Attachment 31752 Details for Bug 25453 – output of dmesg after resume

output of dmesg after resume

nyx_dmesg_output.log (text/plain), 82.01 KB, created by Tobias Hommel on 2009-12-04 12:34:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tobias Hommel

Created: 2009-12-04 12:34:27 UTC

Size: 82.01 KB

patch

obsolete

>Linux version 2.6.31-gentoo-r6-nyx (root@nyx) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #4 SMP PREEMPT Wed Dec 2 20:58:57 CET 2009
>Command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffd0000 (usable)
> BIOS-e820: 00000000cffd0000 - 00000000cffde000 (ACPI data)
> BIOS-e820: 00000000cffde000 - 00000000d0000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFC0000000 write-back
>  2 base 00C0000000 mask FFF0000000 write-back
>  3 base 0100000000 mask FFE0000000 write-back
>  4 base 0120000000 mask FFF0000000 write-back
>  5 base 00000DC000 mask 0FFFFFE000 write-back
>  6 disabled
>  7 disabled
>TOM2: 0000000130000000 aka 4864M
>------------[ cut here ]------------
>WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0xd1/0x136()
>Hardware name: MS-7310
>mtrr: your BIOS has set up an incorrect mask, fixing it up.
>Modules linked in:
>Pid: 0, comm: swapper Not tainted 2.6.31-gentoo-r6-nyx #4
>Call Trace:
> [<ffffffff81035fc5>] warn_slowpath_common+0x77/0x8f
> [<ffffffff8103602a>] warn_slowpath_fmt+0x3c/0x3e
> [<ffffffff81018453>] generic_get_mtrr+0xd1/0x136
> [<ffffffff814e2451>] mtrr_trim_uncached_memory+0x87/0x52d
> [<ffffffff814de526>] setup_arch+0x3c1/0x7cb
> [<ffffffff8133c1e0>] ? printk+0x3c/0x3e
> [<ffffffff810516a6>] ? clockevents_register_notifier+0x3e/0x48
> [<ffffffff814dc2fc>] start_kernel+0x7c/0x351
> [<ffffffff814dbc3c>] x86_64_start_reservations+0xac/0xb0
> [<ffffffff814dbd24>] x86_64_start_kernel+0xe4/0xeb
>---[ end trace 4eaa2a86a8e2da22 ]---
>e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcffd0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000cffd0000
> 0000000000 - 00cfe00000 page 2M
> 00cfe00000 - 00cffd0000 page 4k
>kernel direct mapping tables up to cffd0000 @ 10000-16000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ 14000-1a000
>ACPI: RSDP 00000000000f91a0 00014 (v00 ACPIAM)
>ACPI: RSDT 00000000cffd0000 00038 (v01 A M I  OEMRSDT  10000722 MSFT 00000097)
>ACPI: FACP 00000000cffd0200 00084 (v02 A M I  OEMFACP  10000722 MSFT 00000097)
>ACPI: DSDT 00000000cffd0440 04512 (v01  1ADJT 1ADJT007 00000007 INTL 20051117)
>ACPI: FACS 00000000cffde000 00040
>ACPI: APIC 00000000cffd0390 00070 (v01 A M I  OEMAPIC  10000722 MSFT 00000097)
>ACPI: MCFG 00000000cffd0400 0003C (v01 A M I  OEMMCFG  10000722 MSFT 00000097)
>ACPI: OEMB 00000000cffde040 00060 (v01 A M I  AMI_OEM  10000722 MSFT 00000097)
>ACPI: SSDT 00000000cffd4960 0030E (v01 A M I  POWERNOW 00000001 AMD  00000001)
>ACPI: Local APIC address 0xfee00000
>(7 early reservations) ==> bootmem [0000000000 - 0130000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00015a57f4]    TEXT DATA BSS ==> [0001000000 - 00015a57f4]
>  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #4 [00015a6000 - 00015a6180]              BRK ==> [00015a6000 - 00015a6180]
>  #5 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
>  #6 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000cffd0
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1048415
>  DMA zone: 56 pages used for memmap
>  DMA zone: 104 pages reserved
>  DMA zone: 3823 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833544 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 24 pages at ffff880028022000, static data 68000 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031287
>Kernel command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1
>Unknown boot option `nouveau.modeset=1': ignoring
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 20000000 size 32 MB
>Aperture pointing to e820 RAM. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>Memory: 4055576k/4980736k available (3347k kernel code, 787076k absent, 137272k reserved, 1554k data, 376k init)
>NR_IRQS:320
>Fast TSC calibration using PIT
>Detected 3015.277 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6030.55 BogoMIPS (lpj=3015277)
>Security Framework initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>ACPI: Core revision 20090521
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6029.84 BogoMIPS (lpj=3014921)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 5 MCE banks
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
>Brought up 2 CPUs
>Total of 2 processors activated (12060.39 BogoMIPS).
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>TOM: 00000000d0000000 aka 3328M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [f9ff0000, f9ffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, fe0bffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [d0000000, ffffffff]
>bus: 00 index 2 mmio: [f9ff0000, f9ffffff]
>bus: 00 index 3 mmio: [a0000, bffff]
>bus: 00 index 4 mmio: [130000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI Warning: Incorrect checksum in table [OEMB] - E9, should be E8 20090521 tbutils-246
