Attachment 31748 Details for Bug 25451 – Kernel log from boot until resume

Kernel log from boot until resume

d2 (text/plain), 66.36 KB, created by Lukasz Wrzosek on 2009-12-04 09:46:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lukasz Wrzosek

Created: 2009-12-04 09:46:02 UTC

Size: 66.36 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31.6-145.fc12.i686.PAE (mockbuild@x86-2.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 21 16:12:37 EST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000df44d400 (usable)
> BIOS-e820: 00000000df44f400 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
>DMI 2.4 present.
>last_pfn = 0x120000 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-D3FFF write-protect
>  D4000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask 800000000 write-back
>  1 base 0E0000000 mask FE0000000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 32GB, type WB
>reg 1, base: 3584MB, range: 512MB, type UC
>total RAM coverred: 32256M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 4GB, type WB
>reg 1, base: 3584MB, range: 512MB, type UC
>reg 2, base: 4GB, range: 4GB, type WB
>reg 3, base: 8GB, range: 8GB, type WB
>reg 4, base: 16GB, range: 16GB, type WB
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 01000000
>init_memory_mapping: 0000000000000000-00000000375fe000
>NX (Execute Disable) protection: active
> 0000000000 - 0000200000 page 4k
> 0000200000 - 0037400000 page 2M
> 0037400000 - 00375fe000 page 4k
>kernel direct mapping tables up to 375fe000 @ 7000-f000
>RAMDISK: 374c4000 - 37fefe77
>Allocated new RAMDISK: 00afb000 - 01626e77
>Move RAMDISK from 00000000374c4000 - 0000000037fefe76 to 00afb000 - 01626e76
>ACPI: RSDP 000fb9c0 00024 (v02 DELL  )
>ACPI: XSDT df451e00 0006C (v01 DELL    M09     27D90A1E ASL  00000061)
>ACPI: FACP df451c9c 000F4 (v04 DELL    M09     27D90A1E ASL  00000061)
>ACPI: DSDT df452400 06D0B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
>ACPI: FACS df460c00 00040
>ACPI: HPET df451f00 00038 (v01 DELL    M09     00000001 ASL  00000061)
>ACPI: DMAR df460400 000B0 (v01 DELL    M09     27D90A1E ASL  00000061)
>ACPI: APIC df452000 00068 (v01 DELL    M09     27D90A1E ASL  00000047)
>ACPI: ASF! df451c00 0006A (v32 DELL    M09     27D90A1E ASL  00000061)
>ACPI: MCFG df451fc0 0003E (v16 DELL    M09     27D90A1E ASL  00000061)
>ACPI: TCPA df452300 00032 (v01                 00000000 ASL  00000000)
>ACPI: SLIC df45209c 00176 (v01 DELL    M09     27D90A1E ASL  00000061)
>ACPI: SSDT df45032d 0066C (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>3722MB HIGHMEM available.
>885MB LOWMEM available.
>  mapped low ram: 0 - 375fe000
>  low ram: 0 - 375fe000
>  node 0 low ram: 00000000 - 375fe000
>  node 0 bootmap 0000b000 - 00011ec0
>(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000af1210]    TEXT DATA BSS ==> [0000400000 - 0000af1210]
>  #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
>  #5 [0000af2000 - 0000afa184]              BRK ==> [0000af2000 - 0000afa184]
>  #6 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
>  #7 [0000afb000 - 0001626e77]      NEW RAMDISK ==> [0000afb000 - 0001626e77]
>  #8 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000375fe
>  HighMem  0x000375fe -> 0x00120000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009b
>    0: 0x00000100 -> 0x000df44d
>    0: 0x00100002 -> 0x00120000
>On node 0 totalpages: 1045478
>free_area_init_node: node 0, pgdat c0995bc0, node_mem_map c1627000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3963 pages, LIFO batch:0
>  Normal zone: 1740 pages used for memmap
>  Normal zone: 220978 pages, LIFO batch:31
>  HighMem zone: 7445 pages used for memmap
>  HighMem zone: 811320 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009b000 - 000000000009c000
>PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 15 pages at c3a37000, static data 37788 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1036261
>Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31.6-145.fc12.i686.PAE root=UUID=3397687a-3e64-4ca0-85b6-876d4688ae7f ro quiet rhgb
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 23592960 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000375fe:00120000)
>Memory: 4101540k/4718592k available (3569k kernel code, 79512k reserved, 2214k data, 448k init, 3275060k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc09a7000 - 0xc0a17000   ( 448 kB)
>      .data : 0xc077c7af - 0xc09a6028   (2214 kB)
>      .text : 0xc0400000 - 0xc077c7af   (3569 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2526.826 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.65 BogoMIPS (lpj=2526826)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Counters: Core2 events, Intel PMU driver.
