621969] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
>[    6.622038] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
>[    6.622040] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.622042] usb usb5: Product: UHCI Host Controller
>[    6.622043] usb usb5: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla uhci_hcd
>[    6.622045] usb usb5: SerialNumber: 0000:00:1d.1
>[    6.622173] hub 5-0:1.0: USB hub found
>[    6.622183] hub 5-0:1.0: 2 ports detected
>[    6.622352] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
>[    6.622374] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    6.622381] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>[    6.622391] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    6.622424] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
>[    6.622487] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
>[    6.622489] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.622491] usb usb6: Product: UHCI Host Controller
>[    6.622492] usb usb6: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla uhci_hcd
>[    6.622494] usb usb6: SerialNumber: 0000:00:1d.2
>[    6.622615] hub 6-0:1.0: USB hub found
>[    6.622623] hub 6-0:1.0: 2 ports detected
>[    6.624190] ehci-pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
>[    6.624433] firewire_ohci 0000:08:03.1: PCI->APIC IRQ transform: INT A -> IRQ 16
>[    6.627996] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    6.628007] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
>[    6.628030] ehci-pci 0000:00:1d.7: debug port 1
>[    6.631974] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    6.646215] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc304c00
>[    6.660124] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    6.660192] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
>[    6.660194] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.660196] usb usb7: Product: EHCI Host Controller
>[    6.660197] usb usb7: Manufacturer: Linux 5.2.14-2.g7f85414-vanilla ehci_hcd
>[    6.660199] usb usb7: SerialNumber: 0000:00:1d.7
>[    6.660352] hub 7-0:1.0: USB hub found
>[    6.660362] hub 7-0:1.0: 6 ports detected
>[    6.677943] ata_piix 0000:00:1f.1: version 2.13
>[    6.677965] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 19
>[    6.684024] firewire_ohci 0000:08:03.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>[    6.688024] scsi host3: ata_piix
>[    6.688123] hub 4-0:1.0: USB hub found
>[    6.688136] hub 4-0:1.0: 2 ports detected
>[    6.701400] scsi host4: ata_piix
>[    6.701498] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
>[    6.701500] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
>[    6.716159] hub 5-0:1.0: USB hub found
>[    6.716172] hub 5-0:1.0: 2 ports detected
>[    6.744472] hub 6-0:1.0: USB hub found
>[    6.744485] hub 6-0:1.0: 2 ports detected
>[    6.875809] ata4.00: ATAPI: MATSHITABD-CMB UJ-120, 1.04, max UDMA/33
>[    6.884775] scsi 3:0:0:0: CD-ROM            MATSHITA BD-CMB UJ-120    1.04 PQ: 0 ANSI: 5
>[    6.909119] scsi 3:0:0:0: Attached scsi generic sg1 type 5
>[    6.938541] sr 3:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>[    6.938545] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    6.939253] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[    6.955971] usb 1-2: new high-speed USB device number 2 using ehci-pci
>[    7.044860] yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0258, PCI irq 16
>[    7.044867] yenta_cardbus 0000:08:03.0: Socket status: 30000006
>[    7.044874] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [io  0xf000-0xffff]
>[    7.044877] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0xfc000000-0xfc0fffff]
>[    7.044879] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc000000-0xfc0fffff:
>[    7.044883]  excluding 0xfc000000-0xfc00ffff
>[    7.115686] usb 1-2: New USB device found, idVendor=05ca, idProduct=1839, bcdDevice= 1.00
>[    7.115689] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    7.204041] usb 4-1: new full-speed USB device number 2 using uhci_hcd
>[    7.204099] firewire_core 0000:08:03.1: created device fw0: GUID 080046030284a233, S400
>[    7.370107] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
>[    7.407004] usb 4-1: New USB device found, idVendor=03f0, idProduct=010c, bcdDevice= 0.03
>[    7.407008] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    7.407010] usb 4-1: Product: Multimedia Keyboard Hub
>[    7.407012] usb 4-1: Manufacturer: HP
>[    7.415026] hub 4-1:1.0: USB hub found
>[    7.416356] hub 4-1:1.0: 3 ports detected
>[    7.712070] usb 4-1.1: new full-speed USB device number 3 using uhci_hcd
>[    7.865996] usb 4-1.1: New USB device found, idVendor=03f0, idProduct=020c, bcdDevice= 0.03
>[    7.865998] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    7.866000] usb 4-1.1: Product: Multimedia Keyboard Hub
>[    7.866002] usb 4-1.1: Manufacturer: HP
>[    8.035966] usb 5-1: new low-speed USB device number 2 using uhci_hcd
>[    8.194705] systemd-journald[205]: Received SIGTERM from PID 1 (systemd).
>[    8.230381] usb 5-1: New USB device found, idVendor=046d, idProduct=c408, bcdDevice=14.00
>[    8.230383] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.230385] usb 5-1: Product: USB Trackball
>[    8.230387] usb 5-1: Manufacturer: Logitech
>[    8.700168] printk: systemd: 26 output lines suppressed due to ratelimiting
>[    9.732115] systemd[1]: systemd +suse.135.g0f9271c133 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    9.732281] systemd[1]: Detected architecture x86-64.
>[    9.755676] systemd[1]: Set hostname to <vaio>.
>[    9.805253] systemd-system-update-generator[408]: Offline system update overridden by runlevel "3" on the kernel command line
>[    9.886723] systemd[1]: /usr/lib/systemd/system/display-manager.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/displaymanager.pid â /run/displaymanager.pid; please update the unit file accordingly.
>[    9.909910] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
>[    9.909928] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
>[    9.921381] systemd[1]: /usr/lib/systemd/system/ntpd.service:15: PIDFile= references a path below legacy directory /var/run/, updating /var/run/ntp/ntpd.pid â /run/ntp/ntpd.pid; please update the unit file accordingly.
>[   10.071766] systemd[1]: initrd-switch-root.service: Succeeded.
>[   10.072305] systemd[1]: Stopped Switch Root.
>[   10.079927] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
