Attachment 20073 Details for Bug 18387 – xorg.conf

xorg.conf

xorg.conf (text/plain), 9.98 KB, created by Nico Schlömer on 2008-11-05 09:05:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nico Schlömer

Created: 2008-11-05 09:05:47 UTC

Size: 9.98 KB

patch

obsolete

># **********************************************************************
># Module section -- this  section  is used to specify
># which dynamically loadable modules to load.
># **********************************************************************
>#
>Section "Module"
>
># This loads the DBE extension module.
>    Load        "dbe"  	# Double buffer extension
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>    SubSection  "extmod"
>      Option    "omit xfree86-dga"   # don't initialise the DGA extension
>    EndSubSection
>
># This loads the font modules
>#    Load        "type1"
>    Load        "freetype"
>#    Load        "xtt"
>
># This loads the GLX module
>    Load       "glx"
># This loads the DRI module
>    Load       "dri"
>
>EndSection
>
># **********************************************************************
># Files section.  This allows default font and rgb paths to be set
># **********************************************************************
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
>
>#    RgbPath	"/usr/share/X11/rgb"
>
># Multiple FontPath entries are allowed (which are concatenated together),
># as well as specifying multiple comma-separated entries in one FontPath
># command (or a combination of both methods)
># 
># 
>
>    FontPath   "/usr/share/fonts/misc/"
>#    FontPath   "/usr/share/fonts/100dpi/"
>    FontPath   "/usr/share/fonts/75dpi/"
>
>
>    FontPath   "/usr/share/fonts/arphicfonts/"
>    FontPath   "/usr/share/fonts/artwiz-aleczapka-en/"
>    FontPath   "/usr/share/fonts/baekmuk-fonts/"
>    FontPath   "/usr/share/fonts/corefonts/"
>    FontPath   "/usr/share/fonts/dejavu/"
>    FontPath   "/usr/share/fonts/freefonts/"
>    FontPath   "/usr/share/fonts/kochi-substitute/"
>    FontPath   "/usr/share/fonts/terminus/"
>    FontPath   "/usr/share/fonts/ttf-bitstream-vera/"
>    FontPath   "/usr/share/fonts/unifont/"
>
>#    FontPath   "/usr/lib/X11/fonts/local/"
>#    FontPath   "/usr/lib/X11/fonts/misc/"
>#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
>#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
>#    FontPath   "/usr/lib/X11/fonts/Speedo/"
>#    FontPath   "/usr/lib/X11/fonts/Type1/"
>#    FontPath   "/usr/lib/X11/fonts/TrueType/"
>#    FontPath   "/usr/lib/X11/fonts/freefont/"
>#    FontPath   "/usr/lib/X11/fonts/75dpi/"
>#    FontPath   "/usr/lib/X11/fonts/100dpi/"
>
># The module search path.  The default path is shown here.
>
>#    ModulePath "/usr/lib/modules"
>
>EndSection
>
>
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Core keyboard's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier	"Keyboard1"
>    Driver	"evdev"
>
>    Option "AutoRepeat" "500 30"
>
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a non-U.S.
># keyboard, you will probably want to use:
>#    Option "XkbModel"    "pc105"
># If you have a US Microsoft Natural keyboard, you can use:
>#    Option "XkbModel"    "microsoft"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#    Option "XkbLayout"   "de"
># or:
>#    Option "XkbLayout"   "de"
>#    Option "XkbVariant"  "nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#    Option "XkbOptions"  "ctrl:swapcaps"
>
># These are the default XKB settings for Xorg
>#    Option "XkbRules"    "xorg"
>#    Option "XkbModel"    "pc105"
>#    Option "XkbLayout"   "us"
>#    Option "XkbVariant"  ""
>#    Option "XkbOptions"  ""
>
>#    Option "XkbDisable"
>
>	Option "XkbRules"	"xorg"
>#	Option "XkbModel"	"macintosh"
>	Option "XkbModel"	"macbook79"
>	Option "XkbVariant"	"nodeadkeys"
>	Option "XkbLayout"	"intl"
>	Option "XkbOption"	"numpad:mac"
>EndSection
>
>
>
>Section "InputDevice"
>	Identifier	"Apple Bluetooth Keyboard"
>	Driver		"evdev"
># 	Option		"Name"		"HID 05ac:1000"
># 	I: Bus=0003 Vendor=05ac Product=1000 Version=0111
>#	N: Name="HID 05ac:1000"
>#	P: Phys=usb-0000:00:1a.0-1/input0
>#	S: Sysfs=/class/input/input4
>#	U: Uniq=
>#	H: Handlers=kbd event4
>#	B: EV=120013
>	Option		"XkbRules"	"xorg"
>	Option		"XkbModel"	"macintosh"
>	Option		"XkbLayout"	"us"
>	Option		"XkbVariant"	"mac"
>EndSection
>
>
># **********************************************************************
># Core Pointer's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