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: Force enabled HPET at 0xfed00000
>pci 0000:00:01.1: reg 10 io port: [0xcc00-0xcc1f]
>pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f]
>pci 0000:00:01.1: reg 24 io port: [0x6000-0x603f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: reg 10 32bit mmio: [0xf9ffec00-0xf9ffecff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
>pci 0000:00:07.0: reg 10 io port: [0xc480-0xc487]
>pci 0000:00:07.0: reg 14 io port: [0xc400-0xc403]
>pci 0000:00:07.0: reg 18 io port: [0xc080-0xc087]
>pci 0000:00:07.0: reg 1c io port: [0xc000-0xc003]
>pci 0000:00:07.0: reg 20 io port: [0xbc00-0xbc0f]
>pci 0000:00:07.0: reg 24 32bit mmio: [0xf9ffd000-0xf9ffdfff]
>pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff]
>pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:01:09.0: reg 10 io port: [0xdc00-0xdc1f]
>pci 0000:01:09.0: supports D1 D2
>pci 0000:01:09.1: reg 10 io port: [0xd880-0xd887]
>pci 0000:01:09.1: supports D1 D2
>pci 0000:00:09.0: transparent bridge
>pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
>pci 0000:05:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
>pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:05:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
>pci 0000:05:00.0: reg 24 io port: [0xec00-0xec7f]
>pci 0000:05:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff]
>pci 0000:00:0e.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfebfffff]
>pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *6
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *3
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x4000-0x407f has been reserved
>system 00:06: ioport range 0x4080-0x40ff has been reserved
>system 00:06: ioport range 0x4400-0x447f has been reserved
>system 00:06: ioport range 0x4480-0x44ff has been reserved
>system 00:06: ioport range 0x4800-0x487f has been reserved
>system 00:06: ioport range 0x4880-0x48ff has been reserved
>system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
>system 00:06: iomem range 0xfefff000-0xfeffffff has been reserved
>system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: ioport range 0xa00-0xa0f has been reserved
>system 00:0a: ioport range 0xa10-0xa1f has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
>system 00:0c: iomem range 0xff780000-0xffffffff has been reserved
>pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:09.0:   IO window: 0xd000-0xdfff
>pci 0000:00:09.0:   MEM window: disabled
>pci 0000:00:09.0:   PREFETCH window: disabled
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: disabled
>pci 0000:00:0b.0:   MEM window: disabled
>pci 0000:00:0b.0:   PREFETCH window: disabled
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: disabled
>pci 0000:00:0c.0:   MEM window: disabled
>pci 0000:00:0c.0:   PREFETCH window: disabled
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: disabled
>pci 0000:00:0d.0:   MEM window: disabled
>pci 0000:00:0d.0:   PREFETCH window: disabled
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0e.0:   IO window: 0xe000-0xefff
>pci 0000:00:0e.0:   MEM window: 0xfa000000-0xfebfffff
>pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfebfffff]
>pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1259789484.170:1): initialized
>msgmni has been set to 7922
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Linking AER extended capability
>pci 0000:05:00.0: Boot video device
>pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:0d.0: setting latency timer to 64
>pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:0e.0: setting latency timer to 64
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Uniform Multi-Platform E-IDE driver
>amd74xx 0000:00:06.0: UDMA133 controller
>amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf3)
>amd74xx 0000:00:06.0: IDE port disabled
>amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7
>Probing IDE interface ide0...
>hda: ST3250824A, ATA DISK drive
>hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdb: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-gd driver 1.18
>hda: max request size: 512KiB
>hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
>hda: cache flushes supported
> hda: hda1 hda2 < hda5 hda6 >
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 23
>ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 23
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Advanced Linux Sound Architecture Driver Version 1.0.20.
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>ALSA device list:
>  #0: SB Live! 5.1 Dell OEM [SB0228] (rev.10, serial:0x80661102) at 0xdc00, irq 19
>TCP cubic registered
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>registered taskstats version 1
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 1:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with writeback data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 376k freed
>udev: starting version 147
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xd880, speed 1202kHz
