Attachment 28710 Details for Bug 23373 – GF9400: dmesg

GF9400: dmesg

gf9400-nouveau-xorg-lockup-dmesg.log (text/plain), 49.20 KB, created by Anssi Hannula on 2009-08-17 11:43:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Anssi Hannula

Created: 2009-08-17 11:43:27 UTC

Size: 49.20 KB

patch

obsolete

>Linux version 2.6.31-desktop586-0.rc6.1mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Aug 14 11:26:26 EDT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000006fef0000 (usable)
> BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS)
> BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data)
> BIOS-e820: 000000006ff00000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x6fef0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CDFFF write-protect
>  CE000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07FF00000 mask FFFF00000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 00c00000
>init_memory_mapping: 0000000000000000-00000000373fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 6f93c000 - 6fecef52
>Allocated new RAMDISK: 00769000 - 00cfbf52
>Move RAMDISK from 000000006f93c000 - 000000006fecef51 to 00769000 - 00cfbf51
>ACPI: RSDP 000f64d0 00014 (v00 GBT   )
>ACPI: RSDT 6fef3040 00034 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 6fef30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 6fef3180 079C9 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 6fef1800 00040
>ACPI: HPET 6fefacc0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 6fefad40 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: APIC 6fefabc0 00098 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>906MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 00009000 - 0000fe80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 0000764c64]    TEXT DATA BSS ==> [0000100000 - 0000764c64]
>  #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
>  #5 [0000765000 - 00007680fe]              BRK ==> [0000765000 - 00007680fe]
>  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
>  #7 [0000769000 - 0000cfbf52]      NEW RAMDISK ==> [0000769000 - 0000cfbf52]
>  #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
>found SMP MP-table at [c00f4b90] f4b90
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0006fef0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009e
>    0: 0x00000100 -> 0x0006fef0
>On node 0 totalpages: 458382
>free_area_init_node: node 0, pgdat c05fd1a0, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3966 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 1814 pages used for memmap
>  HighMem zone: 230364 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>SMP: Allowing 4 CPUs, 3 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 14 pages at c1e07000, static data 35100 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454800
>Kernel command line: initrd=/boot/cdrom/initrd.gz BOOT_IMAGE=/boot/vmlinuz xdriver=nouveau 3
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000373fe:0006fef0)
>Memory: 1804912k/1833920k available (3496k kernel code, 27684k reserved, 1840k data, 464k init, 928712k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffd54000 - 0xfffff000   (2732 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc0640000 - 0xc06b4000   ( 464 kB)
>      .data : 0xc046a242 - 0xc0636548   (1840 kB)
>      .text : 0xc0100000 - 0xc046a242   (3496 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>NR_IRQS:1280
>Fast TSC calibration using PIT
>Detected 2000.306 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.61 BogoMIPS (lpj=2000306)
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 512K
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Counters: Core2 events, Intel PMU driver.
>... version:                 2
>... bit width:               40
>... generic counters:        2
>... value mask:              000000ffffffffff
>... max period:              000000007fffffff
>... fixed-purpose counters:  3
>... counter mask:            0000000700000003
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Checking initramfs for custom DSDT
>ACPI: Aborted because no cpio magic.
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 13930 entries in 28 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Celeron(R) CPU          440  @ 2.00GHz stepping 01
>Brought up 1 CPUs
>Total of 1 processors activated (4000.61 BogoMIPS).
>CPU0 attaching NULL sched-domain.
