Attachment 29411 Details for Bug 23860 – dmesg output (with drm.debug=0xf)

dmesg output (with drm.debug=0xf)

dmesg.txt (text/plain), 60.01 KB, created by Henning Rohlfs on 2009-09-11 04:27:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Henning Rohlfs

Created: 2009-09-11 04:27:12 UTC

Size: 60.01 KB

patch

obsolete

>Linux version 2.6.31-rc9-27054-g6cf8a3f (root@honk) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #6 SMP PREEMPT Fri Sep 11 08:59:00 CEST 2009
>Command line: root=/dev/md12 quiet fastboot ro
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
> BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
> BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
> BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
> BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x240000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 base 000080000000 mask FFFFC0000000 write-back
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>TOM2: 0000000240000000 aka 9216M
>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000bffb0000
> 0000000000 - 0080000000 page 1G
> 0080000000 - 00bfe00000 page 2M
> 00bfe00000 - 00bffb0000 page 4k
>kernel direct mapping tables up to bffb0000 @ 10000-13000
>init_memory_mapping: 0000000100000000-0000000240000000
> 0100000000 - 0240000000 page 1G
>kernel direct mapping tables up to 240000000 @ 12000-13000
>ACPI: RSDP 00000000000fac40 00024 (v02 ACPIAM)
>ACPI: XSDT 00000000bffb0100 00054 (v01 032008 OEMXSDT  20080320 MSFT 00000097)
>ACPI: FACP 00000000bffb0290 000F4 (v03 032008 OEMFACP  20080320 MSFT 00000097)
>ACPI: DSDT 00000000bffb0440 09470 (v01  P0001 P0001000 00000000 INTL 20051117)
>ACPI: FACS 00000000bffbe000 00040
>ACPI: APIC 00000000bffb0390 0006C (v01 032008 OEMAPIC  20080320 MSFT 00000097)
>ACPI: MCFG 00000000bffb0400 0003C (v01 032008 OEMMCFG  20080320 MSFT 00000097)
>ACPI: OEMB 00000000bffbe040 00071 (v01 032008 AMI_OEM  20080320 MSFT 00000097)
>ACPI: HPET 00000000bffb98b0 00038 (v01 032008 OEMHPET  20080320 MSFT 00000097)
>ACPI: SSDT 00000000bffb98f0 00544 (v01 A M I  POWERNOW 00000001 AMD  00000001)
>ACPI: Local APIC address 0xfee00000
>(6 early reservations) ==> bootmem [0000000000 - 0240000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0001a061d4]    TEXT DATA BSS ==> [0001000000 - 0001a061d4]
>  #3 [0000097c00 - 0000100000]    BIOS reserved ==> [0000097c00 - 0000100000]
>  #4 [0001a07000 - 0001a0719d]              BRK ==> [0001a07000 - 0001a0719d]
>  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>found SMP MP-table at [ffff8800000ff780] ff780
> [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00240000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x00000097
>    0: 0x00000100 -> 0x000bffb0
>    0: 0x00100000 -> 0x00240000
>On node 0 totalpages: 2096951
>  DMA zone: 56 pages used for memmap
>  DMA zone: 109 pages reserved
>  DMA zone: 3810 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767976 pages, LIFO batch:31
>  Normal zone: 17920 pages used for memmap
>  Normal zone: 1292800 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8300 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000097000 - 0000000000098000
>PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000
>PM: Registered nosave memory: 00000000bffbe000 - 00000000bffe0000
>PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at c0000000 (gap: c0000000:3ff00000)
>NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 26 pages at ffff880028034000, static data 77472 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2064586
>Kernel command line: root=/dev/md12 quiet fastboot ro
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 20000000 size 32 MB
>Aperture pointing to e820 RAM. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>PM: Registered nosave memory: 0000000020000000 - 0000000024000000
>Memory: 8183416k/9437184k available (6358k kernel code, 1049380k absent, 203484k reserved, 2035k data, 492k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:384
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2507.635 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5015.26 BogoMIPS (lpj=2507632)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using C1E aware idle routine
>Performance Counters: AMD PMU driver.
>... version:                 0
>... bit width:               48
>... generic counters:        4
>... value mask:              0000ffffffffffff
>... max period:              00007fffffffffff
>... fixed-purpose counters:  0
>... counter mask:            000000000000000f
>ACPI: Core revision 20090521
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5015.02 BogoMIPS (lpj=2507513)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x2 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5015.02 BogoMIPS (lpj=2507514)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>mce: CPU supports 6 MCE banks
>CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x3 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5015.02 BogoMIPS (lpj=2507514)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>mce: CPU supports 6 MCE banks
>CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (20060.34 BogoMIPS).
