Attachment 29657 Details for Bug 24014 – kern.log, the full bootup

kern.log, the full bootup

kern.log (text/plain), 52.49 KB, created by Peter Hjalmarsson on 2009-09-18 02:49:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Hjalmarsson

Created: 2009-09-18 02:49:05 UTC

Size: 52.49 KB

patch

obsolete

>Sep 18 09:07:33 lillen kernel: pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1d.7: PME# disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: reg 10 io port: [0x8c00-0x8c07]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: reg 14 io port: [0x8880-0x8883]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: reg 18 io port: [0x8800-0x8807]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: reg 1c io port: [0x8480-0x8483]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: reg 20 io port: [0x8400-0x841f]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7ffc000-0xf7ffc7ff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: PME# supported from D3hot
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.2: PME# disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>Sep 18 09:07:33 lillen kernel: pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:02:00.0: reg 24 io port: [0xac00-0xac7f]
>Sep 18 09:07:33 lillen kernel: pci 0000:02:00.0: reg 30 32bit mmio: [0xfba80000-0xfbafffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0: bridge io port: [0xa000-0xafff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfbafffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:06:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:06:00.0: reg 18 io port: [0xd800-0xd8ff]
>Sep 18 09:07:33 lillen kernel: pci 0000:06:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:06:00.0: supports D1 D2
>Sep 18 09:07:33 lillen kernel: pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>Sep 18 09:07:33 lillen kernel: pci 0000:06:00.0: PME# disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.0: reg 30 32bit mmio: [0xfbce0000-0xfbceffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.0: PME# supported from D3hot
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.0: PME# disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.1: reg 10 io port: [0xcc00-0xcc07]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.1: reg 14 io port: [0xc880-0xc883]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.1: reg 18 io port: [0xc800-0xc807]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.1: reg 1c io port: [0xc480-0xc483]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.1: reg 20 io port: [0xc400-0xc40f]
>Sep 18 09:07:33 lillen kernel: pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:04:00.0: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:04:00.0: reg 18 io port: [0xb800-0xb8ff]
>Sep 18 09:07:33 lillen kernel: pci 0000:04:00.0: reg 30 32bit mmio: [0xfbbc0000-0xfbbdffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:04:00.0: supports D1 D2
>Sep 18 09:07:33 lillen kernel: pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>Sep 18 09:07:33 lillen kernel: pci 0000:04:00.0: PME# disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
>Sep 18 09:07:33 lillen kernel: pci 0000:08:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff]
>Sep 18 09:07:33 lillen kernel: pci 0000:08:02.0: reg 14 io port: [0xec00-0xec7f]
>Sep 18 09:07:33 lillen kernel: pci 0000:08:02.0: supports D2
>Sep 18 09:07:33 lillen kernel: pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
>Sep 18 09:07:33 lillen kernel: pci 0000:08:02.0: PME# disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0: transparent bridge
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
>Sep 18 09:07:33 lillen kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
>Sep 18 09:07:33 lillen kernel: SCSI subsystem initialized
>Sep 18 09:07:33 lillen kernel: libata version 3.00 loaded.
