Attachment 31821 Details for Bug 25489 – dmesg log

dmesg log

dmsg.log (text/plain), 73.37 KB, created by dagg on 2009-12-07 11:41:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: dagg

Created: 2009-12-07 11:41:55 UTC

Size: 73.37 KB

patch

obsolete

>Linux version 2.6.29-tuxonice-r3 (root@NCC-5001-D) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #3 SMP Thu Jul 9 16:35:01 IDT 2009
>Command line: root=/dev/sda10 irqpoll resume=file:/dev/sda7:0x444100
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe5c800 (usable)
> BIOS-e820: 000000007fe5c800 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x7fe5c max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-000000007fe5c000
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fe5c000 page 4k
>kernel direct mapping tables up to 7fe5c000 @ 8000-c000
>last_map_addr: 7fe5c000 end: 7fe5c000
>ACPI: RSDP 000FBAF0, 0024 (r2 DELL  )
>ACPI: XSDT 7FE5E200, 0064 (r1 DELL    M09     27D80C04 ASL        61)
>ACPI: FACP 7FE5E09C, 00F4 (r4 DELL    M09     27D80C04 ASL        61)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 7FE5E800, 521C (r2 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7FE6D000, 0040
>ACPI: HPET 7FE5E300, 0038 (r1 DELL    M09            1 ASL        61)
>ACPI: APIC 7FE5E400, 0068 (r1 DELL    M09     27D80C04 ASL        47)
>ACPI: MCFG 7FE5E3C0, 003E (r16 DELL    M09     27D80C04 ASL        61)
>ACPI: SLIC 7FE5E49C, 0176 (r1 DELL    M09     27D80C04 ASL        61)
>ACPI: OSFR 7FE5DA00, 0086 (r1 DELL    M09     27D80C04 ASL        61)
>ACPI: BOOT 7FE5DFC0, 0028 (r1 DELL    M09     27D80C04 ASL        61)
>ACPI: SSDT 7FE5C9FA, 04D4 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>(5 early reservations) ==> bootmem [0000000000 - 007fe5c000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 000088af6c]    TEXT DATA BSS ==> [0000200000 - 000088af6c]
>  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #4 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fe5c
>On node 0 totalpages: 523771
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1776 pages reserved
>  DMA zone: 2167 pages, LIFO batch:0
>  DMA32 zone: 7107 pages used for memmap
>  DMA32 zone: 512665 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
>NR_CPUS:3 nr_cpumask_bits:3 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 45056 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 514832
>Kernel command line: root=/dev/sda10 irqpoll resume=file:/dev/sda7:0x444100
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2094.837 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 2055724k/2095472k available (3455k kernel code, 388k absent, 38940k reserved, 1987k data, 364k init)
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.24 BogoMIPS (lpj=6982790)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4191.56 BogoMIPS (lpj=6983311)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>CPU1: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (8383.81 BogoMIPS).
>net_namespace: 976 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG at f8000000 - fbffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 7FE6D080, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
>pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
>pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
>pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 003f)
>pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
>pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
>pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
>pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
>pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6eaf]
>pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffbf00-0xf6ffbfff]
>pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
>pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 14 io port: [0xde00-0xdeff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xf6df0000-0xf6dfffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 32bit mmio: [0xf6dec000-0xf6deffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xf6d00000-0xf6efffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:0c:00.0: reg 10 64bit mmio: [0xf6cfc000-0xf6cfffff]
>pci 0000:0c:00.0: supports D1 D2
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf6c00000-0xf6cfffff]
>pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf6a00000-0xf6bfffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
>pci 0000:09:00.0: reg 10 64bit mmio: [0xf69f0000-0xf69fffff]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:00:1c.5: bridge 32bit mmio: [0xf6900000-0xf69fffff]
>pci 0000:03:01.0: reg 10 32bit mmio: [0xf68ff800-0xf68fffff]
>pci 0000:03:01.0: supports D1 D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>pci 0000:03:01.1: reg 10 32bit mmio: [0xf68ff400-0xf68ff4ff]
>pci 0000:03:01.1: supports D1 D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>pci 0000:03:01.2: reg 10 32bit mmio: [0xf68ff500-0xf68ff5ff]
>pci 0000:03:01.2: supports D1 D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>pci 0000:03:01.3: reg 10 32bit mmio: [0xf68ff600-0xf68ff6ff]
>pci 0000:03:01.3: supports D1 D2
>pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.3: PME# disabled
>pci 0000:03:01.4: reg 10 32bit mmio: [0xf68ff700-0xf68ff7ff]
>pci 0000:03:01.4: supports D1 D2
>pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.4: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf6800000-0xf68fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *4
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:06: ioport range 0xc80-0xcff could not be reserved
>system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:0a: ioport range 0x900-0x97f has been reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0b: ioport range 0xf400-0xf4fe has been reserved