>devtmpfs: initialized
>Booting paravirtualized kernel on bare hardware
>Time: 17:50:56  Date: 08/17/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:03.2: reg 10 io port: [0xc000-0xc03f]
>pci 0000:00:03.2: reg 20 io port: [0x1c00-0x1c3f]
>pci 0000:00:03.2: reg 24 io port: [0x1c80-0x1cbf]
>pci 0000:00:03.2: PME# supported from D3hot D3cold
>pci 0000:00:03.2: PME# disabled
>pci 0000:00:03.5: reg 10 32bit mmio: [0xe5100000-0xe517ffff]
>pci 0000:00:04.0: reg 10 32bit mmio: [0xe518b000-0xe518bfff]
>pci 0000:00:04.0: supports D1 D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:04.1: reg 10 32bit mmio: [0xe518c000-0xe518c0ff]
>pci 0000:00:04.1: supports D1 D2
>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.1: PME# disabled
>pci 0000:00:06.0: reg 10 32bit mmio: [0xe5189000-0xe5189fff]
>pci 0000:00:06.0: supports D1 D2
>pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:06.1: reg 10 32bit mmio: [0xe518a000-0xe518a0ff]
>pci 0000:00:06.1: supports D1 D2
>pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:06.1: PME# disabled
>pci 0000:00:08.0: reg 10 32bit mmio: [0xe5180000-0xe5183fff]
>pci 0000:00:08.0: PME# supported from D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:0a.0: reg 10 32bit mmio: [0xe5186000-0xe5186fff]
>pci 0000:00:0a.0: reg 14 io port: [0xc400-0xc407]
>pci 0000:00:0a.0: reg 18 32bit mmio: [0xe5187000-0xe51870ff]
>pci 0000:00:0a.0: reg 1c 32bit mmio: [0xe5188000-0xe518800f]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: reg 10 io port: [0x9f0-0x9f7]
>pci 0000:00:0b.0: reg 14 io port: [0xbf0-0xbf3]
>pci 0000:00:0b.0: reg 18 io port: [0x970-0x977]
>pci 0000:00:0b.0: reg 1c io port: [0xb70-0xb73]
>pci 0000:00:0b.0: reg 20 io port: [0xd800-0xd80f]
>pci 0000:00:0b.0: reg 24 32bit mmio: [0xe5184000-0xe5185fff]
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:01:05.0: reg 10 32bit mmio: [0xe5000000-0xe500ffff]
>pci 0000:01:05.0: reg 14 io port: [0x8000-0x801f]
>pci 0000:01:0e.0: reg 10 32bit mmio: [0xe5014000-0xe50147ff]
>pci 0000:01:0e.0: reg 14 32bit mmio: [0xe5010000-0xe5013fff]
>pci 0000:01:0e.0: supports D1 D2
>pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:01:0e.0: PME# disabled
>pci 0000:00:09.0: transparent bridge
>pci 0000:00:09.0: bridge io port: [0x8000-0x8fff]
>pci 0000:00:09.0: bridge 32bit mmio: [0xe5000000-0xe50fffff]
>pci 0000:02:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
>pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:02:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
>pci 0000:02:00.0: reg 24 io port: [0x9000-0x907f]
>pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:00:10.0: bridge io port: [0x9000-0x9fff]
>pci 0000:00:10.0: bridge 32bit mmio: [0xe2000000-0xe3ffffff]
>pci 0000:00:10.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
>pci 0000:03:00.0: reg 10 io port: [0xa000-0xa007]
>pci 0000:03:00.0: reg 14 io port: [0xa400-0xa403]
>pci 0000:03:00.0: reg 18 io port: [0xa800-0xa807]
>pci 0000:03:00.0: reg 1c io port: [0xac00-0xac03]
>pci 0000:03:00.0: reg 20 io port: [0xb000-0xb00f]
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:16.0: bridge io port: [0xa000-0xbfff]
>pci 0000:00:16.0: bridge 32bit mmio: [0xe4000000-0xe4ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31, 31
>hpet0: 4 comparators, 64-bit 25.000000 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
>system 00:01: iomem range 0x6ff00000-0x7fefffff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x294 has been reserved
>system 00:02: ioport range 0x880-0x88f has been reserved
>system 00:09: iomem range 0xe0000000-0xe1ffffff has been reserved
>system 00:0a: iomem range 0xd0000-0xd3fff has been reserved
>system 00:0a: iomem range 0xdaa00-0xdbfff has been reserved
>system 00:0a: iomem range 0xf0000-0xfbfff could not be reserved
