Attachment 22991 Details for Bug 20142 – dmesg, first part is failed load with nvidia gl part... second part is with black line

dmesg, first part is failed load with nvidia gl part... second part is with black line

dmesg_black-line (text/plain), 53.80 KB, created by David Heidelberg (okias) on 2009-02-16 10:33:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Heidelberg (okias)

Created: 2009-02-16 10:33:45 UTC

Size: 53.80 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.29-rc5 (root@sc-neo) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #1 SMP Sun Feb 15 22:51:52 CET 2009
>Command line: root=/dev/sda2 quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
> BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
> BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
> BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
> BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>last_pfn = 0x140000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xbff90 max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-00000000bff90000
> 0000000000 - 00bfe00000 page 2M
> 00bfe00000 - 00bff90000 page 4k
>kernel direct mapping tables up to bff90000 @ 10000-15000
>last_map_addr: bff90000 end: bff90000
>init_memory_mapping: 0000000100000000-0000000140000000
> 0100000000 - 0140000000 page 2M
>kernel direct mapping tables up to 140000000 @ 13000-19000
>last_map_addr: 140000000 end: 140000000
>ACPI: RSDP 000F9470, 0014 (r0 ACPIAM)
>ACPI: RSDT BFF90000, 0048 (r1 MSI_NB MEGABOOK 20081226 MSFT       97)
>ACPI: FACP BFF90200, 0084 (r1 122608 FACP1133 20081226 MSFT       97)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT BFF905C0, 7D0F (r1  1ADTS 1ADTS008        8 INTL 20051117)
>ACPI: FACS BFF9E000, 0040
>ACPI: APIC BFF90390, 006C (r1 122608 APIC1133 20081226 MSFT       97)
>ACPI: MCFG BFF90400, 003C (r1 122608 OEMMCFG  20081226 MSFT       97)
>ACPI: SLIC BFF90440, 0176 (r1 MSI_NB MEGABOOK 20081226 MSFT       97)
>ACPI: OEMB BFF9E040, 0072 (r1 122608 OEMB1133 20081226 MSFT       97)
>ACPI: HPET BFF985C0, 0038 (r1 122608 OEMHPET  20081226 MSFT       97)
>ACPI: ASF! BFF98600, 0099 (r32 LEGEND I865PASF        1 INTL 20051117)
>ACPI: GSCI BFF9E0C0, 2024 (r1 122608 GMCHSCI  20081226 MSFT       97)
>ACPI: SSDT BFFA0A50, 04F0 (r1  PmRef    CpuPm     3000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Bootmem setup node 0 0000000000000000-0000000140000000
>  NODE_DATA [0000000000014000 - 0000000000017fff]
>  bootmap [0000000000018000 -  000000000003ffff] pages 28
>(6 early reservations) ==> bootmem [0000000000 - 0140000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000b0c598]    TEXT DATA BSS ==> [0000200000 - 0000b0c598]
>  #3 [0000099000 - 0000100000]    BIOS reserved ==> [0000099000 - 0000100000]
>  #4 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>  #5 [0000013000 - 0000014000]          PGTABLE ==> [0000013000 - 0000014000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00140000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x00000099
>    0: 0x00000100 -> 0x000bff90
>    0: 0x00100000 -> 0x00140000
>On node 0 totalpages: 1048345
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2428 pages reserved
>  DMA zone: 1493 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767944 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>4 Processors exceeds NR_CPUS limit of 2
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000
>PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000
>PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
>PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 49152 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027997
>Policy zone: Normal
>Kernel command line: root=/dev/sda2 quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Fast TSC calibration using PIT
>Detected 2260.930 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 4060480k/5242880k available (5646k kernel code, 1049500k absent, 132900k reserved, 2352k data, 504k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.86 BogoMIPS (lpj=2260930)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>[ds] using Core 2/Atom configuration
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>ACPI: Core revision 20081204
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4521.76 BogoMIPS (lpj=2260883)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>[ds] using Core 2/Atom configuration
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (9043.62 BogoMIPS).
