Attachment 23420 Details for Bug 20316 – dmesg after running Xorg.

dmesg after running Xorg.

dmesg_afterCRASH (text/plain), 52.95 KB, created by David Heidelberg (okias) on 2009-03-01 14:30:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Heidelberg (okias)

Created: 2009-03-01 14:30:50 UTC

Size: 52.95 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.29-rc6 (root@sc-neo) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #1 SMP Tue Feb 24 23:06:36 CET 2009
>Command line: root=/dev/sda2 quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
> BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
> BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
> BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
> BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>last_pfn = 0x140000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xbff90 max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-00000000bff90000
> 0000000000 - 00bfe00000 page 2M
> 00bfe00000 - 00bff90000 page 4k
>kernel direct mapping tables up to bff90000 @ 10000-15000
>last_map_addr: bff90000 end: bff90000
>init_memory_mapping: 0000000100000000-0000000140000000
> 0100000000 - 0140000000 page 2M
>kernel direct mapping tables up to 140000000 @ 13000-19000
>last_map_addr: 140000000 end: 140000000
>ACPI: RSDP 000F9470, 0014 (r0 ACPIAM)
>ACPI: RSDT BFF90000, 0048 (r1 MSI_NB MEGABOOK 20081226 MSFT       97)
>ACPI: FACP BFF90200, 0084 (r1 122608 FACP1133 20081226 MSFT       97)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT BFF905C0, 7D0F (r1  1ADTS 1ADTS008        8 INTL 20051117)
>ACPI: FACS BFF9E000, 0040
>ACPI: APIC BFF90390, 006C (r1 122608 APIC1133 20081226 MSFT       97)
>ACPI: MCFG BFF90400, 003C (r1 122608 OEMMCFG  20081226 MSFT       97)
>ACPI: SLIC BFF90440, 0176 (r1 MSI_NB MEGABOOK 20081226 MSFT       97)
>ACPI: OEMB BFF9E040, 0072 (r1 122608 OEMB1133 20081226 MSFT       97)
>ACPI: HPET BFF985C0, 0038 (r1 122608 OEMHPET  20081226 MSFT       97)
>ACPI: ASF! BFF98600, 0099 (r32 LEGEND I865PASF        1 INTL 20051117)
>ACPI: GSCI BFF9E0C0, 2024 (r1 122608 GMCHSCI  20081226 MSFT       97)
>ACPI: SSDT BFFA0A50, 04F0 (r1  PmRef    CpuPm     3000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Bootmem setup node 0 0000000000000000-0000000140000000
>  NODE_DATA [0000000000014000 - 0000000000017fff]
>  bootmap [0000000000018000 -  000000000003ffff] pages 28
>(6 early reservations) ==> bootmem [0000000000 - 0140000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000af7838]    TEXT DATA BSS ==> [0000200000 - 0000af7838]
>  #3 [0000099000 - 0000100000]    BIOS reserved ==> [0000099000 - 0000100000]
>  #4 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>  #5 [0000013000 - 0000014000]          PGTABLE ==> [0000013000 - 0000014000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00140000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x00000099
>    0: 0x00000100 -> 0x000bff90
>    0: 0x00100000 -> 0x00140000
>On node 0 totalpages: 1048345
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2407 pages reserved
>  DMA zone: 1514 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767944 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>4 Processors exceeds NR_CPUS limit of 2
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000
>PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000
>PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
>PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 49152 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028018
>Policy zone: Normal
>Kernel command line: root=/dev/sda2 quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Fast TSC calibration using PIT
>Detected 2261.309 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 4060564k/5242880k available (5591k kernel code, 1049500k absent, 132816k reserved, 2334k data, 496k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.61 BogoMIPS (lpj=2261309)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>[ds] using Core 2/Atom configuration
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>ACPI: Core revision 20081204
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4521.76 BogoMIPS (lpj=2260881)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>[ds] using Core 2/Atom configuration
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (9044.38 BogoMIPS).
>net_namespace: 1720 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Enabling special treatment for EC from MSI.
