Attachment 28448 Details for Bug 23109 – dmesg rv710 X restart

dmesg rv710 X restart

dmesg.txt (text/plain), 30.13 KB, created by daniel on 2009-08-09 03:34:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: daniel

Created: 2009-08-09 03:34:30 UTC

Size: 30.13 KB

patch

obsolete

>IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfefff000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at e0000000 (gap: dff00000:10100000)
>NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 25 pages at ffff88002801f000, static data 70880 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029050
>Kernel command line: root=/dev/sda2 panic=5
>Initializing CPU#0
>NR_IRQS:512
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2612.204 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 20000000 size 32 MB
>Aperture pointing to e820 RAM. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>Memory: 4042480k/4718592k available (5245k kernel code, 525892k absent, 149452k reserved, 2176k data, 3656k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5226.09 BogoMIPS (lpj=8707346)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>tseg: 00dff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using C1E aware idle routine
>Freeing SMP alternatives: 39k freed
>ACPI: Core revision 20090320
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) Dual Core Processor 5050e stepping 02
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5225.48 BogoMIPS (lpj=8706368)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) Dual Core Processor 5050e stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (10452.57 BogoMIPS).
>net_namespace: 936 bytes
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  7978.800 MB/sec
>xor: using function: generic_sse (7978.800 MB/sec)
>NET: Registered protocol family 16
>node 0 link 0: io port [8000, ffff]
>TOM: 00000000e0000000 aka 3584M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [f4000000, fe02ffff]
>node 0 link 0: mmio [f0000000, f04fffff]
>TOM2: 0000000120000000 aka 4608M
>bus: [00,04] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [e0000000, f3ffffff]
>bus: 00 index 3 mmio: [f4000000, ffffffff]
>bus: 00 index 4 mmio: [120000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:09.1: reg 20 io port: [0x1c00-0x1c3f]
>pci 0000:00:09.1: reg 24 io port: [0x1c40-0x1c7f]
>pci 0000:00:09.1: PME# supported from D3hot D3cold
>pci 0000:00:09.1: PME# disabled
>pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0a.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
>pci 0000:00:0a.1: supports D1 D2
>pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.1: PME# disabled
>pci 0000:00:0c.0: reg 20 io port: [0xf400-0xf40f]
>pci 0000:00:0d.0: reg 10 io port: [0x9f0-0x9f7]
>pci 0000:00:0d.0: reg 14 io port: [0xbf0-0xbf3]
>pci 0000:00:0d.0: reg 18 io port: [0x970-0x977]
>pci 0000:00:0d.0: reg 1c io port: [0xb70-0xb73]
>pci 0000:00:0d.0: reg 20 io port: [0xe000-0xe00f]
>pci 0000:00:0d.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
>pci 0000:00:0d.1: reg 10 io port: [0x9e0-0x9e7]
>pci 0000:00:0d.1: reg 14 io port: [0xbe0-0xbe3]
>pci 0000:00:0d.1: reg 18 io port: [0x960-0x967]
>pci 0000:00:0d.1: reg 1c io port: [0xb60-0xb63]
>pci 0000:00:0d.1: reg 20 io port: [0xcc00-0xcc0f]
>pci 0000:00:0d.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
>pci 0000:00:0d.2: reg 10 io port: [0xc800-0xc807]
>pci 0000:00:0d.2: reg 14 io port: [0xc400-0xc403]
>pci 0000:00:0d.2: reg 18 io port: [0xc000-0xc007]
>pci 0000:00:0d.2: reg 1c io port: [0xbc00-0xbc03]
>pci 0000:00:0d.2: reg 20 io port: [0xb800-0xb80f]
>pci 0000:00:0d.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
>pci 0000:00:0e.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
>pci 0000:00:0e.1: PME# supported from D3hot D3cold
>pci 0000:00:0e.1: PME# disabled
>pci 0000:00:10.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
>pci 0000:00:10.0: reg 14 io port: [0xb400-0xb407]
>pci 0000:00:10.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff]
>pci 0000:00:10.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f]
>pci 0000:00:10.0: supports D1 D2
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:11.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff]
>pci 0000:00:11.0: reg 14 io port: [0xb000-0xb007]
>pci 0000:00:11.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff]
>pci 0000:00:11.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f]
>pci 0000:00:11.0: supports D1 D2
>pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:11.0: PME# disabled
>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:12.0: PME# disabled
>pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:17.0: PME# disabled
