Attachment 23587 Details for Bug 20414 – dmesg

dmesg

dmesg-2.6.29-rc7-pgzh.txt (text/plain), 41.50 KB, created by Peter Ganzhorn on 2009-03-06 07:31:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Ganzhorn

Created: 2009-03-06 07:31:00 UTC

Size: 41.50 KB

patch

obsolete

>Linux version 2.6.29-rc7-pgzh (root@orion) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP PREEMPT Fri Mar 6 16:08:42 CET 2009
>Command line: root=/dev/sda3 vga=normal raid=noautodetect
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000c7d80000 (usable)
> BIOS-e820: 00000000c7d80000 - 00000000c7d8e000 (ACPI data)
> BIOS-e820: 00000000c7d8e000 - 00000000c7dd0000 (ACPI NVS)
> BIOS-e820: 00000000c7dd0000 - 00000000c7e00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>last_pfn = 0x230000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 8GB, type WB
>reg 1, base: 8GB, range: 512MB, type WB
>reg 2, base: 8704MB, range: 256MB, type WB
>reg 3, base: 3328MB, range: 256MB, type UC
>reg 4, base: 3584MB, range: 512MB, type UC
>reg 5, base: 3198MB, range: 2MB, type UC
>reg 6, base: 3200MB, range: 128MB, type UC
>total RAM coverred: 8062M
> gran_size: 64K 	chunk_size: 64K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 64K 	chunk_size: 128K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 64K 	chunk_size: 256K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 64K 	chunk_size: 512K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 64K 	chunk_size: 1M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 64K 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 64K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 64K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 64K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 64K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 64K 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 64K 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -256M
> gran_size: 64K 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 64K 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1G
> gran_size: 128K 	chunk_size: 128K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 128K 	chunk_size: 256K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 128K 	chunk_size: 512K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 128K 	chunk_size: 1M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 128K 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 128K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 128K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 128K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 128K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 128K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 128K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 128K 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 128K 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -256M
> gran_size: 128K 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 128K 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1G
> gran_size: 256K 	chunk_size: 256K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 256K 	chunk_size: 512K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 256K 	chunk_size: 1M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 256K 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 256K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 256K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 256K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 256K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 256K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 256K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 256K 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 256K 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -256M
> gran_size: 256K 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 256K 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1G
> gran_size: 512K 	chunk_size: 512K 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 512K 	chunk_size: 1M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 512K 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 512K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 512K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 512K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 512K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 512K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 512K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 512K 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 512K 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -256M
> gran_size: 512K 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 512K 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1G
> gran_size: 1M 	chunk_size: 1M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 1M 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 1M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 1M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 1M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 1M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 1M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 1M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 1M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 1M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -256M
> gran_size: 1M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 1M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1G
> gran_size: 2M 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 4864M
> gran_size: 2M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 2M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 2M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 2M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 2M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 2M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
