Attachment 32439 Details for Bug 25892 – dmesg output

dmesg output

dmesg.txt (text/plain), 35.16 KB, created by Heinrich Fu Jin Wang on 2010-01-04 09:19:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Heinrich Fu Jin Wang

Created: 2010-01-04 09:19:36 UTC

Size: 35.16 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32.2 (root@siduxbox) (gcc version 4.4.2 (Debian 4.4.2-6) ) #1 SMP PREEMPT Fri Dec 25 17:16:39 CET 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable)
> BIOS-e820: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x7ffa8 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>initial memory mapped : 0 - 00800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 10000-15000
>RAMDISK: 37956000 - 37fefe41
>Allocated new RAMDISK: 005a3000 - 00c3ce41
>Move RAMDISK from 0000000037956000 - 0000000037fefe40 to 005a3000 - 00c3ce40
>ACPI: RSDP 000f7af0 00014 (v00 ACPIAM)
>ACPI: RSDT 7ffb0000 00040 (v01 _ASUS_ Notebook 02000715 MSFT 00000097)
>ACPI: FACP 7ffb0200 00084 (v02 AMI    OEMFACP  02000715 MSFT 00000097)
>ACPI: DSDT 7ffb05e0 08918 (v01  F3J00 F3J00001 00000001 INTL 02002026)
>ACPI: FACS 7ffbe000 00040
>ACPI: APIC 7ffb0390 0005C (v01 AMI    OEMAPIC  02000715 MSFT 00000097)
>ACPI: MCFG 7ffb03f0 0003C (v01 AMI    OEMMCFG  02000715 MSFT 00000097)
>ACPI: BOOT 7ffb05b0 00028 (v01 AMI    OEMBOOT  02000715 MSFT 00000097)
>ACPI: SLIC 7ffb0430 00176 (v01 _ASUS_ Notebook 02000715 MSFT 00000097)
>ACPI: OEMB 7ffbe040 00046 (v01 AMI    AMI_OEM  02000715 MSFT 00000097)
>ACPI: HPET 7ffb8f00 00038 (v01 AMI        ASUS 02000715 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>1159MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00011000 - 00017f00
>(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 000059f724]    TEXT DATA BSS ==> [0000100000 - 000059f724]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [00005a0000 - 00005a21cd]              BRK ==> [00005a0000 - 00005a21cd]
>  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>  #7 [00005a3000 - 0000c3ce41]      NEW RAMDISK ==> [00005a3000 - 0000c3ce41]
>  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007ffa8
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ffa8
>On node 0 totalpages: 524087
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2320 pages used for memmap
>  HighMem zone: 294554 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @c2400000 s29592 r0 d23656 u2097152
>pcpu-alloc: s29592 r0 d23656 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519991
>Kernel command line: root=UUID=9fdfbfb8-8f83-481d-9595-a1ec167fd27b ro quiet modeset=1 3
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0007ffa8)
>Memory: 2066344k/2096800k available (2797k kernel code, 28972k reserved, 1114k data, 376k init, 1187496k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff90000 - 0xfffff000   ( 444 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc04d2000 - 0xc0530000   ( 376 kB)
>      .data : 0xc03bb43b - 0xc04d1d08   (1114 kB)
>      .text : 0xc0100000 - 0xc03bb43b   (2797 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Experimental preemptable hierarchical RCU implementation.
>NR_IRQS:2304 nr_irqs:424
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 1997.486 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3994.97 BogoMIPS (lpj=1997486)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090903
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) Duo CPU      T2450  @ 2.00GHz stepping 0c
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3994.64 BogoMIPS (lpj=1997321)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring handled by SMI
>CPU1: Intel(R) Core(TM) Duo CPU      T2450  @ 2.00GHz stepping 0c
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (7989.61 BogoMIPS).
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
>PCI: Using MMCONFIG for extended config space
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xec00-0xec1f]
>pci 0000:00:1d.1: reg 20 io port: [0xe880-0xe89f]
>pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
>pci 0000:00:1d.3: reg 20 io port: [0xe480-0xe49f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebfbc00-0xfebfbfff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
>pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xfdff0000-0xfdffffff]
>pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfdfc0000-0xfdfdffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:01.0: bridge io port: [0x9000-0xbfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xebe00000-0xfbdfffff]
>pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfe0ff000-0xfe0fffff]
>pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe0e0000-0xfe0effff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
>pci 0000:03:00.0: reg 10 32bit mmio: [0xfe1ff000-0xfe1fffff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
>pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0xfe200000-0xfe9fffff]
>pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfbe00000-0xfddfffff]
>pci 0000:06:01.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
>pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:06:01.0: PME# disabled
>pci 0000:06:01.1: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
>pci 0000:06:01.1: supports D1 D2
>pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:01.1: PME# disabled
>pci 0000:06:01.2: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff]
>pci 0000:06:01.2: supports D1 D2
>pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:01.2: PME# disabled
>pci 0000:06:01.3: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
>pci 0000:06:01.3: supports D1 D2
>pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:01.3: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
>system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:0a: ioport range 0x250-0x253 has been reserved
>system 00:0a: ioport range 0x256-0x25f has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: iomem range 0xfec10000-0xfec17fff has been reserved
>system 00:0a: iomem range 0xfec18000-0xfec1ffff has been reserved
>system 00:0a: iomem range 0xfec20000-0xfec27fff has been reserved
>system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x9000-0xbfff
>pci 0000:00:01.0:   MEM window: 0xfdf00000-0xfdffffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000ebe00000-0x000000fbdfffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.0:   MEM window: 0xfe000000-0xfe0fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x00000080000000-0x000000801fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x1000-0x1fff
>pci 0000:00:1c.1:   MEM window: 0xfe100000-0xfe1fffff
>pci 0000:00:1c.1:   PREFETCH window: 0x00000080200000-0x000000803fffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.2:   MEM window: 0xfe200000-0xfe9fffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000fbe00000-0x000000fddfffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xfea00000-0xfeafffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>  alloc irq_desc for 16 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: enabling device (0106 -> 0107)
>  alloc irq_desc for 17 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 18 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0x9000-0xbfff]
>pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff]
>pci_bus 0000:01: resource 2 pref mem [0xebe00000-0xfbdfffff]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe0fffff]
>pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
>pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
>pci_bus 0000:03: resource 1 mem: [0xfe100000-0xfe1fffff]
>pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
>pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:04: resource 1 mem: [0xfe200000-0xfe9fffff]
>pci_bus 0000:04: resource 2 pref mem [0xfbe00000-0xfddfffff]
>pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff]
>pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>Unpacking initramfs...
>Freeing initrd memory: 6759k freed
>Simple Boot Flag at 0x52 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1262623443.374:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1731
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>  alloc irq_desc for 24 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:01.0: setting latency timer to 64
>  alloc irq_desc for 25 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 26 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 27 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>Fixed MDIO Bus: probed
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 376k freed
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (60 C)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:00.0: setting latency timer to 64
>  alloc irq_desc for 28 on node -1
>  alloc kstat_irqs on node -1
>r8169 0000:02:00.0: irq 28 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xf8204000, 00:1b:fc:5c:57:aa, XID 18000000 IRQ 28
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 1)
>ricoh-mmc: Controller is now disabled.
>SCSI subsystem initialized
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  alloc irq_desc for 23 on node -1
>  alloc kstat_irqs on node -1
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>firewire_ohci 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32.2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.13
>  alloc irq_desc for 19 on node -1
>  alloc kstat_irqs on node -1
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32.2 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32.2 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32.2 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32.2 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>firewire_ohci: Added fw-ohci device 0000:06:01.0, OHCI version 1.0
>sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
>sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
>ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/33
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WR02 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>usb 1-8: new high speed USB device using ehci_hcd and address 5
>firewire_core: created device fw0: GUID 00e018000391c538, S400
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>usb 1-8: New USB device found, idVendor=0c45, idProduct=624f
>usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-8: Product: USB20 Camera    
>usb 1-8: configuration #1 chosen from 1 choice
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: New USB device found, idVendor=1267, idProduct=0210
>usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 2-1: Product: PS/2+USB Mouse
>usb 2-1: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: New USB device found, idVendor=04f9, idProduct=01e8
>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
>usb 3-1: SerialNumber: 000E8N233504