>system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0a: iomem range 0x6fef0000-0x6fefffff could not be reserved
>system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:0a: iomem range 0x0-0x9ffff could not be reserved
>system 00:0a: iomem range 0x100000-0x6feeffff could not be reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: iomem range 0xfeff0000-0xfeff03ff has been reserved
>pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:09.0:   IO window: 0x8000-0x8fff
>pci 0000:00:09.0:   MEM window: 0xe5000000-0xe50fffff
>pci 0000:00:09.0:   PREFETCH window: disabled
>pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:10.0:   IO window: 0x9000-0x9fff
>pci 0000:00:10.0:   MEM window: 0xe2000000-0xe3ffffff
>pci 0000:00:10.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
>pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:16.0:   IO window: 0xa000-0xbfff
>pci 0000:00:16.0:   MEM window: 0xe4000000-0xe4ffffff
>pci 0000:00:16.0:   PREFETCH window: disabled
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:10.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
>pci 0000:00:16.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:16.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0x8000-0x8fff]
>pci_bus 0000:01: resource 1 mem: [0xe5000000-0xe50fffff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0x9000-0x9fff]
>pci_bus 0000:02: resource 1 mem: [0xe2000000-0xe3ffffff]
>pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xdfffffff]
>pci_bus 0000:03: resource 0 io:  [0xa000-0xbfff]
>pci_bus 0000:03: resource 1 mem: [0xe4000000-0xe4ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>rootfs image is not initramfs (no cpio magic); looks like an initrd
>Freeing initrd memory: 5707k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1250531455.341:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1724
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:02:00.0: Boot video device
>pcieport-driver 0000:00:16.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:16.0: setting latency timer to 64
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>PNP: No PS/2 controller found. Probing ports directly.
>Failed to disable AUX port, but continuing anyway... Is this a SiS?
>If AUX port is really absent please use the 'i8042.noaux' option.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 5:879:845
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
>RAMDISK: gzip image found at block 0
>VFS: Mounted root (ext2 filesystem) on device 1:0.
>Uniform Multi-Platform E-IDE driver
>ide-cd driver 5.00
>SCSI subsystem initialized
>loop: module loaded
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>squashfs: LZMA suppport for slax.org by jro
>Registering unionfs 1.4
>unionfs: debugging is not enabled
>libata version 3.00 loaded.
>pata_jmicron 0000:03:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
>pata_jmicron 0000:03:00.0: setting latency timer to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 16
>ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 16
>ata1.00: HPA detected: current 156299375, native 156301488
>ata1.00: ATA-7: ST380215A, 3.AAD, max UDMA/100
>ata1.00: 156299375 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST380215A        3.AA PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ohci1394 0000:01:0e.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[e5014000-e50147ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ahci 0000:00:0b.0: version 3.0
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ahci 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>ahci 0000:00:0b.0: irq 25 for MSI/MSI-X
>ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part 
>ahci 0000:00:0b.0: setting latency timer to 64
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata3: SATA max UDMA/133 abar m8192@0xe5184000 port 0xe5184100 irq 25
