Attachment 27332 Details for Bug 22597 – dmesg up to before X start with kernel-2.6.30-gentoo-r1

dmesg up to before X start with kernel-2.6.30-gentoo-r1

dmesg-2.6.30-r1_KMS (text/plain), 23.51 KB, created by Robin Bankhead on 2009-07-02 04:55:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robin Bankhead

Created: 2009-07-02 04:55:30 UTC

Size: 23.51 KB

patch

obsolete

>Linux version 2.6.30-gentoo-r1 (root@pengi) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #2 Fri Jun 19 18:37:06 BST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003dee0000 (usable)
> BIOS-e820: 000000003dee0000 - 000000003deeb000 (ACPI data)
> BIOS-e820: 000000003deeb000 - 000000003df00000 (ACPI NVS)
> BIOS-e820: 000000003df00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>Malformed early option 'acpi'
>DMI present.
>last_pfn = 0x3dee0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-E3FFF uncachable
>  E4000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 03DF00000 mask FFFF00000 uncachable
>  2 base 03E000000 mask FFE000000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000f6c70 00014 (v00 TOSCPL)
>ACPI: RSDT 3dee59da 0002C (v01 TOSCPL   RSDT   06040000  LTP 00000000)
>ACPI: FACP 3deeaf3c 00074 (v01 TOSCPL MONTARA  06040000 PTL  00000050)
>ACPI: DSDT 3dee5a06 05536 (v01 TOSCPL MONTARAG 06040000 MSFT 0100000E)
>ACPI: FACS 3defbfc0 00040
>ACPI: APIC 3deeafb0 00050 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
>ACPI: Local APIC address 0xfee00000
>102MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00008000 - 0000ef00
>(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000100000 - 000068b384]    TEXT DATA BSS ==> [0000100000 - 000068b384]
>  #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #3 [000068c000 - 000068f0fc]              BRK ==> [000068c000 - 000068f0fc]
>  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #5 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003dee0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003dee0
>On node 0 totalpages: 253567
>free_area_init_node: node 0, pgdat c05d055c, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 206 pages used for memmap
>  HighMem zone: 26132 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>nr_irqs_gsi: 16
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251585
>Kernel command line: root=/dev/hda3 acpi=on noapic usbcore.autosuspend=1
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>NR_IRQS:288
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Fast TSC calibration using PIT
>Detected 2597.729 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing HighMem for node 0 (000377fe:0003dee0)
>Memory: 999436k/1014656k available (3407k kernel code, 14524k reserved, 1574k data, 328k init, 105352k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffaa000 - 0xfffff000   ( 340 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc05e0000 - 0xc0632000   ( 328 kB)
>      .data : 0xc0453dec - 0xc05dd7ac   (1574 kB)
>      .text : 0xc0100000 - 0xc0453dec   (3407 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5195.45 BogoMIPS (lpj=2597729)
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 128K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Celeron(R) CPU 2.60GHz stepping 09
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090320
>ACPI: setting ELCR to 0200 (from 0600)
>net_namespace: 748 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
>pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
>pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.1: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
>pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:02:00.0: reg 10 32bit mmio: [0xe0200000-0xe02007ff]
>pci 0000:02:00.0: reg 14 io port: [0x3400-0x347f]
>pci 0000:02:00.0: supports D2
>pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:01.0: reg 10 io port: [0x3000-0x30ff]
>pci 0000:02:01.0: reg 14 32bit mmio: [0xe0200800-0xe02008ff]
>pci 0000:02:01.0: supports D1 D2
>pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:02:04.0: supports D1 D2
>pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:04.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *9
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *9
>ACPI: PCI Interrupt Link [LNKE] (IRQs 7 11) *9
>ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *9
>ACPI: PCI Interrupt Link [LNKG] (IRQs 7 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *9
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>system 00:04: ioport range 0x600-0x60f has been reserved
>system 00:04: ioport range 0x700-0x70f has been reserved
>system 00:04: ioport range 0x800-0x80f has been reserved
>system 00:04: ioport range 0x1000-0x107f has been reserved
>system 00:04: ioport range 0x1180-0x11bf has been reserved
>system 00:04: ioport range 0x200-0x20f has been reserved
>system 00:04: ioport range 0xfe00-0xfe00 has been reserved
>system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
>pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:04.0:   IO window: 0x003800-0x0038ff
>pci 0000:02:04.0:   IO window: 0x003c00-0x003cff
>pci 0000:02:04.0:   PREFETCH window: 0x50000000-0x53ffffff
>pci 0000:02:04.0:   MEM window: 0x58000000-0x5bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
>pci 0000:00:1e.0:   MEM window: 0xe0200000-0xe02fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
