Attachment 23564 Details for Bug 20497 – Xorg.0.log

Xorg.0.log

Xorg.0.log (text/plain), 27.31 KB, created by Peter Sääf on 2009-03-05 10:16:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Sääf

Created: 2009-03-05 10:16:52 UTC

Size: 27.31 KB

patch

obsolete

>
>This is a pre-release version of the X server from The X.Org Foundation.
>It is not supported in any way.
>Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
>Select the "xorg" product for bugs you find in this release.
>Before reporting bugs in pre-release versions please check the
>latest version in the X.Org Foundation git repository.
>See http://wiki.x.org/wiki/GitPage for git access instructions.
>
>X.Org X Server 1.6.99.1
>Release Date: (unreleased)
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.28-gentoo-r2 i686 
>Current Operating System: Linux darwin 2.6.28-gentoo-r2 #5 SMP PREEMPT Wed Feb 25 21:56:55 CET 2009 i686
>Build Date: 05 March 2009  05:50:03PM
> 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar  5 18:13:39 2009
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) ServerLayout "Layout0"
>(**) |-->Screen "Screen0" (0)
>(**) |   |-->Monitor "BENQ"
>(**) |   |-->Device "G92"
>(**) Option "StandbyTime" "0"
>(**) Option "SuspendTime" "0"
>(**) Option "OffTime" "0"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(**) FontPath set to:
>	/usr/share/fonts/misc/,
>	/usr/share/fonts/Type1/,
>	/usr/share/fonts/100dpi/,
>	/usr/share/fonts/75dpi/,
>	/usr/share/fonts/corefonts/,
>	/usr/share/fonts/dejavu/,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(**) Extension "Composite" is enabled
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Loader magic: 0x81d5ee0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 5.0
>	X.Org Server Extension : 2.0
>(--) using VT number 7
>
>(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8800 GTS 512 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "nouveau"
>(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
>(II) Module nouveau: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 0.0.10
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) NOUVEAU driver 
>(II) NOUVEAU driver for NVIDIA chipset families :
>	RIVA TNT    (NV04)
>	RIVA TNT2   (NV05)
>	GeForce 256 (NV10)
>	GeForce 2   (NV11, NV15)
>	GeForce 4MX (NV17, NV18)
>	GeForce 3   (NV20)
>	GeForce 4Ti (NV25, NV28)
>	GeForce FX  (NV3x)
>	GeForce 6   (NV4x)
>	GeForce 7   (G7x)
>	GeForce 8   (G8x)
>(II) Primary Device is: PCI 01@00:00:0
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(--) NOUVEAU(0): Chipset: "NVIDIA NV92"
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/lib/xorg/modules/libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) NOUVEAU(0): Initializing int10
>(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
>(--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3
>(**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
>(==) NOUVEAU(0): RGB weight 888
>(==) NOUVEAU(0): Default visual is TrueColor
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules/libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 5.0
>(==) NOUVEAU(0): Randr1.2 support enabled
>(==) NOUVEAU(0): Using HW cursor
>(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
>(--) NOUVEAU(0): MMIO registers at 0xFD000000
>(II) Loading sub module "dri"
>(II) LoadModule: "dri"
>(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
>(II) NOUVEAU(0): Loaded DRI module
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: drmOpenMinor returns 10
>drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>(II) NOUVEAU(0): [dri] Found DRI library version 1.3.0 and kernel module version 0.0.12
>(II) NOUVEAU(0): Initial CRTC_OWNER is 0
>(II) NOUVEAU(0): Attempting to load BIOS image from PROM
>(II) NOUVEAU(0): ... appears to be valid
>(II) NOUVEAU(0): BIT BIOS found
>(II) NOUVEAU(0): Bios version 62.92.16.00
>(WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported
>(II) NOUVEAU(0): Found Display Configuration Block version 4.0
>(!!) NOUVEAU(0): Raw DCB entry 0: 02000300 00000028
>(!!) NOUVEAU(0): Raw DCB entry 1: 01000302 00000030
>(!!) NOUVEAU(0): Raw DCB entry 2: 04011310 00000028
>(!!) NOUVEAU(0): Raw DCB entry 3: 02011312 00000030