>ata4: SATA max UDMA/133 abar m8192@0xe5184000 port 0xe5184180 irq 25
>ata5: SATA max UDMA/133 abar m8192@0xe5184000 port 0xe5184200 irq 25
>ata6: SATA max UDMA/133 abar m8192@0xe5184000 port 0xe5184280 irq 25
>ata7: SATA max UDMA/133 abar m8192@0xe5184000 port 0xe5184300 irq 25
>ata8: SATA max UDMA/133 abar m8192@0xe5184000 port 0xe5184380 irq 25
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: TSSTcorp CDDVDW SN-S083B, SB01, max UDMA/100, ATAPI AN
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/100
>scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S083B  SB01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
>ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:04.1: setting latency timer to 64
>ehci_hcd 0000:00:04.1: EHCI Host Controller
>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:04.1: debug port 1
>ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:04.1: irq 22, io mem 0xe518c000
>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-desktop586-0.rc6.1mnb ehci_hcd
>usb usb1: SerialNumber: 0000:00:04.1
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21
>ehci_hcd 0000:00:06.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:06.1: setting latency timer to 64
>ehci_hcd 0000:00:06.1: EHCI Host Controller
>ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:06.1: debug port 1
>ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:06.1: irq 21, io mem 0xe518a000
>ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-desktop586-0.rc6.1mnb ehci_hcd
>usb usb2: SerialNumber: 0000:00:06.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
>ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:04.0: setting latency timer to 64
>ohci_hcd 0000:00:04.0: OHCI Host Controller
>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:04.0: irq 20, io mem 0xe518b000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31-desktop586-0.rc6.1mnb ohci_hcd
>usb usb3: SerialNumber: 0000:00:04.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
>ohci_hcd 0000:00:06.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:06.0: setting latency timer to 64
>ohci_hcd 0000:00:06.0: OHCI Host Controller
>ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:06.0: irq 23, io mem 0xe5189000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31-desktop586-0.rc6.1mnb ohci_hcd
>usb usb4: SerialNumber: 0000:00:06.0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>usb 1-2: New USB device found, idVendor=0ace, idProduct=1215
>usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0
>usb 1-2: Product: USB2.0 WLAN
>usb 1-2: Manufacturer: ZyDAS
>usb 1-2: configuration #1 chosen from 1 choice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00ac0a0200001fd0]
>usb 3-1: new low speed USB device using ohci_hcd and address 2
>usb 3-1: New USB device found, idVendor=1781, idProduct=0938
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: USB IR Transceiver
>usb 3-1: Manufacturer: IguanaWorks
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-5: new low speed USB device using ohci_hcd and address 3
>usb 3-5: New USB device found, idVendor=1267, idProduct=0103
>usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-5: configuration #1 chosen from 1 choice
>usb 3-6: new low speed USB device using ohci_hcd and address 4
>usb 3-6: New USB device found, idVendor=15c2, idProduct=0038
>usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-6: configuration #1 chosen from 1 choice
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>usb 2-1: New USB device found, idVendor=05e3, idProduct=0606
>usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-1: Product: USB2.0 Hub
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>usb 2-3: new high speed USB device using ehci_hcd and address 3
>usb 2-3: New USB device found, idVendor=15a4, idProduct=9016
