Attachment 28898 Details for Bug 23508 – Xorg log file

Xorg log file

Xorg.0.log (text/plain), 39.61 KB, created by Mark Cooke on 2009-08-25 08:16:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mark Cooke

Created: 2009-08-25 08:16:54 UTC

Size: 39.61 KB

patch

obsolete

>
>X.Org X Server 1.6.1
>Release Date: 2009-4-14
>X Protocol Version 11, Revision 0
>Build Operating System: Linux_2.6.27.19-server-1mnb Mandriva
>Current Operating System: Linux localhost 2.6.29.6-desktop-2mnb #1 SMP Sun Aug 16 23:23:47 EDT 2009 i686
>Build Date: 26 May 2009  04:51:37AM
> 
>	Before reporting problems, check http://qa.mandriva.com
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 25 14:44:37 2009
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) ServerLayout "layout1"
>(**) |-->Screen "screen1" (0)
>(**) |   |-->Monitor "monitor1"
>(**) |   |-->Device "device1"
>(**) |-->Input Device "Keyboard1"
>(**) |-->Input Device "Mouse1"
>(**) |-->Input Device "Stylus1"
>(**) |-->Input Device "Eraser1"
>(**) |-->Input Device "Cursor1"
>(**) |-->Input Device "Pad1"
>(**) Option "AllowMouseOpenFail"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
>(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
>(WW) Disabling Keyboard1
>(WW) Disabling Mouse1
>(II) Loader magic: 0x3bc0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 4.0
>	X.Org Server Extension : 2.0
>(II) Loader running on linux
>(++) using VT number 7
>
>(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] rev 0, Mem @ 0xf0000000/134217728, 0xe7800000/65536, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>(II) "record" will be loaded by default.
>(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>(II) "dri2" will be loaded by default.
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "v4l"
>(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
>(II) Module v4l: vendor="X.Org Foundation"
>	compiled for 1.5.99.3, module version = 0.1.1
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension Multi-Buffering
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "type1"
>(WW) Warning, couldn't open module type1
>(II) UnloadModule: "type1"
>(EE) Failed to load module "type1" (module does not exist, 0)
>(II) LoadModule: "freetype"
>(WW) Warning, couldn't open module freetype
>(II) UnloadModule: "freetype"
>(EE) Failed to load module "freetype" (module does not exist, 0)
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "ati"
>(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
>(II) Module ati: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 6.12.2
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "radeon"
>(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
>(II) Module radeon: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 6.12.2
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "wacom"
>(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
>(II) Module wacom: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(II) Wacom driver level: 47-0.8.3-2 $
>(II) v4l driver for Video4Linux
>(II) RADEON: Driver for ATI Radeon chipsets:
>	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
>	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
>	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
>	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
>	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
>	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
>	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
>	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
>	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
>	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
>	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
>	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
>	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
>	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
>	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
>	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
>	ATI Radeon X800PRO (R420) JI (AGP),
>	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
>	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
>	ATI Radeon Mobility 9800 (M18) JN (AGP),
>	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
>	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
>	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
>	ATI Radeon Mobility M7 LW (AGP),
>	ATI Mobility FireGL 7800 M7 LX (AGP),
>	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
>	ATI FireGL Mobility 9000 (M9) Ld (AGP),
>	ATI Radeon Mobility 9000 (M9) Lf (AGP),
>	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
>	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
>	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
>	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
>	ATI Radeon 9800XT NJ (AGP),
>	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
>	ATI Radeon Mobility 9600 (M10) NQ (AGP),
>	ATI Radeon Mobility 9600 (M11) NR (AGP),
>	ATI Radeon Mobility 9600 (M10) NS (AGP),
>	ATI FireGL Mobility T2 (M10) NT (AGP),
>	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
>	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
>	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
>	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
>	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
>	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
>	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
>	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
>	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
>	ATI Radeon X800PRO (R423) UI (PCIE),
>	ATI Radeon X800LE (R423) UJ (PCIE),
>	ATI Radeon X800SE (R423) UK (PCIE),
>	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
>	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
>	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
>	ATI FireGL unknown (R423) UR (PCIE),
>	ATI FireGL unknown (R423) UT (PCIE),
>	ATI Mobility FireGL V5000 (M26) (PCIE),
>	ATI Mobility FireGL V5000 (M26) (PCIE),
>	ATI Mobility Radeon X700 XL (M26) (PCIE),
>	ATI Mobility Radeon X700 (M26) (PCIE),
>	ATI Mobility Radeon X700 (M26) (PCIE),
>	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
>	ATI Radeon Mobility 9100 IGP (U3) 5835,
>	ATI Radeon XPRESS 200 5954 (PCIE),
>	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
>	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
>	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
>	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
>	ATI Radeon XPRESS 200M 5975 (PCIE),
>	ATI Radeon XPRESS 200 5A41 (PCIE),
>	ATI Radeon XPRESS 200M 5A42 (PCIE),
>	ATI Radeon XPRESS 200 5A61 (PCIE),
>	ATI Radeon XPRESS 200M 5A62 (PCIE),
>	ATI Radeon X300 (RV370) 5B60 (PCIE),
>	ATI Radeon X600 (RV370) 5B62 (PCIE),
>	ATI Radeon X550 (RV370) 5B63 (PCIE),
>	ATI FireGL V3100 (RV370) 5B64 (PCIE),
>	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
>	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
>	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
>	ATI Mobility Radeon X800 XT (M28) (PCIE),
>	ATI Mobility FireGL V5100 (M28) (PCIE),
>	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
