Attachment 31307 Details for Bug 24996 – dmesg

dmesg

dmesg (text/plain), 29.44 KB, created by Thomas Hoernes on 2009-11-19 06:31:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Hoernes

Created: 2009-11-19 06:31:27 UTC

Size: 29.44 KB

patch

obsolete

>Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FFC0000000 write-back
>  1 base 00DC000000 mask FFFC000000 write-combining
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Scanning 0 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000009fc00 (usable)
> modified: 000000000009fc00 - 00000000000a0000 (reserved)
> modified: 00000000000e4000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 000000003ffb0000 (usable)
> modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> modified: 000000003fff0000 - 0000000040000000 (reserved)
> modified: 00000000ff780000 - 0000000100000000 (reserved)
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 10000-15000
>RAMDISK: 3fef4000 - 3ff9fcd2
>Allocated new RAMDISK: 00100000 - 001abcd2
>Move RAMDISK from 000000003fef4000 - 000000003ff9fcd1 to 00100000 - 001abcd1
>ACPI: RSDP 000fa7c0 00014 (v00 ACPIAM)
>ACPI: RSDT 3ffb0000 00030 (v01 A M I  OEMRSDT  10000506 MSFT 00000097)
>ACPI: FACP 3ffb0200 00081 (v01 A M I  OEMFACP  10000506 MSFT 00000097)
>ACPI: DSDT 3ffb03f0 03A3E (v01  A0036 A0036001 00000001 MSFT 0100000D)
>ACPI: FACS 3ffc0000 00040
>ACPI: APIC 3ffb0390 00052 (v01 A M I  OEMAPIC  10000506 MSFT 00000097)
>ACPI: OEMB 3ffc0040 0003F (v01 A M I  OEMBIOS  10000506 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>135MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00011000 - 00017f00
>(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0001000000 - 000156da44]    TEXT DATA BSS ==> [0001000000 - 000156da44]
>  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>  #5 [000156e000 - 0001574234]              BRK ==> [000156e000 - 0001574234]
>  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>  #7 [0000100000 - 00001abcd2]      NEW RAMDISK ==> [0000100000 - 00001abcd2]
>  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
>found SMP MP-table at [c00ff780] ff780
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003ffb0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ffb0
>On node 0 totalpages: 261951
>free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 272 pages used for memmap
>  HighMem zone: 34466 pages, LIFO batch:7
>Using APIC driver default
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000)
>NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259903
>Kernel command line: root=/dev/sda1 ro nouveau.modeset=1
>Unknown boot option `nouveau.modeset=1': ignoring
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0003ffb0)
>Memory: 1032088k/1048256k available (3111k kernel code, 15420k reserved, 1120k data, 416k init, 138952k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1422000 - 0xc148a000   ( 416 kB)
>      .data : 0xc1309ddd - 0xc1421ea8   (1120 kB)
>      .text : 0xc1000000 - 0xc1309ddd   (3111 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>NR_IRQS:512
>Fast TSC calibration using PIT
>Detected 2002.426 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4006.72 BogoMIPS (lpj=6674753)
>Security Framework initialized
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>mce: CPU supports 5 MCE banks
>Performance Counters: AMD PMU driver.
>... version:                 0
>... bit width:               48
>... generic counters:        4
>... value mask:              0000ffffffffffff
>... max period:              00007fffffffffff
>... fixed-purpose counters:  0
>... counter mask:            000000000000000f
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20090521
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
>Brought up 1 CPUs
>Total of 1 processors activated (4006.72 BogoMIPS).
>CPU0 attaching NULL sched-domain.
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI Warning: Incorrect checksum in table [OEMB] - 07, should be F8 20090521 tbutils-246
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 10 32bit mmio: [0xdc000000-0xdfffffff]
>pci 0000:00:01.0: supports D1
>pci 0000:00:07.0: reg 10 32bit mmio: [0xf9a00000-0xf9a007ff]
>pci 0000:00:07.0: reg 14 io port: [0xa800-0xa87f]
>pci 0000:00:07.0: supports D2
>pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9c00000-0xf9c03fff]
>pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb0ff]
>pci 0000:00:0a.0: reg 30 32bit mmio: [0xf9b00000-0xf9b1ffff]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0f.0: reg 10 io port: [0xd000-0xd007]
>pci 0000:00:0f.0: reg 14 io port: [0xc800-0xc803]
>pci 0000:00:0f.0: reg 18 io port: [0xc400-0xc407]
>pci 0000:00:0f.0: reg 1c io port: [0xc000-0xc003]
>pci 0000:00:0f.0: reg 20 io port: [0xb800-0xb80f]
>pci 0000:00:0f.0: reg 24 io port: [0xb400-0xb4ff]
>pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
>pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f]
>pci 0000:00:10.0: supports D1 D2
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f]
>pci 0000:00:10.1: supports D1 D2
>pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.1: PME# disabled
>pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f]
>pci 0000:00:10.2: supports D1 D2
>pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.2: PME# disabled
>pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f]
>pci 0000:00:10.3: supports D1 D2
>pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.3: PME# disabled
>pci 0000:00:10.4: reg 10 32bit mmio: [0xf9e00000-0xf9e000ff]
>pci 0000:00:10.4: supports D1 D2
>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.4: PME# disabled
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
>pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff]
>pci 0000:00:11.5: supports D1 D2
>pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
>pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
>pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xfa000000-0xfaffffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0xf9f00000-0xf9f1ffff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xf9f00000-0xfbffffff]
>pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xf8ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:08: ioport range 0x680-0x6ff has been reserved
>system 00:08: ioport range 0x290-0x297 has been reserved
>system 00:09: ioport range 0x3e1-0x3e7 has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x800-0x87f has been reserved