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10200.000 MB/sec
>xor: using function: generic_sse (10200.000 MB/sec)
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>TOM: 00000000c0000000 aka 3072M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff]
>node 0 link 0: mmio [f0000000, ffffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [c0000000, dfffffff]
>TOM2: 0000000240000000 aka 9216M
>bus: [00,07] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [e0100000, ffffffff]
>bus: 00 index 2 mmio: [a0000, bffff]
>bus: 00 index 3 mmio: [c0000000, dfffffff]
>bus: 00 index 4 mmio: [240000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>PCI: Using configuration type 1 for extended access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:12.0: reg 10 io port: [0x5000-0x5007]
>pci 0000:00:12.0: reg 14 io port: [0x4000-0x4003]
>pci 0000:00:12.0: reg 18 io port: [0x3000-0x3007]
>pci 0000:00:12.0: reg 1c io port: [0x2000-0x2003]
>pci 0000:00:12.0: reg 20 io port: [0x1000-0x100f]
>pci 0000:00:12.0: reg 24 32bit mmio: [0xfe2ff800-0xfe2ffbff]
>pci 0000:00:13.0: reg 10 32bit mmio: [0xfe2fe000-0xfe2fefff]
>pci 0000:00:13.1: reg 10 32bit mmio: [0xfe2fd000-0xfe2fdfff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xfe2fc000-0xfe2fcfff]
>pci 0000:00:13.3: reg 10 32bit mmio: [0xfe2fb000-0xfe2fbfff]
>pci 0000:00:13.4: reg 10 32bit mmio: [0xfe2fa000-0xfe2fafff]
>pci 0000:00:13.5: reg 10 32bit mmio: [0xfe2ff000-0xfe2ff0ff]
>pci 0000:00:13.5: supports D1 D2
>pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.5: PME# disabled
>pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
>pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
>pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:01:00.0: reg 18 64bit mmio: [0xfe3f0000-0xfe3fffff]
>pci 0000:01:00.0: reg 20 io port: [0x6000-0x60ff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0xfe3c0000-0xfe3dffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 64bit mmio: [0xfe3ec000-0xfe3effff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:02.0: bridge io port: [0x6000-0x6fff]
>pci 0000:00:02.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
>pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
>pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfe4f0000-0xfe4fffff]
>pci 0000:02:00.0: reg 20 io port: [0x7000-0x70ff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xfe4c0000-0xfe4dffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.1: reg 10 64bit mmio: [0xfe4ec000-0xfe4effff]
>pci 0000:02:00.1: supports D1 D2
>pci 0000:00:03.0: bridge io port: [0x7000-0x7fff]
>pci 0000:00:03.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
>pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:03:00.0: reg 10 io port: [0x9800-0x9807]
>pci 0000:03:00.0: reg 14 io port: [0x9400-0x9403]
>pci 0000:03:00.0: reg 18 io port: [0x9000-0x9007]
>pci 0000:03:00.0: reg 1c io port: [0x8800-0x8803]
>pci 0000:03:00.0: reg 20 io port: [0x8400-0x840f]
>pci 0000:03:00.0: reg 24 32bit mmio: [0xfe5ffc00-0xfe5fffff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:04.0: bridge io port: [0x8000-0x9fff]
>pci 0000:00:04.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
>pci 0000:04:00.0: reg 10 64bit mmio: [0xfe6fc000-0xfe6fffff]
>pci 0000:04:00.0: reg 18 io port: [0xa800-0xa8ff]
>pci 0000:04:00.0: reg 30 32bit mmio: [0xfe6c0000-0xfe6dffff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:06.0: bridge io port: [0xa000-0xafff]
>pci 0000:00:06.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
>pci 0000:05:00.0: reg 10 io port: [0xc800-0xc807]
>pci 0000:05:00.0: reg 14 io port: [0xc400-0xc403]
>pci 0000:05:00.0: reg 18 io port: [0xc000-0xc007]
>pci 0000:05:00.0: reg 1c io port: [0xb800-0xb803]
>pci 0000:05:00.0: reg 20 io port: [0xb400-0xb40f]
>pci 0000:05:00.0: reg 24 32bit mmio: [0xfe7ffc00-0xfe7fffff]
>pci 0000:05:00.0: supports D1
>pci 0000:05:00.0: PME# supported from D0 D1 D3hot
>pci 0000:05:00.0: PME# disabled
>pci 0000:00:07.0: bridge io port: [0xb000-0xcfff]
>pci 0000:00:07.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
>pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff]
>pci 0000:07:04.0: reg 10 io port: [0xd800-0xd8ff]
>pci 0000:07:04.0: supports D1 D2
>pci 0000:06:00.0: bridge io port: [0xd000-0xdfff]
>pci 0000:08:00.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
>pci 0000:08:00.0: reg 18 io port: [0xe800-0xe8ff]
>pci 0000:08:00.0: reg 1c 64bit mmio: [0xfe900000-0xfe9fffff]