>	ATI Radeon X850 XT PE (R480) (PCIE),
>	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
>	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
>	ATI Radeon X850 XT (R480) (PCIE),
>	ATI Radeon X800XT (R423) 5D57 (PCIE),
>	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
>	ATI Radeon X700 PRO (RV410) (PCIE),
>	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
>	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
>	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
>	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
>	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
>	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
>	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
>	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
>	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
>	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
>	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
>	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
>	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
>	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
>	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
>	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
>	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
>	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
>	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
>	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
>	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
>	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
>	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
>	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
>	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
>	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
>	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
>	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
>	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
>	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
>	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
>	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
>	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
>	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
>	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
>	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
>	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
>	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
>	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
>	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
>	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
>	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
>	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
>	ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
>	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
>	ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
>	ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
>	ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
>	ATI Mobility RADEON M98, ATI Radeon 4800 Series,
>	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
>	ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
>	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
>	ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
>	ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
>	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
>	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
>	ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
>	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
>	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
>	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
>	ATI Mobility Radeon HD 3850 X2, ATI RV670,
>	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
>	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
>	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
>	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
>	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
>	ATI Mobility Radeon 4500 Series, ATI RV630,
>	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
>	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
>	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
>	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
>	ATI FireGL V3600, ATI Radeon HD 2600 LE,
>	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
>	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
>	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
>	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
>	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
>	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
>	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
>	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
>	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
>	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
>	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
>	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
>	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
>	ATI Radeon HD Graphics, ATI Radeon Graphics,
>	ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
>	ATI Radeon Graphics
>(II) Primary Device is: PCI 01@00:00:0
>(WW) Falling back to old probe method for v4l
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Setting vga for screen 0.
>(II) RADEON(0): TOTO SAYS 00000000e7800000
>(II) RADEON(0): MMIO registers at 0x00000000e7800000: size 64KB
>(II) RADEON(0): PCI bus 1 card 0 func 0
>(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
>(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
>(==) RADEON(0): Default visual is TrueColor
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(==) RADEON(0): RGB weight 888
>(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
>(--) RADEON(0): Chipset: "ATI Radeon 8500 QL (AGP)" (ChipID = 0x514c)
>(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
>(II) RADEON(0): AGP card detected
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/lib/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) RADEON(0): initializing int10
>(II) RADEON(0): Bad V_BIOS checksum
>(II) RADEON(0): Primary V_BIOS segment is: 0xc000
>(II) RADEON(0): Legacy BIOS detected
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: drmOpenMinor returns 10
>drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
>(==) RADEON(0): Page Flipping disabled
>(II) RADEON(0): Will try to use DMA for Xv image transfers
>(II) RADEON(0): Detected total video RAM=65536K, accessible=65536K (PCI BAR=131072K)
>(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
>(II) RADEON(0): Color tiling enabled by default
>(II) RADEON(0): Max desktop size set to 2048x1200
>(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
>(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 25000, sclk: 250.000000, mclk: 250.000000
>(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=25000
>(II) RADEON(0): DFP table revision: 3
>(II) RADEON(0): Output VGA-0 using monitor section monitor1
>(II) RADEON(0): I2C bus "VGA-0" initialized.
>(II) RADEON(0): Output DVI-0 has no monitor section
>(II) RADEON(0): I2C bus "DVI-0" initialized.