> gran_size: 2M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 2M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -256M
> gran_size: 2M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 0G
>*BAD*gran_size: 2M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1G
> gran_size: 4M 	chunk_size: 4M 	num_reg: 8  	lose cover RAM: 770M
> gran_size: 4M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 2M
> gran_size: 4M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 2M
> gran_size: 4M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 2M
> gran_size: 4M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 2M
> gran_size: 4M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 2M
> gran_size: 4M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 2M
>*BAD*gran_size: 4M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -254M
> gran_size: 4M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 2M
>*BAD*gran_size: 4M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1022M
> gran_size: 8M 	chunk_size: 8M 	num_reg: 8  	lose cover RAM: 262M
> gran_size: 8M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 6M
> gran_size: 8M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 6M
> gran_size: 8M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 6M
> gran_size: 8M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 6M
> gran_size: 8M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 6M
>*BAD*gran_size: 8M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -250M
> gran_size: 8M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 6M
>*BAD*gran_size: 8M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1018M
> gran_size: 16M 	chunk_size: 16M 	num_reg: 8  	lose cover RAM: 14M
> gran_size: 16M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 14M
> gran_size: 16M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 14M
> gran_size: 16M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 14M
> gran_size: 16M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 14M
>*BAD*gran_size: 16M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -242M
> gran_size: 16M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 14M
>*BAD*gran_size: 16M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -1010M
> gran_size: 32M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 30M
> gran_size: 32M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 30M
> gran_size: 32M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 30M
> gran_size: 32M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 30M
>*BAD*gran_size: 32M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -226M
> gran_size: 32M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 30M
>*BAD*gran_size: 32M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -994M
> gran_size: 64M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 62M
> gran_size: 64M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 62M
> gran_size: 64M 	chunk_size: 256M 	num_reg: 8  	lose cover RAM: 62M
>*BAD*gran_size: 64M 	chunk_size: 512M 	num_reg: 8  	lose cover RAM: -194M
> gran_size: 64M 	chunk_size: 1G 	num_reg: 8  	lose cover RAM: 62M
>*BAD*gran_size: 64M 	chunk_size: 2G 	num_reg: 8  	lose cover RAM: -962M
> gran_size: 128M 	chunk_size: 128M 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 128M 	chunk_size: 256M 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 128M 	chunk_size: 512M 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 128M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 128M 	chunk_size: 2G 	num_reg: 6  	lose cover RAM: 126M
> gran_size: 256M 	chunk_size: 256M 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 256M 	chunk_size: 512M 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 256M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 126M
> gran_size: 256M 	chunk_size: 2G 	num_reg: 6  	lose cover RAM: 126M
> gran_size: 512M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 382M
> gran_size: 512M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 382M
> gran_size: 512M 	chunk_size: 2G 	num_reg: 6  	lose cover RAM: 382M
> gran_size: 1G 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 894M
> gran_size: 1G 	chunk_size: 2G 	num_reg: 3  	lose cover RAM: 894M
> gran_size: 2G 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 1918M
>mtrr_cleanup: can not find optimal value
>please specify mtrr_gran_size/mtrr_chunk_size
>last_pfn = 0xc7d80 max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-00000000c7d80000
> 0000000000 - 00c7c00000 page 2M
> 00c7c00000 - 00c7d80000 page 4k
>kernel direct mapping tables up to c7d80000 @ 10000-16000
>last_map_addr: c7d80000 end: c7d80000
>init_memory_mapping: 0000000100000000-0000000230000000
> 0100000000 - 0230000000 page 2M
>kernel direct mapping tables up to 230000000 @ 14000-1e000
>last_map_addr: 230000000 end: 230000000
>ACPI: RSDP 000FB9D0, 0024 (r2 ACPIAM)
>ACPI: XSDT C7D80100, 0064 (r1 A_M_I_ OEMXSDT  11000826 MSFT       97)
>ACPI: FACP C7D80290, 00F4 (r3 A_M_I_ OEMFACP  11000826 MSFT       97)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT C7D80440, 90C6 (r1  A0982 A0982061       61 INTL 20060113)
>ACPI: FACS C7D8E000, 0040
>ACPI: APIC C7D80390, 006C (r1 A_M_I_ OEMAPIC  11000826 MSFT       97)
>ACPI: MCFG C7D80400, 003C (r1 A_M_I_ OEMMCFG  11000826 MSFT       97)
>ACPI: OEMB C7D8E040, 0089 (r1 A_M_I_ AMI_OEM  11000826 MSFT       97)
>ACPI: HPET C7D89510, 0038 (r1 A_M_I_ OEMHPET  11000826 MSFT       97)
>ACPI: GSCI C7D8E0D0, 2024 (r1 A_M_I_ GMCHSCI  11000826 MSFT       97)
>ACPI: OSFR C7D89550, 00B0 (r1 A_M_I_ OEMOSFR  11000826 MSFT       97)
