Attachment 24046 Details for Bug 20608 – dmesg output

dmesg output

fedora10-x86_64-dmesg.txt (text/plain), 41.25 KB, created by Mukund Sivaraman on 2009-03-19 07:02:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mukund Sivaraman

Created: 2009-03-19 07:02:12 UTC

Size: 41.25 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.19-170.2.35.fc10.x86_64 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Feb 23 13:00:23 EST 2009
>Command line: ro root=UUID=f31a9fae-e2b7-4663-848b-7531615fb139 quiet nomodeset
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
> BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x7fed0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fed0000 page 4k
>kernel direct mapping tables up to 7fed0000 @ 8000-c000
>last_map_addr: 7fed0000 end: 7fed0000
>RAMDISK: 37c71000 - 37fef063
>ACPI: RSDP 000F6860, 0024 (r2 LENOVO)
>ACPI: XSDT 7FED1692, 0084 (r1 LENOVO TP-79        2007  LTP        0)
>ACPI: FACP 7FED1800, 00F4 (r3 LENOVO TP-79        2007 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
>ACPI: DSDT 7FED1C32, D1A1 (r1 LENOVO TP-79        2007 MSFT  100000E)
>ACPI: FACS 7FEF4000, 0040
>ACPI: SSDT 7FED19B4, 027E (r1 LENOVO TP-79        2007 MSFT  100000E)
>ACPI: ECDT 7FEDEDD3, 0052 (r1 LENOVO TP-79        2007 LNVO        1)
>ACPI: TCPA 7FEDEE25, 0032 (r2 LENOVO TP-79        2007 LNVO        1)
>ACPI: APIC 7FEDEE57, 0068 (r1 LENOVO TP-79        2007 LNVO        1)
>ACPI: MCFG 7FEDEEBF, 003C (r1 LENOVO TP-79        2007 LNVO        1)
>ACPI: HPET 7FEDEEFB, 0038 (r1 LENOVO TP-79        2007 LNVO        1)
>ACPI: BOOT 7FEDEFD8, 0028 (r1 LENOVO TP-79        2007  LTP        1)
>ACPI: SSDT 7FEF2697, 025F (r1 LENOVO TP-79        2007 INTL 20050513)
>ACPI: SSDT 7FEF28F6, 00A6 (r1 LENOVO TP-79        2007 INTL 20050513)
>ACPI: SSDT 7FEF299C, 04F7 (r1 LENOVO TP-79        2007 INTL 20050513)
>ACPI: SSDT 7FEF2E93, 01D8 (r1 LENOVO TP-79        2007 INTL 20050513)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fed0000
>Bootmem setup node 0 0000000000000000-000000007fed0000
>  NODE_DATA [000000000000a000 - 000000000001efff]
>  bootmap [000000000001f000 -  000000000002efdf] pages 10
>(6 early reservations) ==> bootmem [0000000000 - 007fed0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000a2f0cc]    TEXT DATA BSS ==> [0000200000 - 0000a2f0cc]
>  #3 [0037c71000 - 0037fef063]          RAMDISK ==> [0037c71000 - 0037fef063]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>found SMP MP-table at [ffff8800000f68a0] 000f68a0
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fed0
>On node 0 totalpages: 523887
>  DMA zone: 1744 pages, LIFO batch:0
>  DMA32 zone: 512780 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PERCPU: Allocating 65184 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514524
>Policy zone: DMA32
>Kernel command line: ro root=UUID=f31a9fae-e2b7-4663-848b-7531615fb139 quiet nomodeset
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 1994.981 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2054484k/2095936k available (3307k kernel code, 41064k reserved, 1840k data, 1296k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.96 BogoMIPS (lpj=1994981)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Using local APIC timer interrupts.
>APIC timer calibration result 10390528
>Detected 10.390 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.83 BogoMIPS (lpj=1994918)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 617460 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (7979.79 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=5904 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:09:49  Date: 03/19/09
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [ee400000, ee403fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f]
>PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f]
>PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f]
>PCI: 0000:00:1d.3 reg 20 io port: [1860, 187f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [ee404000, ee4043ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>PCI: 0000:00:1f.1 reg 20 io port: [1880, 188f]
>PCI: 0000:00:1f.2 reg 10 io port: [18c8, 18cf]
>PCI: 0000:00:1f.2 reg 14 io port: [18ac, 18af]
>PCI: 0000:00:1f.2 reg 18 io port: [18c0, 18c7]
>PCI: 0000:00:1f.2 reg 1c io port: [18a8, 18ab]
>PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
>PCI: 0000:00:1f.2 reg 24 32bit mmio: [ee404400, ee4047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
>PCI: 0000:01:00.0 reg 10 32bit mmio: [d8000000, dfffffff]
>PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
>PCI: 0000:01:00.0 reg 18 32bit mmio: [ee100000, ee10ffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
>PCI: bridge 0000:00:01.0 32bit mmio: [ee100000, ee1fffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [d8000000, dfffffff]
