Attachment 24896 Details for Bug 21215 – Xorg.log as generated after every xorg.conf file was removed.

Xorg.log as generated after every xorg.conf file was removed.

Xorg.0.log (text/plain), 19.48 KB, created by Ernst Eeldert on 2009-04-17 08:18:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ernst Eeldert

Created: 2009-04-17 08:18:52 UTC

Size: 19.48 KB

patch

obsolete

>
>X.Org X Server 1.6.0
>Release Date: 2009-2-25
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.29-ARCH i686 
>Current Operating System: Linux ernst-laptop 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
>Build Date: 10 April 2009  07:03:14PM
> 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 17 17:12:43 2009
>(II) Loader magic: 0x1a40
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 4.0
>	X.Org Server Extension : 2.0
>(II) Loader running on linux
>(++) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
>(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/524288
>(==) Using default built-in configuration (39 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default i810 Device 0"
>		Driver	"i810"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default i810 Screen 0"
>		Device	"Builtin Default i810 Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default i810 Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default i810 Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default i810 Device 0"
>(==) No monitor specified for screen "Builtin Default i810 Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) FontPath set to:
>	/usr/share/fonts/misc,
>	/usr/share/fonts/100dpi:unscaled,
>	/usr/share/fonts/75dpi:unscaled,
>	/usr/share/fonts/TTF,
>	/usr/share/fonts/Type1,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.6.3
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "i810"
>(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
>(II) Module i810: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.6.3
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) UnloadModule: "i810"
>(II) Unloading /usr/lib/xorg/modules/drivers//i810_drv.so
>(II) Failed to load module "i810" (already loaded, 153527920)
>(II) LoadModule: "vesa"
>(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.2.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "fbdev"
>(WW) Warning, couldn't open module fbdev
>(II) UnloadModule: "fbdev"
>(EE) Failed to load module "fbdev" (module does not exist, 0)
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
>	965GM, 965GME/GLE, G33, Q35, Q33,
>	Mobile IntelÂ® GM45 Express Chipset,
>	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(WW) Falling back to old probe method for vesa
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
>(--) intel(0): Chipset: "945GM"
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(II) intel(0): Resizable framebuffer: available (0 4)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 8, (OK)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 8, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 8, (OK)
>drmOpenByBusid: drmOpenMinor returns 8
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) intel(0): Output VGA1 has no monitor section
>(II) intel(0): Output LVDS1 has no monitor section
>(II) intel(0): Output DVI1 has no monitor section
>(II) intel(0): Output TV1 has no monitor section
>(II) intel(0): Output VGA1 disconnected
>(II) intel(0): Output LVDS1 connected
>(II) intel(0): Output DVI1 connected
>(II) intel(0): Output TV1 disconnected
>(II) intel(0): Using sloppy heuristic for initial modes
>(II) intel(0): Output LVDS1 using initial mode 1440x900
>(II) intel(0): Output DVI1 using initial mode 1280x1024
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) intel(0): [DRI2] Setup complete
>(**) intel(0): Kernel mode setting active, disabling FBC.
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 4194303 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): Page Flipping disabled
>(II) UXA(0): Driver registered support for the following operations:
>(II)         solid
>(II)         copy
>(II)         composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0xffff4fff: DRI memory manager (4194260 kB)
>(II) intel(0): 0x00000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x00000000:            start of memory manager
>(II) intel(0): 0x02000000-0x027fffff: front buffer (8192 kB)
>(II) intel(0): 0x01900000-0x01909fff: HW cursors (40 kB)
>(II) intel(0): 0xffff5000:            end of memory manager
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): direct rendering: DRI2 Enabled
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
>(II) GLX: Initialized DRI2 GL provider for screen 0
>(II) intel(0): Setting screen physical size to 303 x 216
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.2.1
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
>(II) Macintosh mouse button emulation: Found 3 mouse buttons
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Configuring as mouse
>(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
>(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
>(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
>(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
>(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
>(II) config/hal: Adding input device PS/2 Mouse
>(**) PS/2 Mouse: always reports core events
>(**) PS/2 Mouse: Device: "/dev/input/event9"
>(II) PS/2 Mouse: Found 3 mouse buttons
>(II) PS/2 Mouse: Found x and y relative axes
>(II) PS/2 Mouse: Configuring as mouse
>(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
>(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
>(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
>(**) PS/2 Mouse: (accel) filter chain progression: 2.00
>(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
>(**) PS/2 Mouse: (accel) set acceleration profile 0
>(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
>(**) AlpsPS/2 ALPS GlidePoint: always reports core events
>(**) AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event10"
>(II) AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons
>(II) AlpsPS/2 ALPS GlidePoint: Found x and y relative axes
>(II) AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
>(II) AlpsPS/2 ALPS GlidePoint: Found absolute touchpad
>(II) AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
>(**) AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
>(**) AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
>(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
>(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
>(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
>(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
>(II) config/hal: Adding input device Logitech USB Receiver
>(**) Logitech USB Receiver: always reports core events
>(**) Logitech USB Receiver: Device: "/dev/input/event11"
>(II) Logitech USB Receiver: Found 16 mouse buttons
>(II) Logitech USB Receiver: Found x and y relative axes
>(II) Logitech USB Receiver: Found scroll wheel(s)
>(II) Logitech USB Receiver: Configuring as mouse
>(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
>(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
>(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
>(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
>(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
>(**) Logitech USB Receiver: (accel) set acceleration profile 0
>(II) config/hal: Adding input device Logitech Logitech USB Keyboard
>(**) Logitech Logitech USB Keyboard: always reports core events
>(**) Logitech Logitech USB Keyboard: Device: "/dev/input/event12"
>(II) Logitech Logitech USB Keyboard: Found keys
>(II) Logitech Logitech USB Keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Video Bus
>(**) Video Bus: always reports core events
>(**) Video Bus: Device: "/dev/input/event8"
>(II) Video Bus: Found keys
>(II) Video Bus: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Video Bus
>(**) Video Bus: always reports core events
>(**) Video Bus: Device: "/dev/input/event7"
>(II) Video Bus: Found keys
>(II) Video Bus: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) intel(0): EDID vendor "SEC", prod id 17495
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0   95.44  1440 1504 1536 1744  900 903 906 912 -hsync -vsync (54.7 kHz)
>(II) intel(0): EDID vendor "SEC", prod id 17495
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0   95.44  1440 1504 1536 1744  900 903 906 912 -hsync -vsync (54.7 kHz)
>(II) intel(0): Allocate new frame buffer 1680x1050 stride 2048
>(II) intel(0): New front buffer at 0x3000000
>(II) intel(0): EDID vendor "SEC", prod id 17495
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0   95.44  1440 1504 1536 1744  900 903 906 912 -hsync -vsync (54.7 kHz)

Actions: View

Attachments on bug 21215: 24844 | 24896 | 25052 | 25064

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.