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>DMAR: Forcing write-buffer flush capability
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
>pci 0000:00:1a.1: reg 20 io port: [0xa480-0xa49f]
>pci 0000:00:1a.2: reg 20 io port: [0xa400-0xa41f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8efec00-0xf8efefff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8ef8000-0xf8efbfff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
>pci 0000:00:1d.1: reg 20 io port: [0xac00-0xac1f]
>pci 0000:00:1d.2: reg 20 io port: [0xa880-0xa89f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8eff000-0xf8eff3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
>pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
>pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
>pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
>pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8eff800-0xf8efffff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf8eff400-0xf8eff4ff]
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:08:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
>pci 0000:08:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:08:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
>pci 0000:08:00.0: reg 24 io port: [0xec00-0xec7f]
>pci 0000:08:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff]
>pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfebfffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xf8fc0000-0xf8fdffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xf8f00000-0xf8ffffff]
>pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf9000000-0xf9dfffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xce000000-0xcfffffff]
>pci 0000:06:00.0: reg 10 64bit mmio: [0xf9efe000-0xf9efffff]
>pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:06:00.0: PME# disabled
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf9e00000-0xf9efffff]
>pci 0000:07:00.0: reg 10 32bit mmio: [0xf9fff800-0xf9ffffff]
>pci 0000:07:00.0: reg 14 32bit mmio: [0xf9fff400-0xf9fff47f]
>pci 0000:07:00.0: reg 20 32bit mmio: [0xf9fff000-0xf9fff07f]
>pci 0000:07:00.0: reg 24 32bit mmio: [0xf9ffec00-0xf9ffec7f]
>pci 0000:07:00.1: reg 10 32bit mmio: [0xf9ffe800-0xf9ffe8ff]
>pci 0000:07:00.2: reg 10 32bit mmio: [0xf9ffe400-0xf9ffe4ff]
>pci 0000:07:00.3: reg 10 32bit mmio: [0xf9ffe000-0xf9ffe0ff]
>pci 0000:07:00.4: reg 10 32bit mmio: [0xf9ffdc00-0xf9ffdcff]
>pci 0000:00:1c.5: bridge 32bit mmio: [0xf9f00000-0xf9ffffff]
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
>system 00:08: ioport range 0x4c0-0x4cf has been reserved
>system 00:08: ioport range 0x4d2-0x4ff has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:01.0:   IO window: 0xe000-0xefff
>pci 0000:00:01.0:   MEM window: 0xfa000000-0xfebfffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.0:   MEM window: 0xf8f00000-0xf8ffffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.1:   MEM window: 0xf9000000-0xf9dfffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000ce000000-0x000000cfffffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
>pci 0000:00:1c.3:   IO window: disabled
>pci 0000:00:1c.3:   MEM window: 0xf9e00000-0xf9efffff
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
>pci 0000:00:1c.5:   IO window: disabled
>pci 0000:00:1c.5:   MEM window: 0xf9f00000-0xf9ffffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:08: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:08: resource 1 mem: [0xfa000000-0xfebfffff]
>pci_bus 0000:08: resource 2 mem: [0xd0000000-0xdfffffff]
>pci_bus 0000:08: resource 3 mem: [0x0-0x0]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:02: resource 1 mem: [0xf8f00000-0xf8ffffff]
>pci_bus 0000:02: resource 2 mem: [0x0-0x0]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:03: resource 1 mem: [0xf9000000-0xf9dfffff]
>pci_bus 0000:03: resource 2 mem: [0xce000000-0xcfffffff]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:05: resource 0 mem: [0x0-0x0]
>pci_bus 0000:05: resource 1 mem: [0x0-0x0]
>pci_bus 0000:05: resource 2 mem: [0x0-0x0]
>pci_bus 0000:05: resource 3 mem: [0x0-0x0]
>pci_bus 0000:06: resource 0 mem: [0x0-0x0]
>pci_bus 0000:06: resource 1 mem: [0xf9e00000-0xf9efffff]
>pci_bus 0000:06: resource 2 mem: [0x0-0x0]
>pci_bus 0000:06: resource 3 mem: [0x0-0x0]
>pci_bus 0000:07: resource 0 mem: [0x0-0x0]
>pci_bus 0000:07: resource 1 mem: [0xf9f00000-0xf9ffffff]
>pci_bus 0000:07: resource 2 mem: [0x0-0x0]
>pci_bus 0000:07: resource 3 mem: [0x0-0x0]
>pci_bus 0000:01: resource 0 mem: [0x0-0x0]
>pci_bus 0000:01: resource 1 mem: [0x0-0x0]
>pci_bus 0000:01: resource 2 mem: [0x0-0x0]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1235949505.217:1): initialized
>fuse init (API version 7.11)
>msgmni has been set to 7930
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1a.0: Performing full reset
>pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1a.1: Performing full reset
>pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1a.2: Performing full reset
>pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1d.2: Performing full reset
>pci 0000:08:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: Using ACPI for slot detection.