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
>forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:0a.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ide-cd driver 5.00
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
>nvidiafb 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nvidiafb: Device ID: 10de0641 
>nvidiafb: unknown NV_ARCH
>ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:70:8b:50
>forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 21, io mem 0xf9ffec00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9fff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>nvidia: module license 'NVIDIA' taints kernel.
>Disabling lock debugging due to kernel taint
>usb 2-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input1
>generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nvidia 0000:05:00.0: setting latency timer to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
>[drm] Initialized drm 1.1.0 20060810
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x8
>powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xc
>powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xe
>powernow-k8:    4 : fid 0xe (2200 MHz), vid 0x10
>powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa0ae8e40
>vboxdrv: fAsync=1 offMin=0x14140 offMax=0x14140
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
>VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0c85a20
>VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0c9e5e0
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>REISERFS (device sda5): found reiserfs format "3.6" with standard journal
>REISERFS (device sda5): using ordered data mode
>REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda5): checking transaction log (sda5)
>REISERFS (device sda5): Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>fuse init (API version 7.12)
>Adding 1959920k swap on /dev/sda2.  Priority:-1 extents:1 across:1959920k 
>NET: Registered protocol family 10
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>w83627ehf: Found W83627EHG chip at 0xa10
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>Clocksource tsc unstable (delta = -114894004 ns)
>ACPI: 'PS2M' and 'PS2K' have the same GPE, can't disable/enable one seperately
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>[drm] Module unloaded
>[drm] Initialized drm 1.1.0 20060810
>[drm] Module unloaded
>nvidiafb: Device ID: 10de0641 
>nvidiafb: unknown NV_ARCH
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x096080c1)
>[drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:05:00.0: ... appears to be valid
>[drm] nouveau 0000:05:00.0: BIT BIOS found
>[drm] nouveau 0000:05:00.0: Bios version 62.94.28.00
>[drm] nouveau 0000:05:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:05:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:05:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
>[drm] nouveau 0000:05:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
>[drm] nouveau 0000:05:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
>[drm] nouveau 0000:05:00.0:   3: 0x00000211: type 0x11 idx 2 tag 0xff
>[drm] nouveau 0000:05:00.0:   4: 0x00000213: type 0x13 idx 2 tag 0xff
>[drm] nouveau 0000:05:00.0: Raw DCB entry 0: 02000300 00000028
>[drm] nouveau 0000:05:00.0: Raw DCB entry 1: 01000302 00020030
>[drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04011310 00000028
>[drm] nouveau 0000:05:00.0: Raw DCB entry 3: 02011312 00020030
>[drm] nouveau 0000:05:00.0: Raw DCB entry 4: 010223f1 00c0c080
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[TTM] Zone  kernel: Available graphics memory: 2028382 kiB.
>[drm] nouveau 0000:05:00.0: 512 MiB VRAM
>[drm] nouveau 0000:05:00.0: 512 MiB GART (aperture)
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:05:00.0: Detected a DAC output
>[drm] nouveau 0000:05:00.0: Detected a TMDS output
>[drm] nouveau 0000:05:00.0: Detected a DAC output
>[drm] nouveau 0000:05:00.0: Detected a TMDS output
>[drm] nouveau 0000:05:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:05:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:05:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:05:00.0: allocated 1680x1050 fb: 0x40250000, bo ffff88012a018000
>[drm] TMDS-8: set mode 1680x1050 25
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>Console: switching to colour frame buffer device 210x131
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.15 91f44d691472ce505bec75cc26e3b185b1556cc7 for 0000:05:00.0 on minor 0
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2
>[drm] nouveau 0000:05:00.0: PGRAPH_ERROR - nSource: PROTECTION_ERROR DMA_R_PROTECTION, nStatus:
>[drm] nouveau 0000:05:00.0: PGRAPH_ERROR - Ch 2/4 Class 0x8297 Mthd 0x15e0 Data 0x00000000:0x00000000
>[drm] nouveau 0000:05:00.0: magic set 1:
>[drm] nouveau 0000:05:00.0: 	0x00408900: 0x80000000
>[drm] nouveau 0000:05:00.0: 	0x00408904: 0xd87b3f69
>[drm] nouveau 0000:05:00.0: 	0x00408908: 0x7bf38fee
>[drm] nouveau 0000:05:00.0: 	0x0040890c: 0x0000f58a
