Attachment 20248 Details for Bug 18496 – dmesg

dmesg

dmesg (text/plain), 30.71 KB, created by D on 2008-11-12 02:37:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: D

Created: 2008-11-12 02:37:02 UTC

Size: 30.71 KB

patch

obsolete

>866917] Linux agpgart interface v0.103
>[    4.866993] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>[    4.867326] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>[    4.881061] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    4.881215] [drm] Initialized drm 1.1.0 20060810
>[    4.881303] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    4.881360] pci 0000:00:02.0: setting latency timer to 64
>[    4.881475] [drm] Initialized i915 1.6.0 20060119 on minor 0
>[    4.882730] brd: module loaded
>[    4.882800] tg3.c:v3.94 (August 14, 2008)
>[    4.882903] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    4.882999] tg3 0000:02:00.0: setting latency timer to 64
>[    4.891207] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:07:18:63
>[    4.891305] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>[    4.891396] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[    4.891520] Driver 'sd' needs updating - please use bus_type methods
>[    4.891623] ahci 0000:00:1f.2: version 3.0
>[    4.891640] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    4.891799] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>[    4.891892] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
>[    4.891951] ahci 0000:00:1f.2: setting latency timer to 64
>[    4.892164] scsi0 : ahci
>[    4.892333] scsi1 : ahci
>[    4.892454] scsi2 : ahci
>[    4.892651] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 284
>[    4.892743] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 284
>[    4.892835] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 284
>[    5.197023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    5.197711] ata1.00: _GTF unexpected object type 0x1
>[    5.241697] ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
>[    5.241754] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>[    5.242686] ata1.00: _GTF unexpected object type 0x1
>[    5.242883] ata1.00: configured for UDMA/133
>[    5.558019] ata2: SATA link down (SStatus 0 SControl 300)
>[    5.863018] ata3: SATA link down (SStatus 0 SControl 300)
>[    5.863177] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
>[    5.863410] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>[    5.863480] sd 0:0:0:0: [sda] Write Protect is off
>[    5.863533] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.863558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.863705] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>[    5.863773] sd 0:0:0:0: [sda] Write Protect is off
>[    5.863826] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.863851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.863944]  sda: sda1 sda2 < sda5 sda6 sda7 >
>[    5.964007] sd 0:0:0:0: [sda] Attached SCSI disk
>[    5.964276] ata_piix 0000:00:1f.1: version 2.12
>[    5.964290] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    5.964384] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    5.964457] scsi3 : ata_piix
>[    5.965317] scsi4 : ata_piix
>[    5.966282] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>[    5.966339] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>[    6.155492] ata4.00: ATAPI: Slimtype DVD A  DS8A1P, CA11, max UDMA/33
>[    6.196411] ata4.00: configured for UDMA/33
>[    6.380023] isa bounce pool size: 16 pages
>[    6.382510] scsi 3:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CA11 PQ: 0 ANSI: 5
>[    6.382932] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
>[    6.383012] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    6.383016] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    6.383189] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    6.387197] ehci_hcd 0000:00:1a.7: debug port 1
>[    6.387254] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>[    6.387267] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>[    6.397008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[    6.397198] usb usb1: configuration #1 chosen from 1 choice
>[    6.397297] hub 1-0:1.0: USB hub found
>[    6.397353] hub 1-0:1.0: 4 ports detected
>[    6.498240] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    6.498306] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    6.498310] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    6.498456] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    6.502463] ehci_hcd 0000:00:1d.7: debug port 1
>[    6.502520] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[    6.502530] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>[    6.512007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[    6.512204] usb usb2: configuration #1 chosen from 1 choice
>[    6.512302] hub 2-0:1.0: USB hub found
>[    6.512358] hub 2-0:1.0: 6 ports detected
>[    6.816009] usb 2-3: new high speed USB device using ehci_hcd and address 2
>[    6.930822] usb 2-3: configuration #1 chosen from 1 choice
>[    6.931044] hub 2-3:1.0: USB hub found
>[    6.931243] hub 2-3:1.0: 4 ports detected
>[    7.235009] usb 2-5: new high speed USB device using ehci_hcd and address 3
>[    7.349460] usb 2-5: configuration #1 chosen from 1 choice
>[    7.349814] usbcore: registered new interface driver libusual
>[    7.349970] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    7.362790] i8042.c: Detected active multiplexing controller, rev 1.1.
>[    7.369149] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    7.369205] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    7.369258] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    7.369311] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    7.369364] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    7.369595] mice: PS/2 mouse device common for all mice