>... version:                 2
>... bit width:               40
>... generic counters:        2
>... value mask:              000000ffffffffff
>... max period:              000000007fffffff
>... fixed-purpose counters:  3
>... counter mask:            0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20616 entries in 41 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5053.73 BogoMIPS (lpj=2526867)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (10107.38 BogoMIPS).
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=500 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=192 bytes
>sizeof(task_struct)=3256 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 18:07:28  Date: 12/04/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>DMAR: Forcing write-buffer flush capability
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:19.0: reg 10 32bit mmio: [0xf6fe0000-0xf6ffffff]
>pci 0000:00:19.0: reg 14 32bit mmio: [0xf6fdb000-0xf6fdbfff]
>pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
>pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
>pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6fdc000-0xf6fdffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
>pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
>pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
>pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
>pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
>pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
>pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6fdaf00-0xf6fdafff]
>pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
>pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
>pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
>pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
>pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffc000-0xf1ffffff]
>pci 0000:0c:00.0: supports D1 D2
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
>pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
>pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:03:01.0: supports D1 D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>pci 0000:03:01.1: reg 10 32bit mmio: [0xf1bff800-0xf1bfffff]
>pci 0000:03:01.1: supports D1 D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>pci 0000:03:01.2: reg 10 32bit mmio: [0xf1bff600-0xf1bff6ff]
>pci 0000:03:01.2: supports D1 D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>pci 0000:03:01.3: reg 10 32bit mmio: [0xf1bff700-0xf1bff7ff]
>pci 0000:03:01.3: supports D1 D2
>pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.3: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf1b00000-0xf1bfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:Host address width 36
>DMAR:DRHD base: 0x000000fed10000 flags: 0x0
>IOMMU fed10000: ver 1:0 cap c9008020e30260 ecap 1000
>DMAR:DRHD base: 0x000000fed13000 flags: 0x1
>IOMMU fed13000: ver 1:0 cap c9008020630260 ecap 1000
>DMAR:RMRR base: 0x000000dfbe7000 end: 0x000000dfbfffff
>DMAR:No ATSR found
>IOMMU 0xfed10000: using Register based invalidation
>IOMMU 0xfed13000: using Register based invalidation
>IOMMU: software identity mapping for device 0000:01:00.0
>IOMMU: Setting RMRR:
>IOMMU: Setting identity map for device 0000:00:1d.0 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1d.1 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1d.2 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1d.7 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1a.0 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1a.1 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1a.2 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Setting identity map for device 0000:00:1a.7 [0xdfbe7000 - 0xdfc00000]
>IOMMU: Prepare 0-16MiB unity mapping for LPC
>IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
>PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: ioport range 0xc80-0xcaf has been reserved
>system 00:05: ioport range 0xcc0-0xcff could not be reserved
>system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:09: ioport range 0xcb0-0xcbb has been reserved
>system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:0a: ioport range 0x900-0x92f has been reserved
>system 00:0a: ioport range 0x931-0x933 has been reserved
>system 00:0a: ioport range 0x935-0x97f has been reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0a: ioport range 0x1000-0x1005 has been reserved
>system 00:0a: ioport range 0x1008-0x100f has been reserved
>system 00:0b: ioport range 0xf400-0xf4fe has been reserved
>system 00:0b: ioport range 0x1006-0x1007 has been reserved
>system 00:0b: ioport range 0x100a-0x1059 could not be reserved
>system 00:0b: ioport range 0x1060-0x107f has been reserved
>system 00:0b: ioport range 0x1080-0x10bf has been reserved
>system 00:0b: ioport range 0x1100-0x111f has been reserved
>system 00:0b: ioport range 0x1010-0x102f has been reserved