>Sep 18 09:07:33 lillen kernel: usbcore: registered new interface driver usbfs
>Sep 18 09:07:33 lillen kernel: usbcore: registered new interface driver hub
>Sep 18 09:07:33 lillen kernel: usbcore: registered new device driver usb
>Sep 18 09:07:33 lillen kernel: ACPI: WMI: Mapper loaded
>Sep 18 09:07:33 lillen kernel: PCI: Using ACPI for IRQ routing
>Sep 18 09:07:33 lillen kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>Sep 18 09:07:33 lillen kernel: hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 0
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 3
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 1
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 2
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 4
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 5
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 7
>Sep 18 09:07:33 lillen kernel: Switched to high resolution mode on CPU 6
>Sep 18 09:07:33 lillen kernel: pnp: PnP ACPI init
>Sep 18 09:07:33 lillen kernel: ACPI: bus type pnp registered
>Sep 18 09:07:33 lillen kernel: pnp: PnP ACPI: found 15 devices
>Sep 18 09:07:33 lillen kernel: ACPI: ACPI bus type pnp unregistered
>Sep 18 09:07:33 lillen kernel: system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
>Sep 18 09:07:33 lillen kernel: system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:06: ioport range 0x290-0x29f has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:07: ioport range 0x800-0x87f has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:07: ioport range 0x500-0x57f could not be reserved
>Sep 18 09:07:33 lillen kernel: system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>Sep 18 09:07:33 lillen kernel: system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>Sep 18 09:07:33 lillen kernel: system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>Sep 18 09:07:33 lillen kernel: system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>Sep 18 09:07:33 lillen kernel: system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
>Sep 18 09:07:33 lillen kernel: system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
>Sep 18 09:07:33 lillen kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>Sep 18 09:07:33 lillen kernel: pci 0000:00:01.0:   IO window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:01.0:   MEM window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:01.0:   PREFETCH window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0:   IO window: 0xa000-0xafff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0:   MEM window: 0xf8000000-0xfbafffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
>Sep 18 09:07:33 lillen kernel: pci 0000:00:07.0:   IO window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:07.0:   MEM window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:07.0:   PREFETCH window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0:   IO window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0:   MEM window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0:   PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2:   MEM window: 0xfbd00000-0xfbdfffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2:   PREFETCH window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4:   MEM window: 0xfbc00000-0xfbcfffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4:   PREFETCH window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5:   IO window: 0xb000-0xbfff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5:   MEM window: 0xfbb00000-0xfbbfffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5:   PREFETCH window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0:   IO window: 0xe000-0xefff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0:   MEM window: 0xfbe00000-0xfbefffff
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0:   PREFETCH window: disabled
>Sep 18 09:07:33 lillen kernel: pci 0000:00:01.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:03.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:07.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.2: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.4: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1c.5: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci 0000:00:1e.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbafffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:07: resource 2 pref mem [0xf6f00000-0xf6ffffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:06: resource 0 io:  [0xd000-0xdfff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:06: resource 1 mem: [0xfbd00000-0xfbdfffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:04: resource 0 io:  [0xb000-0xbfff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:08: resource 0 io:  [0xe000-0xefff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:08: resource 1 mem: [0xfbe00000-0xfbefffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
>Sep 18 09:07:33 lillen kernel: pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
>Sep 18 09:07:33 lillen kernel: NET: Registered protocol family 2
>Sep 18 09:07:33 lillen kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Sep 18 09:07:33 lillen kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>Sep 18 09:07:33 lillen kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>Sep 18 09:07:33 lillen kernel: TCP: Hash tables configured (established 524288 bind 65536)
>Sep 18 09:07:33 lillen kernel: TCP reno registered
>Sep 18 09:07:33 lillen kernel: NET: Registered protocol family 1
>Sep 18 09:07:33 lillen kernel: Trying to unpack rootfs image as initramfs...