>pciehp 0000:00:1c.5:pcie02: HPC vendor_id 8086 device_id 294a ss_vid 0 ss_did 0
>pciehp 0000:00:1c.5:pcie02: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/PNP0C09:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button (CM) [PWRB]
>acpi device:04: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input3
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: SSDT BFFA01C0, 0259 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>ACPI: SSDT BFFA04B0, 0594 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device1
>ACPI: SSDT BFFA00F0, 00CC (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>ACPI: SSDT BFFA0420, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device2
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>PPP generic driver version 2.4.2
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 30 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xffffc20000664000, 00:21:85:df:0b:6c, XID 38000000 IRQ 30
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
>iwlagn: Copyright(c) 2003-2008 Intel Corporation
>iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>iwlagn 0000:06:00.0: setting latency timer to 64
>iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x50
>iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:06:00.0: PCI INT A disabled
>wmaster0 (iwlagn): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>wlan0 (iwlagn): not using net_device_ops yet
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>Loading iSCSI transport class v2.0-870.
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff900 irq 31
>ata2: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff980 irq 31
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb00 irq 31
>ata6: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb80 irq 31
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: Optiarc DVD RW AD-7560S, SX01, max UDMA/100, ATAPI AN
>ata5.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560S  SX01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>ata6: SATA link down (SStatus 0 SControl 300)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8efec00
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29-rc6 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8eff000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29-rc6 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: detected 2 ports
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.0: Performing full reset
>uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>usb usb3: default language 0x0409
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29-rc6 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: detected 2 ports
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.1: Performing full reset
>uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
>usb usb4: default language 0x0409
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29-rc6 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: detected 2 ports
>uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.2: Performing full reset
>uhci_hcd 0000:00:1a.2: supports USB remote wakeup
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a400
>usb usb5: default language 0x0409
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29-rc6 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
>usb usb6: default language 0x0409
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.29-rc6 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>usb usb6: uevent
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>usb 6-0:1.0: uevent
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: power on to power good time: 2ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '007'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
>usb usb7: default language 0x0409
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.29-rc6 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>usb usb7: uevent
>usb usb7: usb_probe_device
>usb usb7: configuration #1 chosen from 1 choice
>usb usb7: adding 7-0:1.0 (config #1, interface 0)
>usb 7-0:1.0: uevent
>hub 7-0:1.0: usb_probe_interface
>hub 7-0:1.0: usb_probe_interface - got id
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>hub 7-0:1.0: standalone hub
>hub 7-0:1.0: no power switching (usb 1.0)
>hub 7-0:1.0: individual port over-current protection
>hub 7-0:1.0: power on to power good time: 2ms
>hub 7-0:1.0: local power source is good
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '008'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880
>usb usb8: default language 0x0409
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.29-rc6 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>usb usb8: uevent
>usb usb8: usb_probe_device
>usb usb8: configuration #1 chosen from 1 choice
>usb usb8: adding 8-0:1.0 (config #1, interface 0)
>usb 8-0:1.0: uevent
>hub 8-0:1.0: usb_probe_interface
>hub 8-0:1.0: usb_probe_interface - got id
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>hub 8-0:1.0: standalone hub
>hub 8-0:1.0: no power switching (usb 1.0)
>hub 8-0:1.0: individual port over-current protection
>hub 8-0:1.0: power on to power good time: 2ms
>hub 8-0:1.0: local power source is good
>hub 8-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Bluetooth: Generic Bluetooth USB driver ver 0.4
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:07:00.1: SDHCI controller found [197b:2382] (rev 0)
>sdhci-pci 0000:07:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:07:00.1: setting latency timer to 64
>Marking TSC unstable due to TSC halts in idle
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA
>sdhci-pci 0000:07:00.2: SDHCI controller found [197b:2381] (rev 0)
>sdhci-pci 0000:07:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:07:00.2: Refusing to bind to secondary interface.