>ACPI: SSDT C7D91070, 0A7C (r1 DpgPmm    CpuPm       12 INTL 20060113)
>ACPI: Local APIC address 0xfee00000
>(6 early reservations) ==> bootmem [0000000000 - 0230000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 00009c873c]    TEXT DATA BSS ==> [0000200000 - 00009c873c]
>  #3 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
>  #4 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
>  #5 [0000014000 - 0000019000]          PGTABLE ==> [0000014000 - 0000019000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002fdfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00230000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000c7d80
>    0: 0x00100000 -> 0x00230000
>On node 0 totalpages: 2063630
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2103 pages reserved
>  DMA zone: 1823 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 800184 pages, LIFO batch:31
>  Normal zone: 17024 pages used for memmap
>  Normal zone: 1228160 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at c8000000 (gap: c7e00000:37000000)
>NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Allocating 53248 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2030167
>Kernel command line: root=/dev/sda3 vga=normal raid=noautodetect
>Initializing CPU#0
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Preemptible RCU implementation.
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2838.836 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 8040172k/9175040k available (4740k kernel code, 920520k absent, 213700k reserved, 2164k data, 388k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5677.67 BogoMIPS (lpj=2838836)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Freeing SMP alternatives: 31k freed
>ACPI: Core revision 20081204
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5705.47 BogoMIPS (lpj=2852739)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x2 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5676.95 BogoMIPS (lpj=2838479)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU2: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x3 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5676.95 BogoMIPS (lpj=2838476)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU3: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (22737.06 BogoMIPS).
>net_namespace: 1376 bytes
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10784.000 MB/sec
>xor: using function: generic_sse (10784.000 MB/sec)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
>pci 0000:00:1a.0: reg 20 io port: [0xd480-0xd49f]
>pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]
>pci 0000:00:1a.2: reg 20 io port: [0xd880-0xd89f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8fb000-0xfe8fb3ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xd000-0xd01f]
>pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]
>pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8fa000-0xfe8fa3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>pci 0000:00:1f.2: reg 10 io port: [0xc880-0xc887]
>pci 0000:00:1f.2: reg 14 io port: [0xc800-0xc803]
>pci 0000:00:1f.2: reg 18 io port: [0xc480-0xc487]
>pci 0000:00:1f.2: reg 1c io port: [0xc400-0xc403]
>pci 0000:00:1f.2: reg 20 io port: [0xc080-0xc09f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe8f8000-0xfe8f87ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8f9000-0xfe8f90ff]
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
>pci 0000:01:00.0: reg 10 io port: [0xe800-0xe8ff]
>pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
>pci 0000:01:00.0: reg 20 64bit mmio: [0xfdef0000-0xfdefffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
>pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
>pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
>pci 0000:03:00.0: reg 10 32bit mmio: [0xfebffc00-0xfebffdff]
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - D5, should be D4 [20081204]
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:06: ioport range 0x290-0x29f has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x800-0x87f has been reserved
>system 00:07: ioport range 0x500-0x57f could not be reserved
>system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
>system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0xc7dfffff could not be reserved
>system 00:0f: iomem range 0xe0000000-0xffffffff could not be reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.5:   IO window: 0xe000-0xefff
>pci 0000:00:1c.5:   MEM window: 0xfea00000-0xfeafffff
>pci 0000:00:1c.5:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 mem: [0x0-0x0]
>pci_bus 0000:02: resource 1 mem: [0x0-0x0]
>pci_bus 0000:02: resource 2 mem: [0xfdf00000-0xfdffffff]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
>pci_bus 0000:01: resource 2 mem: [0xfde00000-0xfdefffff]
>pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 mem: [0x0-0x0]
>pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:03: resource 2 mem: [0x0-0x0]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>fuse init (API version 7.11)
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>msgmni has been set to 15704
>alg: No test for stdrng (krng)
>alg: No test for stdrng (ansi_cprng)
>async_tx: api initialized (sync-only)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: irq 25 for MSI/MSI-X
>input: Power Button (FF) as /class/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: SSDT C7D90100, 0235 (r1 DpgPmm  P001Ist       11 INTL 20060113)
>ACPI: SSDT C7D90A00, 04B2 (r1  PmRef  P001Cst     3001 INTL 20060113)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: SSDT C7D90340, 0235 (r1 DpgPmm  P002Ist       12 INTL 20060113)
>ACPI: SSDT C7D90EC0, 0085 (r1  PmRef  P002Cst     3000 INTL 20060113)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: SSDT C7D90580, 0235 (r1 DpgPmm  P003Ist       12 INTL 20060113)