>Sep 18 09:07:33 lillen kernel: Freeing initrd memory: 5204k freed
>Sep 18 09:07:33 lillen kernel: microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
>Sep 18 09:07:33 lillen kernel: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Sep 18 09:07:33 lillen kernel: audit: initializing netlink socket (disabled)
>Sep 18 09:07:33 lillen kernel: type=2000 audit(1253264830.907:1): initialized
>Sep 18 09:07:33 lillen kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
>Sep 18 09:07:33 lillen kernel: msgmni has been set to 11953
>Sep 18 09:07:33 lillen kernel: alg: No test for stdrng (krng)
>Sep 18 09:07:33 lillen kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>Sep 18 09:07:33 lillen kernel: io scheduler noop registered
>Sep 18 09:07:33 lillen kernel: io scheduler cfq registered (default)
>Sep 18 09:07:33 lillen kernel: pci 0000:02:00.0: Boot video device
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:01.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:03.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:07.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.2: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.4: irq 53 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.4: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.5: irq 54 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: pcieport-driver 0000:00:1c.5: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
>Sep 18 09:07:33 lillen kernel: aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
>Sep 18 09:07:33 lillen kernel: aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
>Sep 18 09:07:33 lillen kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Sep 18 09:07:33 lillen kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>Sep 18 09:07:33 lillen kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Sep 18 09:07:33 lillen kernel: Linux agpgart interface v0.103
>Sep 18 09:07:33 lillen kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>Sep 18 09:07:33 lillen kernel: ACPI: Power Button [PWRF]
>Sep 18 09:07:33 lillen kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>Sep 18 09:07:33 lillen kernel: ACPI: Power Button [PWRB]
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf7980c0 00403 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a140 003B2 (v01  PmRef  P001Cst 00003001 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: Monitor-Mwait will be used to enter C-1 state
>Sep 18 09:07:33 lillen kernel: Monitor-Mwait will be used to enter C-2 state
>Sep 18 09:07:33 lillen kernel: Monitor-Mwait will be used to enter C-3 state
>Sep 18 09:07:33 lillen kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:00: registered as cooling_device0
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf7984d0 00403 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a500 00085 (v01  PmRef  P002Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:01: registered as cooling_device1
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf7988e0 00403 (v01 DpgPmm  P003Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a590 00085 (v01  PmRef  P003Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:02: registered as cooling_device2
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf798cf0 00403 (v01 DpgPmm  P004Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a620 00085 (v01  PmRef  P004Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:03: registered as cooling_device3
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf799100 00403 (v01 DpgPmm  P005Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a6b0 00085 (v01  PmRef  P005Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:04: registered as cooling_device4
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf799510 00403 (v01 DpgPmm  P006Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a740 00085 (v01  PmRef  P006Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:05: registered as cooling_device5
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf799920 00403 (v01 DpgPmm  P007Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a7d0 00085 (v01  PmRef  P007Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:06: registered as cooling_device6
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf799d30 00403 (v01 DpgPmm  P008Ist 00000012 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: SSDT 00000000bf79a860 00085 (v01  PmRef  P008Cst 00003000 INTL 20060113)
>Sep 18 09:07:33 lillen kernel: ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
>Sep 18 09:07:33 lillen kernel: processor LNXCPU:07: registered as cooling_device7
>Sep 18 09:07:33 lillen kernel: [drm] Initialized drm 1.1.0 20060810
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected an NV50 generation card (0x0a0180b1)
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: ... appears to be valid
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: BIT BIOS found
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Bios version 62.00.45.00
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Raw DCB entry 0: 04000320 00000028
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Raw DCB entry 1: 01000322 00020030
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Raw DCB entry 2: 02011310 00000028
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c1c023
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD293
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xEB80: Init table command not found: 0x87
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xEBA3: Init table command not found: 0x87
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xEB5D: Init table command not found: 0x87
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xEBC6: Init table command not found: 0x87
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD6BE
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xEB22
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEBFF
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xECD1
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xED36
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xED36: Condition still not met after 0ms, skiping following opcodes
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xC21A: parsing output script 0
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xC21A: parsing output script 0
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0xA806: parsing output script 0
>Sep 18 09:07:33 lillen kernel: [TTM] Zone  kernel: Available graphics memory: 3060152 kiB.
