Attachment 24173 Details for Bug 20115 – dmesg of 2.6.29 with KMS enabled

dmesg of 2.6.29 with KMS enabled

dmesg_KMS_2.6.29 (text/plain), 25.62 KB, created by Maximilian Engelhardt on 2009-03-23 19:04:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Maximilian Engelhardt

Created: 2009-03-23 19:04:29 UTC

Size: 25.62 KB

patch

obsolete

>Linux version 2.6.29 (maxi@koala) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 PREEMPT Tue Mar 24 02:35:10 CET 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>PAT WC disabled due to known CPU erratum.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
> BIOS-e820: 000000007dee0000 - 000000007deec000 (ACPI data)
> BIOS-e820: 000000007deec000 - 000000007df00000 (ACPI NVS)
> BIOS-e820: 000000007df00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x7dee0 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000F6050, 0014 (r0 ACER  )
>ACPI: RSDT 7DEE5A39, 0030 (r1 ACER   Wagtail  20020114  LTP        0)
>ACPI: FACP 7DEEBF2C, 0074 (r1 ACER   Wagtail  20020114 PTL        50)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 7DEE5A69, 64C3 (r1 ACER   Wagtail  20020114 MSFT  100000E)
>ACPI: FACS 7DEFCFC0, 0040
>ACPI: HPET 7DEEBFA0, 0038 (r1 ACER   Wagtail  20020114 PTL         0)
>ACPI: BOOT 7DEEBFD8, 0028 (r1 ACER   Wagtail  20020114  LTP        1)
>1126MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 00000000 - 377fe000
>  bootmap 00008000 - 0000ef00
>(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000100000 - 00007b8510]    TEXT DATA BSS ==> [0000100000 - 00007b8510]
>  #2 [00007b9000 - 00007bc000]    INIT_PG_TABLE ==> [00007b9000 - 00007bc000]
>  #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #5 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007dee0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007dee0
>On node 0 totalpages: 515711
>free_area_init_node: node 0, pgdat c06e2120, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2254 pages used for memmap
>  HighMem zone: 286228 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec10000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 511681
>Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29 root=/dev/sda1 ro resume=/dev/sda2
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Preemptible RCU implementation.
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Fast TSC calibration using PIT
>Detected 1395.444 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2038048k/2063232k available (4369k kernel code, 23864k reserved, 1728k data, 296k init, 1153928k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffed000 - 0xfffff000   (  72 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc06f8000 - 0xc0742000   ( 296 kB)
>      .data : 0xc0544779 - 0xc06f4958   (1728 kB)
>      .text : 0xc0100000 - 0xc0544779   (4369 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2790.88 BogoMIPS (lpj=5581776)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>[ds] using Pentium M configuration
>[ds] pebs not available
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 0k freed
>ACPI: Core revision 20081204
>ACPI: setting ELCR to 0200 (from 0c00)
>net_namespace: 996 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
>pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
>pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.1: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
>pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:02:02.0: reg 10 32bit mmio: [0xe0204000-0xe0205fff]
>pci 0000:02:02.0: supports D1 D2
>pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:02.0: PME# disabled
>pci 0000:02:04.0: reg 10 32bit mmio: [0xe0206000-0xe0207fff]
>pci 0000:02:04.0: supports D1 D2
>pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:04.0: PME# disabled
>pci 0000:02:06.0: reg 10 32bit mmio: [0xe0208000-0xe0208fff]
>pci 0000:02:06.0: supports D1 D2
>pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:06.0: PME# disabled
>pci 0000:02:06.1: reg 10 32bit mmio: [0xe0209000-0xe0209fff]
>pci 0000:02:06.1: supports D1 D2
>pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:06.1: PME# disabled
>pci 0000:02:07.0: reg 10 32bit mmio: [0xe020a000-0xe020a7ff]
>pci 0000:02:07.0: reg 14 32bit mmio: [0xe0200000-0xe0203fff]
>pci 0000:02:07.0: supports D1 D2
>pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:07.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe07fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>Expanded resource reserved due to conflict with Adapter ROM
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:04: ioport range 0x600-0x60f has been reserved
>system 00:04: ioport range 0x700-0x70f has been reserved
>system 00:04: ioport range 0x800-0x80f has been reserved
>system 00:04: ioport range 0x1000-0x107f has been reserved
>system 00:04: ioport range 0x1180-0x11bf has been reserved
>system 00:04: ioport range 0x1c0-0x1cf has been reserved
>system 00:04: ioport range 0xfe00-0xfe00 has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0x610-0x61f has been reserved
>system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
>system 00:04: iomem range 0xff800000-0xffbfffff has been reserved
>system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:04: iomem range 0x0-0x9ffff could not be reserved
>system 00:04: iomem range 0xe0000-0xfffff could not be reserved
>pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:06.0:   IO window: 0x003000-0x0030ff
>pci 0000:02:06.0:   IO window: 0x003400-0x0034ff
>pci 0000:02:06.0:   PREFETCH window: 0x88000000-0x8bffffff
>pci 0000:02:06.0:   MEM window: 0x94000000-0x97ffffff
>pci 0000:02:06.1: CardBus bridge, secondary bus 0000:07
>pci 0000:02:06.1:   IO window: 0x003800-0x0038ff
>pci 0000:02:06.1:   IO window: 0x003c00-0x003cff
>pci 0000:02:06.1:   PREFETCH window: 0x8c000000-0x8fffffff
>pci 0000:02:06.1:   MEM window: 0x98000000-0x9bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
>pci 0000:00:1e.0:   MEM window: 0xe0200000-0xe07fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x0000008fffffff
>pci 0000:00:1e.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>pci 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>pci 0000:02:06.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe07fffff]