>system 00:0b: ioport range 0x809-0x809 has been reserved
>system 00:0c: iomem range 0x0-0x9efff could not be reserved
>system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xd3fff could not be reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0xdf44d3ff could not be reserved
>system 00:0c: iomem range 0xdf44d400-0xdfefffff could not be reserved
>system 00:0c: iomem range 0xdff00000-0xdfffffff has been reserved
>system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
>system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
>system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
>system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
>system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
>system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
>system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
>pci 0000:00:1e.0: BAR 15: can't allocate mem resource [0x120000000-0xffffffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xd000-0xdfff
>pci 0000:00:01.0:   MEM window: 0xf2000000-0xf6efffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0xf1f00000-0xf1ffffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
>pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.3:   MEM window: 0xf1c00000-0xf1efffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
>pci 0000:03:01.0: BAR 15: can't allocate mem resource [0x20000000-0xffffffff]
>pci 0000:03:01.0: BAR 16: can't allocate mem resource [0x20000000-0xffffffff]
>pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
>pci 0000:03:01.0:   IO window: 0x002000-0x0020ff
>pci 0000:03:01.0:   IO window: 0x002400-0x0024ff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1e.0:   MEM window: 0xf1b00000-0xf1bfffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
>pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
>pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
>pci_bus 0000:0e: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:0e: resource 1 mem: [0xf1c00000-0xf1efffff]
>pci_bus 0000:0e: resource 2 pref mem [0xf0000000-0xf01fffff]
>pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:03: resource 1 mem: [0xf1b00000-0xf1bfffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:04: resource 0 io:  [0x2000-0x20ff]
>pci_bus 0000:04: resource 1 io:  [0x2400-0x24ff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 11439k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1259950048.688:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1638
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: irq 29 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 30 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: can't get bus number, assuming 0
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1] registered
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SBTN]
>ACPI: SSDT df450999 00281 (v01  PmRef   BspIst 00003000 INTL 20050624)
>ACPI: SSDT df450df1 005C6 (v01  PmRef   BspCst 00003001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT df450c1a 001D7 (v01  PmRef    ApIst 00003000 INTL 20050624)
>ACPI: SSDT df4513b7 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor LNXCPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (50 C)
>isapnp: Scanning for PnP cards...
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 31
>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 31
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 31
>ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 31
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.31.6-145.fc12.i686.PAE uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Warning: Keylock active.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 5:311:139
>block ram4: hash matches
>acpi device:10: hash matches
>rtc_cmos 00:03: setting system clock to 2009-12-04 18:07:29 UTC (1259950049)
>Initalizing network drop monitor service
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>Clocksource tsc unstable (delta = -159750451 ns)
>usb 1-6: new high speed USB device using ehci_hcd and address 3
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: ST9160823ASG, 3.ADE, max UDMA/133
>ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST9160823ASG     3.AD PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8
>usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>usb 1-6: Product: Laptop_Integrated_Webcam_0.3M
>usb 1-6: Manufacturer: SONiX Technology Inc.
>usb 1-6: configuration #1 chosen from 1 choice
>input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
>input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: New USB device found, idVendor=0a5c, idProduct=5801
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-1: Product: 5880
>usb 5-1: Manufacturer: Broadcom Corp
>usb 5-1: SerialNumber: 0123456789ABCD
>usb 5-1: configuration #0 chosen from 1 choice
>usb 5-1: config 0 descriptor??