>PCI: 0000:02:00.0 reg 10 32bit mmio: [ee000000, ee01ffff]
>PCI: 0000:02:00.0 reg 18 io port: [3000, 301f]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
>PCI: bridge 0000:00:1c.0 32bit mmio: [ee000000, ee0fffff]
>PCI: 0000:03:00.0 reg 10 32bit mmio: [edf00000, edf00fff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.1 io port: [4000, 5fff]
>PCI: bridge 0000:00:1c.1 32bit mmio: [ec000000, edffffff]
>PCI: bridge 0000:00:1c.1 64bit mmio pref: [e4000000, e40fffff]
>PCI: bridge 0000:00:1c.2 io port: [6000, 7fff]
>PCI: bridge 0000:00:1c.2 32bit mmio: [e8000000, e9ffffff]
>PCI: bridge 0000:00:1c.2 64bit mmio pref: [e4100000, e41fffff]
>PCI: bridge 0000:00:1c.3 io port: [8000, 9fff]
>PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ebffffff]
>PCI: bridge 0000:00:1c.3 64bit mmio pref: [e4200000, e42fffff]
>PCI: 0000:15:00.0 reg 10 32bit mmio: [e4300000, e4300fff]
>pci 0000:15:00.0: supports D1
>pci 0000:15:00.0: supports D2
>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 io port: [a000, dfff]
>PCI: bridge 0000:00:1e.0 32bit mmio: [e4300000, e7ffffff]
>PCI: bridge 0000:00:1e.0 64bit mmio pref: [e0000000, e3ffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x2000-0x2fff
>pci 0000:00:01.0:   MEM window: 0xee100000-0xee1fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x4000-0x5fff
>pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x6000-0x7fff
>pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.3:   IO window: 0x8000-0x9fff
>pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
>pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
>pci 0000:15:00.0:   IO window: 0x00a000-0x00a0ff
>pci 0000:15:00.0:   IO window: 0x00a400-0x00a4ff
>pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
>pci 0000:15:00.0:   MEM window: 0x88000000-0x8bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
>pci 0000:00:1e.0:   IO window: 0xa000-0xdfff
>pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [2000, 2fff]
>bus: 01 index 1 mmio: [ee100000, ee1fffff]
>bus: 01 index 2 mmio: [d8000000, dfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [3000, 3fff]
>bus: 02 index 1 mmio: [ee000000, ee0fffff]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [4000, 5fff]
>bus: 03 index 1 mmio: [ec000000, edffffff]
>bus: 03 index 2 mmio: [e4000000, e40fffff]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [6000, 7fff]
>bus: 04 index 1 mmio: [e8000000, e9ffffff]
>bus: 04 index 2 mmio: [e4100000, e41fffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 0c index 0 io port: [8000, 9fff]
>bus: 0c index 1 mmio: [ea000000, ebffffff]
>bus: 0c index 2 mmio: [e4200000, e42fffff]
>bus: 0c index 3 mmio: [0, 0]
>bus: 15 index 0 io port: [a000, dfff]
>bus: 15 index 1 mmio: [e4300000, e7ffffff]
>bus: 15 index 2 mmio: [e0000000, e3ffffff]
>bus: 15 index 3 io port: [0, ffff]
>bus: 15 index 4 mmio: [0, ffffffffffffffff]
>bus: 16 index 0 io port: [a000, a0ff]
>bus: 16 index 1 io port: [a400, a4ff]
>bus: 16 index 2 mmio: [e0000000, e3ffffff]
>bus: 16 index 3 mmio: [88000000, 8bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3576k freed
>Simple Boot Flag at 0x35 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1237453789.462:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 4019
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1] registered
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: SSDT 7FEF1D36, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7FEF203D, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FEF1C6E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7FEF1FB8, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (43 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (41 C)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 16
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-7: HTS721010G9SA00, MCZIC10H, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZI PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
>ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, 1.01, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>isa bounce pool size: 16 pages
>scsi 4:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4247N 1.01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>Clocksource tsc unstable (delta = -156499525 ns)
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: New USB device found, idVendor=0483, idProduct=2016
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: Biometric Coprocessor
>usb 5-2: Manufacturer: STMicroelectronics
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 1:976:171
>Freeing unused kernel memory: 1296k freed
>Write protecting the kernel read-only data: 4752k
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:01:00.0: power state changed by ACPI to D0
