Attachment 24249 Details for Bug 20870 – dmesg output

dmesg output

l (text/plain), 29.37 KB, created by Yan-Fa Li on 2009-03-25 23:36:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yan-Fa Li

Created: 2009-03-25 23:36:38 UTC

Size: 29.37 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.29-gentoo (root@ra) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP PREEMPT Wed Mar 25 22:12:49 PDT 2009
>Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 vga=791
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
> BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
> BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS)
> BIOS-e820: 000000003ffe0000 - 0000000040100000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>last_pfn = 0x3ffa0 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping: 0000000000000000-000000003ffa0000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ffa0000 page 4k
>kernel direct mapping tables up to 3ffa0000 @ 10000-13000
>last_map_addr: 3ffa0000 end: 3ffa0000
>RAMDISK: 36a85000 - 37fef1be
>ACPI: RSDP 000F9F50, 0014 (r0 ACPIAM)
>ACPI: RSDT 3FFA0000, 0044 (r1 070708 RSDT1549 20080707 MSFT       97)
>ACPI: FACP 3FFA0200, 0084 (r1 070708 FACP1549 20080707 MSFT       97)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 3FFA04A0, 576F (r1  1AAAA 1AAAA000        0 INTL 20051117)
>ACPI: FACS 3FFAE000, 0040
>ACPI: APIC 3FFA0390, 0080 (r1 070708 APIC1549 20080707 MSFT       97)
>ACPI: MCFG 3FFA0410, 003C (r1 070708 OEMMCFG  20080707 MSFT       97)
>ACPI: WDRT 3FFA0450, 0047 (r1 070708 NV-WDRT  20080707 MSFT       97)
>ACPI: OEMB 3FFAE040, 0071 (r1 070708 OEMB1549 20080707 MSFT       97)
>ACPI: HPET 3FFA5C10, 0038 (r1 070708 OEMHPET0 20080707 MSFT       97)
>ACPI: NVHD 3FFAE0C0, 0554 (r1 070708  NVHDCP  20080707 MSFT       97)
>ACPI: SSDT 3FFAEB20, 0A7C (r1 DpgPmm    CpuPm       12 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>(6 early reservations) ==> bootmem [0000000000 - 003ffa0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 00006ecb3c]    TEXT DATA BSS ==> [0000200000 - 00006ecb3c]
>  #3 [0036a85000 - 0037fef1be]          RAMDISK ==> [0036a85000 - 0037fef1be]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ffa0
>On node 0 totalpages: 261935
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1362 pages reserved
>  DMA zone: 2565 pages, LIFO batch:0
>  DMA32 zone: 3527 pages used for memmap
>  DMA32 zone: 254425 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40100000:beb00000)
>NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Allocating 49152 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256990
>Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 vga=791
>Initializing CPU#0
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Preemptible RCU implementation.
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Fast TSC calibration using PIT
>Detected 3000.272 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1003888k/1048192k available (3126k kernel code, 452k absent, 43156k reserved, 1010k data, 388k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.54 BogoMIPS (lpj=3000272)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.64 BogoMIPS (lpj=2999822)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (12000.18 BogoMIPS).
>net_namespace: 1728 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
>pci 0000:00:03.1: reg 10 io port: [0x4900-0x493f]
>pci 0000:00:03.1: reg 20 io port: [0x4d00-0x4d3f]
>pci 0000:00:03.1: reg 24 io port: [0x4e00-0x4e3f]
>pci 0000:00:03.1: PME# supported from D3hot D3cold
>pci 0000:00:03.1: PME# disabled
>pci 0000:00:04.0: reg 10 32bit mmio: [0xfeaff000-0xfeafffff]
>pci 0000:00:04.0: supports D1 D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:04.1: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
>pci 0000:00:04.1: supports D1 D2
>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.1: PME# disabled
>pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf]
>pci 0000:00:09.0: reg 10 32bit mmio: [0xfeaf8000-0xfeafbfff]
>pci 0000:00:09.0: PME# supported from D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: reg 10 io port: [0xd480-0xd487]
>pci 0000:00:0e.0: reg 14 io port: [0xd400-0xd403]
>pci 0000:00:0e.0: reg 18 io port: [0xd080-0xd087]
>pci 0000:00:0e.0: reg 1c io port: [0xd000-0xd003]
>pci 0000:00:0e.0: reg 20 io port: [0xcc00-0xcc0f]
>pci 0000:00:0e.0: reg 24 32bit mmio: [0xfeafc000-0xfeafdfff]
>pci 0000:00:0f.0: reg 10 32bit mmio: [0xfeaf7000-0xfeaf7fff]
>pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc887]
>pci 0000:00:0f.0: reg 18 32bit mmio: [0xfeafe800-0xfeafe8ff]
>pci 0000:00:0f.0: reg 1c 32bit mmio: [0xfeafe400-0xfeafe40f]
>pci 0000:00:0f.0: supports D1 D2
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>pci 0000:00:0a.0: transparent bridge
>pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfebf0000-0xfebfffff]
>pci 0000:02:00.0: reg 20 io port: [0xe000-0xe0ff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.1: reg 10 64bit mmio: [0xfebec000-0xfebeffff]
>pci 0000:02:00.1: supports D1 D2
>pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:0b.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *7
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - B8, should be AF [20081204]
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x4000-0x407f has been reserved