>[    7.370060] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
>[    7.370143] rtc0: alarms up to one month, y3k, hpet irqs
>[    7.370331] cpuidle: using governor ladder
>[    7.370593] cpuidle: using governor menu
>[    7.370945] TCP cubic registered
>[    7.370997] NET: Registered protocol family 17
>[    7.371255] PM: Resume from partition /dev/sda7
>[    7.371257] PM: Checking hibernation image.
>[    7.371436] PM: Resume from disk failed.
>[    7.371586]   Magic number: 0:354:447
>[    7.371817] rtc_cmos 00:09: setting system clock to 2008-11-11 20:24:11 UTC (1226435051)
>[    7.372006] Marking TSC unstable due to TSC halts in idle
>[    7.420160] usb 2-3.1: new low speed USB device using ehci_hcd and address 4
>[    7.567408] usb 2-3.1: configuration #1 chosen from 1 choice
>[    7.641159] usb 2-3.3: new full speed USB device using ehci_hcd and address 5
>[    7.643179] input: AT Translated Set 2 keyboard as /class/input/input0
>[    7.899217] usb 2-3.3: configuration #1 chosen from 1 choice
>[    7.974158] usb 2-3.4: new low speed USB device using ehci_hcd and address 6
>[    8.066131] usb 2-3.4: configuration #1 chosen from 1 choice
>[    8.185504] kjournald starting.  Commit interval 5 seconds
>[    8.185571] EXT3-fs: mounted filesystem with writeback data mode.
>[    8.185633] VFS: Mounted root (ext3 filesystem) readonly.
>[    8.185704] Freeing unused kernel memory: 300k freed
>[   13.400966] ACPI: WMI: Mapper loaded
>[   13.520790] input: Power Button (FF) as /class/input/input1
>[   13.527148] ACPI: Power Button (FF) [PWRF]
>[   13.527283] input: Lid Switch as /class/input/input2
>[   13.533180] ACPI: Lid Switch [LID0]
>[   13.533354] input: Sleep Button (CM) as /class/input/input3
>[   13.541160] ACPI: Sleep Button (CM) [SLPB]
>[   13.643181] thermal LNXTHERM:01: registered as thermal_zone0
>[   13.653456] ACPI: Thermal Zone [TZS0] (67 C)
>[   13.661395] thermal LNXTHERM:02: registered as thermal_zone1
>[   13.670277] acer-wmi: Acer Laptop ACPI-WMI Extras
>[   13.671401] ACPI: Thermal Zone [TZS1] (70 C)
>[   13.680174] acpi device:05: registered as cooling_device1
>[   13.687127] input: Video Bus as /class/input/input4
>[   13.694180] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[   13.808392] ACPI: AC Adapter [ADP1] (on-line)
>[   13.971145] USB Universal Host Controller Interface driver v3.0
>[   13.971251] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[   13.971316] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[   13.971320] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[   13.974594] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[   13.974724] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>[   13.974934] usb usb3: configuration #1 chosen from 1 choice
>[   13.975060] hub 3-0:1.0: USB hub found
>[   13.975119] hub 3-0:1.0: 2 ports detected
>[   14.029189] ACPI: Battery Slot [BAT0] (battery present)
>[   14.076361] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[   14.076431] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[   14.076435] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[   14.076598] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[   14.076753] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>[   14.076936] usb usb4: configuration #1 chosen from 1 choice
>[   14.077050] hub 4-0:1.0: USB hub found
>[   14.077106] hub 4-0:1.0: 2 ports detected
>[   14.117887] irda_init()
>[   14.117906] NET: Registered protocol family 23
>[   14.179026] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[   14.179096] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[   14.179099] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[   14.179261] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>[   14.179384] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>[   14.179565] usb usb5: configuration #1 chosen from 1 choice
>[   14.179666] hub 5-0:1.0: USB hub found
>[   14.179723] hub 5-0:1.0: 2 ports detected
>[   14.280552] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[   14.280661] b43-pci-bridge 0000:04:00.0: setting latency timer to 64
>[   14.282413] Driver 'sr' needs updating - please use bus_type methods
>[   14.293528] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[   14.293625] Uniform CD-ROM driver Revision: 3.20
>[   14.293826] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[   14.307182] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
>[   14.307275] Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011f]
>[   14.307352] Yenta: Using CSCINT to route CSC interrupts to PCI
>[   14.307406] Yenta: Routing CardBus interrupts to PCI
>[   14.307462] Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>[   14.307577] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[   14.307641] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[   14.307644] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[   14.307869] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>[   14.307995] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>[   14.308219] usb usb6: configuration #1 chosen from 1 choice
>[   14.308320] hub 6-0:1.0: USB hub found
>[   14.308376] hub 6-0:1.0: 2 ports detected
>[   14.313857] input: X10 Wireless Technology Inc USB Receiver as /class/input/input5
>[   14.314512] nsc-ircc 00:0a: activated
>[   14.314564] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
>[   14.314625] nsc-ircc, chip->init
>[   14.314687] nsc-ircc, Found chip at base=0x02e
>[   14.315516] nsc-ircc, driver loaded (Dag Brattli)
>[   14.315843] IrDA: Registered device irda0
>[   14.315956] nsc-ircc, Found dongle: Supports SIR Mode only
>[   14.316158] nsc-ircc, chip->init