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:01:00.0: setting latency timer to 64
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: 8192 avtab hash slots, 114639 rules.
>SELinux: 8192 avtab hash slots, 114639 rules.
>SELinux:  8 users, 11 roles, 2676 types, 121 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 114639 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1237453792.545:2): policy loaded auid=4294967295 ses=4294967295
>udevd version 127 started
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>thinkpad_acpi: ThinkPad ACPI Extras v0.21
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 79ETC0WW (2.00g), EC 79HT49WW-1.06
>thinkpad_acpi: Lenovo ThinkPad T60, model 2613HNU
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /devices/virtual/input/input7
>ACPI: AC Adapter [AC] (on-line)
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>ACPI: Error installing bay notify handler
>ACPI: Battery Slot [BAT0] (battery present)
>acpi device:03: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>acpi device:08: registered as cooling_device3
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input9
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: setting latency timer to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>iwl3945 0000:03:00.0: PCI INT A disabled
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>e1000e 0000:02:00.0: setting latency timer to 64
>0000:02:00.0: 0000:02:00.0: Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
>0000:02:00.0: 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
>usb 4-1: configuration #1 chosen from 1 choice
>0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:7c:87:e1
>0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input10
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1
>usb 4-1: New USB device found, idVendor=046d, idProduct=c043
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: USB-PS/2 Optical Mouse
>usb 4-1: Manufacturer: Logitech
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:2010
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>firmware: requesting intel-ucode/06-0f-06
>firmware: requesting intel-ucode/06-0f-06
>microcode: CPU0 updated from revision 0x48 to 0xc7, date = 03152007 
>microcode: CPU1 updated from revision 0x48 to 0xc7, date = 03152007 
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>firmware: requesting iwlwifi-3945-1.ucode
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: authenticate with AP 00:1f:33:02:51:4c
>wlan0: authenticated
>wlan0: associate with AP 00:1f:33:02:51:4c
>wlan0: RX AssocResp from 00:1f:33:02:51:4c (capab=0x411 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa033bf80
>vboxdrv: fAsync=1 offMin=0x95358 offMax=0x95358
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.1.4 (interface 0x000a0009).
>VBoxNetFlt: dbg - g_abExecMemory=ffffffffa04d6da0
>wlan0: no IPv6 routers present
>type=1400 audit(1237453823.534:3): avc:  denied  { search } for  pid=2283 comm="httpd" name="projects" dev=sda3 ino=4073084 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
>type=1400 audit(1237453823.557:4): avc:  denied  { getattr } for  pid=2283 comm="httpd" path="/home/muks/projects/banuweb" dev=sda3 ino=1122900 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
>mtrr: base(0xd8000000) is not aligned on a size(0x7ff8000) boundary
>[drm] Setting GART location based on new memory map
>[drm] Loading R500 Microcode
>[drm] Num pipes: 1
>[drm] writeback test succeeded in 1 usecs
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>fuse init (API version 7.9)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>wlan0: authenticate with AP 00:1f:33:02:51:4c
>wlan0: authenticated
>wlan0: associate with AP 00:1f:33:02:51:4c
>wlan0: RX ReassocResp from 00:1f:33:02:51:4c (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: deauthenticated
>wlan0: authenticate with AP 00:1f:33:02:51:4c
>wlan0: authenticated
>wlan0: associate with AP 00:1f:33:02:51:4c
>wlan0: RX ReassocResp from 00:1f:33:02:51:4c (capab=0x411 status=0 aid=1)
>wlan0: associated
>warning: `VBoxHeadless' uses 32-bit capabilities (legacy support in use)
>device wlan0 entered promiscuous mode
>CE: hpet increasing min_delta_ns to 15000 nsec
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Microsoft LifeChat LX-3000  as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.3/input/input11
>input,hidraw1: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:1d.0-1
>usb 2-1: New USB device found, idVendor=045e, idProduct=070f
>usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-1: Product: Microsoft LifeChat LX-3000 
>usbcore: registered new interface driver snd-usb-audio
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT

Actions: View

Attachments on bug 20608: 24046 | 24047

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.