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: PLDS DVD+/-RW DU-8A2S, 4D12, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DU-8A2S  4D12 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>usb 6-2: New USB device found, idVendor=1532, idProduct=0007
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: DeathAdder
>usb 6-2: Manufacturer: Razer
>usb 6-2: configuration #1 chosen from 1 choice
>input: Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input7
>generic-usb 0003:1532:0007.0001: input,hidraw0: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1d.0-2/input0
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>Freeing unused kernel memory: 448k freed
>Write protecting the kernel text: 3572k
>Write protecting the kernel read-only data: 1716k
>dracut: dracut-002-13.4.git8f397a9b.fc12
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
>[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298580a2)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 62.98.68.00
>[drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
>[drm] nouveau 0000:01:00.0: G80+ LVDS not initialized by driver; ignoring conf bits
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022386 0f200010
>[drm] nouveau 0000:01:00.0: DCB I2C table has port type 6
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332 00020010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 040333a6 0f200010
>[drm] nouveau 0000:01:00.0: DCB I2C table has port type 6
>[drm] nouveau 0000:01:00.0: Raw DCB entry 5: 04033312 00020010
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDB6B
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDF70
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE742
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE810
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAB9
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB1E
>[drm] nouveau 0000:01:00.0: 0xEB1E: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 0xC522: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xCCA2: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xC9D6: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xCCA2: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xC9D6: parsing output script 0
>[TTM] Zone  kernel: Available graphics memory: 419612 kiB.
>[TTM] Zone highmem: Available graphics memory: 2057142 kiB.
>[drm] nouveau 0000:01:00.0: 256 MiB VRAM
>[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:01:00.0: Detected a LVDS output
>[drm] nouveau 0000:01:00.0: Detected a DAC output
>[drm] nouveau 0000:01:00.0: Detected a DP output
>[drm] nouveau 0000:01:00.0: Detected a TMDS output
>[drm] nouveau 0000:01:00.0: Detected a DP output
>[drm] nouveau 0000:01:00.0: Detected a TMDS output
>[drm] nouveau 0000:01:00.0: Detected a LVDS connector
>[drm] nouveau 0000:01:00.0: Detected a VGA connector
>[drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
>[drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo f5d3eb00
>fbcon: nouveaufb (fb0) is primary device
>[drm] LVDS-7: set mode 1440x900 1f
>Console: switching to colour frame buffer device 180x56
>[drm] nouveau 0000:01:00.0: 0xC526: parsing output script 1
>[drm] nouveau 0000:01:00.0: 0xC3D7: parsing clock script 0
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: 0xC51D: parsing clock script 1
>acpi device:39: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:36/device:37/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:024f]
>yenta_cardbus 0000:03:01.0: CardBus bridge, secondary bus 0000:04
>yenta_cardbus 0000:03:01.0:   IO window: 0x002000-0x0020ff
>yenta_cardbus 0000:03:01.0:   IO window: 0x002400-0x0024ff
>yenta_cardbus 0000:03:01.0:   PREFETCH window: 0xf0400000-0xf07fffff
>yenta_cardbus 0000:03:01.0:   MEM window: 0xf0800000-0xf0bfffff
>yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x04b8, PCI irq 19
>yenta_cardbus 0000:03:01.0: Socket status: 30000006
>pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1b00000 - 0xf1bfffff
>EXT4-fs (sda1): barriers enabled
>kjournald2 starting: pid 250, dev sda1:8, commit interval 5 seconds
>EXT4-fs (sda1): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda1): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/sda1
>dracut: Switching root
>udev: starting version 145
>ACPI: WMI: Mapper loaded
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:a7:f7:b9
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 4003ff-0ff
>b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
>iTCO_vendor_support: vendor-support=0
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:03:01.3 [1180:0843] (rev 11)
>ricoh-mmc: Controller is now disabled.