>[   14.316219] nsc-ircc, Found chip at base=0x02e
>[   14.316310] nsc-ircc, driver loaded (Dag Brattli)
>[   14.316363] nsc_ircc_open(), can't get iobase of 0x2f8
>[   14.321758] ati_remote: Weird data, len=1 ff 00 00 00 00 00 ...
>[   14.323191] usbcore: registered new interface driver ati_remote
>[   14.323249] ati_remote: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
>[   14.496448] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   14.496565] sr 3:0:0:0: Attached scsi generic sg1 type 5
>[   14.530820] Yenta: ISA IRQ mask 0x0cf0, PCI irq 22
>[   14.530879] Socket status: 30000006
>[   14.530930] Yenta: Raising subordinate bus# of parent bus (#0f) from #10 to #13
>[   14.531044] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>[   14.531100] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>[   14.531156] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>[   14.535288] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[   14.535360] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[   14.535364] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[   14.535549] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>[   14.535679] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>[   14.535835] usb usb7: configuration #1 chosen from 1 choice
>[   14.535916] hub 7-0:1.0: USB hub found
>[   14.535973] hub 7-0:1.0: 2 ports detected
>[   14.648662] Linux video capture interface: v2.00
>[   14.665667] usbcore: registered new interface driver hiddev
>[   14.669775] input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
>[   14.677206] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.4
>[   14.677366] usbcore: registered new interface driver usbhid
>[   14.677421] usbhid: v2.6:USB HID core driver
>[   14.738299] tifm_7xx1 0000:0f:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[   15.188531] pwc: Philips webcam module version 10.0.13 loaded.
>[   15.188592] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>[   15.188686] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>[   15.188780] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>[   15.188902] pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
>[   15.189376] pwc: Registered as /dev/video0.
>[   15.191226] usbcore: registered new interface driver Philips webcam
>[   15.436364] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04713/0x204000
>[   15.493166] input: SynPS/2 Synaptics TouchPad as /class/input/input7
>[   15.593449] dvb-usb: found a 'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in cold state, will try to load a firmware
>[   15.593555] firmware: requesting dvb-usb-dtt200u-01.fw
>[   15.692919] dvb-usb: downloading firmware from file 'dvb-usb-dtt200u-01.fw'
>[   15.752767] usbcore: registered new interface driver dvb_usb_dtt200u
>[   15.763084] b43-phy0: Broadcom 4311 WLAN found
>[   15.786692] phy0: Selected rate control algorithm 'pid'
>[   15.835518] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[   15.835638] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[   15.844800] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>[   16.046539] Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ]
>[   16.109202] usbcore: registered new interface driver snd-usb-audio
>[   16.592569] usb 2-5: USB disconnect, address 3
>[   16.592660] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
>[   16.961031] fuse init (API version 7.9)
>[   17.447700] Adding 995988k swap on /dev/sda7.  Priority:-1 extents:1 across:995988k
>[   18.057355] EXT3 FS on sda6, internal journal
>[   18.307051] usb 2-5: new high speed USB device using ehci_hcd and address 7
>[   18.421412] usb 2-5: config 1 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 376
>[   18.428058] usb 2-5: configuration #1 chosen from 1 choice
>[   18.428188] dvb-usb: found a 'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state.
>[   18.428658] dvb-usb: will use the device's hardware PID filter (table count: 15).
>[   18.433523] DVB: registering new adapter (WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U))
>[   18.433717] DVB: registering frontend 0 (WideView USB DVB-T)...
>[   18.434078] input: IR-receiver inside an USB DVB receiver as /class/input/input8
>[   18.441131] dvb-usb: schedule remote query interval to 300 msecs.
>[   18.441137] dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U) successfully initialized and connected.
>[   20.500044] Clocksource tsc unstable (delta = -146187477 ns)
>[   20.741159] dvb-usb: recv bulk message failed: -110
>[   22.532202] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
>[   24.942749] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
>[   36.898456] tg3 0000:02:00.0: wake-up capability disabled by ACPI
>[   36.899369] tg3 0000:02:00.0: PME# disabled
>[   37.501645] [drm:i915_getparam] *ERROR* Unknown parameter 5
>[   38.467223] input: b43-phy0 as /class/input/input9
>[   38.502338] firmware: requesting b43/ucode5.fw
>[   38.517797] tg3: eth0: Link is up at 100 Mbps, full duplex.
>[   38.517806] tg3: eth0: Flow control is off for TX and off for RX.
>[   38.633217] firmware: requesting b43/pcm5.fw
>[   38.638336] firmware: requesting b43/b0g0initvals5.fw
>[   38.643521] firmware: requesting b43/b0g0bsinitvals5.fw
>[   38.763061] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>[  951.044384] ACPI: EC: GPE storm detected, disabling EC GPE
>[ 2064.689979] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>[17338.388574] tg3 0000:02:00.0: PME# enabled
>[17338.389090] tg3 0000:02:00.0: wake-up capability enabled by ACPI
>[17340.138162] PM: Syncing filesystems ... done.
>[17340.138725] PM: Preparing system for mem sleep
>[17340.139215] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[17340.160790] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>[17340.160879] PM: Entering mem sleep