>net_namespace: 1720 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
>pci 0000:00:1a.1: reg 20 io port: [0xa480-0xa49f]
>pci 0000:00:1a.2: reg 20 io port: [0xa400-0xa41f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8efec00-0xf8efefff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8ef8000-0xf8efbfff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
>pci 0000:00:1d.1: reg 20 io port: [0xac00-0xac1f]
>pci 0000:00:1d.2: reg 20 io port: [0xa880-0xa89f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8eff000-0xf8eff3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
>pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
>pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
>pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
>pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8eff800-0xf8efffff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf8eff400-0xf8eff4ff]
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:08:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
>pci 0000:08:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:08:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
>pci 0000:08:00.0: reg 24 io port: [0xec00-0xec7f]
>pci 0000:08:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff]
>pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfebfffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xf8fc0000-0xf8fdffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xf8f00000-0xf8ffffff]
>pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf9000000-0xf9dfffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xce000000-0xcfffffff]
>pci 0000:06:00.0: reg 10 64bit mmio: [0xf9efe000-0xf9efffff]
>pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:06:00.0: PME# disabled
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf9e00000-0xf9efffff]
>pci 0000:07:00.0: reg 10 32bit mmio: [0xf9fff800-0xf9ffffff]
>pci 0000:07:00.0: reg 14 32bit mmio: [0xf9fff400-0xf9fff47f]
>pci 0000:07:00.0: reg 20 32bit mmio: [0xf9fff000-0xf9fff07f]
>pci 0000:07:00.0: reg 24 32bit mmio: [0xf9ffec00-0xf9ffec7f]
>pci 0000:07:00.1: reg 10 32bit mmio: [0xf9ffe800-0xf9ffe8ff]
>pci 0000:07:00.2: reg 10 32bit mmio: [0xf9ffe400-0xf9ffe4ff]
>pci 0000:07:00.3: reg 10 32bit mmio: [0xf9ffe000-0xf9ffe0ff]
>pci 0000:07:00.4: reg 10 32bit mmio: [0xf9ffdc00-0xf9ffdcff]
>pci 0000:00:1c.5: bridge 32bit mmio: [0xf9f00000-0xf9ffffff]
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NET: Registered protocol family 23
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
>system 00:08: ioport range 0x4c0-0x4cf has been reserved
>system 00:08: ioport range 0x4d2-0x4ff has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:01.0:   IO window: 0xe000-0xefff
>pci 0000:00:01.0:   MEM window: 0xfa000000-0xfebfffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.0:   MEM window: 0xf8f00000-0xf8ffffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.1:   MEM window: 0xf9000000-0xf9dfffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000ce000000-0x000000cfffffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
>pci 0000:00:1c.3:   IO window: disabled
>pci 0000:00:1c.3:   MEM window: 0xf9e00000-0xf9efffff
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
>pci 0000:00:1c.5:   IO window: disabled
>pci 0000:00:1c.5:   MEM window: 0xf9f00000-0xf9ffffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:08: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:08: resource 1 mem: [0xfa000000-0xfebfffff]
>pci_bus 0000:08: resource 2 mem: [0xd0000000-0xdfffffff]
>pci_bus 0000:08: resource 3 mem: [0x0-0x0]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:02: resource 1 mem: [0xf8f00000-0xf8ffffff]
>pci_bus 0000:02: resource 2 mem: [0x0-0x0]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:03: resource 1 mem: [0xf9000000-0xf9dfffff]
>pci_bus 0000:03: resource 2 mem: [0xce000000-0xcfffffff]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:05: resource 0 mem: [0x0-0x0]
>pci_bus 0000:05: resource 1 mem: [0x0-0x0]
>pci_bus 0000:05: resource 2 mem: [0x0-0x0]
>pci_bus 0000:05: resource 3 mem: [0x0-0x0]
>pci_bus 0000:06: resource 0 mem: [0x0-0x0]
>pci_bus 0000:06: resource 1 mem: [0xf9e00000-0xf9efffff]
>pci_bus 0000:06: resource 2 mem: [0x0-0x0]
>pci_bus 0000:06: resource 3 mem: [0x0-0x0]
>pci_bus 0000:07: resource 0 mem: [0x0-0x0]
>pci_bus 0000:07: resource 1 mem: [0xf9f00000-0xf9ffffff]
>pci_bus 0000:07: resource 2 mem: [0x0-0x0]
>pci_bus 0000:07: resource 3 mem: [0x0-0x0]
>pci_bus 0000:01: resource 0 mem: [0x0-0x0]
>pci_bus 0000:01: resource 1 mem: [0x0-0x0]
>pci_bus 0000:01: resource 2 mem: [0x0-0x0]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1234742993.704:1): initialized
>fuse init (API version 7.11)
>msgmni has been set to 7930
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
>pci 0000:00:1a.0: Performing full reset
>pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1a.1: Performing full reset
>pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1a.2: Performing full reset
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1d.2: Performing full reset
>pci 0000:08:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/PNP0C09:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button (CM) [PWRB]