>pci 0000:08:00.0: reg 30 32bit mmio: [0xfe880000-0xfe8fffff]
>pci 0000:00:0c.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:0c.0: bridge 32bit mmio: [0xfe800000-0xfeafffff]
>pci 0000:09:08.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
>pci 0000:09:08.0: supports D1 D2
>pci 0000:09:08.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:09:08.0: PME# disabled
>pci 0000:00:14.4: transparent bridge
>pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>raid6: int64x1   2156 MB/s
>raid6: int64x2   3074 MB/s
>raid6: int64x4   2312 MB/s
>raid6: int64x8   2160 MB/s
>raid6: sse2x1    3562 MB/s
>raid6: sse2x2    5722 MB/s
>raid6: sse2x4    7109 MB/s
>raid6: using algorithm sse2x4 (7109 MB/s)
>PCI: Using ACPI for IRQ routing
>pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
>pci 0000:00:00.0: BAR 3: can't allocate resource
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:0a: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:0a: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:0a: mem resource (0x100000-0xbfffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x40b-0x40b has been reserved
>system 00:07: ioport range 0x4d6-0x4d6 has been reserved
>system 00:07: ioport range 0xc00-0xc01 has been reserved
>system 00:07: ioport range 0xc14-0xc14 has been reserved
>system 00:07: ioport range 0xc50-0xc51 has been reserved
>system 00:07: ioport range 0xc52-0xc52 has been reserved
>system 00:07: ioport range 0xc6c-0xc6c has been reserved
>system 00:07: ioport range 0xc6f-0xc6f has been reserved
>system 00:07: ioport range 0xcd0-0xcd1 has been reserved
>system 00:07: ioport range 0xcd2-0xcd3 has been reserved
>system 00:07: ioport range 0xcd4-0xcd5 has been reserved
>system 00:07: ioport range 0xcd6-0xcd7 has been reserved
>system 00:07: ioport range 0xcd8-0xcdf has been reserved
>system 00:07: ioport range 0x800-0x89f has been reserved
>system 00:07: ioport range 0xb10-0xb1f has been reserved
>system 00:07: ioport range 0x900-0x90f has been reserved
>system 00:07: ioport range 0x910-0x91f has been reserved
>system 00:07: ioport range 0xfe00-0xfefe has been reserved
>system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:08: ioport range 0xe00-0xe0f has been reserved
>system 00:08: ioport range 0xe80-0xe8f has been reserved
>system 00:08: ioport range 0xf40-0xf4f has been reserved
>system 00:08: ioport range 0xa30-0xa3f has been reserved
>system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:02.0:   IO window: 0x6000-0x6fff
>pci 0000:00:02.0:   MEM window: 0xfe300000-0xfe3fffff
>pci 0000:00:02.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
>pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:03.0:   IO window: 0x7000-0x7fff
>pci 0000:00:03.0:   MEM window: 0xfe400000-0xfe4fffff
>pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:04.0:   IO window: 0x8000-0x9fff
>pci 0000:00:04.0:   MEM window: 0xfe500000-0xfe5fffff
>pci 0000:00:04.0:   PREFETCH window: disabled
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:06.0:   IO window: 0xa000-0xafff
>pci 0000:00:06.0:   MEM window: 0xfe600000-0xfe6fffff
>pci 0000:00:06.0:   PREFETCH window: disabled
>pci 0000:00:07.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:07.0:   IO window: 0xb000-0xcfff
>pci 0000:00:07.0:   MEM window: 0xfe700000-0xfe7fffff
>pci 0000:00:07.0:   PREFETCH window: disabled
>pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
>pci 0000:06:00.0:   IO window: 0xd000-0xdfff
>pci 0000:06:00.0:   MEM window: disabled
>pci 0000:06:00.0:   PREFETCH window: disabled
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:06
>pci 0000:00:0b.0:   IO window: 0xd000-0xdfff
>pci 0000:00:0b.0:   MEM window: disabled
>pci 0000:00:0b.0:   PREFETCH window: disabled
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:0c.0:   IO window: 0xe000-0xefff
>pci 0000:00:0c.0:   MEM window: 0xfe800000-0xfeafffff
>pci 0000:00:0c.0:   PREFETCH window: disabled
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:09
>pci 0000:00:14.4:   IO window: disabled
>pci 0000:00:14.4:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:14.4:   PREFETCH window: disabled
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:07.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci 0000:06:00.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0x6000-0x6fff]
>pci_bus 0000:01: resource 1 mem: [0xfe300000-0xfe3fffff]
>pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
>pci_bus 0000:02: resource 0 io:  [0x7000-0x7fff]
>pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff]
>pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
>pci_bus 0000:03: resource 0 io:  [0x8000-0x9fff]
>pci_bus 0000:03: resource 1 mem: [0xfe500000-0xfe5fffff]
>pci_bus 0000:04: resource 0 io:  [0xa000-0xafff]
>pci_bus 0000:04: resource 1 mem: [0xfe600000-0xfe6fffff]
>pci_bus 0000:05: resource 0 io:  [0xb000-0xcfff]
>pci_bus 0000:05: resource 1 mem: [0xfe700000-0xfe7fffff]
>pci_bus 0000:06: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:07: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:08: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:08: resource 1 mem: [0xfe800000-0xfeafffff]
>pci_bus 0000:09: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>fuse init (API version 7.12)
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>Btrfs loaded
>msgmni has been set to 15985
>alg: No test for stdrng (krng)
>async_tx: api initialized (sync-only)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:02.0: setting latency timer to 64
>pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:03.0: setting latency timer to 64
>pcieport-driver 0000:00:04.0: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:04.0: setting latency timer to 64
>pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:06.0: setting latency timer to 64
>pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:07.0: setting latency timer to 64
>pcieport-driver 0000:00:0b.0: irq 29 for MSI/MSI-X
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>pcieport-driver 0000:00:0c.0: irq 30 for MSI/MSI-X
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>ACPI: duty_cycle spans bit 4
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>processor LNXCPU:02: registered as cooling_device2
>processor LNXCPU:03: registered as cooling_device3
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
>pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07
>Probing IDE interface ide0...
>ide0: no devices on the port
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>ide-cd driver 5.00
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq sntf ilck led clo pmp pio 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400000 iPHY RDY changed
>ata2: SATA max UDMA/133 abar m1024@0xfe2ff800 port 0xfe2ff980 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe2ff800 port 0xfe2ffa00 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe2ff800 port 0xfe2ffa80 irq 22
>ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
>ahci 0000:03:00.0: controller can't do PMP, turning off CAP_PMP
>ahci 0000:03:00.0: MV_AHCI HACK: port_map 7 -> 3
>ahci 0000:03:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl RAID mode
>ahci 0000:03:00.0: flags: 64bit stag led slum part 
>ahci 0000:03:00.0: setting latency timer to 64
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 16
>ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 16
>ata7: DUMMY
>ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:05:00.0: controller can't do NCQ, turning off CAP_NCQ
>ahci 0000:05:00.0: controller can't do PMP, turning off CAP_PMP
>ahci 0000:05:00.0: MV_AHCI HACK: port_map 7 -> 3
>ahci 0000:05:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:05:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl RAID mode
>ahci 0000:05:00.0: flags: 64bit stag led slum part 
>ahci 0000:05:00.0: setting latency timer to 64
>scsi7 : ahci
>scsi8 : ahci
>scsi9 : ahci
>ata8: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 19
>ata9: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 19
>ata10: DUMMY
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>firewire_ohci 0000:09:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:09:08.0, OHCI version 1.0
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe2ff000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe2fe000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe2fd000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe2fc000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe2fb000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe2fa000
>ata8: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
>ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>it87: Found IT8716F chip at 0xe80, revision 3
>it87: in3 is VCC (+5V)
>ACPI: I/O resource it87 [0xe85-0xe86] conflicts with ACPI region HWRE [0xe85-0xe86]
>ACPI: Device needs an ACPI driver
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.20.