>pci 0000:00:1e.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
>pci_bus 0000:02: resource 2 pref mem [0x50000000-0x53ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:03: resource 0 io:  [0x3800-0x38ff]
>pci_bus 0000:03: resource 1 io:  [0x3c00-0x3cff]
>pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff]
>pci_bus 0000:03: resource 3 mem: [0x58000000-0x5bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Machine check exception polling timer started.
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>DLM (built Jun 18 2009 20:03:20) installed
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>fuse init (API version 7.11)
>msgmni has been set to 1746
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered (default)
>io scheduler cfq registered
>pci 0000:00:02.0: Boot video device
>intel_rng: FWH not detected
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 855GM Chipset
>agpgart-intel 0000:00:00.0: detected 32636K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
>ACPI: AC Adapter [ACAD] (on-line)
>input: Power Button as /class/input/input0
>ACPI: Power Button [PWRF]
>input: Lid Switch as /class/input/input1
>ACPI: Lid Switch [LID]
>input: Power Button as /class/input/input2
>ACPI: Power Button [PWRB]
>input: Video Bus as /class/input/input3
>ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Switched to high resolution mode on CPU 0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>[drm] Initialized drm 1.1.0 20060810
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>serial 0000:00:1f.6: PCI INT B disabled
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
>pci 0000:00:1f.1: enabling device (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1810-0x1817
>    ide1: BM-DMA at 0x1818-0x181f
>Probing IDE interface ide0...
>ACPI: Battery Slot [BAT1] (battery present)
>hda: TOSHIBA MK3021GAS, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-gd driver 1.18
>hda: max request size: 128KiB
>hda: 58605120 sectors (30005 MB), CHS=58140/16/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
>ide-cd driver 5.00
>ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>NET: Registered protocol family 24
>PPPoL2TP kernel driver, V1.0
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>8139too 0000:02:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
>eth0: RealTek RTL8139 at 0x3000, 00:02:3f:ce:3a:ef, IRQ 11
>eth0:  Identified 8139 chip type 'RTL-8101'
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>SSFDC read-only Flash Translation layer
>yenta_cardbus 0000:02:04.0: CardBus bridge found [1179:ff00]
>yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:04.0: TI: mfunc 0x00111c12, devctl 0x44
>yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0058, PCI irq 10
>yenta_cardbus 0000:02:04.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>ehci_hcd 0000:00:1d.7: irq 5, io mem 0xe0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.30-gentoo-r1 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usbcore: registered new interface driver cdc_wdm
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:01: RTC can wake from S4
>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>EDAC MC: Ver: 2.1.0 Jun 18 2009
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_pci_dev_parity_clear()
>EDAC DEBUG: edac_sysfs_setup_mc_kset()
>EDAC DEBUG: edac_sysfs_setup_mc_kset() Registered '.../edac/mc' kobject
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (15854 buckets, 63416 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>xt_time: kernel timezone is -0000
>IPv4 over IPv4 tunneling driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>arp_tables: (C) 2002 David S. Miller
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Bridge firewalling registered
>SCTP: Hash tables configured (established 65536 bind 65536)
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>Using IPI Shortcut mode
>input: AT Translated Set 2 keyboard as /class/input/input4
>rtc_cmos 00:01: setting system clock to 2009-06-22 01:47:48 UTC (1245635268)
>input: PS/2 Mouse as /class/input/input5
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input6
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with writeback data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 3:3.
>Freeing unused kernel memory: 328k freed
>udev: starting version 141
>udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001840
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 5, io base 0x00001860
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>i915 0000:00:02.0: setting latency timer to 64
>i2c-adapter i2c-2: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-2: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>allocated 1024x768 fb: 0x01fff000, bo f6ae4000
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>[drm] LVDS-8: set mode 1024x768 d
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>intel8x0_measure_ac97_clock: measured 50873 usecs (2452 samples)
>intel8x0: clocking to 48000
>EXT3 FS on hda3, internal journal
>Adding 819272k swap on /dev/hda5.  Priority:-1 extents:1 across:819272k 
>microcode: CPU0 updated from revision 0x11 to 0x2e, date = 2004-08-11

Actions: View

Attachments on bug 22597: 27332 | 27333

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.