>ACPI: SSDT C7D90F50, 0085 (r1  PmRef  P003Cst     3000 INTL 20060113)
>ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:02: registered as cooling_device2
>ACPI: SSDT C7D907C0, 0235 (r1 DpgPmm  P004Ist       12 INTL 20060113)
>ACPI: SSDT C7D90FE0, 0085 (r1  PmRef  P004Cst     3000 INTL 20060113)
>ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:03: registered as cooling_device3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
>agpgart-intel 0000:00:00.0: detected 131068K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm] MTRR allocation failed
>.  Graphics performance may suffer.
>pci 0000:00:02.0: irq 26 for MSI/MSI-X
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>allocated 1920x1200 fb: 0x08020000, bo ffff88022eb80840
>[drm] TMDS-8: set mode 1920x1200 1f
>Console: switching to colour frame buffer device 240x75
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>loop: module loaded
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:01:00.0: setting latency timer to 64
>r8169 0000:01:00.0: irq 27 for MSI/MSI-X
>r8169 0000:01:00.0: MAC address found in EEPROM: 00:22:15:98:31:dd
>eth0: RTL8168c/8111c at 0xffffc2000006a000, 00:22:15:98:31:dd, XID 3c4000c0 IRQ 27
>Linux video capture interface: v2.00
>saa7146: register extension 'dvb'.
>dvb 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
>saa7146: found saa7146 @ mem ffffc20000078c00 (revision 1, irq 16) (0x13c2,0x0003).
>DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X)
>adapter has MAC addr = 00:d0:5c:20:eb:80
>dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app c0f12623
>dvb-ttpci: firmware @ card 0 supports CI link layer interface
>dvb-ttpci: Crystal audio DAC @ card 0 detected
>saa7146_vv: saa7146 (0): registered device video0 [v4l2]
>saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
>DVB: Unable to find symbol ves1x93_attach()
>DVB: registering adapter 0 frontend -1 (ST STV0299 DVB-S)...
>input: DVB on-card IR receiver as /class/input/input2
>dvb-ttpci: found av7110-0.
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8100 irq 28
>ata2: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8180 irq 28
>ata3: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8200 irq 28
>ata4: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8280 irq 28
>ata5: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8300 irq 28
>ata6: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8380 irq 28
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
>ata1.00: 72303840 sectors, multi 0: LBA48 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors: (37.0 GB/34.4 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors: (37.0 GB/34.4 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS15  IL00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
>ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
>ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
>ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata5.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 4:0:0:0: [sdd] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>ata6: SATA link down (SStatus 0 SControl 300)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fb000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fa000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d480
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: Device needs an ACPI driver
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>coretemp coretemp.2: Using relative temperature scale!
>coretemp coretemp.3: Using relative temperature scale!
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>md: raid10 personality registered for level 10
>raid6: int64x1   2351 MB/s
>raid6: int64x2   3253 MB/s
>raid6: int64x4   3222 MB/s
>raid6: int64x8   2402 MB/s
>raid6: sse2x1    4660 MB/s
>raid6: sse2x2    5339 MB/s
>raid6: sse2x4    8074 MB/s
>raid6: using algorithm sse2x4 (8074 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.18a.
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>logips2pp: Detected unknown logitech mouse model 106
>ALSA device list:
>  #0: HDA Intel at 0xfe8f4000 irq 22
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>rtc_cmos 00:03: setting system clock to 2009-03-06 15:18:54 UTC (1236352734)
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
>usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
>md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
>UDF-fs: No VRS found
>XFS mounting filesystem sda3
>usb 8-2: new low speed USB device using uhci_hcd and address 2
>usb 8-2: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input4
>generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2/input0
>input: Logitech Logitech USB Keyboard as /class/input/input5
>generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2/input1
>Ending clean XFS mount for filesystem: sda3
>VFS: Mounted root (xfs filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 388k freed
>md: md0 stopped.
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sdb1>
>raid5: device sdb1 operational as raid disk 0
>raid5: device sdd1 operational as raid disk 2
>raid5: device sdc1 operational as raid disk 1
>raid5: allocated 3218kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sdb1
> disk 1, o:1, dev:sdc1
> disk 2, o:1, dev:sdd1
> md0: unknown partition table
>Adding 1855496k swap on /dev/sda2.  Priority:-1 extents:1 across:1855496k 
>Filesystem "md0": Disabling barriers, trial barrier write failed
>XFS mounting filesystem md0
>Clocksource tsc unstable (delta = -76324592 ns)
>Ending clean XFS mount for filesystem: md0
>r8169: eth0: link up
>r8169: eth0: link up

Actions: View

Attachments on bug 20414: 23587 | 23588 | 23589 | 23590 | 24889

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.