>system 00:06: ioport range 0x4080-0x40ff has been reserved
>system 00:06: ioport range 0x4400-0x447f has been reserved
>system 00:06: ioport range 0x4480-0x44ff has been reserved
>system 00:06: ioport range 0x4800-0x487f has been reserved
>system 00:06: ioport range 0x4880-0x48ff has been reserved
>system 00:06: iomem range 0xfec80000-0x1fd93ffff could not be reserved
>system 00:06: iomem range 0xfed02000-0xfed03fff has been reserved
>system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved
>system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: ioport range 0xa00-0xa0f has been reserved
>system 00:0a: ioport range 0xa10-0xa1f has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:0a.0:   IO window: disabled
>pci 0000:00:0a.0:   MEM window: disabled
>pci 0000:00:0a.0:   PREFETCH window: disabled
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: 0xe000-0xefff
>pci 0000:00:0b.0:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:0b.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: disabled
>pci 0000:00:0c.0:   MEM window: disabled
>pci 0000:00:0c.0:   PREFETCH window: disabled
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: disabled
>pci 0000:00:0d.0:   MEM window: disabled
>pci 0000:00:0d.0:   PREFETCH window: disabled
>pci 0000:00:0a.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 mem: [0x0-0x0]
>pci_bus 0000:01: resource 1 mem: [0x0-0x0]
>pci_bus 0000:01: resource 2 mem: [0x0-0x0]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:02: resource 2 mem: [0xd0000000-0xdfffffff]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 mem: [0x0-0x0]
>pci_bus 0000:03: resource 1 mem: [0x0-0x0]
>pci_bus 0000:03: resource 2 mem: [0x0-0x0]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:04: resource 0 mem: [0x0-0x0]
>pci_bus 0000:04: resource 1 mem: [0x0-0x0]
>pci_bus 0000:04: resource 2 mem: [0x0-0x0]
>pci_bus 0000:04: resource 3 mem: [0x0-0x0]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 21928k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1238047957.574:1): initialized
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 2004
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:02:00.0: Boot video device
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:0d.0: setting latency timer to 64
>pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
>Linux agpgart interface v0.103
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 3072k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:0e.0: version 3.0
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>ahci 0000:00:0e.0: irq 27 for MSI/MSI-X
>ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio 
>ahci 0000:00:0e.0: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc100 irq 27
>ata2: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc180 irq 27
>ata3: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc200 irq 27
>ata4: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc280 irq 27
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: HDS722512VLSA80, V33OA6MA, max UDMA/100
>ata1.00: 241254720 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HDS722512VLSA80  V33O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL01, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H62N  CL01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-6: IC35L120AVV207-1, V24OA66A, max UDMA/100
>ata3.00: 241254720 sectors, multi 16: LBA48 
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      IC35L120AVV207-1 V24O PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 < sdb5 >
>sd 2:0:0:0: [sdb] Attached SCSI disk
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100, ATAPI AN
>ata4.00: configured for UDMA/100
>scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB04 PQ: 0 ANSI: 5
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 3:0:0:0: Attached scsi CD-ROM sr1
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>registered taskstats version 1
>Freeing unused kernel memory: 388k freed
>ata1: hard resetting link
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sda: detected capacity change from 0 to 123522416640
>pata_amd 0000:00:08.0: version 0.4.1
>pata_amd 0000:00:08.0: setting latency timer to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata6: port disabled. ignoring.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sr 3:0:0:0: Attached scsi generic sg3 type 5
>scsi: <fdomain> Detection failed (no card)
>GDT-HA: Storage RAID Controller Driver. Version: 3.05
>Fusion MPT base driver 3.04.07
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.07
>Fusion MPT FC Host driver 3.04.07
>Fusion MPT SAS Host driver 3.04.07
>3ware Storage Controller device driver for Linux v1.26.02.002.
>3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
>Compaq SMART2 Driver (v 2.6.0)
>HP CISS Driver (v 3.6.20)
>Adaptec aacraid driver 1.1-5[2456]-ms
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
>QLogic Fibre Channel HBA Driver: 8.03.00-k4
>Emulex LightPulse Fibre Channel SCSI driver 8.3.0
>Copyright(c) 2004-2008 Emulex.  All rights reserved.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:04.1: setting latency timer to 64
>ehci_hcd 0000:00:04.1: EHCI Host Controller
>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:04.1: debug port 1
>ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:04.1: irq 22, io mem 0xfeafec00
>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>uhci_hcd: USB Universal Host Controller Interface driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
>ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
>ohci_hcd 0000:00:04.0: setting latency timer to 64
>ohci_hcd 0000:00:04.0: OHCI Host Controller
>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:04.0: irq 21, io mem 0xfeaff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>sl811: driver sl811-hcd, 19 May 2005
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>usb 2-4: new full speed USB device using ohci_hcd and address 2
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>usb 2-4: configuration #1 chosen from 1 choice
>hub 2-4:1.0: USB hub found
>hub 2-4:1.0: 4 ports detected
>async_tx: api initialized (async)
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10924.000 MB/sec
>xor: using function: generic_sse (10924.000 MB/sec)
>raid6: int64x1   2679 MB/s
>raid6: int64x2   3292 MB/s
>raid6: int64x4   3402 MB/s
>raid6: int64x8   2164 MB/s
>raid6: sse2x1    4992 MB/s
>raid6: sse2x2    5367 MB/s
>raid6: sse2x4    8441 MB/s
>raid6: using algorithm sse2x4 (8441 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>usb 2-4.1: new low speed USB device using ohci_hcd and address 3
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>usb 2-4.1: configuration #1 chosen from 1 choice
>input: ATEN UC-10KM V1.3.121 as /class/input/input1
>generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN UC-10KM V1.3.121] on usb-0000:00:04.0-4.1/input0
>input: ATEN UC-10KM V1.3.121 as /class/input/input2
>generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN UC-10KM V1.3.121] on usb-0000:00:04.0-4.1/input1
>usb 2-4.4: new low speed USB device using ohci_hcd and address 4
>usb 2-4.4: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
>generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:04.0-4.4/input0
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /class/input/input6
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
>forcedeth 0000:00:0f.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
>forcedeth 0000:00:0f.0: setting latency timer to 64
>ACPI: SSDT 3FFAE620, 0277 (r1 DpgPmm  P001Ist       11 INTL 20051117)
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [P001] (supports 8 throttling states)
>ACPI: SSDT 3FFAE8A0, 0277 (r1 DpgPmm  P002Ist       12 INTL 20051117)
>processor ACPI_CPU:01: registered as cooling_device1
>rtc_cmos 00:08: RTC can wake from S4
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (30 C)
>forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:90:6b:01:91
>forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
>HDA Intel 0000:00:09.0: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
>HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
>HDA Intel 0000:00:09.0: setting latency timer to 64
>input: HDA NVidia Line In at Ext Rear Jack as /class/input/input7
>input: HDA NVidia Mic at Ext Rear Jack as /class/input/input8
>input: HDA NVidia Mic at Sep Front Jack as /class/input/input9
>input: HDA NVidia Speaker at Ext Rear Jack as /class/input/input10
>input: HDA NVidia Speaker at Ext Rear Jack as /class/input/input11
>input: HDA NVidia Speaker at Ext Rear Jack as /class/input/input12
>input: HDA NVidia Speaker at Ext Rear Jack as /class/input/input13
>input: HDA NVidia HP Out at Sep Front Jack as /class/input/input14
>ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
>HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEC] -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:02:00.1: setting latency timer to 64
>EXT3 FS on sda3, internal journal
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>w83627ehf: Found W83627DHG chip at 0xa10
>[drm] Initialized drm 1.1.0 20060810
>EXT4-fs: barriers enabled
>EXT4-fs warning: maximal mount count reached, running e2fsck is recommended
>kjournald2 starting: pid 13965, dev sdb5:8, commit interval 5 seconds
>EXT4 FS on sdb5, internal journal on sdb5:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sdb5 with ordered data mode
>Adding 3911816k swap on /dev/sda2.  Priority:-1 extents:1 across:3911816k 
>forcedeth 0000:00:0f.0: irq 28 for MSI/MSI-X
>eth0: no link during initialization.
>eth0: link up.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
>pci 0000:02:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
>X:16881 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>eth0: no IPv6 routers present
>platform microcode: firmware: requesting intel-ucode/06-17-0a
>platform microcode: firmware: requesting intel-ucode/06-17-0a
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>X:16881 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>nepomukservices[17669]: segfault at ffffffffffffffe8 ip 00007fc6ba06f0e1 sp 0000000040deb6e0 error 4 in libexiv2.so.4.0.0[7fc6b9fc0000+143000]
>X:16881 freeing invalid memtype d0000000-e0000000
>X:16881 freeing invalid memtype d0000000-e0000000
>mtrr: no MTRR for d0000000,10000000 found
>X:16881 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:16881 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining

Actions: View

Attachments on bug 20870: 24248 | 24249

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.