>Sep 18 09:07:33 lillen kernel: [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>Sep 18 09:07:33 lillen kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Allocating FIFO number 1
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected a DAC output
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected a TMDS output
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected a DAC output
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected a TMDS output
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: DCB encoder 1 unknown
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected a DVI-I connector
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Detected a DVI-I connector
>Sep 18 09:07:33 lillen kernel: allocated 1680x1050 fb: 0x40250000, bo ffff8801bf3cd200
>Sep 18 09:07:33 lillen kernel: [drm] DAC-7: set mode 1680x1050 22
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: 0x1255: parsing clock script 0
>Sep 18 09:07:33 lillen kernel: Console: switching to colour frame buffer device 210x65
>Sep 18 09:07:33 lillen kernel: fb0: nouveaufb frame buffer device
>Sep 18 09:07:33 lillen kernel: registered panic notifier
>Sep 18 09:07:33 lillen kernel: [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
>Sep 18 09:07:33 lillen kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>Sep 18 09:07:33 lillen kernel: brd: module loaded
>Sep 18 09:07:33 lillen kernel: loop: module loaded
>Sep 18 09:07:33 lillen kernel: ahci 0000:00:1f.2: version 3.0
>Sep 18 09:07:33 lillen kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>Sep 18 09:07:33 lillen kernel: ahci 0000:00:1f.2: irq 55 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: ahci: SSS flag set, parallel bus scan disabled
>Sep 18 09:07:33 lillen kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>Sep 18 09:07:33 lillen kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
>Sep 18 09:07:33 lillen kernel: ahci 0000:00:1f.2: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: scsi0 : ahci
>Sep 18 09:07:33 lillen kernel: scsi1 : ahci
>Sep 18 09:07:33 lillen kernel: scsi2 : ahci
>Sep 18 09:07:33 lillen kernel: scsi3 : ahci
>Sep 18 09:07:33 lillen kernel: scsi4 : ahci
>Sep 18 09:07:33 lillen kernel: scsi5 : ahci
>Sep 18 09:07:33 lillen kernel: ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 55
>Sep 18 09:07:33 lillen kernel: ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 55
>Sep 18 09:07:33 lillen kernel: ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 55
>Sep 18 09:07:33 lillen kernel: ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 55
>Sep 18 09:07:33 lillen kernel: ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 55
>Sep 18 09:07:33 lillen kernel: ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 55
>Sep 18 09:07:33 lillen kernel: ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 18 09:07:33 lillen kernel: ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>Sep 18 09:07:33 lillen kernel: ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>Sep 18 09:07:33 lillen kernel: ahci 0000:05:00.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: scsi6 : ahci
>Sep 18 09:07:33 lillen kernel: scsi7 : ahci
>Sep 18 09:07:33 lillen kernel: ata7: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
>Sep 18 09:07:33 lillen kernel: ata8: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
>Sep 18 09:07:33 lillen kernel: pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Sep 18 09:07:33 lillen kernel: pata_jmicron 0000:05:00.1: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: scsi8 : pata_jmicron
>Sep 18 09:07:33 lillen kernel: scsi9 : pata_jmicron
>Sep 18 09:07:33 lillen kernel: ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
>Sep 18 09:07:33 lillen kernel: ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
>Sep 18 09:07:33 lillen kernel: sky2 driver version 1.23
>Sep 18 09:07:33 lillen kernel: sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>Sep 18 09:07:33 lillen kernel: sky2 0000:06:00.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
>Sep 18 09:07:33 lillen kernel: sky2 0000:06:00.0: irq 56 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: sky2 eth0: addr 00:24:8c:f8:1f:5e
>Sep 18 09:07:33 lillen kernel: sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 18 09:07:33 lillen kernel: sky2 0000:04:00.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
>Sep 18 09:07:33 lillen kernel: sky2 0000:04:00.0: irq 57 for MSI/MSI-X
>Sep 18 09:07:33 lillen kernel: sky2 eth1: addr 00:24:8c:f8:25:68
>Sep 18 09:07:33 lillen kernel: tun: Universal TUN/TAP device driver, 1.6
>Sep 18 09:07:33 lillen kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Sep 18 09:07:33 lillen kernel: firewire_ohci 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>Sep 18 09:07:33 lillen kernel: firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI version 1.10
