Attachment 26066 Details for Bug 21851 – lspci output

lspci output

lspci (text/plain), 13.00 KB, created by Stefan Dösinger on 2009-05-21 05:57:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Dösinger

Created: 2009-05-21 05:57:42 UTC

Size: 13.00 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
>	Capabilities: [e4] Vendor Specific Information <?>
>	Capabilities: [a0] AGP version 2.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>	Kernel driver in use: agpgart-intel
>	Kernel modules: intel-agp
>
>00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 96
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: d0100000-d01fffff
>	Prefetchable memory behind bridge: d8000000-dfffffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 10
>	Region 4: I/O ports at 1800 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 5
>	Region 4: I/O ports at 1820 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 10
>	Region 4: I/O ports at 1840 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 10
>	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=0080
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
>	Latency: 0
>	Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: d0200000-d05fffff
>	Prefetchable memory behind bridge: 30000000-37ffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1860 [size=16]
>	Region 5: Memory at 38000000 (32-bit, non-prefetchable) [size=1K]
>	Kernel driver in use: ata_piix
>
>00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 10
>	Region 4: I/O ports at 1880 [size=32]
>
>00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 10
>	Region 0: I/O ports at 1c00 [size=256]
>	Region 1: I/O ports at 18c0 [size=64]
>	Region 2: Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
>	Region 3: Memory at d0000800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: Intel ICH
>	Kernel modules: snd-intel8x0
>
>00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 10
>	Region 0: I/O ports at 2400 [size=256]
>	Region 1: I/O ports at 2000 [size=128]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: Intel ICH Modem
>	Kernel modules: 8250_pci, snd-intel8x0m
>
>01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] (rev 02) (prog-if 00 [VGA controller])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at 3000 [size=256]
>	Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at d0120000 [disabled] [size=128K]
>	Capabilities: [58] AGP version 2.0
>		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: radeon
>
>02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=8K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: b44
>	Kernel modules: b44
>
>02:04.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
>	Subsystem: Intel Corporation MIM2000/Centrino
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Kernel driver in use: ipw2100
>	Kernel modules: ipw2100
>
>02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at d0207000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: 30000000-33fff000 (prefetchable)
>	Memory window 1: 3c000000-3ffff000
>	I/O window 0: 00004000-000040ff
>	I/O window 1: 00004400-000044ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>	Kernel modules: yenta_socket
>
>02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at d020a000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
>	Memory window 0: 34000000-37fff000 (prefetchable)
>	Memory window 1: 40000000-43fff000
>	I/O window 0: 00004800-000048ff
>	I/O window 1: 00004c00-00004cff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>	Kernel modules: yenta_socket
>
>02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at d0208000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
>	Subsystem: Acer Incorporated [ALI] Device 001f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at d0209000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: ohci1394
>	Kernel modules: ohci1394
>

Actions: View

Attachments on bug 21851: 26064 | 26065 | 26066

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.