>AV200 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>ata4: softreset failed (device not ready)
>ata2: softreset failed (device not ready)
>ata2: applying SB600 PMP SRST workaround and retrying
>ata3: softreset failed (device not ready)
>ata3: applying SB600 PMP SRST workaround and retrying
>ata4: applying SB600 PMP SRST workaround and retrying
>usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
>usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-3: Product: USB2.0 Hub
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 4 ports detected
>firewire_core: created device fw0: GUID 001e8c0001058edd, S400
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata4.00: configured for UDMA/133
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: configured for UDMA/133
>ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata2.00: configured for UDMA/133
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>usb 4-1: New USB device found, idVendor=09da, idProduct=000e
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: PS/2+USB Mouse
>usb 4-1: Manufacturer: A4Tech
>usb 4-1: configuration #1 chosen from 1 choice
>input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input2
>generic-usb 0003:09DA:000E.0001: input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:13.2-1/input0
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
> sda:
>sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
> sdc:
>sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd:
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde:
>sd 4:0:0:0: Attached scsi generic sg4 type 0
> sda1 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
> sdd1 sdd2 sdd3 sdd4
>sd 3:0:0:0: [sdd] Attached SCSI disk
> sdc1 sdc2 sdc3 sdc4
>sd 2:0:0:0: [sdc] Attached SCSI disk
> sdb1 sdb3 sdb4
>sd 1:0:0:0: [sdb] Attached SCSI disk
> sde1 sde2 sde3
>sd 4:0:0:0: [sde] Attached SCSI disk
>usb 4-2: new low speed USB device using ohci_hcd and address 3
>ALSA device list:
>  #0: Asus Virtuoso 100 (rev 2) at 0xd800, irq 19
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (2500 MHz)
>powernow-k8:    1 : pstate 1 (1250 MHz)
>registered taskstats version 1
>usb 4-2: New USB device found, idVendor=046a, idProduct=0801
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: Wired Keyboard
>usb 4-2: Manufacturer: NOVATEK
>usb 4-2: configuration #1 chosen from 1 choice
>input: NOVATEK Wired Keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input3
>generic-usb 0003:046A:0801.0002: input: USB HID v1.10 Keyboard [NOVATEK Wired Keyboard] on usb-0000:00:13.2-2/input0
>input: NOVATEK Wired Keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.1/input/input4
>generic-usb 0003:046A:0801.0003: input: USB HID v1.10 Device [NOVATEK Wired Keyboard] on usb-0000:00:13.2-2/input1
>ata6: SATA link down (SStatus 0 SControl 300)
>usb 1-3.1: new high speed USB device using ehci_hcd and address 5
>usb 1-3.1: New USB device found, idVendor=05e3, idProduct=0608
>usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-3.1: Product: USB2.0 Hub
>usb 1-3.1: configuration #1 chosen from 1 choice
>hub 1-3.1:1.0: USB hub found
>hub 1-3.1:1.0: 4 ports detected
>ata9: SATA link down (SStatus 0 SControl 300)
>md: Waiting for all devices to be available before autodetect
>md: If you don't use raid, use raid=noautodetect
>md: Autodetecting RAID arrays.
>md: Scanned 12 and added 12 devices.
>md: autorun ...
>md: considering sdb4 ...
>md:  adding sdb4 ...
>md: sdb3 has different UUID to sdb4
>md: sdb1 has different UUID to sdb4
>md:  adding sdc4 ...
>md: sdc3 has different UUID to sdb4
>md: sdc1 has different UUID to sdb4
>md:  adding sdd4 ...
>md: sdd3 has different UUID to sdb4
>md: sdd1 has different UUID to sdb4
>md:  adding sda4 ...
>md: sda3 has different UUID to sdb4
>md: sda1 has different UUID to sdb4
>md: created md13
>md: bind<sda4>
>md: bind<sdd4>
>md: bind<sdc4>
>md: bind<sdb4>
>md: running: <sdb4><sdc4><sdd4><sda4>
>raid5: device sdb4 operational as raid disk 2
>raid5: device sdc4 operational as raid disk 0
>raid5: device sdd4 operational as raid disk 1
>raid5: device sda4 operational as raid disk 3
>raid5: allocated 4270kB for md13
>raid5: raid level 5 set md13 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sdc4
> disk 1, o:1, dev:sdd4
> disk 2, o:1, dev:sdb4
> disk 3, o:1, dev:sda4
>md13: detected capacity change from 0 to 2968379719680
>md: considering sdb3 ...
>md:  adding sdb3 ...
>md: sdb1 has different UUID to sdb3
>md:  adding sdc3 ...
>md: sdc1 has different UUID to sdb3
>md:  adding sdd3 ...
>md: sdd1 has different UUID to sdb3
>md:  adding sda3 ...