>system 00:0b: ioport range 0x1080-0x10bf has been reserved
>system 00:0b: ioport range 0x10c0-0x10df has been reserved
>system 00:0b: ioport range 0x809-0x809 has been reserved
>system 00:0c: iomem range 0x0-0x9efff could not be reserved
>system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff has been reserved
>system 00:0c: iomem range 0x100000-0x7fe5c7ff could not be reserved
>system 00:0c: iomem range 0x7fe5c800-0x7fefffff has been reserved
>system 00:0c: iomem range 0x7ff00000-0x7fffffff has been reserved
>system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
>system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
>system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
>system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
>system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
>system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xd000-0xdfff
>pci 0000:00:01.0:   MEM window: 0xf6d00000-0xf6efffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0xf6c00000-0xf6cfffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.3:   MEM window: 0xf6a00000-0xf6bfffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
>pci 0000:00:1c.5:   IO window: disabled
>pci 0000:00:1c.5:   MEM window: 0xf6900000-0xf69fffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xf6800000-0xf68fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>  alloc irq_desc for 16 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 17 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 19 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:01: resource 1 mem: [0xf6d00000-0xf6efffff]
>pci_bus 0000:01: resource 2 mem: [0xe0000000-0xefffffff]
>pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 0 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 1 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 2 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 1 mem: [0xf6c00000-0xf6cfffff]
>pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0d: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:0d: resource 1 mem: [0xf6a00000-0xf6bfffff]
>pci_bus 0000:0d: resource 2 mem: [0xf0000000-0xf01fffff]
>pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
>pci_bus 0000:09: resource 0 mem: [0x0-0x0]
>pci_bus 0000:09: resource 1 mem: [0xf6900000-0xf69fffff]
>pci_bus 0000:09: resource 2 mem: [0x0-0x0]
>pci_bus 0000:09: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 mem: [0x0-0x0]
>pci_bus 0000:03: resource 1 mem: [0xf6800000-0xf68fffff]
>pci_bus 0000:03: resource 2 mem: [0x0-0x0]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x79 set to 0x1
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NTFS driver 2.1.29 [Flags: R/W].
>fuse init (API version 7.11)
>msgmni has been set to 4015
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>  alloc irq_desc for 24 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 25 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 26 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>  alloc irq_desc for 27 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>  alloc irq_desc for 28 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: can't get bus number, assuming 0
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1] registered
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>fakephp: Fake PCI Hot Plug Controller Driver
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /class/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input1
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input2
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: SSDT 7FE5D538, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE5CECE, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FE5D77C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE5D4B3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (35 C)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>brd: module loaded
>loop: module loaded
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>console [netcon0] enabled
>netconsole: network logging started
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 17
>ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 17
>ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
>ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.01: SATA link down (SStatus 0 SControl 0)
>ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633A, D300, max UDMA/100
>ata2.00: applying bridge limits
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-T633A D300 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  alloc irq_desc for 22 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>  alloc irq_desc for 20 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>  alloc irq_desc for 21 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>I2O subsystem v1.325
>i2o: max drivers = 8
>cpuidle: using governor ladder
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
>Marking TSC unstable due to TSC halts in idle
>  alloc irq_desc for 18 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
>input: AT Translated Set 2 keyboard as /class/input/input3
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12)
>ricoh-mmc: Controller is now disabled.
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>oprofile: using NMI interrupt.
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>TuxOnIce 3.0.1 (http://tuxonice.net)
>Replacing swsusp.
>TuxOnIce FileAllocator: Testing whether you can resume:
>usb 2-5: new high speed USB device using ehci_hcd and address 3
>input: PS/2 Mouse as /class/input/input4
>Clocksource tsc unstable (delta = -281424332 ns)
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
>usb 2-5: configuration #1 chosen from 1 choice
>TuxOnIce: FileAllocator: File signature found.
