Attachment 23578 Details for Bug 20503 – dmesg

dmesg

dmesg (text/plain), 15.09 KB, created by Marc Elser on 2009-03-06 00:29:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marc Elser

Created: 2009-03-06 00:29:58 UTC

Size: 15.09 KB

patch

obsolete

>:01.0: enabling device (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>bus: 00 index 0 io port: [0x00-0xffff]
>bus: 00 index 1 mmio: [0x000000-0xffffffff]
>bus: 02 index 0 io port: [0xd000-0xdfff]
>bus: 02 index 1 mmio: [0xdfd00000-0xdfdfffff]
>bus: 02 index 2 mmio: [0x60000000-0x63ffffff]
>bus: 02 index 3 io port: [0x00-0xffff]
>bus: 02 index 4 mmio: [0x000000-0xffffffff]
>bus: 03 index 0 io port: [0xd000-0xd0ff]
>bus: 03 index 1 io port: [0xd400-0xd4ff]
>bus: 03 index 2 mmio: [0x60000000-0x63ffffff]
>bus: 03 index 3 mmio: [0x64000000-0x67ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 667k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1236329360.193:1): initialized
>highmem bounce pool size: 64 pages
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NTFS driver 2.1.29 [Flags: R/W].
>msgmni has been set to 1744
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>pci 0000:00:02.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>lp: driver loaded but no devices found
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8200000, using 6144k, total 7872k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>fbcondecor: console 0 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 0
>fb0: VESA VGA frame buffer device
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /class/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input1
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input2
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (61 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>[drm] Initialized drm 1.1.0 20060810
>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>serial 0000:00:1e.3: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
>serial 0000:00:1e.3: PCI INT B disabled
>Floppy drive(s): fd0 is 1.44M
>Marking TSC unstable due to possible TSC halt in C2
>Clocksource tsc unstable (delta = -276052763 ns)
>floppy0: no floppy controllers found
>brd: module loaded
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 4
>PCI: setting IRQ 4 as level-triggered
>e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 4 (level, low) -> IRQ 4
>e100 0000:02:08.0: PME# disabled
>e100: eth0: e100_probe: addr 0xdfdfd000, irq 4, MAC addr 00:12:3f:15:a6:bb
>PPP generic driver version 2.4.2
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>piix 0000:00:1f.1: IDE port disabled
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xbfa0-0xbfa7
>Probing IDE interface ide0...
>hda: FUJITSU MHV2060AH, ATA DISK drive
>hdb: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdb: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-gd driver 1.18
>hda: max request size: 128KiB
>hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>ide-cd driver 5.00
>ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ieee1394: raw1394: /dev/raw1394 device initialized
>yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01a4]
>yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:01.0: TI: mfunc 0x00001002, devctl 0x64
>yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0468, PCI irq 11
>yenta_cardbus 0000:02:01.0: Socket status: 30000007
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
>Intel ISA PCIC probe: not found.
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.28-gentoo-r2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.28-gentoo-r2 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.28-gentoo-r2 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.28-gentoo-r2 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.28-gentoo-r2 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input3
>hdaps: supported laptop not found!
>hdaps: driver init failed (ret=-19)!
>Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>oprofile: using timer interrupt.
>Netfilter messages via NETLINK v0.30.
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Bridge firewalling registered
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211_crypt: registered algorithm 'WEP'
>Using IPI Shortcut mode
>input: AT Translated Set 2 keyboard as /class/input/input4
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>input: SynPS/2 Synaptics TouchPad as /class/input/input5
>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
>ReiserFS: hda3: using ordered data mode
>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda3: checking transaction log (hda3)
>usb 2-1: configuration #1 chosen from 1 choice
>usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3011
>usb 2-1: New USB device found, idVendor=03f0, idProduct=3011
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1: Product: psc 1100 series
>usb 2-1: Manufacturer: Hewlett-Packard
>usb 2-1: SerialNumber: MY38LF10BQB0
>ReiserFS: hda3: Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly.
>Freeing unused kernel memory: 276k freed
>intel_rng: FWH not detected
>intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
>intelfb: Version 0.9.6
>intelfb 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>intelfb: Cannot reserve FB region.
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>Intel ICH 0000:00:1e.2: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>intel8x0_measure_ac97_clock: measured 52720 usecs
>intel8x0: clocking to 48000
>ndiswrapper version 1.53 loaded (smp=no, preempt=no)
>ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
>ndiswrapper 0000:02:03.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
>ndiswrapper: using IRQ 5
>wlan0: ethernet device 00:14:a5:04:a0:c3 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4318.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>usbcore: registered new interface driver ndiswrapper
>loop: module loaded
>Adding 514072k swap on /dev/hda2.  Priority:-1 extents:1 across:514072k
>hda: UDMA/100 mode selected
>hdb: UDMA/33 mode selected
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>device eth0 entered promiscuous mode
>device tap0 entered promiscuous mode
>br0: port 2(tap0) entering learning state
>br0: port 1(eth0) entering learning state
>fbcondecor: console 1 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 1
>fbcondecor: console 2 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 2
>fbcondecor: console 3 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 3
>fbcondecor: console 4 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 4
>fbcondecor: console 5 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 5
>fbcondecor: console 6 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 6
>fbcondecor: console 7 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 7
>fbcondecor: console 8 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 8
>fbcondecor: console 9 using theme 'Emergance'
>br0: topology change detected, propagating
>br0: port 2(tap0) entering forwarding state
>br0: topology change detected, propagating
>br0: port 1(eth0) entering forwarding state
>fbcondecor: switched decor state to 'on' on console 9
>fbcondecor: console 10 using theme 'Emergance'
>fbcondecor: switched decor state to 'on' on console 10
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>[drm:i915_setparam] *ERROR* unknown parameter 4
>[drm:i915_getparam] *ERROR* Unknown parameter 6
>[drm:i915_getparam] *ERROR* Unknown parameter 6
>ndiswrapper (mp_set_power_state:375): wlan0 does not support power management; halting the device
>ndiswrapper: using IRQ 5
>ip_tables: (C) 2000-2006 Netfilter Core Team
>NET: Registered protocol family 4
>[drm:i915_getparam] *ERROR* Unknown parameter 6
>[drm:i915_getparam] *ERROR* Unknown parameter 6
>[drm:i915_getparam] *ERROR* Unknown parameter 6
>[drm:i915_getparam] *ERROR* Unknown parameter 6

Actions: View

Attachments on bug 20503: 23576 | 23577 | 23578 | 23579 | 23580

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.