Attachment 27116 Details for Bug 22464 – dmesg

dmesg

dmesg_EXAPIX (text/plain), 52.88 KB, created by David Heidelberg (okias) on 2009-06-25 00:34:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Heidelberg (okias)

Created: 2009-06-25 00:34:14 UTC

Size: 52.88 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.30-rc7 (root@sc-neo) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #5 SMP Fri Jun 19 14:31:26 CEST 2009
>Command line: ro root=/dev/sda2 quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
> BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
> BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
> BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
> BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x140000 max_arch_pfn = 0x100000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-EBFFF write-protect
>  EC000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 100000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FC0000000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xbff90 max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-00000000bff90000
> 0000000000 - 00bfe00000 page 2M
> 00bfe00000 - 00bff90000 page 4k
>kernel direct mapping tables up to bff90000 @ 10000-15000
>init_memory_mapping: 0000000100000000-0000000140000000
> 0100000000 - 0140000000 page 2M
>kernel direct mapping tables up to 140000000 @ 13000-19000
>ACPI: RSDP 00000000000f9470 00014 (v00 ACPIAM)
>ACPI: RSDT 00000000bff90000 00048 (v01 MSI_NB MEGABOOK 20081226 MSFT 00000097)
>ACPI: FACP 00000000bff90200 00084 (v01 122608 FACP1133 20081226 MSFT 00000097)
>ACPI: DSDT 00000000bff905c0 07D0F (v01  1ADTS 1ADTS008 00000008 INTL 20051117)
>ACPI: FACS 00000000bff9e000 00040
>ACPI: APIC 00000000bff90390 0006C (v01 122608 APIC1133 20081226 MSFT 00000097)
>ACPI: MCFG 00000000bff90400 0003C (v01 122608 OEMMCFG  20081226 MSFT 00000097)
>ACPI: SLIC 00000000bff90440 00176 (v01 MSI_NB MEGABOOK 20081226 MSFT 00000097)
>ACPI: OEMB 00000000bff9e040 00072 (v01 122608 OEMB1133 20081226 MSFT 00000097)
>ACPI: HPET 00000000bff985c0 00038 (v01 122608 OEMHPET  20081226 MSFT 00000097)
>ACPI: ASF! 00000000bff98600 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
>ACPI: GSCI 00000000bff9e0c0 02024 (v01 122608 GMCHSCI  20081226 MSFT 00000097)
>ACPI: SSDT 00000000bffa0a50 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Bootmem setup node 0 0000000000000000-0000000140000000
>  NODE_DATA [0000000000014000 - 0000000000017fff]
>  bootmap [0000000000018000 -  000000000003ffff] pages 28
>(7 early reservations) ==> bootmem [0000000000 - 0140000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000b12978]    TEXT DATA BSS ==> [0000200000 - 0000b12978]
>  #3 [0000099000 - 0000100000]    BIOS reserved ==> [0000099000 - 0000100000]
>  #4 [0000b13000 - 0000b1314b]              BRK ==> [0000b13000 - 0000b1314b]
>  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>  #6 [0000013000 - 0000014000]          PGTABLE ==> [0000013000 - 0000014000]
>found SMP MP-table at [ffff8800000ff780] ff780
> [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00140000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x00000099
>    0: 0x00000100 -> 0x000bff90
>    0: 0x00100000 -> 0x00140000
>On node 0 totalpages: 1048345
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2432 pages reserved
>  DMA zone: 1489 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767944 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>4 Processors exceeds NR_CPUS limit of 2
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000
>PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000
>PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
>PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 25 pages at ffff880028022000, static data 71072 bytes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027993
>Policy zone: Normal
>Kernel command line: ro root=/dev/sda2 quiet
>Initializing CPU#0
>NR_IRQS:320
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Fast TSC calibration using PIT
>Detected 2260.876 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 4060352k/5242880k available (5711k kernel code, 1049500k absent, 133028k reserved, 2331k data, 536k init)
>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.75 BogoMIPS (lpj=2260876)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>ACPI: Core revision 20090320
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4521.75 BogoMIPS (lpj=2260876)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (9043.50 BogoMIPS).