>system 00:09: ioport range 0x400-0x41f has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xf9f00000-0xfbffffff
>pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xf8ffffff
>pci 0000:00:01.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfbffffff]
>pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf8ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>Switched to high resolution mode on CPU 0
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs...
>Freeing initrd memory: 687k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1258641462.156:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1746
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>pci 0000:01:00.0: Boot video device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 416k freed
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_via 0000:00:0f.1: version 0.3.4
>pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>ata1.00: ATA-7: ST3802110A, 2AAA, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3802110A       2AAA PQ: 0 ANSI: 5
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
>ata2.00: configured for UDMA/66
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
>sata_via 0000:00:0f.0: version 2.4
>sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 10
>scsi2 : sata_via
>scsi3 : sata_via
>ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20
>ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
> sda1 sda2 <
>sd 2:0:0:0: [sdb] Attached SCSI disk
> sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with writeback data mode.
>rtc_cmos 00:02: RTC can wake from S4
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 114 bytes nvram
>udev: starting version 146
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>lp: driver loaded but no devices found
>skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>skge 0000:00:0a.0: PCI: Disallowing DAC for device
>skge 1.13 addr 0xf9c00000 irq 17 chip Yukon-Lite rev 9
>skge eth0: addr 00:11:d8:bf:7f:fc
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000
>uhci_hcd: USB Universal Host Controller Interface driver
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ppdev: user-space parallel port driver
>ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[f9a00000-f9a007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
>Linux agpgart interface v0.103
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button [SLPB]
>processor LNXCPU:00: registered as cooling_device0
>phy0: Selected rate control algorithm 'minstrel'
>Registered led device: rt2500usb-phy0::radio
>Registered led device: rt2500usb-phy0::quality
>usbcore: registered new interface driver rt2500usb
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>lp0: using parport0 (interrupt-driven).
>cfg80211: Regulatory domain changed to country: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
>agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xdc000000
>VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
>VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>[drm] Initialized drm 1.1.0 20060810
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000020a272]
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043000a4)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>[drm] nouveau 0000:01:00.0: ... BIOS signature not found
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
>VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 05.43.02.92
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011312 00000000
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c083
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE15B
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE597
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEA11
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB9C
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC7C
>[TTM] Zone  kernel: Available graphics memory: 447268 kiB.
>[TTM] Zone highmem: Available graphics memory: 516744 kiB.
>[drm] nouveau 0000:01:00.0: 128 MiB VRAM
>agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
>agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
>nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
>[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
>[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>[drm] nouveau 0000:01:00.0: Detected a VGA connector
>[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:01:00.0: Detected a TV connector
>[drm] nouveau 0000:01:00.0: Saving VGA fonts
>[drm] nouveau 0000:01:00.0: Load detected on output B
>[drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo f6829700
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: vpll: n 22 m 5 log2p 0
>[drm] TMDS-8: set mode 1680x1050 38
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[drm] nouveau 0000:01:00.0: 0xD5B3: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output C
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: vpll: n 20 m 3 log2p 1
>[drm] TV-10: set mode 720x576 39
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
>Console: switching to colour frame buffer device 90x36
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>Adding 1044216k swap on /dev/sdb2.  Priority:-1 extents:1 across:1044216k 
>usb 1-2: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: HID 1241:1166 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input6
>generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:10.1-2/input0
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>scsi 4:0:0:0: Direct-Access     WD       2500JB External  0108 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
>sd 4:0:0:0: [sdc] Attached SCSI disk
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] nouveau 0000:01:00.0: Load detected on output B
>[drm] nouveau 0000:01:00.0: Load detected on output B
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: vpll: n 20 m 3 log2p 1
>[drm] TV-10: set mode 1024x768 3b
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
>wlan0: authenticate with AP 00:14:bf:3c:ca:b3
>wlan0: authenticated
>wlan0: associate with AP 00:14:bf:3c:ca:b3
>wlan0: RX AssocResp from 00:14:bf:3c:ca:b3 (capab=0x431 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>[drm] nouveau 0000:01:00.0: Load detected on output B
>[drm] nouveau 0000:01:00.0: Load detected on output B

Actions: View

Attachments on bug 24996: 31062 | 31063 | 31065 | 31117 | 31253 | 31286 | 31294 | 31307 | 31308 | 32204 | 32206 | 32207

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.