>Sep 18 09:07:33 lillen kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: debug port 1
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>Sep 18 09:07:33 lillen kernel: usb usb1: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 1-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 1-0:1.0: 6 ports detected
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: debug port 1
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
>Sep 18 09:07:33 lillen kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>Sep 18 09:07:33 lillen kernel: usb usb2: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 2-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 2-0:1.0: 6 ports detected
>Sep 18 09:07:33 lillen kernel: uhci_hcd: USB Universal Host Controller Interface driver
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
>Sep 18 09:07:33 lillen kernel: usb usb3: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 3-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 3-0:1.0: 2 ports detected
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
>Sep 18 09:07:33 lillen kernel: usb usb4: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 4-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 4-0:1.0: 2 ports detected
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
>Sep 18 09:07:33 lillen kernel: usb usb5: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 5-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 5-0:1.0: 2 ports detected
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
>Sep 18 09:07:33 lillen kernel: usb usb6: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 6-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 6-0:1.0: 2 ports detected
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
>Sep 18 09:07:33 lillen kernel: usb usb7: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 7-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 7-0:1.0: 2 ports detected
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>Sep 18 09:07:33 lillen kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
>Sep 18 09:07:33 lillen kernel: usb usb8: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: hub 8-0:1.0: USB hub found
>Sep 18 09:07:33 lillen kernel: hub 8-0:1.0: 2 ports detected
>Sep 18 09:07:33 lillen kernel: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>Sep 18 09:07:33 lillen kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
>Sep 18 09:07:33 lillen kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Sep 18 09:07:33 lillen kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Sep 18 09:07:33 lillen kernel: mice: PS/2 mouse device common for all mice
>Sep 18 09:07:33 lillen kernel: rtc_cmos 00:03: RTC can wake from S4
>Sep 18 09:07:33 lillen kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>Sep 18 09:07:33 lillen kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>Sep 18 09:07:33 lillen kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 18 09:07:33 lillen kernel: ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>Sep 18 09:07:33 lillen kernel: ACPI: Device needs an ACPI driver
>Sep 18 09:07:33 lillen kernel: i801_smbus: probe of 0000:00:1f.3 failed with error -16
>Sep 18 09:07:33 lillen kernel: Driver for 1-wire Dallas network protocol.
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.0: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.1: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.2: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.3: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.4: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.5: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.6: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: coretemp coretemp.7: Using relative temperature scale!
>Sep 18 09:07:33 lillen kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>Sep 18 09:07:33 lillen kernel: iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
>Sep 18 09:07:33 lillen kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Sep 18 09:07:33 lillen kernel: device-mapper: uevent: version 1.0.3
>Sep 18 09:07:33 lillen kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>Sep 18 09:07:33 lillen kernel: cpuidle: using governor ladder
>Sep 18 09:07:33 lillen kernel: cpuidle: using governor menu
>Sep 18 09:07:33 lillen kernel: usbcore: registered new interface driver hiddev
>Sep 18 09:07:33 lillen kernel: usbcore: registered new interface driver usbhid
>Sep 18 09:07:33 lillen kernel: usbhid: v2.6:USB HID core driver
>Sep 18 09:07:33 lillen kernel: oprofile: using NMI interrupt.
>Sep 18 09:07:33 lillen kernel: TCP cubic registered
>Sep 18 09:07:33 lillen kernel: NET: Registered protocol family 17
>Sep 18 09:07:33 lillen kernel: registered taskstats version 1