>net_namespace: 1720 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Enabling special treatment for EC from MSI.
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>DMAR: Forcing write-buffer flush capability
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
>pci 0000:00:1a.1: reg 20 io port: [0xa480-0xa49f]
>pci 0000:00:1a.2: reg 20 io port: [0xa400-0xa41f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8efec00-0xf8efefff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8ef8000-0xf8efbfff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
>pci 0000:00:1d.1: reg 20 io port: [0xac00-0xac1f]
>pci 0000:00:1d.2: reg 20 io port: [0xa880-0xa89f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8eff000-0xf8eff3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
>pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
>pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
>pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
>pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8eff800-0xf8efffff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf8eff400-0xf8eff4ff]
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:08:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
>pci 0000:08:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:08:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
>pci 0000:08:00.0: reg 24 io port: [0xec00-0xec7f]
>pci 0000:08:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff]
>pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfebfffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xf8fc0000-0xf8fdffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xf8f00000-0xf8ffffff]
>pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf9000000-0xf9dfffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xce000000-0xcfffffff]
>pci 0000:06:00.0: reg 10 64bit mmio: [0xf9efe000-0xf9efffff]
>pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:06:00.0: PME# disabled
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf9e00000-0xf9efffff]
>pci 0000:07:00.0: reg 10 32bit mmio: [0xf9fff800-0xf9ffffff]
>pci 0000:07:00.0: reg 14 32bit mmio: [0xf9fff400-0xf9fff47f]
>pci 0000:07:00.0: reg 20 32bit mmio: [0xf9fff000-0xf9fff07f]
>pci 0000:07:00.0: reg 24 32bit mmio: [0xf9ffec00-0xf9ffec7f]
>pci 0000:07:00.1: reg 10 32bit mmio: [0xf9ffe800-0xf9ffe8ff]
>pci 0000:07:00.2: reg 10 32bit mmio: [0xf9ffe400-0xf9ffe4ff]
>pci 0000:07:00.3: reg 10 32bit mmio: [0xf9ffe000-0xf9ffe0ff]
>pci 0000:07:00.4: reg 10 32bit mmio: [0xf9ffdc00-0xf9ffdcff]
>pci 0000:00:1c.5: bridge 32bit mmio: [0xf9f00000-0xf9ffffff]
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>FS-Cache: Loaded
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
>system 00:08: ioport range 0x4c0-0x4cf has been reserved
>system 00:08: ioport range 0x4d2-0x4ff has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:01.0:   IO window: 0xe000-0xefff
>pci 0000:00:01.0:   MEM window: 0xfa000000-0xfebfffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.0:   MEM window: 0xf8f00000-0xf8ffffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.1:   MEM window: 0xf9000000-0xf9dfffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000ce000000-0x000000cfffffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
>pci 0000:00:1c.3:   IO window: disabled
>pci 0000:00:1c.3:   MEM window: 0xf9e00000-0xf9efffff
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
>pci 0000:00:1c.5:   IO window: disabled
>pci 0000:00:1c.5:   MEM window: 0xf9f00000-0xf9ffffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:08: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:08: resource 1 mem: [0xfa000000-0xfebfffff]
>pci_bus 0000:08: resource 2 pref mem [0xd0000000-0xdfffffff]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:02: resource 1 mem: [0xf8f00000-0xf8ffffff]
>pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:03: resource 1 mem: [0xf9000000-0xf9dfffff]
>pci_bus 0000:03: resource 2 pref mem [0xce000000-0xcfffffff]
>pci_bus 0000:06: resource 1 mem: [0xf9e00000-0xf9efffff]
>pci_bus 0000:07: resource 1 mem: [0xf9f00000-0xf9ffffff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1245921550.231:1): initialized
>fuse init (API version 7.11)
>msgmni has been set to 7930
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
>pci 0000:00:1a.0: Performing full reset
>pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1a.1: Performing full reset
>pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1a.2: Performing full reset
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1d.2: Performing full reset
>pci 0000:08:00.0: Boot video device
>pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: Using ACPI for slot detection.
>pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 0 ss_did 0
>pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>ACPI: AC Adapter [ADP1] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/PNP0C09:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>acpi device:04: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input3
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: SSDT 00000000bffa01c0 00259 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: SSDT 00000000bffa04b0 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Switched to high resolution mode on CPU 0
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device1
>ACPI: SSDT 00000000bffa00f0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
>ACPI: SSDT 00000000bffa0420 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
>Switched to high resolution mode on CPU 1
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device2
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>Loading iSCSI transport class v2.0-870.
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff900 irq 30
>ata2: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff980 irq 30
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb00 irq 30
>ata6: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb80 irq 30
>PPP generic driver version 2.4.2
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 31 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xffffc20000660000, 00:21:85:df:0b:6c, XID 38000000 IRQ 31
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
>iwlagn: Copyright(c) 2003-2009 Intel Corporation
>iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>iwlagn 0000:06:00.0: setting latency timer to 64
>iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x50
>iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:06:00.0: irq 32 for MSI/MSI-X
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8efec00
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.30-rc7 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8eff000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.30-rc7 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: detected 2 ports
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.0: Performing full reset
>uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>usb usb3: default language 0x0409
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.30-rc7 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: detected 2 ports
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.1: Performing full reset
>uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
>usb usb4: default language 0x0409
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.30-rc7 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: detected 2 ports
>uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.2: Performing full reset
>uhci_hcd 0000:00:1a.2: supports USB remote wakeup
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a400
>usb usb5: default language 0x0409
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.30-rc7 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
>usb usb6: default language 0x0409
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.30-rc7 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>usb usb6: uevent
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>usb 6-0:1.0: uevent
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: power on to power good time: 2ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '007'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
>usb usb7: default language 0x0409
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.30-rc7 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>usb usb7: uevent
>usb usb7: usb_probe_device
>usb usb7: configuration #1 chosen from 1 choice
>usb usb7: adding 7-0:1.0 (config #1, interface 0)
>usb 7-0:1.0: uevent
>hub 7-0:1.0: usb_probe_interface
>hub 7-0:1.0: usb_probe_interface - got id
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>hub 7-0:1.0: standalone hub
>hub 7-0:1.0: no power switching (usb 1.0)
>hub 7-0:1.0: individual port over-current protection
>hub 7-0:1.0: power on to power good time: 2ms
>hub 7-0:1.0: local power source is good
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '008'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880
>usb usb8: default language 0x0409
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.30-rc7 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>usb usb8: uevent
>usb usb8: usb_probe_device
>usb usb8: configuration #1 chosen from 1 choice
>usb usb8: adding 8-0:1.0 (config #1, interface 0)
>usb 8-0:1.0: uevent
>hub 8-0:1.0: usb_probe_interface
>hub 8-0:1.0: usb_probe_interface - got id
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>hub 8-0:1.0: standalone hub
>hub 8-0:1.0: no power switching (usb 1.0)
>hub 8-0:1.0: individual port over-current protection
>hub 8-0:1.0: power on to power good time: 2ms
>hub 8-0:1.0: local power source is good
>hub 8-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver usbserial
>usbserial: USB Serial Driver core
>USB Serial support registered for IPWireless converter
>usbcore: registered new interface driver ipwtty
>ipw: v0.3:IPWireless tty driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>Bluetooth: Generic Bluetooth USB driver ver 0.5
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:07:00.1: SDHCI controller found [197b:2382] (rev 0)
>sdhci-pci 0000:07:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:07:00.1: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA
>sdhci-pci 0000:07:00.2: SDHCI controller found [197b:2381] (rev 0)
>sdhci-pci 0000:07:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:07:00.2: Refusing to bind to secondary interface.
