Attachment 24871 Details for Bug 21230 – dmesg after lid close/reopen

dmesg after lid close/reopen

dmesg.txt (text/plain), 35.76 KB, created by Saikat Guha on 2009-04-16 09:56:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Saikat Guha

Created: 2009-04-16 09:56:20 UTC

Size: 35.76 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.29.1-70.fc11.i586 (mockbuild@x86-1.fedora.phx.redhat.com) (gcc version 4.4.0 20090409 (Red Hat 4.4.0-0.32) (GCC) ) #1 SMP Mon Apr 13 14:00:43 EDT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>PAT WC disabled due to known CPU erratum.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005f6e0000 (usable)
> BIOS-e820: 000000005f6e0000 - 000000005f6f5000 (ACPI data)
> BIOS-e820: 000000005f6f5000 - 000000005f700000 (ACPI NVS)
> BIOS-e820: 000000005f700000 - 0000000060000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x5f6e0 max_arch_pfn = 0x100000
>original variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1GB, range: 512MB, type WB
>reg 2, base: 1527MB, range: 1MB, type UC
>reg 3, base: 1528MB, range: 8MB, type UC
>total RAM coverred: 1527M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1GB, range: 512MB, type WB
>reg 2, base: 1527MB, range: 1MB, type UC
>reg 3, base: 1528MB, range: 8MB, type UC
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 37cd2000 - 37fef8fb
>Allocated new RAMDISK: 00a0c000 - 00d298fb
>Move RAMDISK from 0000000037cd2000 - 0000000037fef8fa to 00a0c000 - 00d298fa
>ACPI: RSDP 000F6C90, 0024 (r2 IBM   )
>ACPI: XSDT 5F6E6254, 005C (r1 IBM    TP-75        1011  LTP        0)
>ACPI: FACP 5F6E6300, 00F4 (r3 IBM    TP-75        1011 IBM         1)
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
>ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 5F6E64E7, E8A6 (r1 IBM    TP-75        1011 MSFT  100000E)
>ACPI: FACS 5F6F6000, 0040
>ACPI: SSDT 5F6E64B4, 0033 (r1 IBM    TP-75        1011 MSFT  100000E)
>ACPI: ECDT 5F6F4D8D, 0052 (r1 IBM    TP-75        1011 IBM         1)
>ACPI: TCPA 5F6F4DDF, 0032 (r1 IBM    TP-75        1011 PTL         1)
>ACPI: APIC 5F6F4E11, 005A (r1 IBM    TP-75        1011 IBM         1)
>ACPI: MCFG 5F6F4E6B, 003E (r1 IBM    TP-75        1011 IBM         1)
>ACPI: BOOT 5F6F4FD8, 0028 (r1 IBM    TP-75        1011  LTP        1)
>ACPI: Local APIC address 0xfee00000
>642MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 00000000 - 373fe000
>  bootmap 00008000 - 0000ee80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000a07d5c]    TEXT DATA BSS ==> [0000400000 - 0000a07d5c]
>  #4 [0000a08000 - 0000a0c000]    INIT_PG_TABLE ==> [0000a08000 - 0000a0c000]
>  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #7 [0000a0c000 - 0000d298fb]      NEW RAMDISK ==> [0000a0c000 - 0000d298fb]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0005f6e0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0005f6e0
>On node 0 totalpages: 390783
>free_area_init_node: node 0, pgdat c08a4b80, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 1286 pages used for memmap
>  HighMem zone: 163292 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Allocating 40960 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387729
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 resume=/dev/VolGroup00/LogVol01 quiet rhgb 
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1496.179 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>allocated 7817600 bytes of page_cgroup
>please try cgroup_disable=memory option if you don't want
>Memory: 1531988k/1563520k available (3113k kernel code, 30200k reserved, 1884k data, 424k init, 658312k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc08e8000 - 0xc0952000   ( 424 kB)
>      .data : 0xc070a77a - 0xc08e1a18   (1884 kB)
>      .text : 0xc0400000 - 0xc070a77a   (3113 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.35 BogoMIPS (lpj=1496179)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20081204
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 18030 entries in 71 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
>Brought up 1 CPUs
>Total of 1 processors activated (2992.35 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=3228 bytes
>CPU0 attaching NULL sched-domain.
>net_namespace: 1064 bytes
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 10:30:00  Date: 04/16/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xa0080000-0xa00fffff]
>pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xa0000000-0xa003ffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0040000-0xa00403ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1e.2: reg 18 32bit mmio: [0xa0040800-0xa00409ff]
>pci 0000:00:1e.2: reg 1c 32bit mmio: [0xa0040400-0xa00404ff]
>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.2: PME# disabled
>pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.3: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
>pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15c0-15cf
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:02:00.0: reg 10 64bit mmio: [0xa0100000-0xa010ffff]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge 32bit mmio: [0xa0100000-0xa01fffff]
>pci 0000:04:00.0: reg 10 32bit mmio: [0xa0200000-0xa0200fff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:04:00.1: reg 10 32bit mmio: [0xa0201000-0xa02010ff]
>pci 0000:04:00.1: supports D1 D2
>pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.1: PME# disabled
>pci 0000:04:02.0: reg 10 32bit mmio: [0xa0202000-0xa0202fff]
>pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:04:02.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x3000-0x6fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xa0200000-0xafffffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x162f has been reserved
>system 00:02: ioport range 0x1632-0x167f has been reserved
>system 00:02: ioport range 0x15c0-0x15df has been reserved
>system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xa0100000-0xa01fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:04:00.0: CardBus bridge, secondary bus 0000:05
>pci 0000:04:00.0:   IO window: 0x003000-0x0030ff
>pci 0000:04:00.0:   IO window: 0x003400-0x0034ff
>pci 0000:04:00.0:   PREFETCH window: 0xd0000000-0xd3ffffff
>pci 0000:04:00.0:   MEM window: 0xa4000000-0xa7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: 0x3000-0x6fff
>pci 0000:00:1e.0:   MEM window: 0xa0200000-0xafffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 mem: [0x0-0x0]