>[drm] nouveau 0000:05:00.0: 	0x00408910: 0xfff436eb
>[drm] nouveau 0000:05:00.0: 	0x00408e08: 0x80000000
>[drm] nouveau 0000:05:00.0: 	0x00408e0c: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00408e10: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00408e14: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00408e18: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00408e1c: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00408e20: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00408e24: 0x00000000
>[drm] nouveau 0000:05:00.0: magic set 2:
>[drm] nouveau 0000:05:00.0: 	0x00409900: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409904: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409908: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x0040990c: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409910: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e08: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e0c: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e10: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e14: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e18: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e1c: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e20: 0x00000000
>[drm] nouveau 0000:05:00.0: 	0x00409e24: 0x00000000
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 3
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 3
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>hdb: command error: status=0x51 { DriveReady SeekComplete Error }
>hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>hdb: possibly failed opcode: 0xa0
>end_request: I/O error, dev hdb, sector 237072
>Buffer I/O error on device hdb, logical block 29634
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.03 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 1:0:0:0: [sda] Synchronizing SCSI cache
>sd 1:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>[drm] nouveau 0000:05:00.0: And we're gone!
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>forcedeth 0000:00:0a.0: PCI INT A disabled
>sata_nv 0000:00:07.0: PCI INT A disabled
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ehci_hcd 0000:00:02.1: PME# disabled
>ohci_hcd 0000:00:02.0: PME# disabled
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>nForce2_smbus 0000:00:01.1: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73101462)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ohci_hcd 0000:00:02.0: PME# disabled
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>ehci_hcd 0000:00:02.1: PME# disabled
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport-driver 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport-driver 0000:00:0b.0: Linking AER extended capability
>pcieport-driver 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport-driver 0000:00:0c.0: Linking AER extended capability
>pcieport-driver 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport-driver 0000:00:0d.0: Linking AER extended capability
>pcieport-driver 0000:00:0e.0: restoring config space at offset 0x7 (was 0x2000e1e1, writing 0xe1e1)
>pcieport-driver 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport-driver 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>nForce2_smbus 0000:00:01.1: PME# disabled
>ohci_hcd 0000:00:02.0: PME# disabled
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PME# disabled
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>AMD_IDE 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>eth0: no link during initialization.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>Emu10k1_gameport 0000:01:09.1: PME# disabled
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] TMDS-8: set mode 1680x1050 25
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>serial 00:05: activated
>ata1: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdb: UDMA/33 mode selected
>sd 1:0:0:0: [sda] Starting disk
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
>ata2.00: ACPI cmd f5/00:00:00:00:00:00 filtered out
>ata2.00: configured for UDMA/133
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:00:00:00/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 9551683
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>Restarting tasks ... done.
>SMP alternatives: switching to SMP code
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>Booting processor 1 APIC 0x1 ip 0x6000
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 9551691
>ata2: EH complete
>Aborting journal on device sda3.
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>EXT3-fs error (device sda3) in ext3_reserve_inode_write: Journal has aborted
>Initializing CPU#1
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>Calibrating delay using timer specific routine.. 6000.22 BogoMIPS (lpj=3000111)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 5 MCE banks
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 9541435
>Buffer I/O error on device sda3, logical block 688640
>lost page write due to I/O error on sda3