>Sep 18 09:07:33 lillen kernel: rtc_cmos 00:03: setting system clock to 2009-09-18 09:07:13 UTC (1253264833)
>Sep 18 09:07:33 lillen kernel: ata9.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS11, max UDMA/33
>Sep 18 09:07:33 lillen kernel: ata9.01: ATA-7: SAMSUNG SP1203N, TL100-23, max UDMA/100
>Sep 18 09:07:33 lillen kernel: ata9.01: 234493056 sectors, multi 0: LBA48 
>Sep 18 09:07:33 lillen kernel: ata9.00: configured for UDMA/33
>Sep 18 09:07:33 lillen kernel: ata9.01: configured for UDMA/100
>Sep 18 09:07:33 lillen kernel: ata1: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: ata8: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: ata7: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: usb 2-5: new high speed USB device using ehci_hcd and address 2
>Sep 18 09:07:33 lillen kernel: firewire_core: created device fw0: GUID 001e8c0001e37431, S400
>Sep 18 09:07:33 lillen kernel: usb 2-5: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: ata2: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: usb 3-2: new low speed USB device using uhci_hcd and address 2
>Sep 18 09:07:33 lillen kernel: ata3: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: usb 3-2: configuration #1 chosen from 1 choice
>Sep 18 09:07:33 lillen kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
>Sep 18 09:07:33 lillen kernel: logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
>Sep 18 09:07:33 lillen kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
>Sep 18 09:07:33 lillen kernel: logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1
>Sep 18 09:07:33 lillen kernel: ata4: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep 18 09:07:33 lillen kernel: ata5.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
>Sep 18 09:07:33 lillen kernel: ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>Sep 18 09:07:33 lillen kernel: ata5.00: configured for UDMA/133
>Sep 18 09:07:33 lillen kernel: scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
>Sep 18 09:07:33 lillen kernel: sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>Sep 18 09:07:33 lillen kernel: sd 4:0:0:0: [sda] Write Protect is off
>Sep 18 09:07:33 lillen kernel: sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
>Sep 18 09:07:33 lillen kernel: sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 18 09:07:33 lillen kernel: sda:
>Sep 18 09:07:33 lillen kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0
>Sep 18 09:07:33 lillen kernel: sda1 sda2
>Sep 18 09:07:33 lillen kernel: sd 4:0:0:0: [sda] Attached SCSI disk
>Sep 18 09:07:33 lillen kernel: ata6: SATA link down (SStatus 0 SControl 300)
>Sep 18 09:07:33 lillen kernel: scsi 8:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-W162C TS11 PQ: 0 ANSI: 5
>Sep 18 09:07:33 lillen kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Sep 18 09:07:33 lillen kernel: Uniform CD-ROM driver Revision: 3.20
>Sep 18 09:07:33 lillen kernel: sr 8:0:0:0: Attached scsi CD-ROM sr0
>Sep 18 09:07:33 lillen kernel: sr 8:0:0:0: Attached scsi generic sg1 type 5
>Sep 18 09:07:33 lillen kernel: scsi 8:0:1:0: Direct-Access     ATA      SAMSUNG SP1203N  TL10 PQ: 0 ANSI: 5
>Sep 18 09:07:33 lillen kernel: sd 8:0:1:0: [sdb] 234493056 512-byte logical blocks: (120 GB/111 GiB)
>Sep 18 09:07:33 lillen kernel: sd 8:0:1:0: [sdb] Write Protect is off
>Sep 18 09:07:33 lillen kernel: sd 8:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>Sep 18 09:07:33 lillen kernel: sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 18 09:07:33 lillen kernel: sdb:
>Sep 18 09:07:33 lillen kernel: sd 8:0:1:0: Attached scsi generic sg2 type 0
>Sep 18 09:07:33 lillen kernel: sdb2 sdb3
>Sep 18 09:07:33 lillen kernel: sd 8:0:1:0: [sdb] Attached SCSI disk
>Sep 18 09:07:33 lillen kernel: Freeing unused kernel memory: 516k freed
>Sep 18 09:07:33 lillen kernel: Write protecting the kernel read-only data: 6868k
>Sep 18 09:07:33 lillen kernel: EXT3-fs: dm-0: couldn't mount because of unsupported optional features (240).
>Sep 18 09:07:33 lillen kernel: EXT2-fs: dm-0: couldn't mount because of unsupported optional features (240).
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-0): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 1763, dev dm-0:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-0): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: udev: starting version 145
>Sep 18 09:07:33 lillen kernel: Initializing USB Mass Storage driver...
>Sep 18 09:07:33 lillen kernel: scsi10 : SCSI emulation for USB Mass Storage devices
>Sep 18 09:07:33 lillen kernel: usb-storage: device found at 2
>Sep 18 09:07:33 lillen kernel: usb-storage: waiting for device to settle before scanning
>Sep 18 09:07:33 lillen kernel: usbcore: registered new interface driver usb-storage
>Sep 18 09:07:33 lillen kernel: USB Mass Storage support registered.
