Attachment 32872 Details for Bug 26298 – dmesg buffer

dmesg buffer

dmesg.txt (text/plain), 11.81 KB, created by belette on 2010-01-28 09:13:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: belette

Created: 2010-01-28 09:13:09 UTC

Size: 11.81 KB

patch

obsolete

>Linux version 2.6.28-rc9-omap1 (luofc@LINUXSERVER) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) #1 Thu Nov 5 17:42:50 CST 2009
>CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f
>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
>Machine: OMAP3 Beagle Board
>Memory policy: ECC disabled, Data cache writeback
>On node 0 totalpages: 32768
>free_area_init_node: node 0, pgdat c0435fdc, node_mem_map c045a000
>  Normal zone: 256 pages used for memmap
>  Normal zone: 0 pages reserved
>  Normal zone: 32512 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>OMAP3430 Unknown revision
>
>SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
>Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait video=omapfb:mode:7inch_LCD
>Clocking rate (Crystal/DPLL/ARM core): 26.0/266/500 MHz
>GPMC revision 5.0
>IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts
>Total of 96 interrupts on 1 active controller
>OMAP34xx GPIO hardware version 2.5
>PID hash table entries: 512 (order: 9, 2048 bytes)
>OMAP clockevent source: GPTIMER12 at 32768 Hz
>Console: colour dummy device 80x30
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>Memory: 128MB = 128MB total
>Memory: 125340KB available (3908K code, 352K data, 156K init)
>Calibrating delay loop... 508.37 BogoMIPS (lpj=1986560)
>Mount-cache hash table entries: 512
>CPU: Testing write buffer coherency: ok
>net_namespace: 288 bytes
>NET: Registered protocol family 16
>Found NAND on CS0
>Registering NAND on CS0
>omap3evmdc: Driver registration complete 
>OMAP DMA hardware revision 4.0
>USB: No board-specific platform config found
>OMAP DSS rev 2.0
>OMAP DISPC rev 3.0
>OMAP VENC rev 2
>i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
>Spurious irq 95: 0xffffffdf, please flush posted write for irq 56
>Spurious irq 95: 0xffffffdf, please flush posted write for irq 56
>twl4030: PIH (irq 7) chaining IRQs 368..375
>twl4030: power (irq 373) chaining IRQs 376..383
>twl4030: gpio (irq 368) chaining IRQs 384..401
>i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
>i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
>SCSI subsystem initialized
>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
>musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
>musb_hdrc: MHDRC RTL version 1.400 
>musb_hdrc: setup fifo_mode 4
>musb_hdrc: 29/31 max ep, 15424/16384 memory
>musb_hdrc: hw_ep 0shared, max 64
>musb_hdrc: hw_ep 1tx, max 512
>musb_hdrc: hw_ep 1rx, max 512
>musb_hdrc: hw_ep 2tx, max 512
>musb_hdrc: hw_ep 2rx, max 512
>musb_hdrc: hw_ep 3tx, max 512
>musb_hdrc: hw_ep 3rx, max 512
>musb_hdrc: hw_ep 4tx, max 512
>musb_hdrc: hw_ep 4rx, max 512
>musb_hdrc: hw_ep 5tx, max 512
>musb_hdrc: hw_ep 5rx, max 512
>musb_hdrc: hw_ep 6tx, max 512
>musb_hdrc: hw_ep 6rx, max 512
>musb_hdrc: hw_ep 7tx, max 512
>musb_hdrc: hw_ep 7rx, max 512
>musb_hdrc: hw_ep 8tx, max 512
>musb_hdrc: hw_ep 8rx, max 512
>musb_hdrc: hw_ep 9tx, max 512
>musb_hdrc: hw_ep 9rx, max 512
>musb_hdrc: hw_ep 10tx, max 512
>musb_hdrc: hw_ep 10rx, max 512
>musb_hdrc: hw_ep 11tx, max 512
>musb_hdrc: hw_ep 11rx, max 512
>musb_hdrc: hw_ep 12tx, max 512
>musb_hdrc: hw_ep 12rx, max 512
>musb_hdrc: hw_ep 13tx, max 512
>musb_hdrc: hw_ep 13rx, max 512
>musb_hdrc: hw_ep 14shared, max 1024
>musb_hdrc: hw_ep 15shared, max 1024
>musb_hdrc: USB OTG mode controller at d80ab000 using DMA, IRQ 92
>NET: Registered protocol family 2
>Switched to high resolution mode on CPU 0
>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
>TCP: Hash tables configured (established 4096 bind 4096)
>TCP reno registered
>NET: Registered protocol family 1
>NetWinder Floating Point Emulator V0.97 (double precision)
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>JFFS2 version 2.2. (NAND) Â© 2001-2006 Red Hat, Inc.
>msgmni has been set to 245
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
>serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
>serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
>console [ttyS2] enabled
>brd: module loaded
>loop: module loaded
>dm9000 Ethernet Driver, V1.31
>eth0: dm9000a at c88ae000,c88b2400 IRQ 185 MAC: 00:11:22:33:44:55 (chip)
>Linux video capture interface: v2.00
>tvp514x 2-005d: Registered to v4l2 master omap34xxcam!!
>i2c /dev entries driver
>Driver 'sd' needs updating - please use bus_type methods
>omap2-nand driver initializing
>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron NAND 128MiB 1,8V 16-bit)