>ACPI: SSDT BFFA01C0, 0259 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>ACPI: SSDT BFFA04B0, 0594 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: SSDT BFFA00F0, 00CC (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>ACPI: SSDT BFFA0420, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>PPP generic driver version 2.4.2
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 30 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xffffc20000664000, 00:21:85:df:0b:6c, XID 38000000 IRQ 30
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
>iwlagn: Copyright(c) 2003-2008 Intel Corporation
>iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>iwlagn 0000:06:00.0: setting latency timer to 64
>iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
>iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:06:00.0: PCI INT A disabled
>wmaster0 (iwlagn): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>wlan0 (iwlagn): not using net_device_ops yet
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>Loading iSCSI transport class v2.0-870.
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff900 irq 31
>ata2: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff980 irq 31
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb00 irq 31
>ata6: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb80 irq 31
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: Optiarc DVD RW AD-7560S, SX01, max UDMA/100, ATAPI AN
>ata5.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560S  SX01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>ata6: SATA link down (SStatus 0 SControl 300)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8efec00
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29-rc5 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8eff000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29-rc5 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: detected 2 ports
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.0: Performing full reset
>uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>usb usb3: default language 0x0409
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29-rc5 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: detected 2 ports
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.1: Performing full reset
>uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
>usb usb4: default language 0x0409
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29-rc5 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: detected 2 ports
>uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.2: Performing full reset
>uhci_hcd 0000:00:1a.2: supports USB remote wakeup
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a400
>usb usb5: default language 0x0409
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29-rc5 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
>usb usb6: default language 0x0409
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.29-rc5 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>usb usb6: uevent
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>usb 6-0:1.0: uevent
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: power on to power good time: 2ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '007'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
>usb usb7: default language 0x0409
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.29-rc5 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>usb usb7: uevent
>usb usb7: usb_probe_device
>usb usb7: configuration #1 chosen from 1 choice
>usb usb7: adding 7-0:1.0 (config #1, interface 0)
>usb 7-0:1.0: uevent
>hub 7-0:1.0: usb_probe_interface
>hub 7-0:1.0: usb_probe_interface - got id
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>hub 7-0:1.0: standalone hub
>hub 7-0:1.0: no power switching (usb 1.0)
>hub 7-0:1.0: individual port over-current protection
>hub 7-0:1.0: power on to power good time: 2ms
>hub 7-0:1.0: local power source is good
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '008'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880
>usb usb8: default language 0x0409
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.29-rc5 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>usb usb8: uevent
>usb usb8: usb_probe_device
>usb usb8: configuration #1 chosen from 1 choice
>usb usb8: adding 8-0:1.0 (config #1, interface 0)
>usb 8-0:1.0: uevent
>hub 8-0:1.0: usb_probe_interface
>hub 8-0:1.0: usb_probe_interface - got id
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>hub 8-0:1.0: standalone hub
>hub 8-0:1.0: no power switching (usb 1.0)
>hub 8-0:1.0: individual port over-current protection
>hub 8-0:1.0: power on to power good time: 2ms
>hub 8-0:1.0: local power source is good
>hub 8-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Bluetooth: Generic Bluetooth USB driver ver 0.4
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>Marking TSC unstable due to TSC halts in idle
>sdhci-pci 0000:07:00.1: SDHCI controller found [197b:2382] (rev 0)
>sdhci-pci 0000:07:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:07:00.1: setting latency timer to 64
>Registered led device: mmc0
>mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA
>sdhci-pci 0000:07:00.2: SDHCI controller found [197b:2381] (rev 0)
>sdhci-pci 0000:07:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:07:00.2: Refusing to bind to secondary interface.