>(!!) NOUVEAU(0): Raw DCB entry 4: 010223f1 00c0c080
>(--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xC0C3
>(EE) NOUVEAU(0): ========== unknown reg 0x00021414 ==========
>(EE) NOUVEAU(0): ========== unknown reg 0x000204CC ==========
>(II) NOUVEAU(0): I2C bus "DCB-I2C-2" initialized.
>(II) NOUVEAU(0): I2C device "DCB-I2C-2:init script device" registered at address 0x5C.
>(II) NOUVEAU(0): I2C device "DCB-I2C-2:init script device" removed.
>(--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xC47D
>(--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xD1EB
>(--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xD2EA
>(--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xD51A
>(EE) NOUVEAU(0): ========== unknown reg 0x00020000 ==========
>(EE) NOUVEAU(0): ========== unknown reg 0x00020004 ==========
>(EE) NOUVEAU(0): ========== unknown reg 0x00020074 ==========
>(II) NOUVEAU(0): NV50DispPreInit is called.
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(--) NOUVEAU(0): DCB entry 0: type: 0, i2c_index: 0, heads: 3, bus: 0, or: 2
>(II) NOUVEAU(0): I2C bus "DVI-0" initialized.
>(II) NOUVEAU(0): DAC-1 attached with index 0 to DVI-0
>(--) NOUVEAU(0): DCB entry 1: type: 2, i2c_index: 0, heads: 3, bus: 0, or: 1
>(II) NOUVEAU(0): SOR-0 attached with index 1 to DVI-0
>(--) NOUVEAU(0): DCB entry 2: type: 0, i2c_index: 1, heads: 3, bus: 1, or: 4
>(II) NOUVEAU(0): I2C bus "DVI-1" initialized.
>(II) NOUVEAU(0): DAC-2 attached with index 0 to DVI-1
>(--) NOUVEAU(0): DCB entry 3: type: 2, i2c_index: 1, heads: 3, bus: 1, or: 2
>(II) NOUVEAU(0): SOR-1 attached with index 1 to DVI-1
>(--) NOUVEAU(0): DCB entry 4: type: 1, i2c_index: 15, heads: 3, bus: 2, or: 1
>(II) NOUVEAU(0): I2C bus "TV-2" initialized.
>(II) NOUVEAU(0): Output DVI-0 using monitor section BENQ
>(II) NOUVEAU(0): Output DVI-1 has no monitor section
>(II) NOUVEAU(0): nv50_output_detect is called.
>(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
>(II) NOUVEAU(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
>(II) NOUVEAU(0): I2C device "DVI-0:DDC control interface" registered at address 0x6E.
>(II) NOUVEAU(0): Detected a Digital output on DVI-0
>(II) NOUVEAU(0): Found a suitable output, index 1
>(II) NOUVEAU(0): nv50_output_detect is called.
>(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
>(II) NOUVEAU(0): EDID vendor "BNQ", prod id 30427
>(II) NOUVEAU(0): Using EDID range info for horizontal sync
>(II) NOUVEAU(0): Using EDID range info for vertical refresh
>(II) NOUVEAU(0): Printing DDC gathered Modelines:
>(II) NOUVEAU(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync +vsync (74.0 kHz)
>(II) NOUVEAU(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
>(II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
>(II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
>(II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
>(II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
>(II) NOUVEAU(0): NV50ConnectorGetDDCModes is called.
>(II) NOUVEAU(0): EDID vendor "BNQ", prod id 30427
>(II) NOUVEAU(0): DVI-0: preferred mode is 1920x1200
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_mode_valid is called.
>(II) NOUVEAU(0): nv50_output_detect is called.
>(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
>(II) NOUVEAU(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
>(II) NOUVEAU(0): Using bios provided load value of 312
>(--) NOUVEAU(0): No Load present on DAC-2
>(II) NOUVEAU(0): Output DVI-0 connected
>(II) NOUVEAU(0): Output DVI-1 disconnected
>(II) NOUVEAU(0): Using user preference for initial modes
>(II) NOUVEAU(0): Output DVI-0 using initial mode 1920x1200
>(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
>(--) NOUVEAU(0): VideoRAM: 262144 kBytes
>(--) NOUVEAU(0): Virtual size is 1920x1920 (pitch 1920)
>(**) NOUVEAU(0):  Driver mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
>(II) NOUVEAU(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync +vsync (74.0 kHz)
>(**) NOUVEAU(0):  Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
>(II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
>(**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
>(II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