>(II) RADEON(0): Port0:
>  XRANDR name: VGA-0
>  Connector: VGA
>  CRT1: INTERNAL_DAC1
>  DDC reg: 0x60
>(II) RADEON(0): Port1:
>  XRANDR name: DVI-0
>  Connector: DVI-I
>  CRT2: INTERNAL_DAC2
>  DFP1: INTERNAL_TMDS1
>  DDC reg: 0x64
>(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
>(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>finished output detect: 0
>(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
>(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0
>finished output detect: 1
>finished all detect
>before xf86InitialConfiguration
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>(II) RADEON(0): Adding Screen mode: 1400x1050
>(II) RADEON(0): Adding Screen mode: 1280x1024
>(II) RADEON(0): Adding Screen mode: 1280x960
>(II) RADEON(0): Adding Screen mode: 1152x864
>(II) RADEON(0): Adding Screen mode: 1024x768
>(II) RADEON(0): Adding Screen mode: 832x624
>(II) RADEON(0): Adding Screen mode: 800x600
>(II) RADEON(0): Adding Screen mode: 640x480
>(II) RADEON(0): Adding Screen mode: 480x360
>(II) RADEON(0): Adding Screen mode: 320x240
>(II) RADEON(0): Total number of valid Screen mode(s) added: 10
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0
>(II) RADEON(0): Output VGA-0 connected
>(II) RADEON(0): Output DVI-0 disconnected
>(II) RADEON(0): Using user preference for initial modes
>(II) RADEON(0): Output VGA-0 using initial mode 1400x1050
>after xf86InitialConfiguration
>(==) RADEON(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(==) RADEON(0): Using XAA acceleration architecture
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/lib/xorg/modules//libxaa.so
>(II) Module xaa: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.2.1
>	ABI class: X.Org Video Driver, version 5.0
>(==) RADEON(0): Assuming overlay scaler buffer width is 1920
>(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
>(!!) RADEON(0): For information on using the multimedia capabilities
>	of this adapter, please see http://gatos.sf.net.
>(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
>(--) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) RADEON(0): RADEONScreenInit f0000000 0 0
>disable primary dac
>(==) RADEON(0): Using 24 bit depth buffer
>(II) RADEON(0): RADEONInitMemoryMap() : 
>(II) RADEON(0):   mem_size         : 0x04000000
>(II) RADEON(0):   MC_FB_LOCATION   : 0xf3fff000
>(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
>(II) RADEON(0): Depth moves disabled by default
>(II) RADEON(0): Using 8 MB GART aperture
>(II) RADEON(0): Using 1 MB for the ring buffer
>(II) RADEON(0): Using 2 MB for vertex/indirect buffers
>(II) RADEON(0): Using 5 MB for GART textures
>(II) RADEON(0): Memory manager initialized to (0,0) (1600,8191)
>(II) RADEON(0): Reserved area from (0,1200) to (1600,1202)
>(II) RADEON(0): Largest offscreen area available: 1600 x 6989
>(II) RADEON(0): Will use front buffer at offset 0x0
>(II) RADEON(0): Will use back buffer at offset 0xf55000
>(II) RADEON(0): Will use depth buffer at offset 0x16a8000
>(II) RADEON(0): Will use 34816 kb for textures at offset 0x1dfb000
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 10, (OK)
>drmOpenByBusid: drmOpenMinor returns 10
>drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
>(II) RADEON(0): [drm] added 1 reserved context for kernel
>(II) RADEON(0): X context handle = 0x1
>(II) RADEON(0): [drm] installed DRM signal handler
>(==) RADEON(0): Using AGP 4x
>(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0648; Card 0x1002/0x514c 0x1787/0x0f08]
>(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
>(II) RADEON(0): [agp] ring handle = 0xe8000000
>(II) RADEON(0): [agp] Ring mapped at 0xb372b000
>(II) RADEON(0): [agp] ring read ptr handle = 0xe8101000
>(II) RADEON(0): [agp] Ring read ptr mapped at 0xb80b3000
>(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe8102000
>(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb352b000
>(II) RADEON(0): [agp] GART texture map handle = 0xe8302000
>(II) RADEON(0): [agp] GART Texture map mapped at 0xb304b000
>(II) RADEON(0): [drm] register handle = 0x2cf00000
>(II) RADEON(0): [dri] Visual configs initialized
>(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
>(II) RADEON(0):   MC_FB_LOCATION   : 0xf3fff000 0x1fff0000
>(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
>(==) RADEON(0): Backing store disabled
>(II) RADEON(0): [DRI] installation complete
>(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
>(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
>(II) RADEON(0): [drm] dma control initialized, using IRQ 16
>(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
>(WW) RADEON(0): DRI init changed memory map, adjusting ...