>sdhci-pci 0000:07:00.2: PCI INT A disabled
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.20.
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ACPI: Battery Slot [BAT1] (battery present)
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 2: status 0501 change 0001
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
>ALSA device list:
>  #0: HDA Intel at 0xf8ef8000 irq 22
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.11
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
>hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
>hub 2-0:1.0: port 2 not reset yet, waiting 50ms
>ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
> sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
>hub 6-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>ata2: SATA link down (SStatus 0 SControl 300)
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>Clocksource tsc unstable (delta = -435134996 ns)
>usb 6-2: ep0 maxpacket = 32
>usb 6-2: skipped 1 descriptor after interface
>usb 6-2: skipped 1 descriptor after interface
>usb 6-2: default language 0x0409
>usb 6-2: New USB device found, idVendor=ffc0, idProduct=001f
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: Gaming II
>usb 6-2: Manufacturer: Areson
>usb 6-2: uevent
>usb 6-2: usb_probe_device
>usb 6-2: configuration #1 chosen from 1 choice
>usb 6-2: adding 6-2:1.0 (config #1, interface 0)
>usb 6-2:1.0: uevent
>usbhid 6-2:1.0: usb_probe_interface
>usbhid 6-2:1.0: usb_probe_interface - got id
>input: Areson Gaming II as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5
>generic-usb 0003:FFC0:001F.0001: input,hidraw0: USB HID v10.01 Mouse [Areson Gaming II] on usb-0000:00:1d.0-2/input0
>usb 6-2: adding 6-2:1.1 (config #1, interface 1)
>usb 6-2:1.1: uevent
>usbhid 6-2:1.1: usb_probe_interface
>usbhid 6-2:1.1: usb_probe_interface - got id
>input: Areson Gaming II as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input6
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
>generic-usb 0003:FFC0:001F.0002: input,hidraw1: USB HID v10.01 Mouse [Areson Gaming II] on usb-0000:00:1d.0-2/input1
>drivers/usb/core/inode.c: creating file '002'
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
>usb usb3: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb7: suspend_rh (auto-stop)
>usb usb8: suspend_rh (auto-stop)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: Optiarc DVD RW AD-7560S, SX01, max UDMA/100, ATAPI AN
>ata5.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560S  SX01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>ata6: SATA link down (SStatus 0 SControl 300)
>registered taskstats version 1
>EXT2-fs: sda2: couldn't mount because of unsupported optional features (44).
>EXT4-fs: INFO: recovery required on readonly filesystem.
>EXT4-fs: write access will be enabled during recovery.
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1031, dev sda2:8, commit interval 5 seconds
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: recovery complete.