>[17340.160881] Suspending console(s) (use no_console_suspend to debug)
>[17340.167262] dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U) successfully deinitialized and disconnected.
>[17340.743080] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[17340.864560] sd 0:0:0:0: [sda] Stopping disk
>[17341.308366] pci 0000:00:02.0: PCI INT A disabled
>[17341.319297] nsc-ircc 00:0a: disabled
>[17341.319378] ACPI handle has no context!
>[17341.319497] ACPI handle has no context!
>[17341.319504] tifm_7xx1 0000:0f:06.2: PCI INT A disabled
>[17341.319511] ACPI handle has no context!
>[17341.330289] b43-pci-bridge 0000:04:00.0: PCI INT A disabled
>[17341.385147] ata_piix 0000:00:1f.1: PCI INT A disabled
>[17341.385291] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[17341.396093] uhci_hcd 0000:00:1d.2: PCI INT C disabled
>[17341.396129] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[17341.396166] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[17341.396338] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[17341.407110] ehci_hcd 0000:00:1a.7: PCI INT C disabled
>[17341.418093] uhci_hcd 0000:00:1a.1: PCI INT B disabled
>[17341.418129] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[17341.436071] ACPI: Preparing to enter system sleep state S3
>[17341.548239] Extended CMOS year: 2000
>[17341.548526]  hwsleep-0326 [00] enter_sleep_state     : Entering sleep state [S3]
>[17341.548526] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[17341.548526] Back to C!
>[17341.548526] Extended CMOS year: 2000
>[17341.548526] ACPI: Waking up from system sleep state S3
>[17341.854557] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[17342.020016] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[17342.020029] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
>[17342.033610] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
>[17342.033628] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[17342.033633] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[17342.033688] usb usb3: root hub lost power or was reset
>[17342.033710] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[17342.033715] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[17342.033768] usb usb4: root hub lost power or was reset
>[17342.044067] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
>[17342.044072] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[17342.055092] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[17342.055099] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
>[17342.055119] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[17342.055126] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[17342.055157] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
>[17342.055173] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
>[17342.055183] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>[17342.055190] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[17342.055233] pcieport-driver 0000:00:1c.0: setting latency timer to 64
>[17342.055252] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b)
>[17342.055265] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
>[17342.055270] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
>[17342.055275] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
>[17342.055285] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>[17342.055292] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>[17342.055334] pcieport-driver 0000:00:1c.1: setting latency timer to 64
>[17342.055351] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030b)
>[17342.055365] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
>[17342.055370] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
>[17342.055375] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x0, writing 0x4040)
>[17342.055385] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>[17342.055392] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>[17342.055434] pcieport-driver 0000:00:1c.2: setting latency timer to 64
>[17342.055441] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[17342.055446] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[17342.055499] usb usb5: root hub lost power or was reset
>[17342.055519] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[17342.055524] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[17342.055576] usb usb6: root hub lost power or was reset
>[17342.055594] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[17342.055599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[17342.055653] usb usb7: root hub lost power or was reset
>[17342.066058] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[17342.066063] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[17342.066121] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
>[17342.066134] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801)
>[17342.066139] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
>[17342.066145] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22805050)
>[17342.066150] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20100f00, writing 0x20130f00)
>[17342.066161] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
>[17342.066178] pci 0000:00:1e.0: setting latency timer to 64
>[17342.066220] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
>[17342.066240] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
>[17342.066265] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
>[17342.066275] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[17342.066280] ata_piix 0000:00:1f.1: setting latency timer to 64
>[17342.078072] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[17342.078097] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[17342.078138] ahci 0000:00:1f.2: setting latency timer to 64