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-3: Product: DVB-T 2
>usb 2-3: Manufacturer: Afatech
>usb 2-3: SerialNumber: 010101010600001
>usb 2-3: configuration #1 chosen from 1 choice
>usb 2-6: new high speed USB device using ehci_hcd and address 5
>usb 2-6: New USB device found, idVendor=0bda, idProduct=0151
>usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-6: Product: USB2.0-CRW
>usb 2-6: Manufacturer: Generic
>usb 2-6: SerialNumber: 20060413092100000
>usb 2-6: configuration #1 chosen from 1 choice
>usb 4-5: new low speed USB device using ohci_hcd and address 2
>usb 4-5: New USB device found, idVendor=046d, idProduct=c016
>usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-5: Product: Optical USB Mouse
>usb 4-5: Manufacturer: Logitech
>usb 4-5: configuration #1 chosen from 1 choice
>usb 2-1.1: new full speed USB device using ehci_hcd and address 6
>usb 2-1.1: device descriptor read/64, error -32
>usb 2-1.1: device descriptor read/64, error -32
>usb 2-1.1: new full speed USB device using ehci_hcd and address 7
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usb 2-1.1: device descriptor read/64, error -32
>usb 2-1.1: device descriptor read/64, error -32
>usb 2-1.1: new full speed USB device using ehci_hcd and address 8
>usb 2-1.1: device not accepting address 8, error -32
>usb 2-1.1: new full speed USB device using ehci_hcd and address 9
>usb 2-1.1: device not accepting address 9, error -32
>hub 2-1:1.0: unable to enumerate USB device on port 1
>scsi 8:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
>scsi 8:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
>scsi 8:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
>scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
>usb-storage: device scan complete
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>sr 2:0:0:0: [sr0] Unhandled sense code
>sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
>sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 358400
>Buffer I/O error on device sr0, logical block 44800
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>------------[ cut here ]------------
>WARNING: at fs/namei.c:1270 lookup_one_len+0xe8/0x100()
>Hardware name: GA-E7AUM-DS2H
>Modules linked in: sbp2 usb_storage ohci_hcd ehci_hcd usbcore ata_piix ahci ohci1394 ieee1394 pata_jmicron libata unionfs squashfs sqlzma unlzma loop isofs nls_utf8 nls_iso8859_15 nls_iso8859_14 nls_iso8859_13 nls_iso8859_9 nls_iso8859_7 nls_iso8859_6 nls_iso8859_5 nls_iso8859_4 nls_iso8859_3 nls_iso8859_2 nls_iso8859_1 sr_mod scsi_mod ide_cd_mod ide_core
>Pid: 86, comm: pivot_root Not tainted 2.6.31-desktop586-0.rc6.1mnb #1
>Call Trace:
> [<c0461b2e>] ? printk+0x28/0x42
> [<c014bc8d>] warn_slowpath_common+0x7d/0xc0
> [<c020d708>] ? lookup_one_len+0xe8/0x100
> [<c020d708>] ? lookup_one_len+0xe8/0x100
> [<c014bcf6>] warn_slowpath_null+0x26/0x40
> [<c020d708>] lookup_one_len+0xe8/0x100
> [<c02c7632>] ? strlcat+0x32/0x90
> [<f7e272d2>] unionfs_lookup_backend+0x3d2/0x8f0 [unionfs]
> [<c01f888c>] ? add_partial+0x2c/0x90
> [<c016f3e9>] ? put_cred_rcu+0x69/0xa0
> [<c014e439>] ? delayed_put_task_struct+0x49/0xa0
> [<f7e1e3ff>] unionfs_lookup+0x3f/0x70 [unionfs]
> [<c0285245>] ? security_capable+0x35/0x50
> [<c020d2ac>] do_lookup+0x15c/0x1d0
> [<c020df04>] __link_path_walk+0x674/0xc70
> [<c020e6d1>] path_walk+0x51/0xb0
> [<c020e7a1>] do_path_lookup+0x71/0xb0
> [<c020f53f>] user_path_at+0x4f/0x90
> [<c0285245>] ? security_capable+0x35/0x50
> [<c021ce22>] sys_pivot_root+0xb2/0x370
> [<c0467693>] ? do_page_fault+0x1c3/0x3b0
> [<c0463c0e>] ? down_write+0x1e/0x50
> [<c01041cc>] syscall_call+0x7/0xb
>---[ end trace 7884e577623251de ]---
>Freeing unused kernel memory: 464k freed
>Tomoyo security MAC extension available but disabled by default. If you want to
>enable and use it, ccs-tools package must be installed.