>Resuming enabled.
>ReiserFS: sda10: found reiserfs format "3.6" with standard journal
>ReiserFS: sda10: using ordered data mode
>ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda10: checking transaction log (sda10)
>ReiserFS: sda10: Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly on device 8:10.
>Freeing unused kernel memory: 364k freed
>usb 6-2: new low speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>input: USB_PS2 Optical Mouse as /class/input/input6
>generic-usb 0003:15CA:00C3.0001: input: USB HID v1.10 Mouse [USB_PS2 Optical Mouse] on usb-0000:00:1d.1-2/input0
>udev: starting version 141
>udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
>input: PC Speaker as /class/input/input7
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>tg3.c:v3.97 (December 10, 2008)
>tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:09:00.0: setting latency timer to 64
>tg3 0000:09:00.0: PME# disabled
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0)
>input: Integrated Webcam as /class/input/input8
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>ohci1394 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f68ff800-f68fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:21:70:7c:e0:25
>eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f1c00
>input: HDA Digital PCBeep as /class/input/input9
>input: HDA Intel Mic at Ext Left Jack as /class/input/input10
>input: HDA Intel HP Out at Ext Left Jack as /class/input/input11
>input: HDA Intel HP Out at Ext Left Jack as /class/input/input12
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: setting latency timer to 64
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc000126bec70]
>usbcore: registered new interface driver snd-usb-audio
>[drm] Initialized drm 1.1.0 20060810
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] Initialized radeon 1.29.0 20080613 on minor 0
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
>ReiserFS: sda8: using ordered data mode
>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda8: checking transaction log (sda8)
>ReiserFS: sda8: Using r5 hash to sort names
>ReiserFS: sda9: found reiserfs format "3.6" with standard journal
>ReiserFS: sda9: using ordered data mode
>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda9: checking transaction log (sda9)
>ReiserFS: sda9: Using r5 hash to sort names
>Adding 1959888k swap on /dev/sda6.  Priority:-1 extents:1 across:1959888k 
>tg3 0000:09:00.0: PME# disabled
>  alloc irq_desc for 29 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>tg3 0000:09:00.0: irq 29 for MSI/MSI-X
>ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
>ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver
>ndiswrapper: driver bcmwl5 (Broadcom,03/21/2008, 4.170.77.3) loaded
>ndiswrapper 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ndiswrapper 0000:0c:00.0: setting latency timer to 64
>ndiswrapper: using IRQ 17
>wlan0 (ndiswrapper): not using net_device_ops yet
>wlan0: ethernet device 00:22:68:db:d9:6e using NDIS driver: bcmwl5, version: 0x4aa4d03, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4315.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>usbcore: registered new interface driver ndiswrapper
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>[drm] Setting GART location based on new memory map
>[drm] Loading RV620 Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 2 usecs
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known.
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>Linux version 2.6.32-gentoo (root@NCC-5001-D) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #1 SMP PREEMPT Mon Dec 7 17:16:28 IST 2009
>Command line: root=/dev/sda5
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe5c800 (usable)
> BIOS-e820: 000000007fe5c800 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x7fe5c max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07FF00000 mask FFFF00000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-000000007fe5c000
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fe5c000 page 4k
>kernel direct mapping tables up to 7fe5c000 @ 8000-c000
>ACPI: RSDP 00000000000fbaf0 00024 (v02 DELL  )
>ACPI: XSDT 000000007fe5e200 00064 (v01 DELL    M09     27D80C04 ASL  00000061)
>ACPI: FACP 000000007fe5e09c 000F4 (v04 DELL    M09     27D80C04 ASL  00000061)
>ACPI: DSDT 000000007fe5e800 0521C (v02 INT430 SYSFexxx 00001001 INTL 20050624)
>ACPI: FACS 000000007fe6d000 00040
>ACPI: HPET 000000007fe5e300 00038 (v01 DELL    M09     00000001 ASL  00000061)
>ACPI: APIC 000000007fe5e400 00068 (v01 DELL    M09     27D80C04 ASL  00000047)
>ACPI: MCFG 000000007fe5e3c0 0003E (v16 DELL    M09     27D80C04 ASL  00000061)
>ACPI: SLIC 000000007fe5e49c 00176 (v01 DELL    M09     27D80C04 ASL  00000061)
>ACPI: OSFR 000000007fe5da00 00086 (v01 DELL    M09     27D80C04 ASL  00000061)
>ACPI: BOOT 000000007fe5dfc0 00028 (v01 DELL    M09     27D80C04 ASL  00000061)
>ACPI: SSDT 000000007fe5c9fa 004D4 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>(6 early reservations) ==> bootmem [0000000000 - 007fe5c000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00018aeab0]    TEXT DATA BSS ==> [0001000000 - 00018aeab0]
>  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #4 [00018af000 - 00018af1e8]              BRK ==> [00018af000 - 00018af1e8]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fe5c
>On node 0 totalpages: 523771
>  DMA zone: 56 pages used for memmap
>  DMA zone: 102 pages reserved
>  DMA zone: 3841 pages, LIFO batch:0