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>usb 3-2: New USB device found, idVendor=0603, idProduct=00f2
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: USB Keyboard
>usb 3-2: Manufacturer: NOVATEK
>usb 3-2: configuration #1 chosen from 1 choice
>udev: starting version 149
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>ACPI: SSDT 7ffb8f40 00D24 (v01    AMI   CPU1PM 00000001 INTL 02002026)
>Marking TSC unstable due to TSC halts in idle
>processor LNXCPU:00: registered as cooling_device0
>ACPI Warning: Incorrect checksum in table [SSDT] - EB, should be 2E (20090903/tbutils-314)
>ACPI: SSDT 7ffb9c70 00D24 (v01    AMI   CPU2PM 00000001 INTL 02002026)
>Switching to clocksource hpet
>ACPI: Lid Switch [LID]
>asus_laptop: Asus Laptop Support version 0.42
>acpi device:17: registered as cooling_device1
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input3
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>processor LNXCPU:01: registered as cooling_device2
>asus_laptop:   F3JR model detected
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
>ACPI: Power Button [PWRF]
>input: Asus Laptop extra buttons as /devices/virtual/input/input7
>Registered led device: asus::touchpad
>asus_laptop: Brightness ignored, must be controlled by ACPI video driver
>Driver 'rtc_cmos' needs updating - please use bus_type methods
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cfg80211: Calling CRDA to update world regulatory domain
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMB0 [0x400-0x40f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
>intel_rng: FWH not detected
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2009 Intel Corporation
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: setting latency timer to 64
>iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
>  alloc irq_desc for 29 on node -1
>  alloc kstat_irqs on node -1
>iwl3945 0000:03:00.0: irq 29 for MSI/MSI-X
>usbcore: registered new interface driver hiddev
>input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input10
>generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
>input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input11
>generic-usb 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input0
>input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input12
>generic-usb 0003:0603:00F2.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Linux video capture interface: v2.00
>gspca: main v2.7.0 registered
>gspca: probing 0c45:624f
>sn9c20x: OV9650 sensor detected
>gspca: probe ok
>usbcore: registered new interface driver sn9c20x
>sn9c20x: registered
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E8
>usbcore: registered new interface driver usblp
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC660-VD: BIOS auto-probing.
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
>EXT3 FS on sda4, internal journal
>lp: driver loaded but no devices found
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] Forcing AGP to PCIE mode
>[drm] register mmio base: 0xFDFF0000
>[drm] register mmio size: 65536
>ATOM BIOS: Asus
>[drm] GPU reset succeed (RBBM_STATUS=0x10000140)
>[drm] Generation 2 PCI interface, using max accessible memory
>[drm] radeon: VRAM 128M
>[drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
>[drm] radeon: GTT 512M
>[drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
>  alloc irq_desc for 30 on node -1
>  alloc kstat_irqs on node -1
>radeon 0000:01:00.0: irq 30 for MSI/MSI-X
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 64bits DDR
>[TTM] Zone  kernel: Available graphics memory: 443508 kiB.
>[TTM] Zone highmem: Available graphics memory: 1037256 kiB.
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
>[drm] radeon: 1 quad pipes, 1 z pipes initialized.
>[drm] PCIE GART of 512M enabled (table at 0x00040000).
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading R500 Microcode
>platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
>[drm] radeon: ring at 0x0000000020000000
>[drm] ring test succeeded in 8 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVTM1
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_KLDSCP_DAC2
>[drm] Connector 3:
>[drm]   DVI-I
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
>[drm] fb mappable at 0xF00C0000
>[drm] vram apper at 0xF0000000
>[drm] size 4096000
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fbcon: radeondrmfb (fb0) is primary device
>executing set pll
>executing set crtc timing
>[drm] LVDS-10: set mode 1280x800 1a
>Console: switching to colour frame buffer device 160x50
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>loop: module loaded
>ISO 9660 Extensions: Microsoft Joliet Level 1
>ISOFS: changing to secondary root
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>fuse init (API version 7.13)
>r8169: eth0: link up
>r8169: eth0: link up
>NET: Registered protocol family 17
>ppdev: user-space parallel port driver
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>eth0: no IPv6 routers present
>glxinfo[7533]: segfault at 10 ip b714add7 sp bfa71350 error 4 in r300_dri.so[b7104000+273000]
>glxinfo[7585]: segfault at 10 ip b72a8dd7 sp bfc1a430 error 4 in r300_dri.so[b7262000+273000]
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>Unpin not necessary for f6329d00 !
>CE: hpet increasing min_delta_ns to 15000 nsec

Actions: View

Attachments on bug 25892: 32438 | 32439

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.