>pci_bus 0000:02: resource 2 mem: [0x88000000-0x8fffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:03: resource 0 io:  [0x3000-0x30ff]
>pci_bus 0000:03: resource 1 io:  [0x3400-0x34ff]
>pci_bus 0000:03: resource 2 mem: [0x88000000-0x8bffffff]
>pci_bus 0000:03: resource 3 mem: [0x94000000-0x97ffffff]
>pci_bus 0000:07: resource 0 io:  [0x3800-0x38ff]
>pci_bus 0000:07: resource 1 io:  [0x3c00-0x3cff]
>pci_bus 0000:07: resource 2 mem: [0x8c000000-0x8fffffff]
>pci_bus 0000:07: resource 3 mem: [0x98000000-0x9bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x37 set to 0x1
>Machine check exception polling timer started.
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>NTFS driver 2.1.29 [Flags: R/W].
>fuse init (API version 7.11)
>msgmni has been set to 1728
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>fan PNP0C0B:01: registered as cooling_device1
>ACPI: Fan [FAN1] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device2
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (53 C)
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12b
>intel_rng: FWH not detected
>ppdev: user-space parallel port driver
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 855GM Chipset
>agpgart-intel 0000:00:00.0: detected 32636K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:02.0: setting latency timer to 64
>Switched to high resolution mode on CPU 0
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: VGA-1: no EDID data
>allocated 1400x1050 fb: 0x01fff000, bo f7246c60
>[drm] LVDS-8: set mode 1400x1050 d
>Console: switching to colour frame buffer device 175x65
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>serial 0000:00:1f.6: PCI INT B disabled
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>loop: module loaded
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:29:99:a7
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: power state changed by ACPI to D0
>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
>ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2: port disabled. ignoring.
>ohci1394 0000:02:07.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[e020a000-e020a7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ieee1394: raw1394: /dev/raw1394 device initialized
>eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
>yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0035]
>yenta_cardbus 0000:02:06.0: O2: res at 0x94/0xD4: 00/ea
>yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst
>yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 10
>yenta_cardbus 0000:02:06.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
>yenta_cardbus 0000:02:06.1: CardBus bridge found [1025:0035]
>yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 10
>yenta_cardbus 0000:02:06.1: Socket status: 30000410
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
>yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.18a.
>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>Marking TSC unstable due to TSC halts in idle
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00000d5d2d]
>pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
>pcmcia_socket pcmcia_socket1: cs: memory probe 0x88000000-0x8fffffff: excluding 0x88000000-0x8fffffff
>pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0200000-0xe07fffff: excluding 0xe0200000-0xe025ffff<6>usb 2-2: new low speed USB device using uhci_hcd and address 2
>
>pcmcia 1.0: pcmcia: registering new device pcmcia1.0
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
>generic-usb 0003:046D:C408.0001: input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-2/input0
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>intel8x0_measure_ac97_clock: measured 55872 usecs
>intel8x0: clocking to 48000
>Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
>ALSA device list:
>  #0: Intel 82801DB-ICH4 with ALC202 at irq 10
>  #1: Intel 82801DB-ICH4 Modem at irq 10
>GACT probability on
>Mirror/redirect action on
>netem: version 1.2
>u32 classifier
>    Performance counters on
>    input device check on 
>    Actions configured 
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
>xt_time: kernel timezone is -0000
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ClusterIP Version 0.8 loaded successfully
>arp_tables: (C) 2002 David S. Miller
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>ip6tnl0: Disabled Privacy Extensions
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Using IPI Shortcut mode
>usb 4-2: configuration #1 chosen from 1 choice
>hub 4-2:1.0: USB hub found
>hub 4-2:1.0: 3 ports detected
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
>Freeing unused kernel memory: 296k freed
>kjournald starting.  Commit interval 5 seconds
>Write protecting the kernel text: 4372k
>Write protecting the kernel read-only data: 1448k
>usb 4-2.3: new full speed USB device using uhci_hcd and address 3
>usb 4-2.3: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>Clocksource tsc unstable (delta = -281138745 ns)
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>p54pci 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
>p54pci 0000:02:04.0: firmware: requesting isl3886pci
>scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>phy0: p54 detected a LM86 firmware
>p54: rx_mtu reduced from 3240 to 2376
>phy0: FW rev 2.13.1.0 - Softmac protocol 5.5
>phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
>phy0: hwaddr 00:60:b3:91:45:5b, MAC:isl3890 RF:Frisbee
>wmaster0 (p54pci): not using net_device_ops yet
>phy0: Selected rate control algorithm 'minstrel'
>wlan0 (p54pci): not using net_device_ops yet
>Adding 2001880k swap on /dev/sda2.  Priority:-1 extents:1 across:2001880k 
>EXT3 FS on sda1, internal journal
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>isatap: Disabled Privacy Extensions
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
>eth0: no IPv6 routers present
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: VGA-1: no EDID data

Actions: View

Attachments on bug 20115: 22938 | 22939 | 22940 | 23220 | 24173 | 24174 | 25128 | 25129 | 25141 | 25142 | 25546 | 25547 | 25548 | 25549 | 26294 | 26295 | 26296 | 26297 | 27110 | 27119 | 27761 | 27771 | 27773 | 27780 | 27786 | 27810 | 27827 | 27828 | 27845 | 27855

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.