>(WW) RADEON(0):   MC_FB_LOCATION  was: 0xf3fff000 is: 0xf3fff000
>(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe87fe800
>(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
>(II) RADEON(0):   MC_FB_LOCATION   : 0xf3fff000 0xf3fff000
>(II) RADEON(0):   MC_AGP_LOCATION  : 0xe87fe800
>(II) RADEON(0): Direct rendering enabled
>(II) RADEON(0): Render acceleration enabled
>(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
>	Screen to screen bit blits
>	Solid filled rectangles
>	8x8 mono pattern filled rectangles
>	Indirect CPU to Screen color expansion
>	Solid Lines
>	Scanline Image Writes
>	Setting up tile and stipple cache:
>		32 128x128 slots
>		32 256x256 slots
>		16 512x512 slots
>(II) RADEON(0): Acceleration enabled
>(**) RADEON(0): DPMS enabled
>(==) RADEON(0): Silken mouse enabled
>(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00756200
>(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x0075ad00
>(II) RADEON(0): Largest offscreen area available: 1600 x 6983
>(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
>(II) Loading sub module "theatre_detect"
>(II) LoadModule: "theatre_detect"
>(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
>(II) Module theatre_detect: vendor="X.Org Foundation"
>	compiled for 1.6.1, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
>(II) RADEON(0): Set up overlay video
>(II) RADEON(0): Set up textured video
>disable primary dac
>disable primary dac
>init memmap
>init common
>init crtc1
>init pll1
>freq: 155800000
>best_freq: 155797297
>best_feedback_div: 427
>best_ref_div: 37
>best_post_div: 2
>restore memmap
>(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
>(II) RADEON(0):   MC_FB_LOCATION   : 0xf3fff000 0xf3fff000
>(II) RADEON(0):   MC_AGP_LOCATION  : 0xe87fe800
>restore common
>restore crtc1
>restore pll1
>finished PLL1
>set RMX
>set primary dac
>enable primary dac
>(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension XFree86-Bigfont
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: Screen 0 is not DRI2 capable
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: drmOpenMinor returns 11
>drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_make_current_read
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
>(II) AIGLX: Loaded and initialized /usr/lib/dri/r200_dri.so
>(II) GLX: Initialized DRI GL provider for screen 0
>(II) RADEON(0): Setting screen physical size to 370 x 277
>(**) Option "SendCoreEvents"
>(**) Stylus1: always reports core events
>(**) Stylus1 device is /dev/input/by-id/usb-Wacom_Co._Ltd._MTE-450-event-mouse
>(**) Stylus1 is in absolute mode
>(**) WACOM: suppress value is 2
>(**) Option "BaudRate" "9600"
>(**) Stylus1: serial speed 9600
>(II) XINPUT: Adding extended input device "Stylus1" (type: Wacom Stylus)
>(**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._MTE-450-event-mouse"
>Stylus1 Wacom X driver grabbed event device
>(==) Wacom using pressure threshold of 30 for button 1
>(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
>(==) Wacom device "Stylus1" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(**) Option "SendCoreEvents"
>(**) Eraser1: always reports core events
>(**) Eraser1 device is /dev/input/by-id/usb-Wacom_Co._Ltd._MTE-450-event-mouse
>(**) Eraser1 is in absolute mode
>(**) WACOM: suppress value is 2
>(**) Eraser1: reading USB link
>(**) Eraser1: threshold = 30
>(**) Eraser1: max x set to 14760 by xorg.conf
>(**) Eraser1: max y set to 9225 by xorg.conf
>(**) Eraser1: max z = 511
>(**) Option "BaudRate" "9600"
>(**) Eraser1: serial speed 9600
>(II) XINPUT: Adding extended input device "Eraser1" (type: Wacom Eraser)
>(==) Wacom device "Eraser1" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(**) Option "SendCoreEvents"
>(**) Cursor1: always reports core events
>(**) Cursor1 device is /dev/input/by-id/usb-Wacom_Co._Ltd._MTE-450-event-mouse
>(**) Cursor1 is in relative mode
>(**) WACOM: suppress value is 2
>(**) Cursor1: reading USB link
>(**) Cursor1: threshold = 30
>(**) Cursor1: max x set to 14760 by xorg.conf