>sdhci-pci 0000:07:00.2: PCI INT A disabled
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.18a.
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
>ALSA device list:
>  #0: HDA Intel at 0xf8ef8000 irq 22
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>Clocksource tsc unstable (delta = -117532288 ns)
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>registered taskstats version 1
>EXT3-fs: sda2: couldn't mount because of unsupported optional features (40).
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 962, dev sda2:8, commit interval 5 seconds
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda2 with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 496k freed
>usb usb3: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb6: suspend_rh (auto-stop)
>usb usb8: suspend_rh (auto-stop)
>usb usb7: suspend_rh (auto-stop)
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1a.7: suspend root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 6-0:1.0: hub_suspend
>usb usb6: bus auto-suspend
>usb usb6: suspend_rh
>hub 8-0:1.0: hub_suspend
>usb usb8: bus auto-suspend
>usb usb8: suspend_rh
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>EXT4 FS on sda2, internal journal on sda2:8
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1850, dev sda4:8, commit interval 5 seconds
>EXT4 FS on sda4, internal journal on sda4:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda4 with ordered data mode
>Adding 2000084k swap on /dev/sda3.  Priority:-1 extents:1 across:2000084k 
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>iwlagn 0000:06:00.0: irq 32 for MSI/MSI-X
>iwlagn 0000:06:00.0: firmware: requesting iwlwifi-5000-1.ucode
>iwlagn loaded firmware version 5.4.1.16
>wlan0: Trigger new scan to find an IBSS to join
>wlan0: Selected IBSS BSSID 8e:ff:0d:2b:ea:14 based on configured SSID
>wlan0: Trigger new scan to find an IBSS to join
>wlan0: Trigger new scan to find an IBSS to join
>wlan0: no IPv6 routers present
>wlan0: Creating new IBSS network, BSSID 36:9e:22:af:fe:25
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:08:00.0: setting latency timer to 64
>[drm] Detected an NV50 generation card (0x096480a1)
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm:nouveau_graph_trapped_channel] *ERROR* AIII, invalid/inactive channel id 128
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus:
>[drm] PGRAPH_ERROR - Ch -1/0 Class 0x0000 Mthd 0x0000 Data 0x00000000:0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* magic set 1:
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408900: 0x00000034
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408904: 0x7fef7e3f
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408908: 0xf8ff5edf
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x0040890c: 0x00003ff7
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408910: 0x7bbf3fee
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e08: 0x800c372c
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e0c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e10: 0x53f6d060
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e14: 0x000000fb
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e18: 0xc6454102
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e1c: 0x877def72
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e20: 0x05210f20
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e24: 0x0d31006e
>[drm:nv50_pgraph_irq_handler] *ERROR* magic set 2:
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409900: 0x0000006a
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409904: 0xd7fd4fd3
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409908: 0xedefde6e
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x0040990c: 0xc000fd6e
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409910: 0xd57b376d
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e08: 0x800a2f5c
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e0c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e10: 0x424d8500
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e14: 0x0000002d
