Attachment 31565 Details for Bug 25352 – dmesg log

dmesg log

dmesg.log (text/plain), 31.22 KB, created by Jussi Saarinen on 2009-11-29 16:02:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jussi Saarinen

Created: 2009-11-29 16:02:25 UTC

Size: 31.22 KB

patch

obsolete

>Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>DMI 2.2 present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x7fff0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 0D0000000 mask FF8000000 write-combining
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Scanning 0 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000009d800 (usable)
> modified: 000000000009d800 - 00000000000a0000 (reserved)
> modified: 00000000000f0000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 000000007fff0000 (usable)
> modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> modified: 000000007fff3000 - 0000000080000000 (ACPI data)
> modified: 00000000fec00000 - 00000000fec01000 (reserved)
> modified: 00000000fee00000 - 00000000fee01000 (reserved)
> modified: 00000000ffff0000 - 0000000100000000 (reserved)
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 10000-15000
>RAMDISK: 7feb9000 - 7ffdf4ac
>Allocated new RAMDISK: 00100000 - 002264ac
>Move RAMDISK from 000000007feb9000 - 000000007ffdf4ab to 00100000 - 002264ab
>ACPI: RSDP 000f74f0 00014 (v00 Nvidia)
>ACPI: RSDT 7fff3000 00028 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: FACP 7fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: DSDT 7fff30c0 04B6D (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
>ACPI: FACS 7fff0000 00040
>1159MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00011000 - 00017f00
>(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0001000000 - 000156da44]    TEXT DATA BSS ==> [0001000000 - 000156da44]
>  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>  #5 [000156e000 - 0001574072]              BRK ==> [000156e000 - 0001574072]
>  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>  #7 [0000100000 - 00002264ac]      NEW RAMDISK ==> [0000100000 - 00002264ac]
>  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007fff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009d
>    0: 0x00000100 -> 0x0007fff0
>On node 0 totalpages: 524157
>free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3949 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2320 pages used for memmap
>  HighMem zone: 294626 pages, LIFO batch:31
>Using APIC driver default
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Found and enabled local APIC!
>nr_irqs_gsi: 16
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
>NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 14 pages at c257f000, static data 34332 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520061
>Kernel command line: root=/dev/disk/by-uuid/f972dbff-3a65-4c03-9464-37fe418e59bf ro
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0007fff0)
>Memory: 2071660k/2097088k available (3111k kernel code, 24060k reserved, 1120k data, 416k init, 1187784k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1422000 - 0xc148a000   ( 416 kB)
>      .data : 0xc1309ddd - 0xc1421ea8   (1120 kB)
>      .text : 0xc1000000 - 0xc1309ddd   (3111 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>NR_IRQS:512
>Fast TSC calibration using PIT
>Detected 2087.895 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4177.78 BogoMIPS (lpj=6959650)
>Security Framework initialized
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>mce: CPU supports 4 MCE banks
>Performance Counters: AMD PMU driver.
>... version:                 0
>... bit width:               48
>... generic counters:        4
>... value mask:              0000ffffffffffff
>... max period:              00007fffffffffff
>... fixed-purpose counters:  0
>... counter mask:            000000000000000f
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 11k freed
>ACPI: Core revision 20090521
>ACPI: setting ELCR to 0200 (from 1820)
>weird, boot CPU (#0) not listed by the BIOS.
>SMP motherboard not detected.
>SMP disabled
>Brought up 1 CPUs
>Total of 1 processors activated (4177.78 BogoMIPS).
>CPU0 attaching NULL sched-domain.
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
>pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
>pci 0000:00:01.1: reg 10 io port: [0xc000-0xc01f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: reg 10 32bit mmio: [0xec080000-0xec080fff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: reg 10 32bit mmio: [0xec083000-0xec083fff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:02.2: reg 10 32bit mmio: [0xec086000-0xec0860ff]
>pci 0000:00:02.2: supports D1 D2
>pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.2: PME# disabled
>pci 0000:00:04.0: reg 10 32bit mmio: [0xec087000-0xec087fff]