>pci_bus 0000:02: resource 1 mem: [0xa0100000-0xa01fffff]
>pci_bus 0000:02: resource 2 mem: [0x0-0x0]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:04: resource 0 io:  [0x3000-0x6fff]
>pci_bus 0000:04: resource 1 mem: [0xa0200000-0xafffffff]
>pci_bus 0000:04: resource 2 mem: [0xd0000000-0xd7ffffff]
>pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:05: resource 0 io:  [0x3000-0x30ff]
>pci_bus 0000:05: resource 1 io:  [0x3400-0x34ff]
>pci_bus 0000:05: resource 2 mem: [0xd0000000-0xd3ffffff]
>pci_bus 0000:05: resource 3 mem: [0xa4000000-0xa7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3190k freed
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1239877799.737:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1714
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (62 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial 00:09: activated
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>00:0c: ttyS1 at I/O 0x200 (irq = 5) is a NS16550A
>serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>serial 0000:00:1e.3: PCI INT B disabled
>brd: module loaded
>loop: module loaded
>Fixed MDIO Bus: probed
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci: probe of 0000:00:1f.2 failed with error -22
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata1.00: ATA-6: HTC426040G9AT00, 00P4A0B4, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HTC426040G9AT00  00P4 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xa0040000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29.1-70.fc11.i586 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29.1-70.fc11.i586 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29.1-70.fc11.i586 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29.1-70.fc11.i586 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29.1-70.fc11.i586 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Marking TSC unstable due to TSC halts in idle
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>psmouse serio1: ID: 10 00 64<4>Clocksource tsc unstable (delta = -186243893 ns)
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: New USB device found, idVendor=04b3, idProduct=4484
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>PM: Resume from partition /dev/VolGroup00/LogVol01
>PM: Checking hibernation image.
>PM: Error -6 checking image file
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 5:725:527
>Initalizing network drop monitor service
>Freeing unused kernel memory: 424k freed
>Write protecting the kernel read-only data: 1436k
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: New USB device found, idVendor=0483, idProduct=2016
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: Biometric Coprocessor
>usb 4-2: Manufacturer: STMicroelectronics
>usb 4-2: configuration #1 chosen from 1 choice
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>[drm] TV-11: set mode NTSC 480i 0
>allocated 1024x768 fb: 0x007df000, bo f67d7900
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>[drm] LVDS-8: set mode 1024x768 13
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1239877812.347:2): selinux=0 auid=4294967295 ses=4294967295
>udev: starting version 141
>tg3.c:v3.97 (December 10, 2008)
>tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:00.0: setting latency timer to 64
>tg3 0000:02:00.0: PME# disabled
>eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:0a:e4:35:a9:14
>eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>NET: Registered protocol family 23
>nsc-ircc 00:0b: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x164e
>nsc-ircc, driver loaded (Dag Brattli)
>irda0 (): not using net_device_ops yet
>IrDA: Registered device irda0
>nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>thinkpad_acpi: ThinkPad ACPI Extras v0.22
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 75ET30WW (1.01a), EC 75HT18WW-1.00
>thinkpad_acpi: IBM ThinkPad X41 Tablet, model 18695CU
>thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
>Registered led device: tpacpi::thinklight
>thinkpad_acpi: acpi_bus_get_device(bay) failed: -19
>thinkpad_acpi: disabling subdriver bay
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: CMOS NVRAM (7) and EC (0) do not agree on display brightness level
>input: ThinkPad Extra Buttons as /devices/virtual/input/input8
>ppdev: user-space parallel port driver
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0555]
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0c30, PCI irq 16
>yenta_cardbus 0000:04:00.0: Socket status: 30000006
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x6fff: clean.
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xa0200000 - 0xafffffff
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>sdhci-pci 0000:04:00.1: SDHCI controller found [1180:0822] (rev 13)
>sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:04:00.1] using PIO
>ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>eth1 (ipw2200): not using net_device_ops yet
>ipw2200 0000:04:02.0: firmware: requesting ipw2200-bss.fw
>intel_rng: FWH not detected
>mmc0: new SDHC card at address b368
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>mmcblk0: mmc0:b368 SDC   7.46 GiB 
> mmcblk0: p1
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>ALSA sound/pci/ac97/ac97_codec.c:2159: MC'97 1 converters and GPIO not ready (0xff00)
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>ALSA sound/pci/ac97/ac97_codec.c:2127: AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50924 usecs
>intel8x0: measured clock 216 rejected
>intel8x0: clocking to 48000
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>swap_cgroup: uses 992 bytes of vmalloc for pointer array space and 1015808 bytes to hold mem_cgroup pointers on swap
>swap_cgroup can be disabled by noswapaccount boot option.
>Adding 1015800k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1015800k 
>platform microcode: firmware: requesting intel-ucode/06-0d-08
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>tg3 0000:02:00.0: PME# disabled
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-0: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>fuse init (API version 7.11)

Actions: View

Attachments on bug 21230: 24871 | 24872 | 24873 | 24874 | 24875 | 25426 | 25832 | 26581 | 27484

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.