>md: sda1 has different UUID to sdb3
>md: created md12
>md: bind<sda3>
>md: bind<sdd3>
>md: bind<sdc3>
>md: bind<sdb3>
>md: running: <sdb3><sdc3><sdd3><sda3>
>raid5: device sdb3 operational as raid disk 2
>raid5: device sdc3 operational as raid disk 0
>raid5: device sdd3 operational as raid disk 1
>raid5: device sda3 operational as raid disk 3
>raid5: allocated 4270kB for md12
>raid5: raid level 5 set md12 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sdc3
> disk 1, o:1, dev:sdd3
> disk 2, o:1, dev:sdb3
> disk 3, o:1, dev:sda3
>md12: detected capacity change from 0 to 25761349632
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md: sdc1 has different UUID to sdb1
>md: sdd1 has different UUID to sdb1
>md:  adding sda1 ...
>md: created md11
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>raid0: looking at sdb1
>raid0:   comparing sdb1(4208768)
> with sdb1(4208768)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda1
>raid0:   comparing sda1(4208768)
> with sdb1(4208768)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 8417536 sectors.
>******* md11 configuration *********
>zone0=[sdb1/sda1/]
>        zone offset=0kb device offset=0kb size=4208768kb
>**********************************
>
>md11: detected capacity change from 0 to 4309778432
>md: considering sdc1 ...
>md:  adding sdc1 ...
>md:  adding sdd1 ...
>md: created md10
>md: bind<sdd1>
>md: bind<sdc1>
>md: running: <sdc1><sdd1>
>raid1: raid set md10 active with 2 out of 2 mirrors
>md10: detected capacity change from 0 to 1077411840
>md: ... autorun DONE.
> md12: unknown partition table
>EXT3-fs: md12: couldn't mount because of unsupported optional features (240).
>EXT2-fs: md12: couldn't mount because of unsupported optional features (240).
>EXT4-fs (md12): barriers enabled
>kjournald2 starting: pid 937, dev md12:8, commit interval 5 seconds
>EXT4-fs (md12): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (md12): mounted filesystem with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 9:12.
>Freeing unused kernel memory: 492k freed
>udev: starting version 145
>sata_mv 0000:08:00.0: version 1.28
>sata_mv 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>sata_mv 0000:08:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
>sata_mv 0000:08:00.0: setting latency timer to 64
>scsi10 : sata_mv
>scsi11 : sata_mv
>scsi12 : sata_mv
>scsi13 : sata_mv
>ata11: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea22000 irq 16
>ata12: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea24000 irq 16
>ata13: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea26000 irq 16
>ata14: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea28000 irq 16
>sky2 driver version 1.23
>sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>sky2 0000:04:00.0: setting latency timer to 64
>sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
>sky2 0000:04:00.0: irq 31 for MSI/MSI-X
>sky2 eth0: addr 00:1e:8c:c0:f2:1d
> md10:
> md11:
> md13: unknown partition table
> unknown partition table
> unknown partition table
>ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata11.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
>ata11.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata11.00: configured for UDMA/133
>scsi 10:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 10:0:0:0: Attached scsi generic sg5 type 0
>sd 10:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 10:0:0:0: [sdf] Write Protect is off
>sd 10:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: unknown partition table
>sd 10:0:0:0: [sdf] Attached SCSI disk
>ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata12.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
>ata12.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata12.00: configured for UDMA/133
>scsi 11:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 11:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 11:0:0:0: Attached scsi generic sg6 type 0
>sd 11:0:0:0: [sdg] Write Protect is off
>sd 11:0:0:0: [sdg] Mode Sense: 00 3a 00 00
>sd 11:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdg: unknown partition table
>sd 11:0:0:0: [sdg] Attached SCSI disk
>ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata13.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
>ata13.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata13.00: configured for UDMA/133
>scsi 12:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 12:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 12:0:0:0: Attached scsi generic sg7 type 0
>sd 12:0:0:0: [sdh] Write Protect is off
>sd 12:0:0:0: [sdh] Mode Sense: 00 3a 00 00
>sd 12:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdh: unknown partition table
>sd 12:0:0:0: [sdh] Attached SCSI disk
>ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata14.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
>ata14.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata14.00: configured for UDMA/133
>scsi 13:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 13:0:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 13:0:0:0: Attached scsi generic sg8 type 0
>sd 13:0:0:0: [sdi] Write Protect is off
>sd 13:0:0:0: [sdi] Mode Sense: 00 3a 00 00
>sd 13:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdi: unknown partition table
>sd 13:0:0:0: [sdi] Attached SCSI disk
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>[drm:drm_init], 
>[drm:drm_get_dev], 
>radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:00.0: setting latency timer to 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 0
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFE3F0000
>[drm] register mmio size: 65536
>[drm:radeon_get_bios], ATOMBIOS detected
>ATOM BIOS: RV770PRO
>[drm] Clocks initialized !