>cmdlinepart partition parsing not available
>Creating 5 MTD partitions on "omap2-nand":
>0x00000000-0x00080000 : "X-Loader"
>0x00080000-0x00260000 : "U-Boot"
>0x00260000-0x00280000 : "U-Boot Env"
>0x00280000-0x00680000 : "Kernel"
>0x00680000-0x08000000 : "File System"
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
>ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
>ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
>ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>g_ether gadget: using random self ethernet address
>g_ether gadget: using random host ethernet address
>usb0: MAC da:ed:06:8b:5f:0d
>usb0: HOST MAC 76:26:b4:6b:6e:89
>g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
>g_ether gadget: g_ether ready
>musb_hdrc musb_hdrc: MUSB HDRC host driver
>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 1 port detected
>input: omap_twl4030keypad as /class/input/input0
>input: gpio-keys as /class/input/input1
>ads7846 spi2.0: touchscreen, irq 187
>input: ADS784x Touchscreen as /class/input/input2
>twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
>twl4030_rtc twl4030_rtc: Power up reset detected.
>twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC.
>Registered led device: led1
>Registered led device: led2
>Registered led device: ledB
>usb 1-1: new high speed USB device using ehci-omap and address 2
>Registered led device: led3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
>ASoC version 0.13.2
>OMAP3 omap3devkit9100 SoC init
>TWL4030 Audio Codec init 
>asoc: twl4030 <-> omap-mcbsp-dai-(link_id) mapping ok
>ALSA device list:
>  #0: omap3devkit9000 (twl4030)
>TCP cubic registered
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Power Management for TI OMAP3.
>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
>omapfb: using mode 7inch_LCD
>Console: switching to colour frame buffer device 100x30
>clock: clksel_round_rate_div: dpll4_m4_ck target_rate 72000000
>clock: new_div = 6, new_rate = 72000000
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>usb 1-1: configuration #1 chosen from 1 choice
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>mmc0: new high speed SD card at address 8fe4
>tvp514x 2-005d: Write: retry ... 5
>mmcblk0: mmc0:8fe4 SD02G 1.84 GiB 
> mmcblk0: p1 p2
>tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
>tvp514x 2-005d: Unable to detect decoder
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
>tvp514x 2-005d: Unable to detect decoder
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
>tvp514x 2-005d: Unable to detect decoder
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: Write: retry ... 0
>tvp514x 2-005d: Write: retry ... 1
>tvp514x 2-005d: Write: retry ... 2
>tvp514x 2-005d: Write: retry ... 3
>tvp514x 2-005d: Write: retry ... 4
>tvp514x 2-005d: Write: retry ... 5
>tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
>tvp514x 2-005d: Unable to detect decoder
>Display already enabled
>Buffer Size = 3686400
>omap_vout: registered and initialized			video device 0 [v4l2]
>Buffer Size = 3686400
>omap_vout: registered and initialized			video device 1 [v4l2]
>display->updated
>twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
>scsi 0:0:0:0: Direct-Access     Kingston DataTraveler2.0  1.00 PQ: 0 ANSI: 2
>sd 0:0:0:0: [sda] 1955711 512-byte hardware sectors: (1.00 GB/954 MiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 1955711 512-byte hardware sectors: (1.00 GB/954 MiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda:<6>kjournald starting.  Commit interval 5 seconds
> sda1
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>usb-storage: device scan complete
>EXT3 FS on mmcblk0p2, internal journal
>ext3_orphan_cleanup: deleting unreferenced inode 1298
>ext3_orphan_cleanup: deleting unreferenced inode 1299
>EXT3-fs: mmcblk0p2: 2 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem).
>Freeing init memory: 156K
>udevd version 124 started
>uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0
>Buffer I/O error on device mtdblock0, logical block 0
>uncorrectable error : <3>uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 8
>Buffer I/O error on device mtdblock0, logical block 1
>end_request: I/O error, dev mtdblock0, sector 16
>Buffer I/O error on device mtdblock0, logical block 2
>uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0
>Buffer I/O error on device mtdblock0, logical block 0
>sg: disagrees about version of symbol struct_module
>FAT: invalid media value (0x00)
>VFS: Can't find a valid FAT filesystem on dev sda.
>eth0: link down
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Actions: View

Attachments on bug 26298: 32870 | 32871 | 32872 | 32873 | 32874

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.