>pci 0000:00:0e.0: transparent bridge
>pci 0000:02:00.0: reg 10 64bit mmio: [0xfdfff000-0xfdfff07f]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff8000-0xfdffbfff]
>pci 0000:02:00.0: reg 20 io port: [0xac00-0xac7f]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xfdf00000-0xfdf7ffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:12.0: bridge io port: [0xa000-0xafff]
>pci 0000:00:12.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0xfdeff000-0xfdeff07f]
>pci 0000:03:00.0: reg 18 64bit mmio: [0xfdef8000-0xfdefbfff]
>pci 0000:03:00.0: reg 20 io port: [0x9c00-0x9c7f]
>pci 0000:03:00.0: reg 30 32bit mmio: [0xfde00000-0xfde7ffff]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:16.0: bridge io port: [0x9000-0x9fff]
>pci 0000:00:16.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
>pci 0000:04:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff]
>pci 0000:04:00.0: reg 18 64bit mmio: [0xfdde0000-0xfddeffff]
>pci 0000:04:00.0: reg 20 io port: [0x8c00-0x8cff]
>pci 0000:04:00.0: reg 30 32bit mmio: [0xfddc0000-0xfdddffff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.1: reg 10 64bit mmio: [0xfddfc000-0xfddfffff]
>pci 0000:04:00.1: supports D1 D2
>pci 0000:00:17.0: bridge io port: [0x8000-0x8fff]
>pci 0000:00:17.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
>pci 0000:00:17.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>raid6: int64x1   2160 MB/s
>raid6: int64x2   2930 MB/s
>raid6: int64x4   2371 MB/s
>raid6: int64x8   2193 MB/s
>raid6: sse2x1    3812 MB/s
>raid6: sse2x2    4906 MB/s
>raid6: sse2x4    5036 MB/s
>raid6: using algorithm sse2x4 (5036 MB/s)
>PCI: Using ACPI for IRQ routing
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:09: iomem range 0xcf400-0xcffff has been reserved
>system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:09: iomem range 0xfc000-0xfffff could not be reserved
>system 00:09: iomem range 0xfefff000-0xfefff0ff has been reserved
>system 00:09: iomem range 0xdfee0000-0xdfefffff could not be reserved
>system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:09: iomem range 0x0-0x9ffff could not be reserved
>system 00:09: iomem range 0x100000-0xdfedffff could not be reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
>system 00:09: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved
>system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved
>system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:0e.0:   IO window: disabled
>pci 0000:00:0e.0:   MEM window: disabled
>pci 0000:00:0e.0:   PREFETCH window: disabled
>pci 0000:00:12.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:12.0:   IO window: 0xa000-0xafff
>pci 0000:00:12.0:   MEM window: 0xfdf00000-0xfdffffff
>pci 0000:00:12.0:   PREFETCH window: disabled
>pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:16.0:   IO window: 0x9000-0x9fff
>pci 0000:00:16.0:   MEM window: 0xfde00000-0xfdefffff
>pci 0000:00:16.0:   PREFETCH window: disabled
>pci 0000:00:17.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:17.0:   IO window: 0x8000-0x8fff
>pci 0000:00:17.0:   MEM window: 0xfdd00000-0xfddfffff
>pci 0000:00:17.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>pci 0000:00:0e.0: setting latency timer to 64
>pci 0000:00:12.0: setting latency timer to 64
>pci 0000:00:16.0: setting latency timer to 64
>pci 0000:00:17.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
>pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
>pci_bus 0000:03: resource 0 io:  [0x9000-0x9fff]
>pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff]
>pci_bus 0000:04: resource 0 io:  [0x8000-0x8fff]
>pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff]
>pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1249810561.813:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>fuse init (API version 7.11)
>msgmni has been set to 7897
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>async_tx: api initialized (sync-only)
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0d.1: Enabling HT MSI Mapping
>pci 0000:00:0d.2: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0e.1: Enabling HT MSI Mapping
>pci 0000:00:10.0: Enabling HT MSI Mapping
>pci 0000:00:11.0: Enabling HT MSI Mapping
>pci 0000:00:12.0: Enabling HT MSI Mapping
>pci 0000:00:16.0: Enabling HT MSI Mapping
>pci 0000:00:17.0: Enabling HT MSI Mapping
>pci 0000:04:00.0: Boot video device
>pcieport-driver 0000:00:12.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:12.0: setting latency timer to 64
>pcieport-driver 0000:00:16.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:16.0: setting latency timer to 64
>pcieport-driver 0000:00:17.0: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:17.0: setting latency timer to 64