>pci 0000:00:04.0: reg 14 io port: [0xc400-0xc407]
>pci 0000:00:04.0: supports D1 D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: reg 10 32bit mmio: [0xec000000-0xec07ffff]
>pci 0000:00:05.0: supports D1 D2
>pci 0000:00:06.0: reg 10 io port: [0xb000-0xb0ff]
>pci 0000:00:06.0: reg 14 io port: [0xb400-0xb47f]
>pci 0000:00:06.0: reg 18 32bit mmio: [0xec081000-0xec081fff]
>pci 0000:00:06.0: supports D1 D2
>pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f]
>pci 0000:00:0d.0: reg 10 32bit mmio: [0xec084000-0xec0847ff]
>pci 0000:00:0d.0: reg 14 32bit mmio: [0xec085000-0xec08503f]
>pci 0000:00:0d.0: supports D1 D2
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:01:09.0: reg 10 io port: [0x9000-0x907f]
>pci 0000:01:09.0: reg 18 io port: [0x9400-0x94ff]
>pci 0000:01:09.0: reg 1c 32bit mmio: [0xeb020000-0xeb020fff]
>pci 0000:01:09.0: reg 20 32bit mmio: [0xeb000000-0xeb01ffff]
>pci 0000:01:09.0: reg 30 32bit mmio: [0x000000-0x007fff]
>pci 0000:01:09.0: supports D1
>pci 0000:00:08.0: bridge io port: [0x9000-0x9fff]
>pci 0000:00:08.0: bridge 32bit mmio: [0xea000000-0xebffffff]
>pci 0000:02:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
>pci 0000:02:00.0: reg 14 io port: [0xa000-0xa0ff]
>pci 0000:02:00.0: reg 18 32bit mmio: [0xe9000000-0xe900ffff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.1: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
>pci 0000:02:00.1: reg 14 32bit mmio: [0xe9010000-0xe901ffff]
>pci 0000:02:00.1: supports D1 D2
>pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
>pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17)
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: ioport range 0x4000-0x407f has been reserved
>system 00:00: ioport range 0x4080-0x40ff has been reserved
>system 00:00: ioport range 0x4400-0x447f has been reserved
>system 00:00: ioport range 0x4480-0x44ff has been reserved
>system 00:00: ioport range 0x4200-0x427f has been reserved
>system 00:00: ioport range 0x4280-0x42ff has been reserved
>system 00:01: ioport range 0x5000-0x503f has been reserved
>system 00:02: iomem range 0xdb000-0xdbfff has been reserved
>system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:02: iomem range 0xfc000-0xfffff could not be reserved
>system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved
>system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:02: iomem range 0x0-0x9ffff could not be reserved
>system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved
>system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:04: ioport range 0xb78-0xb7b has been reserved
>system 00:04: ioport range 0xf78-0xf7b has been reserved
>system 00:04: ioport range 0xa78-0xa7b has been reserved
>system 00:04: ioport range 0xe78-0xe7b has been reserved
>system 00:04: ioport range 0xbbc-0xbbf has been reserved
>system 00:04: ioport range 0xfbc-0xfbf has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0x294-0x297 has been reserved
>system 00:04: ioport range 0x4e0-0x4e7 has been reserved
>pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:08.0:   IO window: 0x9000-0x9fff
>pci 0000:00:08.0:   MEM window: 0xea000000-0xebffffff
>pci 0000:00:08.0:   PREFETCH window: 0x80000000-0x800fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0xa000-0xafff
>pci 0000:00:1e.0:   MEM window: 0xe8000000-0xe9ffffff
>pci 0000:00:1e.0:   PREFETCH window: 0xd8000000-0xe7ffffff
>pci 0000:00:08.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
>pci_bus 0000:01: resource 1 mem: [0xea000000-0xebffffff]
>pci_bus 0000:01: resource 2 pref mem [0x80000000-0x800fffff]
>pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
>pci_bus 0000:02: resource 1 mem: [0xe8000000-0xe9ffffff]
>pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs...
>Freeing initrd memory: 1177k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1259536340.266:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1730
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:02:00.0: Boot video device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>Switched to high resolution mode on CPU 0
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 416k freed
>Linux agpgart interface v0.103
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon default to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>radeon 0000:02:00.0: PCI INT A -> Link[LNK4] -> GSI 5 (level, low) -> IRQ 5
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xE9000000
>[drm] register mmio size: 65536
>[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[drm] Clocks initialized !
>[drm] Generation 1 PCI interface in multifunction mode
>[drm] Limiting VRAM to one aperture
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 128bits DDR
>[drm] radeon: 2 quad pipes, 1 Z pipes initialized.
>agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
>agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
>radeon 0000:02:00.0: putting AGP V3 device into 8x mode
>[drm] radeon: VRAM 128M
>[drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
>[drm] radeon: GTT 128M
>[drm] radeon: GTT from 0xD0000000 to 0xD7FFFFFF
>[drm] radeon: irq initialized.
>[TTM] TTM available graphics memory: 1012 MiB
>[TTM] TTM available object memory: 432 MiB
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 128M of GTT memory ready.
>[drm] radeon: cp idle (0x10000C00)
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x00000000D0000000
>[drm] ring test succeeded in 0 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Default TV standard: PAL
>[drm] 27.000000000 MHz TV ref clk
>[drm] No TV DAC info found in BIOS
>[drm] DFP table revision: 3
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>i2c-adapter i2c-0: unable to read EDID block.
>radeon 0000:02:00.0: VGA-1: no EDID data
>[drm] fb mappable at 0xD8040000
>[drm] vram apper at 0xD8000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>[drm] TMDS-8: set mode 1280x1024 1a
>Console: switching to colour frame buffer device 160x64
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] radeon: kernel modesetting successfully initialized.
>[drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_promise 0000:01:09.0: version 2.12
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>sata_promise 0000:01:09.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
>Floppy drive(s): fd0 is 1.44M
>pata_amd 0000:00:09.0: version 0.4.1
>pata_amd 0000:00:09.0: setting latency timer to 64
>scsi0 : sata_promise
>scsi1 : pata_amd
>scsi2 : sata_promise
>scsi3 : pata_amd
>ata4: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata5: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>scsi4 : sata_promise
>ata1: SATA max UDMA/133 mmio m4096@0xeb020000 ata 0xeb020200 irq 11
>ata2: SATA max UDMA/133 mmio m4096@0xeb020000 ata 0xeb020280 irq 11
>ata3: PATA max UDMA/133 mmio m4096@0xeb020000 ata 0xeb020300 irq 11
>FDC 0 is a post-1991 82077
>ata4.00: ATA-6: SAMSUNG SP8004H, QW100-61, max UDMA/100
>ata4.00: 156368016 sectors, multi 16: LBA 
>ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A102, max UDMA/33
>ata4: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c0c7c0) ACPI=0x3f01f (20:60:0x1f)
>ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c0c7c0) ACPI=0x701f (20:60:0x1f)
>ata4.00: configured for UDMA/100
>ata4.01: configured for UDMA/33
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP8004H  QW10 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4120B A102 PQ: 0 ANSI: 5
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
>ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata5.00: ATA-7: Maxtor 6L200P0, BAH41G10, max UDMA/133
>ata5.00: 398297088 sectors, multi 16: LBA48 
>ata5.01: ATAPI: TOSHIBA DVD-ROM SD-R1312, 1010, max UDMA/33
>ata5: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc6c0c7c0) ACPI=0x7f01f (15:60:0x1f)
>ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c0c7c0) ACPI=0x701f (15:60:0x1f)
>ata5.00: configured for UDMA/133
>ata5.01: configured for UDMA/33
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L200P0   BAH4 PQ: 0 ANSI: 5
>scsi 3:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-R1312 1010 PQ: 0 ANSI: 5
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
>ata3.00: ATA-7: Maxtor 6L300R0, BAH41G10, max UDMA/133
>ata3.00: 586114704 sectors, multi 0: LBA48 
>ata3.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100
>ata3.01: 625142448 sectors, multi 0: LBA48 
>ata3.00: configured for UDMA/133
>ata3.01: configured for UDMA/100
>scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6L300R0   BAH4 PQ: 0 ANSI: 5
>scsi 4:0:1:0: Direct-Access     ATA      ST3320620A       3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 3:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB)
>sd 3:0:0:0: [sdb] Write Protect is off
> sda1 sda2 sda3 sda4 <
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>spurious 8259A interrupt: IRQ7.
> sda5
> sdb:
>sd 0:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
>sd 0:0:0:0: [sdc] Write Protect is off
> sda6
>sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdb1 sdb2
> sda7 >
> sdc1
>sd 0:0:0:0: [sdc] Attached SCSI disk
>sd 3:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: [sda] Attached SCSI disk
>sd 2:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 2:0:0:0: [sdd] Write Protect is off
>sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd:
>sd 4:0:0:0: [sde] 586114704 512-byte logical blocks: (300 GB/279 GiB)
>sd 4:0:0:0: [sde] Write Protect is off
> sdd1
>sd 2:0:0:0: [sdd] Attached SCSI disk
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde:
>sd 4:0:1:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 4:0:1:0: [sdf] Write Protect is off