># Identifier and driver
>
>    Identifier	"Mouse1"
>    Driver	"mouse"
>    Option "Protocol"    "Auto"	# Auto detect
>    Option "Device"      "/dev/input/mice"
>
># Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
># horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
># 3 buttons and you need to map the wheel to different button ids to avoid
># conflicts.
>
>    Option "ZAxisMapping"   "4 5 6 7"
>
># Emulate3Buttons is an option for 2-button mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
>#    Option "Emulate3Buttons"
>#    Option "Emulate3Timeout"    "50"
>
>EndSection
>
>
>Section "InputDevice"
>       Identifier      "Synaptics Touchpad"
>       Driver          "synaptics"
>       Option          "CorePointer"
>       Option          "Device"                "/dev/input/mouse1"
>       Option          "Protocol"              "auto-dev"
>       Option  "LeftEdge"      "100"
>       Option  "RightEdge"     "1120"
>       Option  "TopEdge"       "50"
>       Option  "BottomEdge"    "310"
>       Option  "FingerLow"     "25"
>       Option  "FingerHigh"    "30"
>       Option  "MaxTapTime"    "180"
>       Option  "MaxTapMove"    "220"
>       Option  "MaxDoubleTapTime"      "180"
>       Option  "VertScrollDelta"       "20"
>       Option  "HorizScrollDelta"      "50"
>       Option  "MinSpeed"      "0.79"
>       Option  "MaxSpeed"      "0.88"
>       Option  "AccelFactor"   "0.0020"
>       Option  "SHMConfig"     "on"
>EndSection
>
>
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>
>	Identifier  "AppleLCD"
>
>	# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
>#	Modeline "1280x800_60.00"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync
>
>#	Option "PreferredMode"  "1280x800"
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>#    HorizSync   31.5 - 48.5
>
>#    HorizSync	30-64         # multisync
>#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
>#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>#    VertRefresh 50-70
>	Option "DPMS"
>
>EndSection
>
>
>Section "Monitor"
>	Identifier  "Dell E198WFP"
>
>	VendorName "Dell"
>	ModelName "E198WFP"
>
>        # the following is useful for example for getting the 100% zoom in Acroread to a physical 100%
>	DisplaySize 408 255
>
>	Option "DPMS"
>	Option "OffTime" "20"
>
>#	Option "PreferredMode"  "1440x900_60.00"
>	Option "PreferredMode"  "1440x900"
>
>	# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
>#	Modeline "1280x800_60.00"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync
>
>	# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
>#	Modeline "1440x900_60.00"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync
>
>#	As taken from
>#	http://www1.ap.dell.com/content/products/productdetails.aspx/e198wfp?c=hk&cs=hkbsd1&l=en&s=bsd
>#	HorizSync	30 - 83
>#	VertRefresh	56 - 75
>EndSection
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
>Section "Device"
>	Identifier	"IntelGMAX3100"
>	Driver		"intel"
>#	BusID		"PCI:0:2:0"
>
>	Option		"monitor-TMDS-1" "Dell E198WFP"
>#	Option		"MetaModes" "1280x800,1440x900; 1280x800,NULL; NULL,1440x900"
>EndSection
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
>Section "Screen"
>    Identifier  "Screen 0"
>    Device      "IntelGMAX3100"
>    Monitor     "AppleLCD"
>
>    DefaultDepth 24
>    Subsection "Display"
>        Depth       24
>        Modes       "1280x800"
>        ViewPort    0 0
>    EndSubsection
>
>    Option	"XaaNoOffscreenPixmaps" "true"
>EndSection
>
>#Section "Screen"
>#	Identifier  "External Screen"
>#	Device      "IntelGMAX3100"
>#	Monitor     "Dell E198WFP"
>#
>#	DefaultDepth 24
>#	Subsection "Display"
>#		Depth       24
>#		Modes       "1440x900"
>#		ViewPort    0 0
>#	EndSubsection
>#EndSection
>
># **********************************************************************
># ServerLayout sections.
># **********************************************************************
>
>Section "ServerLayout"
>
>	Identifier  "Simple Layout"
>
>	Screen "Screen 0"
>#	Screen "External Screen"
>
>#	Option "Clone" "On"
>
>	InputDevice "Mouse1" "CorePointer"
>	InputDevice "Keyboard1" "CoreKeyboard"
>EndSection
>
>
>Section "ServerFlags"
>	Option	"AIGLX"
>EndSection
>
>
>Section "Extensions"
>	Option	"Composite" "Enable"
>EndSection
>
>
>Section "DRI"
>    Group "video"
>    Mode 0660
>EndSection

Actions: View

Attachments on bug 18387: 20073 | 20177

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.