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN] (on)
>processor ACPI_CPU:00: registered as cooling_device1
>processor ACPI_CPU:01: registered as cooling_device2
>ACPI Warning (nspredef-0949): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20090320]
>ACPI: Expecting a [Reference] package element, found type 0
>ACPI: Invalid passive threshold
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>pci 0000:04:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:04:00.0: setting latency timer to 64
>[drm] Initialized radeon 1.30.0 20080528 for 0000:04:00.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>brd: module loaded
>loop: module loaded
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>sata_sil24 0000:02:00.0: version 1.1
>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
>sata_sil24 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
>sata_sil24 0000:02:00.0: setting latency timer to 64
>scsi0 : sata_sil24
>scsi1 : sata_sil24
>ata1: SATA max UDMA/100 host m128@0xfdfff000 port 0xfdff8000 irq 16
>ata2: SATA max UDMA/100 host m128@0xfdfff000 port 0xfdffa000 irq 16
>sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
>sata_sil24 0000:03:00.0: setting latency timer to 64
>scsi2 : sata_sil24
>scsi3 : sata_sil24
>ata3: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
>ata4: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
>sata_nv 0000:00:0d.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:0d.0: Using SWNCQ mode
>sata_nv 0000:00:0d.0: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
>ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:0d.1: Using SWNCQ mode
>sata_nv 0000:00:0d.1: setting latency timer to 64
>scsi6 : sata_nv
>scsi7 : sata_nv
>ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
>ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
>sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:0d.2: Using SWNCQ mode
>sata_nv 0000:00:0d.2: setting latency timer to 64
>scsi8 : sata_nv
>scsi9 : sata_nv
>ata9: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
>ata10: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
>forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
>forcedeth 0000:00:10.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:a4:06:77
>forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 23
>forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 23 (level, low) -> IRQ 23
>forcedeth 0000:00:11.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>ata7: SATA link down (SStatus 0 SControl 300)
>ata9: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7: SAMSUNG HD103UI, 1AA01113, max UDMA7
>ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata5.00: configured for UDMA/133
>forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:17:31:a4:12:d0
>forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:0a.1: setting latency timer to 64
>ehci_hcd 0000:00:0a.1: EHCI Host Controller
>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0a.1: debug port 1
>ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
>ohci_hcd 0000:00:0a.0: setting latency timer to 64
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0a.0: irq 21, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>md: raid1 personality registered for level 1
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>Bluetooth: Generic Bluetooth USB driver ver 0.5
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.20.
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
>HDA Intel 0000:00:0e.1: setting latency timer to 64
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 7 ports detected
>usb 1-9: new high speed USB device using ehci_hcd and address 4
>usb 1-9: configuration #1 chosen from 1 choice
>HDA Intel 0000:04:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:04:00.1: setting latency timer to 64
>hda-codec: No codec parser is available
>hda-intel: no codecs initialized
>HDA Intel 0000:04:00.1: PCI INT B disabled
>ALSA device list:
>  #0: HDA NVidia at 0xfe020000 irq 20
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 17
>Bridge firewalling registered
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 5050e processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0xe
>powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0x10
>powernow-k8:    2 : fid 0xe (2200 MHz), vid 0x12
>powernow-k8:    3 : fid 0xc (2000 MHz), vid 0x14
>powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x16
>powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x1a
>rtc_cmos 00:05: setting system clock to 2009-08-09 09:36:04 UTC (1249810564)
>usb 2-6: new full speed USB device using ohci_hcd and address 2