>cfg80211: Calling CRDA to update world regulatory domain
>scsi 0:0:0:0: Attached scsi generic sg0 type 0
>sr 2:0:0:0: Attached scsi generic sg1 type 5
>scsi 8:0:0:0: Attached scsi generic sg2 type 0
>scsi 8:0:0:1: Attached scsi generic sg3 type 0
>scsi 8:0:0:2: Attached scsi generic sg4 type 0
>scsi 8:0:0:3: Attached scsi generic sg5 type 0
>sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 8:0:0:0: [sdb] Attached SCSI removable disk
>sd 8:0:0:1: [sdc] Attached SCSI removable disk
>sd 8:0:0:2: [sdd] Attached SCSI removable disk
>sd 8:0:0:3: [sde] Attached SCSI removable disk
> sda1 sda2 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>ACPI: WMI: Mapper loaded
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>processor LNXCPU:00: registered as cooling_device0
>usbcore: registered new interface driver hiddev
>input: HID 1267:0103 as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5:1.0/input/input3
>generic-usb 0003:1267:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:04.0-5/input0
>input: HID 1267:0103 as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5:1.1/input/input4
>generic-usb 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:04.0-5/input1
>Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8
>input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.1/input/input5
>generic-usb 0003:15A4:9016.0003: input,hidraw2: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:06.1-3/input1
>input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:06.0/usb4/4-5/4-5:1.0/input/input6
>generic-usb 0003:046D:C016.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:06.0-5/input0
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>ACPI: I/O resource nForce2_smbus [0x1c80-0x1cbf] conflicts with ACPI region SM00 [0x1c80-0x1c85]
>ACPI: Device needs an ACPI driver
>nForce2_smbus 0000:00:03.2: Error probing SMB2.
>usb 1-2: reset high speed USB device using ehci_hcd and address 3
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:0a.0: setting latency timer to 64
>usbcore: registered new interface driver wacom
>wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:1f:d0:db:d6:c2
>forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
>dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
>phy0: Selected rate control algorithm 'minstrel'
>zd1211rw 1-2:1.0: phy0
>usbcore: registered new interface driver zd1211rw
>b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
>flexcop-pci: will use the HW PID filter.
>flexcop-pci: card revision 2
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>b2c2_flexcop_pci 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
>DVB: registering new adapter (FlexCop Digital TV device)
>b2c2-flexcop: MAC address = 00:d0:d7:09:de:e5
>CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
>CX24123: wrong demod revision: 87
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
>HDA Intel 0000:00:08.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:08.0: setting latency timer to 64
>af9013: firmware version:4.95.0
>DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
>tda18271 1-00c0: creating new instance
>TDA18271HD/C2 detected @ 1-00c0
>b2c2-flexcop: found 'Zarlink MT352 DVB-T' .
>DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)...
>b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
>hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS...
>autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   dig-out=0x1e/0x0
>   inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>   dig-in=0x1f
>realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
>realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input7
>dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
>usbcore: registered new interface driver dvb_usb_af9015
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>vboxadd: VirtualBox Guest PCI device not found.
>vboxadd: VirtualBox Guest PCI device not found.
>vboxvfs: Unknown symbol vboxadd_cmc_open
>vboxvfs: Unknown symbol RTLogBackdoorPrintf
>vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
>vboxvfs: Unknown symbol RTErrConvertToErrno
>vboxvfs: Unknown symbol vboxadd_cmc_call
>vboxvfs: Unknown symbol vboxadd_cmc_close
>vboxvfs: Unknown symbol AssertMsg2
>vboxvfs: Unknown symbol RTAssertShouldPanic
>vboxvfs: Unknown symbol AssertMsg1
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>Probing IDE interface ide0...