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>Switched to high resolution mode on CPU 1
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>usbcore: registered new interface driver hiddev
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes
>ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes
>generic-usb: probe of 0003:046D:C00C.0002 failed with error -32
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ext3_abort called.
>EXT3-fs error (device sda3): ext3_journal_start_sb: Detected aborted journal
>Remounting filesystem read-only
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 4032315
>Buffer I/O error on device sda3, logical block 0
>lost page write due to I/O error on sda3
>ata2: EH complete
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:1a:8b:a3/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 15780788
>Buffer I/O error on device sda5, logical block 2620
>lost page write due to I/O error on sda5
>Buffer I/O error on device sda5, logical block 2621
>lost page write due to I/O error on sda5
>ata2: EH complete
>REISERFS abort (device sda5): Journal write error in flush_commit_list
>AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 32 bytes
>AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 32 bytes
>AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 8625075
>Buffer I/O error on device sda3, logical block 574095
>lost page write due to I/O error on sda3
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 8637979
>Buffer I/O error on device sda3, logical block 575708
>lost page write due to I/O error on sda3
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 8672747
>Buffer I/O error on device sda3, logical block 580054
>lost page write due to I/O error on sda3
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 113455604
>Aborting journal on device sda6.
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in
>         res 50/00:00:49:1f:c0/00:00:00:00:00/ed Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 9341363
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in
>         res 50/00:00:ba:89:8e/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 9341411
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in
>         res 50/00:00:1a:8a:8e/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in
>         res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error)
>ata2.00: status: { DRDY }
>ata2.00: configured for UDMA/133
>sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        0a 38 60 2f 
>sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>end_request: I/O error, dev sda, sector 9341467
>ata2: EH complete
>Hangcheck: hangcheck value past margin!
>ext3_abort called.
>EXT3-fs error (device sda6): ext3_journal_start_sb: Detected aborted journal
>Remounting filesystem read-only
>[drm] nouveau 0000:05:00.0: nouveau_channel_free: freeing fifo 3
>------------[ cut here ]------------
>WARNING: at fs/notify/inotify/inotify_fsnotify.c:129 idr_callback+0x3e/0x62()
>Hardware name: MS-7310
>inotify closing but id=0 for entry=ffff880113731a58 in group=ffff88012e93a0c0 still in idr.  Probably leaking memory
>Modules linked in: k8temp w83627ehf i2c_nforce2 usbhid nouveau ttm drm_kms_helper drm nvidiafb cfbcopyarea vgastate cfbimgblt cfbfillrect xt_tcpudp iptable_filter ipt_addrtype xt_dscp xt_string xt_multiport xt_mark xt_hashlimit xt_conntrack xt_connmark xt_NFQUEUE xt_MARK xt_CONNMARK nf_conntrack ip_tables x_tables cpufreq_ondemand nfsd exportfs hwmon_vid ipv6 fuse nls_iso8859_1 nls_cp437 vboxnetadp vboxnetflt vboxdrv powernow_k8 freq_table ohci_hcd ide_cd_mod ehci_hcd forcedeth cdrom emu10k1_gp usbcore gameport processor thermal [last unloaded: i2c_nforce2]
>Pid: 4365, comm: gam_server Tainted: P        W  2.6.31-gentoo-r6-nyx #4
>Call Trace:
> [<ffffffff81035fc5>] warn_slowpath_common+0x77/0x8f
> [<ffffffff8103602a>] warn_slowpath_fmt+0x3c/0x3e
> [<ffffffff8133c57e>] ? wait_for_common+0x118/0x133
> [<ffffffff810bdcd7>] idr_callback+0x3e/0x62
> [<ffffffff81196ad5>] idr_for_each+0x69/0xad
> [<ffffffff810bdc99>] ? idr_callback+0x0/0x62
> [<ffffffff810bbe91>] ? fsnotify_put_event+0x51/0x55
> [<ffffffff810bdc85>] inotify_free_group_priv+0x22/0x36
> [<ffffffff810bbfb7>] fsnotify_final_destroy_group+0x23/0x2f
> [<ffffffff810bc09c>] fsnotify_put_group+0x8c/0x90
> [<ffffffff810bde91>] inotify_release+0x25/0x32
> [<ffffffff81094e48>] __fput+0xf9/0x1b8
> [<ffffffff81094f1c>] fput+0x15/0x17
> [<ffffffff81092081>] filp_close+0x63/0x6d
> [<ffffffff810378dd>] put_files_struct+0x65/0xb3
> [<ffffffff81037971>] exit_files+0x46/0x4f
> [<ffffffff81039111>] do_exit+0x1a9/0x622
> [<ffffffff8104c063>] ? up_read+0x9/0xb
> [<ffffffff81340fd1>] ? do_page_fault+0x2c7/0x2f4
> [<ffffffff810395fd>] do_group_exit+0x73/0xa0
> [<ffffffff8103963c>] sys_exit_group+0x12/0x16
> [<ffffffff8100aeab>] system_call_fastpath+0x16/0x1b
>---[ end trace 4eaa2a86a8e2da24 ]---
>entry->group=(null) inode=(null) wd=4096

Actions: View

Attachments on bug 25453: 31752 | 36036

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.