>[TTM] Zone  kernel: Available graphics memory: 4092406 kiB.
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[drm] radeon: 512M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm:r600_cp_init_microcode], 
>[drm] Loading RV770 CP Microcode
>platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] ring test succeeded in 1 usecs
>[drm:r600_blit_init], r6xx blit allocated bo @ 0x          140000 00000a00 vs 00000800 ps 00000900
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] radeon: kernel modesetting successfully initialized.
>[drm:drm_sysfs_connector_add], adding "DVI-I-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "DVI-I-2" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
>[drm:drm_helper_probe_single_connector_modes], DVI-I-1
>[drm:radeon_atom_dac_detect], Bios 0 scratch 20000 00000010
>[drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected
>[drm:radeon_atombios_connected_scratch_regs], CRT2 disconnected
>[drm:drm_helper_probe_single_connector_modes], DVI-I-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes], DVI-I-2
>[drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
>[drm:radeon_atombios_connected_scratch_regs], DFP2 connected
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1920x540" 0 74250 1920 2008 2052 2200 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-I-2
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 13:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 14:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 18:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 6 enabled? no
>[drm:drm_enable_connectors], connector 9 enabled? yes
>[drm:drm_target_preferred], looking for preferred mode on connector 9
>[drm:drm_target_preferred], found mode 1920x1200
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
>[drm] fb mappable at 0xC0141000
>[drm] vram apper at 0xC0000000
>[drm] size 9216000
>[drm] fb depth is 24
>[drm]    pitch is 7680
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>[drm:drm_get_dev], 
>radeon 0000:02:00.0: enabling device (0000 -> 0003)
>radeon 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>radeon 0000:02:00.0: setting latency timer to 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 65
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 1
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFE4F0000
>[drm] register mmio size: 65536
>[drm:radeon_get_bios], ATOMBIOS detected
>ATOM BIOS: RV770PRO
>[drm] GPU not posted. posting now...
>[drm] Clocks initialized !
>[drm] radeon: 512M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm:r600_cp_init_microcode], 
>[drm] Loading RV770 CP Microcode
>platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] ring test succeeded in 1 usecs
>[drm:r600_blit_init], r6xx blit allocated bo @ 0x          140000 00000a00 vs 00000800 ps 00000900
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] radeon: kernel modesetting successfully initialized.
>[drm:drm_sysfs_connector_add], adding "DVI-I-3" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "DVI-I-4" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
>[drm:drm_helper_probe_single_connector_modes], DVI-I-3
>[drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000010
>[drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected
>[drm:radeon_atombios_connected_scratch_regs], CRT2 disconnected
>[drm:drm_helper_probe_single_connector_modes], DVI-I-3 is disconnected
>[drm:drm_helper_probe_single_connector_modes], DVI-I-4
>[drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000001
>[drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
>[drm:radeon_atombios_connected_scratch_regs], DFP2 disconnected
>[drm:drm_helper_probe_single_connector_modes], DVI-I-4 is disconnected
>------------[ cut here ]------------
>WARNING: at drivers/gpu/drm/drm_crtc_helper.c:950 drm_helper_initial_config+0x7a/0x80 [drm_kms_helper]()
>Hardware name: System Product Name
>Connected connector with 0 modes
>Modules linked in: radeon(+) ttm drm_kms_helper drm fb sky2 i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect sata_mv
>Pid: 1086, comm: modprobe Not tainted 2.6.31-rc9-27054-g6cf8a3f #6
>Call Trace:
> [<ffffffffa007a33a>] ? drm_helper_initial_config+0x7a/0x80 [drm_kms_helper]
> [<ffffffff8104f760>] warn_slowpath_common+0x80/0xe0
> [<ffffffff8104f876>] warn_slowpath_fmt+0x76/0xa0
> [<ffffffffa0079c61>] ? drm_helper_probe_single_connector_modes+0x1c1/0x300 [drm_kms_helper]
