Attachment 27162 Details for Bug 22494 – xorg logs

xorg logs

Xorg.0.log (text/plain), 85.89 KB, created by Victor NOEL on 2009-06-26 06:44:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Victor NOEL

Created: 2009-06-26 06:44:00 UTC

Size: 85.89 KB

patch

obsolete

>
>X.Org X Server 1.6.0
>Release Date: 2009-2-25
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
>Current Operating System: Linux gyoza 2.6.28-13-generic #44-Ubuntu SMP Tue Jun 2 07:57:31 UTC 2009 i686
>Build Date: 09 April 2009  02:10:02AM
>xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd) 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 26 15:02:22 2009
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) No Layout section.  Using the first Screen section.
>(**) |-->Screen "Default Screen" (0)
>(**) |   |-->Monitor "Configured Monitor"
>(**) |   |-->Device "Configured Video Device"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
>	Entry deleted from font path.
>(==) FontPath set to:
>	/usr/share/fonts/X11/misc,
>	/usr/share/fonts/X11/100dpi/:unscaled,
>	/usr/share/fonts/X11/75dpi/:unscaled,
>	/usr/share/fonts/X11/Type1,
>	/usr/share/fonts/X11/100dpi,
>	/usr/share/fonts/X11/75dpi,
>	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Loader magic: 0x3bc0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 4.0
>	X.Org Server Extension : 2.0
>(II) Loader running on linux
>(++) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/524288, 0xc0000000/268435456, 0xd0300000/262144, I/O @ 0x00001800/8
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
>(II) Matched intel from file name intel.ids
>(==) Matched intel for the autoconfigured driver
>(==) Assigned the driver to the xf86ConfigLayout
>(II) LoadModule: "intel"
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.7.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
>	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>	Mobile IntelÂ® GM45 Express Chipset,
>	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(**) intel(0): Option "AccelMethod" "UXA"
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
>(--) intel(0): Chipset: "945GM"
>(--) intel(0): Linear framebuffer at 0xC0000000
>(--) intel(0): IO registers at addr 0xD0200000
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(**) intel(0): Using UXA for acceleration
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA using monitor section Configured Monitor
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): Attempting to determine panel fixed mode.
>(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
>(II) intel(0): Output TV has no monitor section
>(II) intel(0): Resizable framebuffer: available (1 4)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output TV disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output LVDS using initial mode 1280x800
>(II) intel(0): detected 256 kB GTT.
>(II) intel(0): detected 7932 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x20d8 (FWATER_BLC) changed from 0x03060106 to 0x03010301
>(WW) intel(0): Register 0x20dc (FWATER_BLC2) changed from 0x00000306 to 0x00000301
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
>(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
>(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
>(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
>(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
>(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
>(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
>(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
>(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
>(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
>(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
>(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
>(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
>(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
>(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
>(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
>(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
>(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
>(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
>(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
>(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
>(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
>(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
>(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
>(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
>(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
>(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
>(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
>(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 238592 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 954364 kB available
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: drmOpenMinor returns 11
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) intel(0): [DRI2] Setup complete
>(**) intel(0): Framebuffer compression enabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) UXA(0): Driver registered support for the following operations:
>(II)         solid
>(II)         copy
>(II)         composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(WW) intel(0): drmDropMaster failed: Unknown error 4294967295
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
>)
>(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
>)
>(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
>)
>(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
>)
>(II) intel(0): 0x007bf000:            end of stolen memory
>(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x007bf000:            start of memory manager
>(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
>(II) intel(0): 0x0f9f4000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane B is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TV is connected to pipe none
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): Set up overlay video
>(II) intel(0): direct rendering: DRI2 Enabled
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
>(II) GLX: Initialized DRI2 GL provider for screen 0
>(II) intel(0): Setting screen physical size to 331 x 207
>(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0x1000000
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.1.1
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
>(**) Option "xkb_layout" "fr"
>(**) AT Translated Set 2 keyboard: xkb_layout: "fr"
>(**) Option "xkb_variant" "oss"
>(**) AT Translated Set 2 keyboard: xkb_variant: "oss"
>(II) config/hal: Adding input device Video Bus
>(**) Video Bus: always reports core events
>(**) Video Bus: Device: "/dev/input/event5"
>(II) Video Bus: Found keys
>(II) Video Bus: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Video Bus: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) Video Bus: xkb_model: "pc105"
>(**) Option "xkb_layout" "fr"
>(**) Video Bus: xkb_layout: "fr"
>(**) Option "xkb_variant" "oss"
>(**) Video Bus: xkb_variant: "oss"
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
>(II) Macintosh mouse button emulation: Found 3 mouse buttons
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Configuring as mouse
>(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
>(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
>(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
>(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
>(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
>(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
>(II) LoadModule: "synaptics"
>(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
>(II) Module synaptics: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 0.99.3
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(II) Synaptics touchpad driver version 0.99.3
>(**) Option "Device" "/dev/input/event7"
>(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
>(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
>(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
>(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
>(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
>(--) SynPS/2 Synaptics TouchPad touchpad found
>(**) SynPS/2 Synaptics TouchPad: always reports core events
>(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
>(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
>(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
>(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
>(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
>(--) SynPS/2 Synaptics TouchPad touchpad found
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using EDID range info for horizontal sync
>(II) intel(0): Using EDID range info for vertical refresh
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 2048x768 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0x800000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xd000000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1280x1024 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xd800000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1024x768 stride 1024
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0x7171000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xe000000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1024x768 stride 1024
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0x1847000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 2048x768 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xf000000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xd000000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 2048x768 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0x8a54000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xd000000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1024x768 stride 1024
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xaf63000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
>(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
>(II) intel(0): New front buffer at 0xf000000
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACI", prod id 6071
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): EDID vendor "LPL", prod id 52992
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1304 1336 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 52992

Actions: View

Attachments on bug 22494: 27162

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.