>sd 4:0:1:0: [sdf] Mode Sense: 00 3a 00 00
>sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde1
> sdf:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
> sdf1
>sd 4:0:0:0: [sde] Attached SCSI disk
>sd 4:0:1:0: [sdf] Attached SCSI disk
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr 3:0:1:0: Attached scsi CD-ROM sr1
>EXT4-fs (sda5): barriers enabled
>kjournald2 starting: pid 652, dev sda5:8, commit interval 5 seconds
>EXT4-fs (sda5): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda5): mounted filesystem with ordered data mode
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram
>udev: starting version 146
>fuse init (API version 7.12)
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>forcedeth 0000:00:04.0: PCI INT A -> Link[LMAC] -> GSI 12 (level, low) -> IRQ 12
>forcedeth 0000:00:04.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:1:0: Attached scsi generic sg1 type 5
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>sr 3:0:1:0: Attached scsi generic sg3 type 5
>sd 0:0:0:0: Attached scsi generic sg4 type 0
>sd 2:0:0:0: Attached scsi generic sg5 type 0
>sd 4:0:0:0: Attached scsi generic sg6 type 0
>sd 4:0:1:0: Attached scsi generic sg7 type 0
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:04:61:07:02:39
>forcedeth 0000:00:04.0: timirq lnktim desc-v1
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>i2c-adapter i2c-2: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-3: nForce2 SMBus adapter at 0x5040
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
>ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUB2] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:02.2: setting latency timer to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
>ehci_hcd 0000:00:02.2: debug port 1
>ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.2: irq 11, io mem 0xec086000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>ACPI: Power Button [PWRB]
>lp: driver loaded but no devices found
>processor LNXCPU:00: registered as cooling_device0
>ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
>ohci1394 0000:00:0d.0: PCI INT A -> Link[LFIR] -> GSI 5 (level, low) -> IRQ 5
>ohci1394 0000:00:0d.0: setting latency timer to 64
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (45 C)
>, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[ec084000-ec0847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUBA] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 11, io mem 0xec080000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
>ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUBB] -> GSI 12 (level, low) -> IRQ 12
>ohci_hcd 0000:00:02.1: setting latency timer to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 12, io mem 0xec083000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>parport0: Printer, HEWLETT-PACKARD DESKJET 710C
>lp0: using parport0 (interrupt-driven).
>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 59659kHz
>fan PNP0C0B:00: registered as cooling_device1
>ACPI: Fan [FAN] (on)
>usb 3-2: new low speed USB device using ohci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>ppdev: user-space parallel port driver
>ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
>Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 11 (level, low) -> IRQ 11
>Intel ICH 0000:00:06.0: setting latency timer to 64
>ohci1394: fw-host0: SelfID received outside of bus reset sequence
>intel8x0_measure_ac97_clock: measured 122148 usecs (5888 samples)
>intel8x0: clocking to 48000
>usbcore: registered new interface driver hiddev
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input4
>generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.1-2/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.1/input/input5
>generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2/input1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000461030d5891a5]
>EXT4-fs (sda5): internal journal on sda5:8
>EXT4-fs (sda3): barriers enabled
>kjournald2 starting: pid 3429, dev sda3:8, commit interval 5 seconds
>EXT4-fs (sda3): internal journal on sda3:8
>EXT4-fs (sda3): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda3): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>EXT4-fs (sda7): barriers enabled
>kjournald2 starting: pid 3433, dev sda7:8, commit interval 5 seconds
>EXT4-fs (sda7): internal journal on sda7:8
>EXT4-fs (sda7): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda7): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdd1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sde1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdf1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>Adding 4200988k swap on /dev/sda2.  Priority:-1 extents:1 across:4200988k

Actions: View

Attachments on bug 25352: 31564 | 31565 | 31566

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.