>Linux video capture interface: v2.00
>ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>firewire_ohci 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
>sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
>sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
>cfg80211: Calling CRDA to update world regulatory domain
>uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63f8)
>input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>b43-phy0: Broadcom 4312 WLAN found (core revision 15)
>b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
>b43: probe of ssb0:0 failed with error -95
>Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
>firewire_core: created device fw0: GUID 424fc0001495b1e1, S400
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3866:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3870:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3871:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3882:    inputs: mic=0xb, fmic=0xe, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:3186: stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
>input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>name_count maxed, losing inode data: dev=00:05, inode=6436
>device-mapper: multipath: version 1.1.0 loaded
>EXT4-fs (sda1): internal journal on sda1:8
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>0000:00:19.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Bridge firewalling registered
>virbr0: starting userspace STP failed, starting kernel STP
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
>lo: Disabled Privacy Extensions
>eth0: no IPv6 routers present
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>ALSA sound/pci/hda/hda_intel.c:691: azx_get_response timeout, switching to polling mode: last cmd=0x00af0900
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>sdhci-pci 0000:03:01.2: PME# disabled
>sdhci-pci 0000:03:01.2: PCI INT C disabled
>ACPI handle has no context!
>ACPI handle has no context!
>b43-pci-bridge 0000:0c:00.0: PCI INT A disabled
>[drm] nouveau 0000:01:00.0: Evicting buffers...
>[drm] nouveau 0000:01:00.0: Idling channels...
>[drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[drm] nouveau 0000:01:00.0: And we're gone!
>nouveau 0000:01:00.0: PCI INT A disabled
>ehci_hcd 0000:00:1d.7: PCI INT A disabled
>uhci_hcd 0000:00:1d.2: PCI INT C disabled
>uhci_hcd 0000:00:1d.1: PCI INT B disabled
>uhci_hcd 0000:00:1d.0: PCI INT A disabled
>HDA Intel 0000:00:1b.0: PCI INT A disabled
>ehci_hcd 0000:00:1a.7: PCI INT C disabled
>uhci_hcd 0000:00:1a.2: PCI INT C disabled
>uhci_hcd 0000:00:1a.1: PCI INT B disabled
>uhci_hcd 0000:00:1a.0: PCI INT A disabled
>e1000e 0000:00:19.0: PCI INT A disabled
>e1000e 0000:00:19.0: PME# enabled
>ricoh-mmc: Suspending.
>ricoh-mmc: Controller is now re-enabled.
>ehci_hcd 0000:00:1d.7: PME# disabled
>ehci_hcd 0000:00:1a.7: PME# disabled
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Breaking affinity for irq 9
>Breaking affinity for irq 16
>Breaking affinity for irq 20
>Breaking affinity for irq 21
>Breaking affinity for irq 32
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching NULL sched-domain.
>CPU1 is down
>Extended CMOS year: 2000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Back to C!
>CPU0: Thermal LVT vector (0xfa) already installed
>Extended CMOS year: 2000
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5053.99 BogoMIPS (lpj=2526999)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>CPU1: Thermal monitoring enabled (TM1)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
>kvm: enabling virtualization on CPU1
>CPU0 attaching NULL sched-domain.