>sdhci-pci 0000:07:00.2: PCI INT A disabled
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.18a.
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 2: status 0501 change 0001
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
>ALSA device list:
>  #0: HDA Intel at 0xf8ef8000 irq 22
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>registered taskstats version 1
>hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
>hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
>hub 2-0:1.0: port 2 not reset yet, waiting 50ms
>Clocksource tsc unstable (delta = -161853310 ns)
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
>hub 6-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>usb 6-2: ep0 maxpacket = 32
>usb 6-2: skipped 1 descriptor after interface
>usb 6-2: skipped 1 descriptor after interface
>usb 6-2: default language 0x0409
>usb 6-2: New USB device found, idVendor=ffc0, idProduct=001f
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: Gaming II
>usb 6-2: Manufacturer: Areson
>usb 6-2: uevent
>usb 6-2: usb_probe_device
>usb 6-2: configuration #1 chosen from 1 choice
>usb 6-2: adding 6-2:1.0 (config #1, interface 0)
>usb 6-2:1.0: uevent
>usbhid 6-2:1.0: usb_probe_interface
>usbhid 6-2:1.0: usb_probe_interface - got id
>input: Areson Gaming II as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
>generic-usb 0003:FFC0:001F.0001: input,hidraw0: USB HID v10.01 Mouse [Areson Gaming II] on usb-0000:00:1d.0-2/input0
>usb 6-2: adding 6-2:1.1 (config #1, interface 1)
>usb 6-2:1.1: uevent
>usbhid 6-2:1.1: usb_probe_interface
>usbhid 6-2:1.1: usb_probe_interface - got id
>input: Areson Gaming II as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
>generic-usb 0003:FFC0:001F.0002: input,hidraw1: USB HID v10.01 Mouse [Areson Gaming II] on usb-0000:00:1d.0-2/input1
>drivers/usb/core/inode.c: creating file '002'
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>EXT3-fs: sda2: couldn't mount because of unsupported optional features (40).
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 961, dev sda2:8, commit interval 5 seconds
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda2 with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 504k freed
>usb usb3: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb7: suspend_rh (auto-stop)
>usb usb8: suspend_rh (auto-stop)
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1a.7: suspend root hub
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>hub 8-0:1.0: hub_suspend
>usb usb8: bus auto-suspend
>usb usb8: suspend_rh
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb 6-2: uevent
>usb 6-2:1.0: uevent
>usb 6-2:1.1: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>EXT4 FS on sda2, internal journal on sda2:8
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1883, dev sda4:8, commit interval 5 seconds
>EXT4 FS on sda4, internal journal on sda4:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda4 with ordered data mode
>Adding 2000084k swap on /dev/sda3.  Priority:-1 extents:1 across:2000084k 
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb 6-2: uevent
>usb 6-2:1.0: uevent
>usb 6-2:1.1: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:08:00.0: setting latency timer to 64
>[drm] Detected an NV50 generation card (0x096480a1)
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>[drm] BIT BIOS found