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e18: 0xc51bbba2
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e1c: 0x9cff8fd3
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e20: 0x043c7632
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e24: 0x0d22014c
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>[drm] BIT BIOS found
>[drm] Display Configuration Block version 4.0 found
>[drm] DCB header length 27, with 16 possible entries
>[drm] Raw DCB entry 0: 01000323 00010030
>[drm] Found 1 entries in DCB
>[drm] Detected a LVDS output
>[drm] Detected a LVDS connector
>[drm] Creating i2c bus with index 3
>BUG: scheduling while atomic: udevd/3170/0x10010000
>Modules linked in: nouveau(+) drm
>CPU 1:
>Modules linked in: nouveau(+) drm
>Pid: 3170, comm: udevd Not tainted 2.6.29-rc6 #1 GX620
>RIP: 0010:[<ffffffff8102b6ed>]  [<ffffffff8102b6ed>] do_page_fault+0x27d/0x990
>RSP: 0000:ffff88013c563df8  EFLAGS: 00000206
>RAX: 00007fffffffefff RBX: ffff88013e199380 RCX: 0000000000000000
>RDX: 00007fffde17ac18 RSI: 0000000000000014 RDI: ffff88013c563f58
>RBP: ffffffff8100ce4e R08: 00007fffde17ac00 R09: 00007f33d617b2b8
>R10: 00007f33d617b000 R11: 0000000009691a75 R12: ffff88013c5946e0
>R13: ffff88013e199380 R14: 00007f33d5f69390 R15: 0000000000000000
>FS:  00007f33d615a6f0(0000) GS:ffff88013fc03e00(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 00007f33d5f68f10 CR3: 000000013abcb000 CR4: 00000000000006a0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Call Trace:
> [<ffffffff8102b7c8>] ? do_page_fault+0x358/0x990
> [<ffffffff8157327f>] ? page_fault+0x1f/0x30
> [<ffffffff8123c23d>] ? __put_user_4+0x1d/0x30
> [<ffffffff8157327f>] ? page_fault+0x1f/0x30
>------------[ cut here ]------------
>WARNING: at kernel/softirq.c:124 local_bh_enable+0x8f/0xb0()
>Hardware name: GX620
>Modules linked in: nouveau(+) drm
>Pid: 3170, comm: udevd Not tainted 2.6.29-rc6 #1
>Call Trace:
> <IRQ>  [<ffffffff8104234a>] warn_slowpath+0xea/0x160
> [<ffffffff8157327f>] page_fault+0x1f/0x30
> [<ffffffff8101094a>] print_trace_address+0x2a/0x70
> [<ffffffff8105638f>] __kernel_text_address+0x2f/0x60
> [<ffffffff8100ce4e>] common_interrupt+0xe/0x13
> [<ffffffff81010a50>] print_context_stack+0x70/0xe0
> [<ffffffff8100ce4e>] common_interrupt+0xe/0x13
> [<ffffffff8100f700>] dump_trace+0x100/0x2b0
> [<ffffffff8123b601>] sprintf+0x51/0x60
> [<ffffffff810481df>] local_bh_enable+0x8f/0xb0
> [<ffffffff8144b6a4>] sk_filter+0x44/0xa0
> [<ffffffff81459057>] netlink_broadcast+0x187/0x430
> [<ffffffff81235f90>] kobject_uevent_env+0x360/0x420
> [<ffffffffa000bd6e>] drm_sysfs_hotplug_event+0x3e/0x60 [drm]
> [<ffffffffa005f3ab>] nv50_connector_detect+0xfb/0x1b0 [nouveau]
> [<ffffffffa005fc1d>] nv50_connector_detect_all+0x2d/0x60 [nouveau]
> [<ffffffffa0043836>] nouveau_irq_handler+0x1b6/0xdd0 [nouveau]
> [<ffffffff8105bf5b>] hrtimer_get_next_event+0xdb/0xf0
> [<ffffffff8105bf5b>] hrtimer_get_next_event+0xdb/0xf0
> [<ffffffff810894e4>] handle_IRQ_event+0x34/0x70
> [<ffffffff8108ae01>] handle_fasteoi_irq+0x71/0xe0
> [<ffffffff8100f13e>] do_IRQ+0x7e/0x110
> [<ffffffff8100ce53>] ret_from_intr+0x0/0xa
> <EOI>  [<ffffffff8102b6ed>] do_page_fault+0x27d/0x990
> [<ffffffff8102b7c8>] do_page_fault+0x358/0x990
> [<ffffffff8157327f>] page_fault+0x1f/0x30
> [<ffffffff8123c23d>] __put_user_4+0x1d/0x30
> [<ffffffff8157327f>] page_fault+0x1f/0x30
>---[ end trace 05bb679f33e49bf0 ]---
>[drm] Found PLL limits table version 0x21
>[drm] Loading PLL limits for reg 0x00614100
>[drm] pll.vco1.minfreq: 250000
>[drm] pll.vco1.maxfreq: 500000
>[drm] pll.vco2.minfreq: 500000
>[drm] pll.vco2.maxfreq: 1000000
>[drm] pll.vco1.min_inputfreq: 4000
>[drm] pll.vco1.max_inputfreq: 27000
>[drm] pll.vco2.min_inputfreq: 14000
>[drm] pll.vco2.max_inputfreq: 75000
>[drm] pll.vco1.min_n: 20
>[drm] pll.vco1.max_n: 255
>[drm] pll.vco1.min_m: 1
>[drm] pll.vco1.max_m: 2
>[drm] pll.vco2.min_n: 14
>[drm] pll.vco2.max_n: 255
>[drm] pll.vco2.min_m: 1
>[drm] pll.vco2.max_m: 25
>[drm] pll.unk1c: 0
>[drm] pll.max_log2p_bias: 6
>[drm] pll.log2p_bias: 0
>[drm] pll.refclk: 27000
>[drm] Using preferred mode.