>EXT4-fs: mounted filesystem sda2 with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 536k freed
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1a.7: suspend root hub
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>hub 8-0:1.0: hub_suspend
>usb usb8: bus auto-suspend
>usb usb8: suspend_rh
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>udev: starting version 141
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb 6-2: uevent
>usb 6-2:1.0: uevent
>usb 6-2:1.1: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 6-2:1.0: uevent
>usb 6-2: uevent
>usb 6-2:1.0: uevent
>usb 6-2: uevent
>usb 6-2:1.1: uevent
>usb 6-2: uevent
>usb 6-2:1.1: uevent
>usb 6-2: uevent
>nouveau 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:08:00.0: setting latency timer to 64
>nouveau 0000:08:00.0: Detected an NV50 generation card (0x096480a1)
>[TTM] TTM available graphics memory: 1982 MiB
>[TTM] TTM available object memory: 1982 MiB
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>nouveau 0000:08:00.0: Allocating FIFO number 1
>nouveau 0000:08:00.0: nouveau_fifo_alloc: initialised FIFO 1
>nouveau 0000:08:00.0: Attempting to load BIOS image from PRAMIN
>nouveau 0000:08:00.0: ... appears to be valid
>nouveau 0000:08:00.0: BIT BIOS found
>nouveau 0000:08:00.0: Bios version 62.94.3c.00
>nouveau 0000:08:00.0: TMDS table revision 2.0 not currently supported
>nouveau 0000:08:00.0: Found Display Configuration Block version 4.0
>nouveau 0000:08:00.0: Raw DCB entry 0: 01000323 00010034
>nouveau 0000:08:00.0: G80+ LVDS not initialized by driver; ignoring conf bits
>nouveau 0000:08:00.0: Parsing VBIOS init table 0 at offset 0xD51F
>nouveau 0000:08:00.0: ========== unknown reg 0x00021220 ==========
>nouveau 0000:08:00.0: ========== unknown reg 0x0002121C ==========
>nouveau 0000:08:00.0: 0xD627: Init table command not found: 0x97
>nouveau 0000:08:00.0: Parsing VBIOS init table 1 at offset 0xD910
>nouveau 0000:08:00.0: Parsing VBIOS init table 2 at offset 0xE8D9
>nouveau 0000:08:00.0: Parsing VBIOS init table 3 at offset 0xEA22
>nouveau 0000:08:00.0: Parsing VBIOS init table 4 at offset 0xEC8A
>nouveau 0000:08:00.0: Detected a LVDS output
>nouveau 0000:08:00.0: Detected a LVDS connector
>allocated 1680x1050 fb: 0x40220000, bo ffff88013d3d4200
>Console: switching to colour frame buffer device 210x65
>[drm] LVDS-7: set mode 1680x1050 a
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.14 20090420 for 0000:08:00.0 on minor 0
>EXT4 FS on sda2, internal journal on sda2:8
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 2055, dev sda4:8, commit interval 5 seconds
>EXT4 FS on sda4, internal journal on sda4:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda4 with ordered data mode
>Adding 2000084k swap on /dev/sda3.  Priority:-1 extents:1 across:2000084k 
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb 6-2: uevent
>usb 6-2:1.0: uevent
>usb 6-2:1.1: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>iwlagn 0000:06:00.0: firmware: requesting iwlwifi-5000-1.ucode
>iwlagn 0000:06:00.0: loaded firmware version 5.4.1.16
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: authenticate with AP 00:21:63:e9:83:2b
>wlan0: authenticated
>wlan0: associate with AP 00:21:63:e9:83:2b
>wlan0: RX AssocResp from 00:21:63:e9:83:2b (capab=0x1 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>nouveau 0000:08:00.0: Allocating FIFO number 2
>nouveau 0000:08:00.0: nouveau_fifo_alloc: initialised FIFO 2