>[17342.078266] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000)
>[17342.078358] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0x80200000)
>[17342.078382] tg3 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[17342.078391] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100106)
>[17342.089058] b43-pci-bridge 0000:04:00.0: enabling device (0000 -> 0002)
>[17342.089064] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[17342.089092] b43-pci-bridge 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[17342.089121] b43-pci-bridge 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000)
>[17342.089127] b43-pci-bridge 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[17342.089136] b43-pci-bridge 0000:04:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100107)
>[17342.097090] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0xf (was 0x3c001ff, writing 0x5c0010b)
>[17342.097096] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0xe (was 0x0, writing 0x54fc)
>[17342.097102] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0xd (was 0x0, writing 0x5400)
>[17342.097108] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0xc (was 0x0, writing 0x50fc)
>[17342.097114] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0xb (was 0x0, writing 0x5000)
>[17342.097120] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000)
>[17342.097125] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000)
>[17342.097131] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000)
>[17342.097137] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000)
>[17342.097143] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb013100f)
>[17342.097150] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc204000)
>[17342.097156] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x3 (was 0x824010, writing 0x82a810)
>[17342.097164] yenta_cardbus 0000:0f:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
>[17342.229453] pci 0000:0f:06.1: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b)
>[17342.229477] pci 0000:0f:06.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc200000)
>[17342.229485] pci 0000:0f:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
>[17342.229493] pci 0000:0f:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
>[17342.240065] tifm_7xx1 0000:0f:06.2: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010b)
>[17342.240089] tifm_7xx1 0000:0f:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc205000)
>[17342.240095] tifm_7xx1 0000:0f:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
>[17342.240102] tifm_7xx1 0000:0f:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[17342.240118] tifm_7xx1 0000:0f:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[17342.240142] pci 0000:0f:06.3: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010b)
>[17342.240166] pci 0000:0f:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xfc206800)
>[17342.240172] pci 0000:0f:06.3: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
>[17342.240180] pci 0000:0f:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[17342.241120] nsc-ircc 00:0a: activated
>[17342.248550] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>[17342.248553] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>[17342.252074] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[17342.252078] pci 0000:00:02.0: setting latency timer to 64
>[17342.253470] sd 0:0:0:0: [sda] Starting disk
>[17342.270460] ata4.00: configured for UDMA/33
>[17342.383073] ata3: SATA link down (SStatus 0 SControl 300)
>[17342.383108] ata2: SATA link down (SStatus 0 SControl 300)
>[17343.199065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[17343.225222] ata1.00: _GTF unexpected object type 0x1
>[17343.238154] ata1.00: _GTF unexpected object type 0x1
>[17343.238332] ata1.00: configured for UDMA/133
>[17343.238407] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>[17343.238429] sd 0:0:0:0: [sda] Write Protect is off
>[17343.238432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[17343.238470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[17344.183415] dvb-usb: found a 'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state.
>[17344.183516] dvb-usb: will use the device's hardware PID filter (table count: 15).
>[17344.184535] DVB: registering new adapter (WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U))
>[17344.184723] DVB: registering frontend 0 (WideView USB DVB-T)...
>[17344.185064] input: IR-receiver inside an USB DVB receiver as /class/input/input10
>[17344.191077] dvb-usb: schedule remote query interval to 300 msecs.
>[17344.191079] dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U) successfully initialized and connected.
>[17344.192455] pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
>[17344.192495] pwc: Registered as /dev/video0.
>[17344.208566] input: X10 Wireless Technology Inc USB Receiver as /class/input/input11
>[17344.216381] ati_remote: Weird data, len=1 ff 00 00 00 14 20 ...
>[17344.217324] PM: Finishing wakeup.
>[17344.217326] Restarting tasks ... done.
>[17346.492144] dvb-usb: recv bulk message failed: -110
>[17346.929694] tg3 0000:02:00.0: wake-up capability disabled by ACPI
>[17346.929707] tg3 0000:02:00.0: PME# disabled
>[17347.023665] input: b43-phy0 as /class/input/input12
>[17347.186156] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>[17348.558170] tg3: eth0: Link is up at 100 Mbps, full duplex.
>[17348.558175] tg3: eth0: Flow control is off for TX and off for RX.
>[17348.792147] dvb-usb: recv bulk message failed: -110
>[17961.315713] ACPI: EC: GPE storm detected, disabling EC GPE

Actions: View

Attachments on bug 18496: 20247 | 20248 | 20249 | 20250 | 20334 | 20335 | 20336 | 21286

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.