>(**) Cursor1: max y set to 9225 by xorg.conf
>(**) Cursor1: max z = 511
>(**) Option "BaudRate" "9600"
>(**) Cursor1: serial speed 9600
>(II) XINPUT: Adding extended input device "Cursor1" (type: Wacom Cursor)
>(==) Wacom device "Cursor1" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(**) Option "SendCoreEvents"
>(**) Pad1: always reports core events
>(**) Pad1 device is /dev/input/by-id/usb-Wacom_Co._Ltd._MTE-450-event-mouse
>(**) Pad1 is in relative mode
>(**) WACOM: suppress value is 2
>(**) Pad1: reading USB link
>(**) Pad1: threshold = 30
>(**) Pad1: max x set to 14760 by xorg.conf
>(**) Pad1: max y set to 9225 by xorg.conf
>(**) Pad1: max z = 511
>(**) Option "BaudRate" "9600"
>(**) Pad1: serial speed 9600
>(II) XINPUT: Adding extended input device "Pad1" (type: Wacom Pad)
>(==) Wacom device "Pad1" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(II) config/hal: Adding input device Wacom Bamboo
>(**) Wacom Bamboo: always reports core events
>(**) Wacom Bamboo device is /dev/input/event3
>(**) Wacom Bamboo is in absolute mode
>(**) WACOM: suppress value is 2
>(**) Option "BaudRate" "9600"
>(**) Wacom Bamboo: serial speed 9600
>(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: Wacom Stylus)
>(**) Option "Device" "/dev/input/event3"
>Wacom Bamboo Wacom X driver can't grab event device, errno=16
>(==) Wacom using pressure threshold of 30 for button 1
>(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
>(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(II) config/hal: Adding input device Power Button (CM)
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.2.1
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(**) Power Button (CM): always reports core events
>(**) Power Button (CM): Device: "/dev/input/event2"
>(II) Power Button (CM): Found keys
>(II) Power Button (CM): Configuring as keyboard
>(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "gb"
>(**) Option "xkb_options" "compose:rwin"
>(II) config/hal: Adding input device Wacom Bamboo pad
>(**) Wacom Bamboo pad: always reports core events
>(**) Wacom Bamboo pad device is /dev/input/event3
>(**) Wacom Bamboo pad is in relative mode
>(**) WACOM: suppress value is 2
>(**) Wacom Bamboo pad: reading USB link
>(**) Wacom Bamboo pad: threshold = 30
>(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
>(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
>(**) Wacom Bamboo pad: max z = 511
>(**) Option "BaudRate" "9600"
>(**) Wacom Bamboo pad: serial speed 9600
>(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: Wacom Pad)
>(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(II) config/hal: Adding input device Power Button (FF)
>(**) Power Button (FF): always reports core events
>(**) Power Button (FF): Device: "/dev/input/event1"
>(II) Power Button (FF): Found keys
>(II) Power Button (FF): Configuring as keyboard
>(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "gb"
>(**) Option "xkb_options" "compose:rwin"
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "gb"
>(**) Option "xkb_options" "compose:rwin"
>(II) config/hal: Adding input device Wacom Bamboo cursor
>(**) Wacom Bamboo cursor: always reports core events
>(**) Wacom Bamboo cursor device is /dev/input/event3
>(**) Wacom Bamboo cursor is in relative mode
>(**) WACOM: suppress value is 2
>(**) Wacom Bamboo cursor: reading USB link
>(**) Wacom Bamboo cursor: threshold = 30
>(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
>(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
>(**) Wacom Bamboo cursor: max z = 511
>(**) Option "BaudRate" "9600"
>(**) Wacom Bamboo cursor: serial speed 9600
>(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: Wacom Cursor)
>(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(II) config/hal: Adding input device Wacom Bamboo eraser
>(**) Wacom Bamboo eraser: always reports core events
>(**) Wacom Bamboo eraser device is /dev/input/event3
>(**) Wacom Bamboo eraser is in absolute mode
>(**) WACOM: suppress value is 2
>(**) Wacom Bamboo eraser: reading USB link