>[drm] Display Configuration Block version 4.0 found
>[drm] DCB header length 27, with 16 possible entries
>[drm] Raw DCB entry 0: 01000323 00010030
>[drm] Found 1 entries in DCB
>[drm] Detected a LVDS output
>[drm] Detected a LVDS connector
>[drm] Creating i2c bus with index 3
>------------[ cut here ]------------
>WARNING: at kernel/softirq.c:124 local_bh_enable+0x8f/0xb0()
>Hardware name: GX620
>Modules linked in: nouveau(+) drm
>Pid: 10, comm: work_on_cpu/0 Not tainted 2.6.29-rc5 #1
>Call Trace:
> <IRQ>  [<ffffffff810423ca>] warn_slowpath+0xea/0x160
> [<ffffffff8105c540>] ktime_get_ts+0x30/0x60
> [<ffffffff8105c57c>] ktime_get+0xc/0x50
> [<ffffffff8101ff75>] lapic_next_event+0x15/0x20
> [<ffffffff81063a46>] tick_dev_program_event+0x36/0xb0
> [<ffffffff8105c6c2>] hrtimer_interrupt+0x102/0x1a0
> [<ffffffff81048027>] irq_exit+0x47/0x90
> [<ffffffff8123ada1>] sprintf+0x51/0x60
> [<ffffffff8104822f>] local_bh_enable+0x8f/0xb0
> [<ffffffff81446b94>] sk_filter+0x44/0xa0
> [<ffffffff81454887>] netlink_broadcast+0x187/0x430
> [<ffffffff81235730>] kobject_uevent_env+0x360/0x420
> [<ffffffffa000bd6e>] drm_sysfs_hotplug_event+0x3e/0x60 [drm]
> [<ffffffffa005e5db>] nv50_connector_detect+0xfb/0x1b0 [nouveau]
> [<ffffffff8103bfd4>] rebalance_domains+0x374/0x5f0
> [<ffffffffa005ee4d>] nv50_connector_detect_all+0x2d/0x60 [nouveau]
> [<ffffffffa0043256>] nouveau_irq_handler+0x1b6/0xdd0 [nouveau]
> [<ffffffff81035bb0>] task_tick_fair+0xa0/0xf0
> [<ffffffff8104cba7>] run_timer_softirq+0x47/0x200
> [<ffffffff81089474>] handle_IRQ_event+0x34/0x70
> [<ffffffff8108ad91>] handle_fasteoi_irq+0x71/0xe0
> [<ffffffff8100f13e>] do_IRQ+0x7e/0x110
> [<ffffffff8100ce53>] ret_from_intr+0x0/0xa
> <EOI>  [<ffffffff8123b570>] delay_tsc+0x0/0x40
> [<ffffffffa005f805>] nv50_display_command+0x85/0xd0 [nouveau]
> [<ffffffffa005f874>] nv50_display_update+0x24/0x40 [nouveau]
> [<ffffffffa005fcec>] nv50_display_create+0x1bc/0x2b0 [nouveau]
> [<ffffffffa003d7d5>] nouveau_card_init+0x905/0x920 [nouveau]
> [<ffffffffa000a5ed>] drm_get_dev+0x3ed/0x560 [drm]
> [<ffffffff81054660>] do_work_for_cpu+0x0/0x20
> [<ffffffff8124a922>] local_pci_probe+0x12/0x20
> [<ffffffff8105466b>] do_work_for_cpu+0xb/0x20
> [<ffffffff81054777>] run_workqueue+0x67/0x120
> [<ffffffff810548cf>] worker_thread+0x9f/0x110
> [<ffffffff81058bc0>] autoremove_wake_function+0x0/0x30
> [<ffffffff81054830>] worker_thread+0x0/0x110
> [<ffffffff81054830>] worker_thread+0x0/0x110
> [<ffffffff81058797>] kthread+0x47/0x90
> [<ffffffff8100d47a>] child_rip+0xa/0x20
> [<ffffffff81058750>] kthread+0x0/0x90
> [<ffffffff8100d470>] child_rip+0x0/0x20
>---[ end trace f7c2bde979477717 ]---
>[drm] Found PLL limits table version 0x21
>[drm] Loading PLL limits for reg 0x00614100
>[drm] pll.vco1.minfreq: 250000
>[drm] pll.vco1.maxfreq: 500000
>[drm] pll.vco2.minfreq: 500000
>[drm] pll.vco2.maxfreq: 1000000
>[drm] pll.vco1.min_inputfreq: 4000
>[drm] pll.vco1.max_inputfreq: 27000
>[drm] pll.vco2.min_inputfreq: 14000
>[drm] pll.vco2.max_inputfreq: 75000
>[drm] pll.vco1.min_n: 20
>[drm] pll.vco1.max_n: 255
>[drm] pll.vco1.min_m: 1
>[drm] pll.vco1.max_m: 2
>[drm] pll.vco2.min_n: 14
>[drm] pll.vco2.max_n: 255
>[drm] pll.vco2.min_m: 1
>[drm] pll.vco2.max_m: 25
>[drm] pll.unk1c: 0
>[drm] pll.max_log2p_bias: 6
>[drm] pll.log2p_bias: 0
>[drm] pll.refclk: 27000
>[drm] Using preferred mode.