>ide0: no devices on the port
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide1: no devices on the port
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-gd driver 1.18
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>cfg80211: Calling CRDA for country: US
>cfg80211: Regulatory domain changed to country: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>usb 1-2: firmware: requesting zd1211/zd1211b_ub
>usb 1-2: firmware: requesting zd1211/zd1211b_uphr
>zd1211rw 1-2:1.0: firmware version 4725
>zd1211rw 1-2:1.0: zd1211b chip 0ace:1215 v4810 high 00-1a-9f AL2230_RF pa0 g--NS
>cfg80211: Calling CRDA for country: DE
>cfg80211: Current regulatory domain intersected: 
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1700 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: direct probe to AP 00:18:39:50:13:06 try 1
>wlan0 direct probe responded
>wlan0: authenticate with AP 00:18:39:50:13:06
>wlan0: authenticated
>wlan0: associate with AP 00:18:39:50:13:06
>wlan0: RX AssocResp from 00:18:39:50:13:06 (capab=0x431 status=12 aid=0)
>wlan0: AP denied association (code=12)
>wlan0: associate with AP 00:18:39:50:13:06
>wlan0: RX AssocResp from 00:18:39:50:13:06 (capab=0x431 status=12 aid=0)
>wlan0: AP denied association (code=12)
>wlan0: associate with AP 00:18:39:50:13:06
>wlan0: RX AssocResp from 00:18:39:50:13:06 (capab=0x431 status=12 aid=0)
>wlan0: AP denied association (code=12)
>NET: Registered protocol family 17
>wlan0: association with AP 00:18:39:50:13:06 timed out
>wlan0: authenticate with AP 00:18:39:50:13:06
>wlan0: authenticated
>wlan0: associate with AP 00:18:39:50:13:06
>wlan0: RX AssocResp from 00:18:39:50:13:06 (capab=0x431 status=0 aid=4)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
>nouveau 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20
>nouveau 0000:02:00.0: setting latency timer to 64
>nouveau 0000:02:00.0: Detected an NV50 generation card (0x0ac500b1)
>nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
>nouveau 0000:02:00.0: ... appears to be valid
>nouveau 0000:02:00.0: BIT BIOS found
>nouveau 0000:02:00.0: Bios version 62.79.3c.00
>nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
>nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
>nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 0000001e
>nouveau 0000:02:00.0: Raw DCB entry 1: 01011322 00020010
>nouveau 0000:02:00.0: Raw DCB entry 2: 0000000e 00000000
>nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xDB11
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF0A8 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF0A8 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF0A0 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF0A0 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x00102018 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x00102018 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF090 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF090 ==========
>nouveau 0000:02:00.0: ========== unknown reg 0x002FF090 ==========
>nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDDC5
>nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xDDC7
>nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDEAC
>nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDF71
>nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDFD6
>nouveau 0000:02:00.0: 0xDFD6: Condition: 0x01, Retries: 0x64
>nouveau 0000:02:00.0: 0xDFD6: Condition still not met after 0ms, skiping following opcodes
>nouveau 0000:02:00.0: 0xDFFD: Condition: 0x02, Retries: 0x64
>nouveau 0000:02:00.0: 0xC646: parsing output script 0
>[TTM] TTM available graphics memory: 884 MiB
>[TTM] TTM available object memory: 431 MiB
>nouveau 0000:02:00.0: Allocating FIFO number 1
>nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
>nouveau 0000:02:00.0: Detected a DAC output
>nouveau 0000:02:00.0: Detected a TMDS output
>nouveau 0000:02:00.0: Detected a VGA connector
>nouveau 0000:02:00.0: Detected a DVI-D connector
>allocated 1360x768 fb: 0x40230000, bo ef60da00
>[drm] TMDS-8: set mode 1360x768 13
>nouveau 0000:02:00.0: GPU lockup - switching to software fbcon
>nouveau 0000:02:00.0: 0xC664: parsing output script 1
>nouveau 0000:02:00.0: 0xC672: parsing output script 2
>nouveau 0000:02:00.0: 0xC3CC: parsing clock script 0
>Console: switching to colour frame buffer device 170x48
>fb0: nouveaufb frame buffer device
>registered panic notifier
>nouveau 0000:02:00.0: 0xBCD6: parsing clock script 1
>nouveau 0000:02:00.0: 0xBDAE: Condition: 0x08, Retries: 0x64
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
>nouveau 0000:02:00.0: Allocating FIFO number 2
>nouveau 0000:02:00.0: timed out with status 0x011fde03
>nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2

Actions: View

Attachments on bug 23373: 28710 | 28711

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.