>ata1: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>usb 2-6: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.0/input/input2
>generic-usb 0003:046D:C51A.0001: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0a.0-6/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.1/input/input3
>generic-usb 0003:046D:C51A.0002: input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0a.0-6/input1
>usb 1-3.6: new full speed USB device using ehci_hcd and address 5
>usb 1-3.6: configuration #1 chosen from 1 choice
>hub 1-3.6:1.0: USB hub found
>hub 1-3.6:1.0: 3 ports detected
>usb 1-3.6.2: new full speed USB device using ehci_hcd and address 6
>usb 1-3.6.2: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:0a.1/usb1/1-3/1-3.6/1-3.6.2/1-3.6.2:1.0/input/input4
>generic-usb 0003:046D:C713.0003: input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:0a.1-3.6.2/input0
>usb 1-3.6.3: new full speed USB device using ehci_hcd and address 7
>usb 1-3.6.3: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:0a.1/usb1/1-3/1-3.6/1-3.6.3/1-3.6.3:1.0/input/input5
>logitech 0003:046D:C714.0004: input,hiddev97: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:0a.1-3.6.3/input0
>ata2: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD103UI  1AA0 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<5>sd 4:0:0:0: Attached scsi generic sg0 type 0
> sda1 sda2 sda3
>sd 4:0:0:0: [sda] Attached SCSI disk
>ata6: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>ata10: SATA link down (SStatus 0 SControl 300)
>Freeing unused kernel memory: 3656k freed
>alg: No test for xts(twofish) (xts(twofish-asm))
>EXT4-fs: barriers enabled
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-5 with ordered data mode
>kjournald2 starting: pid 1421, dev dm-5:8, commit interval 5 seconds
>udev: starting version 141
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>EXT4 FS on dm-5, internal journal on dm-5:8
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 3290, dev dm-3:8, commit interval 5 seconds
>EXT4 FS on dm-3, internal journal on dm-3:8
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-3 with ordered data mode
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 3291, dev dm-4:8, commit interval 5 seconds
>EXT4 FS on dm-4, internal journal on dm-4:8
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-4 with ordered data mode
>Adding 2097144k swap on /dev/mapper/crypt-swap.  Priority:-1 extents:1 across:2097144k 
>forcedeth 0000:00:10.0: irq 27 for MSI/MSI-X
>forcedeth 0000:00:11.0: irq 28 for MSI/MSI-X
>PPP generic driver version 2.4.2
>NET: Registered protocol family 24
>[drm] Setting GART location based on new memory map
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 2 usecs
>it87: Found IT8716F chip at 0x290, revision 0
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>HTB: quantum of class 10104 is small. Consider r2q change.
>Clocksource tsc unstable (delta = -295223111 ns)
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 14
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 2
>[drm] Resetting GPU
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 2
>[drm] Resetting GPU
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 15
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 29
>[drm] Resetting GPU
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 18
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 11
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 10
>[drm] Resetting GPU
>mtrr: no MTRR for e0000000,10000000 found
>[drm] Setting GART location based on new memory map
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 1 usecs
>[drm] Resetting GPU
>[drm] Setting GART location based on new memory map
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 1 usecs
>[drm] Resetting GPU
>mtrr: MTRR 5 not used
>[drm] Setting GART location based on new memory map
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 1 usecs
>[drm] Resetting GPU
>mtrr: MTRR 5 not used
>[drm] Setting GART location based on new memory map
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 1 usecs
>[drm] Resetting GPU
>[drm] Loading RV710 PFP Microcode
>[drm] Loading RV710 CP Microcode
>[drm] Resetting GPU
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 26
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 23
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 4
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 7
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 12
>[drm:radeon_cp_indirect] *ERROR* sending pending buffer 29

Actions: View

Attachments on bug 23109: 28302 | 28303 | 28350 | 28352 | 28448

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.