>(**) NOUVEAU(0):  Driver mode "1280x1024": 141.8 MHz (scaled from 0.0 MHz), 81.3 kHz, 76.0 Hz
>(II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
>(**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
>(II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(**) NOUVEAU(0):  Driver mode "1280x1024": 132.8 MHz (scaled from 0.0 MHz), 76.8 kHz, 72.0 Hz
>(II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
>(**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
>(II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
>(II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
>(II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
>(II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
>(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
>(II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
>(II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
>(II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
>(II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
>(II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
>(II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
>(II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
>(II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
>(II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(**) NOUVEAU(0):  Driver mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
>(II) NOUVEAU(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
>(**) NOUVEAU(0): Display dimensions: (520, 330) mm
>(**) NOUVEAU(0): DPI set to (93, 147)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules/libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) Loading sub module "exa"
>(II) LoadModule: "exa"
>(II) Loading /usr/lib/xorg/modules/libexa.so
>(II) Module exa: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 2.4.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) Loading sub module "shadowfb"
>(II) LoadModule: "shadowfb"
>(II) Loading /usr/lib/xorg/modules/libshadowfb.so
>(II) Module shadowfb: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(--) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: drmOpenMinor returns 10
>drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) NOUVEAU(0): [drm] framebuffer handle = 0xd0000000
>(II) NOUVEAU(0): [drm] added 1 reserved context for kernel
>(II) NOUVEAU(0): X context handle = 0x1
>(II) NOUVEAU(0): [drm] installed DRM signal handler
>(II) NOUVEAU(0): Allocated 128MiB VRAM for framebuffer + offscreen pixmaps, at offset 0x20000000
>(II) NOUVEAU(0): AGPGART: 32MiB available
>(II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
>(II) NOUVEAU(0): Opened GPU channel 2
>(II) NOUVEAU(0): NV50DispInit is called.
>(II) NOUVEAU(0): nv50_output_get_crtc is called.
>(II) NOUVEAU(0): NV50SorGetCurrentCrtc is called.
>(II) NOUVEAU(0): nv50_output_dpms is called with mode 3.
>(II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3.
>(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3.
>(II) NOUVEAU(0): nv50_output_get_crtc is called.
>(II) NOUVEAU(0): NV50DacGetCurrentCrtc is called.
>(II) NOUVEAU(0): nv50_output_dpms is called with mode 3.
>(II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3.
>(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3.
>(II) NOUVEAU(0): nv50_output_get_crtc is called.
>(II) NOUVEAU(0): NV50SorGetCurrentCrtc is called.
>(II) NOUVEAU(0): nv50_output_get_crtc is called.
>(II) NOUVEAU(0): NV50DacGetCurrentCrtc is called.
>(II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC0.
>(II) NOUVEAU(0): nv50_output_get_crtc is called.
>(II) NOUVEAU(0): NV50SorGetCurrentCrtc is called.
>(II) NOUVEAU(0): nv50_output_get_crtc is called.
>(II) NOUVEAU(0): NV50DacGetCurrentCrtc is called.
>(II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC1.
>(II) NOUVEAU(0): nv50_output_prepare is called.
>(II) NOUVEAU(0): nv50_crtc_prepare is called for CRTC0.
>(II) NOUVEAU(0): NV50DacModeSet is called.
>(II) NOUVEAU(0): Disconnecting DAC.
>(II) NOUVEAU(0): NV50DacModeSet is called.
>(II) NOUVEAU(0): Disconnecting DAC.
>(II) NOUVEAU(0): NV50SorModeSet is called.
>(II) NOUVEAU(0): Disconnecting SOR.
>(II) NOUVEAU(0): nv50_crtc_mode_set is called for CRTC0.
>(II) NOUVEAU(0): NV50CrtcModeSet is called for CRTC0.
>(II) NOUVEAU(0): NV50CrtcSetDither is called (no update).