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 17 us
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
>IP: [<ffffffffa00133ec>] nouveau_bo_move_m2mf+0x5c/0x580 [nouveau]
>PGD 13cbe8067 PUD 13d0ba067 PMD 0 
>Oops: 0000 [#1] SMP 
>last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0/type
>CPU 1 
>Modules linked in: nouveau cfbcopyarea cfbimgblt cfbfillrect
>Pid: 2700, comm: X Not tainted 2.6.30-rc7 #5 GX620
>RIP: 0010:[<ffffffffa00133ec>]  [<ffffffffa00133ec>] nouveau_bo_move_m2mf+0x5c/0x580 [nouveau]
>RSP: 0018:ffff88013e715968  EFLAGS: 00010206
>RAX: 0000000000000000 RBX: 00000000ffffffea RCX: ffff88013e71b688
>RDX: ffff88013e715aa8 RSI: 0000000000000001 RDI: ffff88013b4000d0
>RBP: ffff88013d3d4000 R08: ffff88013e715aa8 R09: 0000000000002240
>R10: 0000000000000100 R11: 6db6db6db6db6db7 R12: ffff88013e71b688
>R13: 0000000000000000 R14: 0000000000040000 R15: ffff88013e71b600
>FS:  00007fd9bd52b6f0(0000) GS:ffff88002803b000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>CR2: 0000000000000028 CR3: 000000013cbec000 CR4: 00000000000006a0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process X (pid: 2700, threadinfo ffff88013e714000, task ffff88013d2b8000)
>Stack:
> 0000000000000001 ffff88013b4000d0 ffff88013e715aa8 0000000100000000
> ffff88013b400000 ffff880121958a00 ffff88013e71b688 0000000000000000
> ffff88013e71b628 ffff88013e715aa8 0000000000000000 ffff88013e71b688
>Call Trace:
> [<ffffffffa0013c4f>] ? nouveau_bo_move+0x33f/0x390 [nouveau]
> [<ffffffffa0012f2f>] ? nouveau_sgdma_init_ttm+0x2f/0x50 [nouveau]
> [<ffffffff812d16ba>] ? ttm_bo_handle_move_mem+0x10a/0x360
> [<ffffffff812d3091>] ? ttm_bo_evict+0x131/0x1f0
> [<ffffffff812c76dd>] ? drm_mm_pre_get+0x1d/0x100
> [<ffffffff812d2d9f>] ? ttm_bo_mem_space+0x45f/0x620
> [<ffffffff8103247b>] ? __wake_up_common+0x5b/0x90
> [<ffffffff812d37f2>] ? ttm_bo_move_buffer+0xa2/0x110
> [<ffffffff812d389c>] ? ttm_buffer_object_validate+0x3c/0xd0
> [<ffffffff812d3cc7>] ? ttm_buffer_object_init+0x2d7/0x380
> [<ffffffffa0015780>] ? nouveau_bo_new+0x100/0x170 [nouveau]
> [<ffffffffa00151a0>] ? nouveau_bo_del_ttm+0x0/0x70 [nouveau]
> [<ffffffffa0015907>] ? nouveau_gem_ioctl_new+0x117/0x380 [nouveau]
> [<ffffffff812be873>] ? drm_ioctl+0x133/0x3d0
> [<ffffffffa00157f0>] ? nouveau_gem_ioctl_new+0x0/0x380 [nouveau]
> [<ffffffff81056a50>] ? autoremove_wake_function+0x0/0x30
> [<ffffffff810e5645>] ? vfs_ioctl+0x85/0xb0
> [<ffffffff810e5708>] ? do_vfs_ioctl+0x98/0x580
> [<ffffffff810e5c39>] ? sys_ioctl+0x49/0x80
> [<ffffffff8100be6b>] ? system_call_fastpath+0x16/0x1b
>Code: 00 00 48 89 44 24 20 49 8b af 68 01 00 00 48 85 ed 0f 84 fb 04 00 00 49 8b 04 24 48 8b 54 24 10 4c 8b 70 28 48 8b 02 49 c1 e6 0c <4c> 8b 68 28 49 c1 e5 0c 41 80 bf 71 01 00 00 00 75 33 41 83 7c 
>RIP  [<ffffffffa00133ec>] nouveau_bo_move_m2mf+0x5c/0x580 [nouveau]
> RSP <ffff88013e715968>
>CR2: 0000000000000028
>---[ end trace 0437d3a95ab397d9 ]---
>nouveau 0000:08:00.0: nouveau_fifo_free: freeing fifo 2
>[drm:drm_release] *ERROR* Device busy: 1
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 17 us
>nouveau 0000:08:00.0: Allocating FIFO number 2
>nouveau 0000:08:00.0: nouveau_fifo_alloc: initialised FIFO 2
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm] LVDS-7: set mode 1680x1050 f
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 17 us
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 17 us

Actions: View

Attachments on bug 22464: 27116

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.