>  DMA32 zone: 7107 pages used for memmap
>  DMA32 zone: 512665 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s73944 r8192 d24360 u1048576
>pcpu-alloc: s73944 r8192 d24360 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516506
>Kernel command line: root=/dev/sda5
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Memory: 2053456k/2095472k available (4993k kernel code, 388k absent, 41004k reserved, 2659k data, 416k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 2094.584 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.16 BogoMIPS (lpj=2094584)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20090903
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4189.27 BogoMIPS (lpj=2094638)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>CPU1: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (8378.44 BogoMIPS).
>khelper used greatest stack depth: 6704 bytes left
>khelper used greatest stack depth: 5992 bytes left
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG at f8000000 - fbffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 000000007fe6d080 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
>pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
>pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
>pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 003f)
>pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
>pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
>pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
>pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
>pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff]
>pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
>pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 14 io port: [0xee00-0xeeff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xf6df0000-0xf6dfffff]
>pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 32bit mmio: [0xf6dec000-0xf6deffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xf6d00000-0xf6efffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:0c:00.0: reg 10 64bit mmio: [0xf6cfc000-0xf6cfffff]
>pci 0000:0c:00.0: supports D1 D2
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf6c00000-0xf6cfffff]
>pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf6a00000-0xf6bfffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
>pci 0000:09:00.0: reg 10 64bit mmio: [0xf69f0000-0xf69fffff]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:00:1c.5: bridge 32bit mmio: [0xf6900000-0xf69fffff]
>pci 0000:03:01.0: reg 10 32bit mmio: [0xf68ff800-0xf68fffff]
>pci 0000:03:01.0: supports D1 D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>pci 0000:03:01.1: reg 10 32bit mmio: [0xf68ff400-0xf68ff4ff]
>pci 0000:03:01.1: supports D1 D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>pci 0000:03:01.2: reg 10 32bit mmio: [0xf68ff500-0xf68ff5ff]
>pci 0000:03:01.2: supports D1 D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>pci 0000:03:01.3: reg 10 32bit mmio: [0xf68ff600-0xf68ff6ff]
>pci 0000:03:01.3: supports D1 D2
>pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.3: PME# disabled
>pci 0000:03:01.4: reg 10 32bit mmio: [0xf68ff700-0xf68ff7ff]
>pci 0000:03:01.4: supports D1 D2
>pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.4: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf6800000-0xf68fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *4
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: WMI: Mapper loaded
>PCI: Using ACPI for IRQ routing
>cfg80211: Calling CRDA to update world regulatory domain
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:06: ioport range 0xc80-0xcff could not be reserved
>system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:0a: ioport range 0x900-0x97f has been reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0b: ioport range 0xf400-0xf4fe has been reserved
>system 00:0b: ioport range 0x1080-0x10bf has been reserved
>system 00:0b: ioport range 0x10c0-0x10df has been reserved
>system 00:0b: ioport range 0x809-0x809 has been reserved
>system 00:0c: iomem range 0x0-0x9efff could not be reserved
>system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff has been reserved
>system 00:0c: iomem range 0x100000-0x7fe5c7ff could not be reserved
>system 00:0c: iomem range 0x7fe5c800-0x7fefffff has been reserved
>system 00:0c: iomem range 0x7ff00000-0x7fffffff has been reserved
>system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
>system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
>system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
>system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
>system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
>system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xe000-0xefff
>pci 0000:00:01.0:   MEM window: 0xf6d00000-0xf6efffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.1:   MEM window: 0xf6c00000-0xf6cfffff
>pci 0000:00:1c.1:   PREFETCH window: 0x00000080400000-0x000000805fffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.3:   MEM window: 0xf6a00000-0xf6bfffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
>pci 0000:00:1c.5:   IO window: 0x4000-0x4fff
>pci 0000:00:1c.5:   MEM window: 0xf6900000-0xf69fffff
>pci 0000:00:1c.5:   PREFETCH window: 0x00000080600000-0x000000807fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xf6800000-0xf68fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:01: resource 1 mem: [0xf6d00000-0xf6efffff]
>pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