>(**) Wacom Bamboo eraser: threshold = 30
>(**) Wacom Bamboo eraser: max x set to 14760 by xorg.conf
>(**) Wacom Bamboo eraser: max y set to 9225 by xorg.conf
>(**) Wacom Bamboo eraser: max z = 511
>(**) Option "BaudRate" "9600"
>(**) Wacom Bamboo eraser: serial speed 9600
>(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: Wacom Eraser)
>(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>(II) RADEON(0): Adding Screen mode: 1400x1050
>(II) RADEON(0): Adding Screen mode: 1280x1024
>(II) RADEON(0): Adding Screen mode: 1280x960
>(II) RADEON(0): Adding Screen mode: 1152x864
>(II) RADEON(0): Adding Screen mode: 1024x768
>(II) RADEON(0): Adding Screen mode: 832x624
>(II) RADEON(0): Adding Screen mode: 800x600
>(II) RADEON(0): Adding Screen mode: 640x480
>(II) RADEON(0): Adding Screen mode: 480x360
>(II) RADEON(0): Adding Screen mode: 320x240
>(II) RADEON(0): Total number of valid Screen mode(s) added: 10
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>(II) RADEON(0): Adding Screen mode: 1400x1050
>(II) RADEON(0): Adding Screen mode: 1280x1024
>(II) RADEON(0): Adding Screen mode: 1280x960
>(II) RADEON(0): Adding Screen mode: 1152x864
>(II) RADEON(0): Adding Screen mode: 1024x768
>(II) RADEON(0): Adding Screen mode: 832x624
>(II) RADEON(0): Adding Screen mode: 800x600
>(II) RADEON(0): Adding Screen mode: 640x480
>(II) RADEON(0): Adding Screen mode: 480x360
>(II) RADEON(0): Adding Screen mode: 320x240
>(II) RADEON(0): Total number of valid Screen mode(s) added: 10
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>(II) RADEON(0): Adding Screen mode: 1400x1050
>(II) RADEON(0): Adding Screen mode: 1280x1024
>(II) RADEON(0): Adding Screen mode: 1280x960
>(II) RADEON(0): Adding Screen mode: 1152x864
>(II) RADEON(0): Adding Screen mode: 1024x768
>(II) RADEON(0): Adding Screen mode: 832x624
>(II) RADEON(0): Adding Screen mode: 800x600
>(II) RADEON(0): Adding Screen mode: 640x480
>(II) RADEON(0): Adding Screen mode: 480x360
>(II) RADEON(0): Adding Screen mode: 320x240
>(II) RADEON(0): Total number of valid Screen mode(s) added: 10
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0
>disable primary dac
>init memmap
>init common
>init crtc1
>init pll1
>freq: 179260000
>best_freq: 175000000
>best_feedback_div: 350
>best_ref_div: 27
>best_post_div: 2
>restore memmap
>(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
>(II) RADEON(0):   MC_FB_LOCATION   : 0xf3fff000 0xf3fff000
>(II) RADEON(0):   MC_AGP_LOCATION  : 0xe87fe800
>restore common
>restore crtc1
>restore pll1
>finished PLL1
>set RMX
>set primary dac
>enable primary dac
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>(II) RADEON(0): Adding Screen mode: 1400x1050
>(II) RADEON(0): Adding Screen mode: 1280x1024
>(II) RADEON(0): Adding Screen mode: 1280x960
>(II) RADEON(0): Adding Screen mode: 1152x864
>(II) RADEON(0): Adding Screen mode: 1024x768
>(II) RADEON(0): Adding Screen mode: 832x624
>(II) RADEON(0): Adding Screen mode: 800x600
>(II) RADEON(0): Adding Screen mode: 640x480
>(II) RADEON(0): Adding Screen mode: 480x360
>(II) RADEON(0): Adding Screen mode: 320x240
>(II) RADEON(0): Total number of valid Screen mode(s) added: 10
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0
>(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
>(II) RADEON(0): Found color CRT connected to primary DAC
>(II) RADEON(0): Adding Screen mode: 1400x1050
>(II) RADEON(0): Adding Screen mode: 1280x1024
>(II) RADEON(0): Adding Screen mode: 1280x960
>(II) RADEON(0): Adding Screen mode: 1152x864
>(II) RADEON(0): Adding Screen mode: 1024x768
>(II) RADEON(0): Adding Screen mode: 832x624
>(II) RADEON(0): Adding Screen mode: 800x600
>(II) RADEON(0): Adding Screen mode: 640x480
>(II) RADEON(0): Adding Screen mode: 480x360
>(II) RADEON(0): Adding Screen mode: 320x240
>(II) RADEON(0): Total number of valid Screen mode(s) added: 10
>(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
>Unhandled monitor type 0

Actions: View

Attachments on bug 23508: 28897 | 28898 | 29106 | 29107 | 29108

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.