>[drm] Found PLL limits table version 0x21
>[drm] Loading PLL limits for reg 0x00614100
>[drm] pll.vco1.minfreq: 250000
>[drm] pll.vco1.maxfreq: 500000
>[drm] pll.vco2.minfreq: 500000
>[drm] pll.vco2.maxfreq: 1000000
>[drm] pll.vco1.min_inputfreq: 4000
>[drm] pll.vco1.max_inputfreq: 27000
>[drm] pll.vco2.min_inputfreq: 14000
>[drm] pll.vco2.max_inputfreq: 75000
>[drm] pll.vco1.min_n: 20
>[drm] pll.vco1.max_n: 255
>[drm] pll.vco1.min_m: 1
>[drm] pll.vco1.max_m: 2
>[drm] pll.vco2.min_n: 14
>[drm] pll.vco2.max_n: 255
>[drm] pll.vco2.min_m: 1
>[drm] pll.vco2.max_m: 25
>[drm] pll.unk1c: 0
>[drm] pll.max_log2p_bias: 6
>[drm] pll.log2p_bias: 0
>[drm] pll.refclk: 27000
>Console: switching to colour frame buffer device 210x65
>[drm] nv50drmfb initialised
>[drm] Initialized nouveau 0.0.12 libdrm-2.4.4-31-g084e143d0c82f5bf6 on minor 0
>[drm] Using preferred mode.
>[drm] Using preferred mode.
>[drm] A seemingly empty modeset encountered, this could be a bug.
>r8169: eth0: link up
>r8169: eth0: link up
>eth0: no IPv6 routers present
>[drm] Allocating FIFO number 2
>[drm] nouveau_fifo_alloc: initialised FIFO 2
>------------[ cut here ]------------
>WARNING: at arch/x86/mm/pat.c:730 track_pfn_vma_copy+0x18e/0x1a0()
>Hardware name: GX620
>Modules linked in: nouveau drm
>Pid: 5397, comm: X Tainted: G        W  2.6.29-rc5 #1
>Call Trace:
> [<ffffffff810423ca>] warn_slowpath+0xea/0x160
> [<ffffffff8123e6b0>] sg_init_table+0x20/0x50
> [<ffffffff8124306c>] swiotlb_virt_to_bus+0xc/0x20
> [<ffffffff81243ab8>] swiotlb_map_sg_attrs+0xa8/0x1b0
> [<ffffffff810acebd>] zone_statistics+0x7d/0x80
> [<ffffffff810a08ee>] get_page_from_freelist+0x55e/0x770
> [<ffffffff810a0ef3>] __alloc_pages_internal+0xf3/0x520
> [<ffffffff810af392>] follow_phys+0x122/0x180
> [<ffffffff8102f3de>] track_pfn_vma_copy+0x18e/0x1a0
> [<ffffffff8102fb12>] pte_alloc_one+0x22/0x30
> [<ffffffff810b3a1d>] copy_page_range+0x74d/0x760
> [<ffffffff81040442>] dup_mm+0x2c2/0x420
> [<ffffffff8104141d>] copy_process+0xe4d/0x1270
> [<ffffffff810418d0>] do_fork+0x90/0x410
> [<ffffffff8104e467>] do_sigaction+0x177/0x1c0
> [<ffffffff8104e57e>] sys_rt_sigaction+0x8e/0xd0
> [<ffffffff8100c803>] stub_clone+0x13/0x20
> [<ffffffff8100c49b>] system_call_fastpath+0x16/0x1b
>---[ end trace f7c2bde979477718 ]---
>------------[ cut here ]------------
>WARNING: at arch/x86/mm/pat.c:637 reserve_pfn_range+0x2bd/0x300()
>Hardware name: GX620
>Modules linked in: nouveau drm
>Pid: 5397, comm: X Tainted: G        W  2.6.29-rc5 #1
>Call Trace:
> [<ffffffff810423ca>] warn_slowpath+0xea/0x160
> [<ffffffffa001061c>] drm_ttm_bind+0x9c/0x100 [drm]
> [<ffffffffa001507b>] drm_bo_move_ttm+0xeb/0x100 [drm]
> [<ffffffffa0012345>] drm_bo_handle_move_mem+0x235/0x360 [drm]
> [<ffffffff81235ef3>] prio_tree_insert+0x213/0x290
> [<ffffffff810ac678>] vma_prio_tree_insert+0x28/0x110
> [<ffffffff810b6398>] vma_link+0x88/0xd0
> [<ffffffff810b7db0>] mmap_region+0x240/0x550
> [<ffffffff8102bfc0>] pagerange_is_ram+0x40/0x70