>pci_bus 0000:0b: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff]
>pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff]
>pci_bus 0000:0c: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:0c: resource 1 mem: [0xf6c00000-0xf6cfffff]
>pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff]
>pci_bus 0000:0d: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:0d: resource 1 mem: [0xf6a00000-0xf6bfffff]
>pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff]
>pci_bus 0000:09: resource 0 io:  [0x4000-0x4fff]
>pci_bus 0000:09: resource 1 mem: [0xf6900000-0xf69fffff]
>pci_bus 0000:09: resource 2 pref mem [0x80600000-0x807fffff]
>pci_bus 0000:03: resource 1 mem: [0xf6800000-0xf68fffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:01:00.0: Boot video device
>Simple Boot Flag at 0x79 set to 0x1
>microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
>microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Intel AES-NI instructions are not detected.
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>NTFS driver 2.1.29 [Flags: R/W].
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>msgmni has been set to 4011
>alg: No test for fcrypt (fcrypt-generic)
>alg: No test for stdrng (krng)
>alg: No test for ghash (ghash-generic)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>Linux agpgart interface v0.103
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SBTN]
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input3
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: SSDT 000000007fe5d538 00244 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007fe5cece 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>processor LNXCPU:00: registered as cooling_device0
>ACPI: SSDT 000000007fe5d77c 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007fe5d4b3 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>processor LNXCPU:01: registered as cooling_device1
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (55 C)
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ACPI: Battery Slot [BAT0] (battery present)
>ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 29
>ata2: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb980 irq 29
>ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 29
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>Driver 'rtc_cmos' needs updating - please use bus_type methods
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i2c /dev entries driver
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
>sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12)
>ricoh-mmc: Controller is now disabled.
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>input: Dell WMI hotkeys as /devices/virtual/input/input5
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>ALSA device list:
>  No soundcards found.
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 17
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633A, D600, max UDMA/100
>ata2.00: applying bridge limits
>ata2.00: configured for UDMA/100
>ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
>ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-T633A D600 PQ: 0 ANSI: 5
> sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
> sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
>usb 2-5: new high speed USB device using ehci_hcd and address 3
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
>REISERFS (device sda5): found reiserfs format "3.6" with standard journal
>REISERFS (device sda5): using ordered data mode
>REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda5): checking transaction log (sda5)
>usb 2-5: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>usb 6-2: new low speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>input: USB_PS2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input8
>generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB_PS2 Optical Mouse] on usb-0000:00:1d.1-2/input0
>async/0 used greatest stack depth: 5560 bytes left
>async/1 used greatest stack depth: 5360 bytes left
>usb 3-1.1: new full speed USB device using uhci_hcd and address 3
>usb 3-1.1: configuration #1 chosen from 1 choice
>input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input9
>generic-usb 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
>usb 3-1.2: new full speed USB device using uhci_hcd and address 4
>usb 3-1.2: configuration #1 chosen from 1 choice
>input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input10
>generic-usb 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
>REISERFS (device sda5): replayed 97 transactions in 14 seconds
>REISERFS (device sda5): Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly on device 8:5.
>Freeing unused kernel memory: 416k freed
>consoletype used greatest stack depth: 5032 bytes left
>stty used greatest stack depth: 4408 bytes left
>grep used greatest stack depth: 4368 bytes left
>udev: starting version 141
>iTCO_vendor_support: vendor-support=0
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[drm] Initialized drm 1.1.0 20060810
>tg3.c:v3.102 (September 1, 2009)
>tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:09:00.0: setting latency timer to 64
>eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:21:70:7f:aa:b2
>eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ohci1394 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f68ff800-f68fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xF6DF0000
>[drm] register mmio size: 65536
>ATOM BIOS: Dell_HepburnFM6
>[drm] Clocks initialized !