> [<ffffffffa0079dee>] ? drm_helper_probe_connector_modes+0x4e/0xa0 [drm_kms_helper]
> [<ffffffffa007a33a>] drm_helper_initial_config+0x7a/0x80 [drm_kms_helper]
> [<ffffffffa00c3ad9>] radeon_modeset_init+0x2a9/0x560 [radeon]
> [<ffffffffa00aa630>] ? radeon_device_init+0x450/0x630 [radeon]
> [<ffffffffa00ab7d0>] radeon_driver_load_kms+0xa0/0x130 [radeon]
> [<ffffffffa004d7ac>] drm_get_dev+0x30c/0x4b0 [drm]
> [<ffffffff81334d49>] ? kobject_get+0x29/0x50
> [<ffffffffa00f0413>] radeon_pci_probe+0x23/0x29c [radeon]
> [<ffffffff81354e65>] local_pci_probe+0x25/0x40
> [<ffffffff81356270>] pci_device_probe+0xa0/0xd0
> [<ffffffff813db942>] driver_probe_device+0xb2/0x1d0
> [<ffffffff813dbb13>] __driver_attach+0xb3/0xc0
> [<ffffffff813dba60>] ? __driver_attach+0x0/0xc0
> [<ffffffff813daedb>] bus_for_each_dev+0x6b/0xb0
> [<ffffffff813db71f>] driver_attach+0x2f/0x50
> [<ffffffff813da6a0>] bus_add_driver+0x210/0x280
> [<ffffffff813dbf3c>] driver_register+0x8c/0x170
> [<ffffffff81356719>] __pci_register_driver+0x69/0xf0
> [<ffffffffa0124000>] ? radeon_init+0x0/0xf3 [radeon]
> [<ffffffffa004826f>] drm_init+0x10f/0x120 [drm]
> [<ffffffffa0124000>] ? radeon_init+0x0/0xf3 [radeon]
> [<ffffffffa0124059>] radeon_init+0x59/0xf3 [radeon]
> [<ffffffff81009076>] do_one_initcall+0x46/0x1c0
> [<ffffffff810862b2>] sys_init_module+0x102/0x270
> [<ffffffff8100c26b>] system_call_fastpath+0x16/0x1b
>---[ end trace a002ba32fc02e29b ]---
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 6 enabled? no
>[drm:drm_enable_connectors], connector 9 enabled? no
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 1
>md: md1 stopped.
>md: bind<sdh>
>md: bind<sdf>
>md: bind<sdg>
>md: bind<sdi>
>raid5: device sdi operational as raid disk 0
>raid5: device sdg operational as raid disk 3
>raid5: device sdf operational as raid disk 2
>raid5: device sdh operational as raid disk 1
>raid5: allocated 4270kB for md1
>raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sdi
> disk 1, o:1, dev:sdh
> disk 2, o:1, dev:sdf
> disk 3, o:1, dev:sdg
>md1: detected capacity change from 0 to 1500321939456
> md1: unknown partition table
>EXT4-fs (md12): warning: maximal mount count reached, running e2fsck is recommended
>EXT4-fs (md12): internal journal on md12:8
>EXT4-fs (md11): barriers enabled
>EXT4-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
>kjournald2 starting: pid 1486, dev md11:8, commit interval 5 seconds
>EXT4-fs (md11): internal journal on md11:8
>EXT4-fs (md11): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (md11): mounted filesystem with ordered data mode
>Filesystem "md13": Disabling barriers, trial barrier write failed
>XFS mounting filesystem md13
>Ending clean XFS mount for filesystem: md13
>Filesystem "md1": Disabling barriers, trial barrier write failed
>XFS mounting filesystem md1
>Ending clean XFS mount for filesystem: md1
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>JBD: barrier-based sync failed on md12:8 - disabling barriers
>sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88023c75c000 3 fb: ffff88023e3bf840 connectors: ffff88023f9a6c80 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_config], setting connector 9 crtc to ffff88023c75c000
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000080, active_devices 00000000
>[drm:radeon_encoder_set_active_device], setting active device to 00000080 from 00000080 00000081 for encoder 2
>[drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
>[drm:radeon_atom_encoder_dpms], encoder dpms 22 to mode 3, devices 00000010, active_devices 00000000
>[drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
>[drm:radeon_compute_pll], PLL freq 154000 2 1023
>executing set pll
>executing set crtc timing
>[drm] TMDS-10: set mode 1920x1200 24
>[drm:avivo_crtc_load_lut], 0
>[drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000080, active_devices 00000080
>[drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
>[drm:radeon_atom_encoder_dpms], encoder dpms 22 to mode 3, devices 00000010, active_devices 00000000
>[drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
>Console: switching to colour frame buffer device 240x75
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88023c75c000 3 fb: ffff88023e3bf840 connectors: ffff88023f9a6c80 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 9 crtc to ffff88023c75c000

Actions: View

Attachments on bug 23860: 29409 | 29410 | 29411

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.