>[drm] Found PLL limits table version 0x21
>[drm] Loading PLL limits for reg 0x00614100
>[drm] pll.vco1.minfreq: 250000
>[drm] pll.vco1.maxfreq: 500000
>[drm] pll.vco2.minfreq: 500000
>[drm] pll.vco2.maxfreq: 1000000
>[drm] pll.vco1.min_inputfreq: 4000
>[drm] pll.vco1.max_inputfreq: 27000
>[drm] pll.vco2.min_inputfreq: 14000
>[drm] pll.vco2.max_inputfreq: 75000
>[drm] pll.vco1.min_n: 20
>[drm] pll.vco1.max_n: 255
>[drm] pll.vco1.min_m: 1
>[drm] pll.vco1.max_m: 2
>[drm] pll.vco2.min_n: 14
>[drm] pll.vco2.max_n: 255
>[drm] pll.vco2.min_m: 1
>[drm] pll.vco2.max_m: 25
>[drm] pll.unk1c: 0
>[drm] pll.max_log2p_bias: 6
>[drm] pll.log2p_bias: 0
>[drm] pll.refclk: 27000
>Console: switching to colour frame buffer device 210x65
>[drm] nv50drmfb initialised
>[drm] Initialized nouveau 0.0.12 libdrm-2.4.5-17-gab582f64fd54565f6 on minor 0
>[drm] Allocating FIFO number 2
>[drm] nouveau_fifo_alloc: initialised FIFO 2
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR LIMIT_COLOR, nStatus:
>[drm] PGRAPH_ERROR - Ch 2/3 Class 0x8297 Mthd 0x0ff8 Data 0x00000000:0x20000000
>[drm:nv50_pgraph_irq_handler] *ERROR* magic set 1:
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408900: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408904: 0x7fef7e3f
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408908: 0xf8ff5edf
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x0040890c: 0x00003ff7
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408910: 0x7bbf3fee
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e08: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e0c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e10: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e14: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e18: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e1c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e20: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00408e24: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* magic set 2:
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409900: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409904: 0xd7fd4fd3
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409908: 0xedefde6e
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x0040990c: 0xc000fd6e
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409910: 0xd57b376d
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e08: 0x80000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e0c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e10: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e14: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e18: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e1c: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e20: 0x00000000
>[drm:nv50_pgraph_irq_handler] *ERROR* 	0x00409e24: 0x00000000
>[drm:drm_unlocked_ioctl] *ERROR* ret = 86 -16
>[drm] nouveau_fifo_free: freeing fifo 2
>[drm] Allocating FIFO number 2
>[drm] nouveau_fifo_alloc: initialised FIFO 2
>[drm:drm_unlocked_ioctl] *ERROR* ret = 86 -16
>[drm] nouveau_fifo_free: freeing fifo 2
>[drm] Allocating FIFO number 2
>[drm] nouveau_fifo_alloc: initialised FIFO 2
>[drm:drm_unlocked_ioctl] *ERROR* ret = 86 -16
>[drm] nouveau_fifo_free: freeing fifo 2
>[drm] Allocating FIFO number 2
>[drm] nouveau_fifo_alloc: initialised FIFO 2
>[drm:drm_unlocked_ioctl] *ERROR* ret = 86 -16
>[drm] nouveau_fifo_free: freeing fifo 2
>[drm] Allocating FIFO number 2

Actions: View

Attachments on bug 20316: 23419 | 23420 | 23421

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.