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 64bits DDR
>[TTM] Zone  kernel: Available graphics memory: 1027248 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Loading RV620 CP Microcode
>platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0)
>input: Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input11
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>platform radeon_cp.0: firmware: requesting radeon/RV620_me.bin
>usb 3-1.3: new full speed USB device using uhci_hcd and address 5
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc000126bec70]
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_KLDSCP_LVTMA
>[drm] Connector 2:
>[drm]   HDMI-A
>[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>usb 3-1.3: configuration #1 chosen from 1 choice
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>[drm] fb mappable at 0xE0141000
>[drm] vram apper at 0xE0000000
>[drm] size 5299200
>[drm] fb depth is 24
>[drm]    pitch is 5888
>executing set pll
>executing set crtc timing
>[drm] LVDS-11: set mode 1440x900 1b
>wl: module license 'MIXED/Proprietary' taints kernel.
>Disabling lock debugging due to kernel taint
>wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>wl 0000:0c:00.0: setting latency timer to 64
>udev: renamed network interface eth1 to wlan0
>lib80211_crypt: registered algorithm 'TKIP'
>wlan0: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
>Console: switching to colour frame buffer device 180x56
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: setting latency timer to 64
>modprobe used greatest stack depth: 4168 bytes left
>mount used greatest stack depth: 4024 bytes left
>usbcore: registered new interface driver snd-usb-audio
>REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-1): using ordered data mode
>REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-1): checking transaction log (dm-1)
>REISERFS (device dm-1): replayed 602 transactions in 4 seconds
>REISERFS (device dm-1): Using r5 hash to sort names
>REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-2): using ordered data mode
>REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-2): checking transaction log (dm-2)
>REISERFS (device dm-2): replayed 218 transactions in 11 seconds
>REISERFS (device dm-2): Using r5 hash to sort names
>REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-3): using ordered data mode
>REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-3): checking transaction log (dm-3)
>REISERFS (device dm-3): replayed 1 transactions in 0 seconds
>REISERFS (device dm-3): Using r5 hash to sort names
>XFS mounting filesystem sda6
>Ending clean XFS mount for filesystem: sda6
>Adding 1572856k swap on /dev/mapper/mainframe-swap.  Priority:-1 extents:1 across:1572856k 
>bash used greatest stack depth: 3816 bytes left
>tg3 0000:09:00.0: irq 30 for MSI/MSI-X
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>cc1 used greatest stack depth: 3600 bytes left
>CE: hpet increasing min_delta_ns to 15000 nsec
>usb 6-2: reset low speed USB device using uhci_hcd and address 2
>usb 6-2: USB disconnect, address 2
>usb 6-2: new low speed USB device using uhci_hcd and address 3
>usb 6-2: device descriptor read/64, error -71
>usb 6-2: device descriptor read/64, error -71
>usb 6-2: new low speed USB device using uhci_hcd and address 4
>usb 6-2: device descriptor read/64, error -71
>usb 6-2: device descriptor read/64, error -71
>usb 6-2: new low speed USB device using uhci_hcd and address 5
>usb 6-2: device not accepting address 5, error -71
>usb 6-2: new low speed USB device using uhci_hcd and address 6
>usb 6-2: device not accepting address 6, error -71
>hub 6-0:1.0: unable to enumerate USB device on port 2
>usb 6-2: new low speed USB device using uhci_hcd and address 7
>usb 6-2: configuration #1 chosen from 1 choice
>input: USB_PS2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input15
>generic-usb 0003:15CA:00C3.0004: input,hidraw0: USB HID v1.10 Mouse [USB_PS2 Optical Mouse] on usb-0000:00:1d.1-2/input0
>usb 6-2: reset low speed USB device using uhci_hcd and address 7
>usb 6-2: reset low speed USB device using uhci_hcd and address 7
>usb 6-2: reset low speed USB device using uhci_hcd and address 7
>usb 6-2: reset low speed USB device using uhci_hcd and address 7
>usb 6-2: reset low speed USB device using uhci_hcd and address 7
>usb 6-2: reset low speed USB device using uhci_hcd and address 7

Actions: View

Attachments on bug 25489: 31820 | 31821 | 31822

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.