>(II) NOUVEAU(0): NV50CrtcBlank is called (unblanked) for CRTC0.
>(II) NOUVEAU(0): nv50_output_mode_set is called.
>(II) NOUVEAU(0): NV50SorModeSet is called.
>(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 0.
>(II) NOUVEAU(0): NV50CrtcSetScale is called with mode 2 for CRTC0.
>(II) NOUVEAU(0): nv50_crtc_gamma_set is called for CRTC0.
>(II) NOUVEAU(0): NV50CrtcGammaSet is called for CRTC0.
>(II) NOUVEAU(0): nv50_crtc_commit is called for CRTC0.
>(II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC1.
>(II) NOUVEAU(0): NV50CrtcSetPixelClock is called for CRTC0.
>(II) NOUVEAU(0): NV50CrtcSetClockMode is called for CRTC0.
>(II) NOUVEAU(0): NV50SorSetClockMode is called.
>(II) NOUVEAU(0): nv50_output_commit is called.
>(II) NOUVEAU(0): nv50_output_dpms is called with mode 3.
>(II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3.
>(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3.
>(II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC1.
>(II) EXA(0): Offscreen pixmap area of 119472128 bytes
>(II) EXA(0): Driver registered support for the following operations:
>(II)         Solid
>(II)         Copy
>(II)         Composite (RENDER acceleration)
>(II)         UploadToScreen
>(II)         DownloadFromScreen
>(==) NOUVEAU(0): Backing store disabled
>(==) NOUVEAU(0): Silken mouse enabled
>(II) NOUVEAU(0): [DRI] installation complete
>(II) NOUVEAU(0): DPMS enabled
>(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
>(II) NOUVEAU(0): [XvMC] Extension initialized.
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: Screen 0 is not DRI2 capable
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: drmOpenMinor returns 11
>drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>(EE) AIGLX error: dlopen of /usr/lib/dri/nouveau_dri.so failed (/usr/lib/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
>(EE) AIGLX: reverting to software rendering
>(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
>(II) GLX: Initialized DRISWRAST GL provider for screen 0
>(II) NOUVEAU(0): Setting screen physical size to 507 x 317
>(II) config/hal: Adding input device Logitech USB Gaming Mouse
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.99.1, module version = 2.1.99
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 5.0
>(**) Logitech USB Gaming Mouse: always reports core events
>(**) Logitech USB Gaming Mouse: Device: "/dev/input/event4"
>(II) Logitech USB Gaming Mouse: Found 16 mouse buttons
>(II) Logitech USB Gaming Mouse: Found x and y relative axes
>(II) Logitech USB Gaming Mouse: Found scroll wheel(s)
>(II) Logitech USB Gaming Mouse: Configuring as mouse
>(**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
>(**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
>(**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
>(**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
>(**) Logitech USB Gaming Mouse: (accel) filter chain progression: 2.00
>(**) Logitech USB Gaming Mouse: (accel) filter stage 0: 20.00 ms
>(**) Logitech USB Gaming Mouse: (accel) set acceleration profile 0
>
>Backtrace:
>0: X(xorg_backtrace+0x3c) [0x809c79c]
>1: X(xf86SigHandler+0x52) [0x809f2d2]
>2: [0xb8087400]
>3: /usr/lib/xorg/modules/input/evdev_drv.so [0xae6df041]
>4: /usr/lib/xorg/modules/input/evdev_drv.so [0xae6e0ee5]
>5: X(ActivateDevice+0x51) [0x80bffc1]
>6: X [0x8149001]
>7: X(NewInputDeviceRequest+0x27b) [0x81493db]
>8: X [0x813a336]
>9: X [0x813a966]
>10: X [0x813aa47]
>11: X [0x813b068]
>12: X [0x8091468]
>13: X(WaitForSomething+0x54f) [0x8091acf]
>14: X [0x8082786]
>15: X [0x80658ad]
>16: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7cba725]
>17: X [0x8064d11]
>
>Fatal server error:
>Caught signal 11.  Server aborting
>
>
>Please consult the The X.Org Foundation support 
>	 at http://wiki.x.org
> for help. 
>Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>
>(II) UnloadModule: "evdev"
>(II) NOUVEAU(0): NVLeaveVT is called.
>(II) NOUVEAU(0): NV50DispShutdown is called.
>(II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC0.
>(II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC1.

Actions: View

Attachments on bug 20497: 23564

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.