>Sep 18 09:07:33 lillen kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>Sep 18 09:07:33 lillen kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
>Sep 18 09:07:33 lillen kernel: hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>Sep 18 09:07:33 lillen kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-0): internal journal on dm-0:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-1): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 2325, dev dm-1:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-1): internal journal on dm-1:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-1): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-1): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-7): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 2326, dev dm-7:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-7): internal journal on dm-7:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-7): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-7): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-4): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 2327, dev dm-4:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-4): internal journal on dm-4:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-4): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-4): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-8): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 2328, dev dm-8:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-8): internal journal on dm-8:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-8): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-8): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-6): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 2329, dev dm-6:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-6): internal journal on dm-6:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-6): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-6): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-2): barriers enabled
>Sep 18 09:07:33 lillen kernel: kjournald2 starting: pid 2330, dev dm-2:8, commit interval 5 seconds
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-2): internal journal on dm-2:8
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-2): delayed allocation enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: file extents enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs: mballoc enabled
>Sep 18 09:07:33 lillen kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode
>Sep 18 09:07:33 lillen kernel: usb-storage: device scan complete
>Sep 18 09:07:33 lillen kernel: scsi 10:0:0:0: Direct-Access     FSC      MEMORYBIRD USB2  2.00 PQ: 0 ANSI: 2
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: Attached scsi generic sg3 type 0
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] 256000 512-byte logical blocks: (131 MB/125 MiB)
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] Write Protect is off
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] Mode Sense: 03 00 00 00
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] Assuming drive cache: write through
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] Assuming drive cache: write through
>Sep 18 09:07:33 lillen kernel: sdc: sdc1
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] Assuming drive cache: write through
>Sep 18 09:07:33 lillen kernel: sd 10:0:0:0: [sdc] Attached SCSI removable disk
>Sep 18 09:07:33 lillen kernel: Adding 18874360k swap on /dev/mapper/System-swap.  Priority:-1 extents:1 across:18874360k 
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: Allocating FIFO number 2
>Sep 18 09:07:33 lillen kernel: nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
>Sep 18 09:07:34 lillen kernel: NET: Registered protocol family 10
>Sep 18 09:07:34 lillen kernel: Bridge firewalling registered
>Sep 18 09:07:34 lillen kernel: virbr0: starting userspace STP failed, starting kernel STP
>Sep 18 09:07:35 lillen kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
>Sep 18 09:07:35 lillen kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Sep 18 09:07:35 lillen kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>Sep 18 09:07:35 lillen kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>Sep 18 09:07:35 lillen kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: PGRAPH_ERROR - nSource: PROTECTION_ERROR DMA_R_PROTECTION, nStatus:
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: PGRAPH_ERROR - Ch 2/4 Class 0x8397 Mthd 0x15e0 Data 0x00000000:0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: magic set 1:
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408900: 0x01800040
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408904: 0x00160000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408908: 0x01800000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x0040890c: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408910: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e08: 0xb5efd0f1
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e0c: 0x0000be9d
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e10: 0xdff73eff
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e14: 0x2492c111
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e18: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e1c: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e20: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00408e24: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: magic set 2:
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409900: 0x01800040
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409904: 0x00160000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409908: 0x01800000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x0040990c: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409910: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e08: 0xf77eefff
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e0c: 0x4000f774
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e10: 0xd7ff15fe
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e14: 0x04004801
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e18: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e1c: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e20: 0x00000000
>Sep 18 09:07:37 lillen kernel: nouveau 0000:02:00.0: 	0x00409e24: 0x00000000
>Sep 18 09:07:38 lillen kernel: sky2 eth1: enabling interface
>Sep 18 09:07:38 lillen kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
>Sep 18 09:07:38 lillen kernel: sky2 eth0: enabling interface
>Sep 18 09:07:38 lillen kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
>Sep 18 09:07:40 lillen kernel: sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>Sep 18 09:07:40 lillen kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Sep 18 09:07:45 lillen kernel: virbr0: no IPv6 routers present
>Sep 18 09:07:50 lillen kernel: eth0: no IPv6 routers present
>Sep 18 09:07:57 lillen kernel: RPC: Registered udp transport module.
>Sep 18 09:07:57 lillen kernel: RPC: Registered tcp transport module.
>Sep 18 09:08:09 lillen kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>Sep 18 10:51:34 lillen kernel: nfs: server 192.168.1.5 not responding, still trying
>Sep 18 10:53:43 lillen kernel: nfs: server 192.168.1.5 OK

Actions: View

Attachments on bug 24014: 29657 | 29658

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.