>Switched to high resolution mode on CPU 1
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>pcieport-driver 0000:00:01.0: restoring config space at offset 0xf (was 0x80100, writing 0x1a0100)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xeff1e001)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xf6e0f200)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0x7 (was 0x200000f0, writing 0xd0d0)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
>pcieport-driver 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xefe1)
>e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xf6fdb000)
>e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6fe0000)
>e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
>uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x6f61)
>uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x203)
>uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f81)
>uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x6fa1)
>uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
>ehci_hcd 0000:00:1a.7: PME# disabled
>HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xfebfc004, writing 0xf6fdc004)
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20200)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf1f0f1f0)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0xc0c00)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x20300)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0xd0d00)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x20400)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f001)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xf1e0f1c0)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0xc0c0)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0xf0e00)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x203)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f21)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6f41)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
>ehci_hcd 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x22802020)
>pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20030300, writing 0x20070300)
>pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
>ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x400, writing 0x40a)
>ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
>i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xf6fdaf04)
>i801_smbus 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103)
>nouveau 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
>nouveau 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xdf01)
>nouveau 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf2000004)
>nouveau 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
>nouveau 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf5000000)
>nouveau 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>nouveau 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>b43-pci-bridge 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>b43-pci-bridge 0000:0c:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1ffc004)
>b43-pci-bridge 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>b43-pci-bridge 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0xe (was 0x0, writing 0x24fc)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0xd (was 0x0, writing 0x2400)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0xc (was 0x0, writing 0x20fc)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0xb (was 0x0, writing 0x2000)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0xa (was 0x0, writing 0xf0bff000)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x9 (was 0x0, writing 0xf0800000)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x8 (was 0x0, writing 0xf07ff000)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0400000)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0070403)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1b00000)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a808)
>yenta_cardbus 0000:03:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
>firewire_ohci 0000:03:01.1: restoring config space at offset 0xf (was 0x4020200, writing 0x402020a)
>firewire_ohci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
>firewire_ohci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>sdhci-pci 0000:03:01.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>sdhci-pci 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xf1bff600)
>sdhci-pci 0000:03:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
>sdhci-pci 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>ricoh-mmc 0000:03:01.3: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>ricoh-mmc 0000:03:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xf1bff700)
>ricoh-mmc 0000:03:01.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
>ricoh-mmc 0000:03:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>ricoh-mmc: Resuming.
>ricoh-mmc: Controller is now disabled.
>e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: PME# disabled
>e1000e 0000:00:19.0: PME# disabled
>e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>usb usb4: root hub lost power or was reset
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: PME# disabled
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>usb usb6: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>usb usb7: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb8: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: PME# disabled
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>ahci 0000:00:1f.2: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: We're back, enabling device...
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: POSTing device...
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDB6B
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDF70
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE742
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE810
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAB9
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB1E
>[drm] nouveau 0000:01:00.0: 0xC522: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xCCA2: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xC9D6: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xCCA2: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xC9D6: parsing output script 0
>[drm] nouveau 0000:01:00.0: Reinitialising engines...
>[drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[drm] nouveau 0000:01:00.0: Restoring mode...
>[drm] LVDS-7: set mode 1440x900 1f
>b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[drm] nouveau 0000:01:00.0: 0xC526: parsing output script 1
>[drm] nouveau 0000:01:00.0: 0xC3D7: parsing clock script 0
>ata6: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>firewire_core: skipped bus generations, destroying all nodes
>sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[drm] nouveau 0000:01:00.0: 0xC51D: parsing clock script 1
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: configured for UDMA/100
>ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
>ata2: irq_stat 0x40000001
>ata2.00: configured for UDMA/100
>ata2: EH complete
>firewire_core: rediscovered device fw0
>sd 0:0:0:0: [sda] Starting disk
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>0000:00:19.0: eth0: 10/100 speed: disabling TSO
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
>ata1: irq_stat 0x00400040, connection status changed
>ata1.00: configured for UDMA/133
>ata1: EH complete
>usb 6-2: reset full speed USB device using uhci_hcd and address 2
>PM: Finishing wakeup.
>Restarting tasks ... done.
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>[drm] nouveau 0000:01:00.0: DCB I2C port type 6 unknown
>usb 5-1: USB disconnect, address 2
>usb 5-1: new full speed USB device using uhci_hcd and address 3
>usb 5-1: New USB device found, idVendor=0a5c, idProduct=5801
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-1: Product: 5880
>usb 5-1: Manufacturer: Broadcom Corp
>usb 5-1: SerialNumber: 0123456789ABCD
>usb 5-1: configuration #0 chosen from 1 choice
>usb 5-1: config 0 descriptor??
>usb 1-6: reset high speed USB device using ehci_hcd and address 3

Actions: View

Attachments on bug 25451: 31748

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.