> [<ffffffff8102f0ed>] reserve_pfn_range+0x2bd/0x300
> [<ffffffffa0046600>] nouveau_gem_ioctl_cpu_prep+0xb0/0x110 [nouveau]
> [<ffffffff810b30b0>] vm_insert_pfn+0xa0/0x1a0
> [<ffffffffa000b382>] drm_bo_vm_fault+0x1a2/0x220 [drm]
> [<ffffffff810af646>] __do_fault+0x66/0x450
> [<ffffffff810b1976>] handle_mm_fault+0x1a6/0x7b0
> [<ffffffff810b096e>] unmap_vmas+0x35e/0x970
> [<ffffffff8102b794>] do_page_fault+0x334/0x990
> [<ffffffffa0004971>] drm_ioctl+0x11/0x20 [drm]
> [<ffffffff810ddfec>] vfs_ioctl+0x8c/0xb0
> [<ffffffff810de0a8>] do_vfs_ioctl+0x98/0x5b0
> [<ffffffff810b5bc3>] remove_vma+0x63/0x80
> [<ffffffff810b7008>] do_munmap+0x348/0x390
> [<ffffffff81580dbf>] page_fault+0x1f/0x30
>---[ end trace f7c2bde979477719 ]---
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 17 us
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR DMA_R_PROTECTION, nStatus:
>[drm] PGRAPH_ERROR - Ch 2/3 Class 0x8297 Mthd 0x15e0 Data 0x00000000:0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* magic set 1:
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408900: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408904: 0x7be77e2f
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408908: 0xd0ff7e9f
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x0040890c: 0x000037f7
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408910: 0x7bbf3fea
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e08: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e0c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e10: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e14: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e18: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e1c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e20: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e24: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* magic set 2:
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409900: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409904: 0x57fd4fd3
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409908: 0x6dcffe6e
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x0040990c: 0xc000f96e
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409910: 0xd5733765
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e08: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e0c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e10: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e14: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e18: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e1c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e20: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e24: 0x00000000
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 17 us
>[drm] nouveau_fifo_free: freeing fifo 2
>[drm] Using preferred mode.
>[drm] Using preferred mode.

Actions: View

Attachments on bug 20142: 22990 | 22991 | 23047

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.