>[   10.232007] device-mapper: uevent: version 1.0.3
>[   10.232115] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
>[   10.256874] EXT4-fs (sda9): re-mounted. Opts: (null)
>[   10.966188] systemd-journald[422]: Received request to flush runtime journal from PID 1
>[   11.410227] sky2: driver version 1.30
>[   11.410290] sky2 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
>[   11.410347] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
>[   11.411376] sky2 0000:02:00.0 eth0: addr 00:1a:80:27:d6:7e
>[   11.463559] tifm_7xx1 0000:08:03.2: PCI->APIC IRQ transform: INT A -> IRQ 16
>[   11.463924] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[   11.499023] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 19
>[   11.499070] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[   11.552218] usbcore: registered new interface driver usbhid
>[   11.552221] usbhid: USB HID core driver
>[   11.567097] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[   11.574696] media: Linux media interface: v0.10
>[   11.591649] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[   11.593208] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[   11.593212] cfg80211: failed to load regulatory.db
>[   11.632136] videodev: Linux video capture interface: v2.00
>[   11.634857] kvm: disabled by bios
>[   11.666484] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
>[   11.671145] kvm: disabled by bios
>[   11.673631] intel_powerclamp: No package C-state available
>[   11.730374] intel_powerclamp: No package C-state available
>[   11.732804] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1839)
>[   11.735810] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
>[   11.736237] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
>[   11.736239] uvcvideo: Failed to initialize the device (-5).
>[   11.736335] usbcore: registered new interface driver uvcvideo
>[   11.736336] USB Video Class driver (1.1.1)
>[   11.757497] snd_hda_codec_idt hdaudioC1D0: autoconfig for CXD9872AKD: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:speaker
>[   11.757500] snd_hda_codec_idt hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   11.757502] snd_hda_codec_idt hdaudioC1D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>[   11.757504] snd_hda_codec_idt hdaudioC1D0:    mono: mono_out=0x0
>[   11.757506] snd_hda_codec_idt hdaudioC1D0:    dig-out=0x11/0x0
>[   11.757507] snd_hda_codec_idt hdaudioC1D0:    inputs:
>[   11.757509] snd_hda_codec_idt hdaudioC1D0:      Internal Mic=0x14
>[   11.757511] snd_hda_codec_idt hdaudioC1D0:      Mic=0xd
>[   11.759792] iTCO_vendor_support: vendor-support=0
>[   11.774260] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[   11.774297] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>[   11.774495] gpio_ich gpio_ich.1.auto: GPIO from 462 to 511
>[   11.774666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   11.778041] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
>[   11.778043] iwl4965: Copyright(c) 2003-2011 Intel Corporation
>[   11.778180] iwl4965 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
>[   11.778217] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
>[   11.816682] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
>[   11.827205] iwl4965 0000:06:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
>[   11.828559] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
>[   11.845861] input: HP Multimedia Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:03F0:020C.0001/input/input6
>[   11.886393] snd_hda_codec_realtek hdaudioC1D2: ALC262: SKU not ready 0x411111f0
>[   11.886469] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC262: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
>[   11.886471] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   11.886473] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   11.886475] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
>[   11.886477] snd_hda_codec_realtek hdaudioC1D2:    dig-out=0x1e/0x0
>[   11.886478] snd_hda_codec_realtek hdaudioC1D2:    inputs:
>[   11.892973] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
>[   11.908406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
>[   11.908543] hid-generic 0003:03F0:020C.0001: input,hidraw0: USB HID v1.00 Keyboard [HP Multimedia Keyboard Hub] on usb-0000:00:1d.0-1.1/input0
>[   11.909270] input: HP Multimedia Keyboard Hub Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:03F0:020C.0002/input/input7
>[   11.942601] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
>[   11.968155] input: HP Multimedia Keyboard Hub System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:03F0:020C.0002/input/input8
>[   11.968242] input: HP Multimedia Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:03F0:020C.0002/input/input9
>[   11.968412] hid-generic 0003:03F0:020C.0002: input,hiddev96,hidraw1: USB HID v1.00 Device [HP Multimedia Keyboard Hub] on usb-0000:00:1d.0-1.1/input1
>[   11.968785] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/0003:046D:C408.0003/input/input10
>[   11.968895] hid-generic 0003:046D:C408.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.1-1/input0
>[   12.403509] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
>[   12.410341] EXT4-fs (sda3): Mount option "noacl" will be removed by 3.5
>               Contact linux-ext4@vger.kernel.org if you think we should keep it.
>
>[   12.410345] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
>[   12.411412] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
>[   12.414311] EXT4-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended
>[   12.414742] EXT4-fs (sda3): mounted filesystem without journal. Opts: noacl
>[   12.501252] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[   12.510962] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
>[   12.521816] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
>[   12.540588] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
>[   13.060963] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
>[   13.389832] No iBFT detected.
>[   13.417265] sky2 0000:02:00.0 eth0: enabling interface
>[   14.061034] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
>[   14.062391] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
>[   15.062460] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
>[   16.475693] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both

Actions: View

Attachments on bug 111853: 145577 | 145584 | 145591 | 145757 | 145758

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.