Attachment 33020 Details for Bug 26403 – Kernel dmesg showing KMS/drm setup and backtrace at kernel warning.

Kernel dmesg showing KMS/drm setup and backtrace at kernel warning.

xorg-dmesg-dump.txt (text/plain), 19.03 KB, created by Michael Cree on 2010-02-02 18:19:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Cree

Created: 2010-02-02 18:19:07 UTC

Size: 19.03 KB

patch

obsolete

>[    0.000000] Linux version 2.6.32.5-miata-p (mjc@alpha) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #2 Sat Jan 23 22:05:59 NZDT 2010
>[    0.000000] Booting on Miata using machine vector Miata from SRM
>[    0.000000] Major Options: EV56 LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ 
>[    0.000000] Command line: ro root=/dev/sdb3
>[    0.000000] memcluster 0, usage 1, start        0, end      236
>[    0.000000] memcluster 1, usage 0, start      236, end    73727
>[    0.000000] memcluster 2, usage 1, start    73727, end    73728
>[    0.000000] freeing pages 236:384
>[    0.000000] freeing pages 1094:73727
>[    0.000000] reserving pages 1094:1096
>[    0.000000] 2048K Bcache detected; load hit latency 35 cycles, load miss latency 145 cycles
>[    0.000000] pci: cia revision 1 (pyxis)
>[    0.000000] On node 0 totalpages: 73727
>[    0.000000] free_area_init_node: node 0, pgdat fffffc000083ad48, node_mem_map fffffc0000890000
>[    0.000000]   DMA zone: 504 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 73223 pages, LIFO batch:15
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 73223
>[    0.000000] Kernel command line: ro root=/dev/sdb3
>[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
>[    0.000000] Memory: 575968k/589816k available (3547k kernel code, 11320k reserved, 322k data, 200k init)
>[    0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:48
>[    0.000000] Using epoch = 2000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.002929] Calibrating delay loop... 1187.96 BogoMIPS (lpj=579584)
>[    0.024414] Mount-cache hash table entries: 512
>[    0.027343] NET: Registered protocol family 16
>[    0.029296] pci: passed tb register update test
>[    0.029296] pci: passed sg loopback i/o read test
>[    0.029296] pci: passed pte write cache snoop test
>[    0.029296] pci: failed valid tag invalid pte reload test (mcheck; workaround available)
>[    0.030273] pci: passed pci machine check test
>[    0.030273] pci: tbia workaround enabled
>[    0.030273] pci 0000:00:03.0: reg 10 io port: [0x9100-0x917f]
>[    0.030273] pci 0000:00:03.0: reg 14 32bit mmio: [0x80181000-0x8018107f]
>[    0.030273] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x80100000-0x8013ffff]
>[    0.030273] pci 0000:00:07.1: reg 10 io port: [0x1f0-0x1f7]
>[    0.030273] pci 0000:00:07.1: reg 14 io port: [0x3f4-0x3f7]
>[    0.030273] pci 0000:00:07.1: reg 20 io port: [0x91a0-0x91af]
>[    0.030273] pci 0000:00:07.2: reg 10 io port: [0x170-0x177]
>[    0.031249] pci 0000:00:07.2: reg 14 io port: [0x374-0x377]
>[    0.031249] pci 0000:00:07.2: reg 20 32bit mmio: [0x80170000-0x8017ffff]
>[    0.031249] pci 0000:00:07.3: reg 10 32bit mmio: [0x80180000-0x80180fff]
>[    0.031249] pci 0000:00:0b.0: reg 10 32bit mmio pref: [0x90000000-0x97ffffff]
>[    0.031249] pci 0000:00:0b.0: reg 14 io port: [0x9000-0x90ff]
>[    0.031249] pci 0000:00:0b.0: reg 18 32bit mmio: [0x80160000-0x8016ffff]
>[    0.031249] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0x80140000-0x8015ffff]
>[    0.031249] pci 0000:00:0b.0: supports D1 D2
>[    0.031249] pci: enabling save/restore of SRM state
>[    0.032226] pci 0000:01:04.0: reg 10 io port: [0x8000-0x80ff]
>[    0.032226] pci 0000:01:04.0: reg 14 32bit mmio: [0x80090000-0x80090fff]
>[    0.032226] pci 0000:01:04.0: reg 30 32bit mmio pref: [0x80080000-0x8008ffff]
>[    0.032226] pci 0000:01:08.0: reg 10 io port: [0x8140-0x8147]
>[    0.032226] pci 0000:01:08.0: reg 14 io port: [0x8130-0x8133]
>[    0.032226] pci 0000:01:08.0: reg 18 io port: [0x8120-0x8127]
>[    0.032226] pci 0000:01:08.0: reg 1c io port: [0x8110-0x8113]
>[    0.032226] pci 0000:01:08.0: reg 20 io port: [0x8100-0x810f]
>[    0.032226] pci 0000:01:08.0: reg 24 32bit mmio: [0x80091000-0x800911ff]
>[    0.032226] pci 0000:01:08.0: reg 30 32bit mmio pref: [0x80000000-0x8007ffff]
>[    0.032226] pci 0000:01:08.0: supports D1 D2
>[    0.035156] pci 0000:00:14.0: PCI bridge, secondary bus 0000:01
>[    0.035156] pci 0000:00:14.0:   IO window: 0x8000-0x8fff
>[    0.035156] pci 0000:00:14.0:   MEM window: 0x9000000-0x90fffff
>[    0.035156] pci 0000:00:14.0:   PREFETCH window: 0x9100000-0x91fffff
>[    0.035156] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>[    0.035156] pci_bus 0000:00: resource 1 mem: [0x000000-0x7fffffff]
>[    0.035156] pci_bus 0000:01: resource 0 io:  [0x8000-0x8fff]
>[    0.035156] pci_bus 0000:01: resource 1 mem: [0x9000000-0x90fffff]
>[    0.036132] pci_bus 0000:01: resource 2 pref mem [0x9100000-0x91fffff]
>[    0.036132] SMC37c669 Super I/O Controller found @ 0x0000000000000370
>[    0.047851] bio: create slab <bio-0> at 0
>[    0.049804] vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.049804] vgaarb: loaded
>[    0.050781] SCSI subsystem initialized
>[    0.051757] Switching to clocksource jiffies
>[    0.054687] NET: Registered protocol family 2
>[    0.054687] IP route cache hash table entries: 8192 (order: 3, 65536 bytes)
>[    0.055664] TCP established hash table entries: 32768 (order: 6, 524288 bytes)
>[    0.057617] TCP bind hash table entries: 32768 (order: 5, 262144 bytes)
>[    0.058593] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.058593] TCP reno registered
>[    0.059570] NET: Registered protocol family 1
>[    0.063476] srm_env: version 0.0.6 loaded successfully
>[    0.083007] msgmni has been set to 1126
>[    0.089843] alg: No test for stdrng (krng)
>[    0.090820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>[    0.090820] io scheduler noop registered
>[    0.090820] io scheduler cfq registered (default)
>[    0.091796] isapnp: Scanning for PnP cards...
>[    0.442382] isapnp: No Plug & Play device found
>[    0.460937] Linux agpgart interface v0.103
>[    0.461913] [drm] Initialized drm 1.1.0 20060810
>[    0.461913] [drm] radeon defaulting to kernel modesetting.
>[    0.461913] [drm] radeon kernel modesetting enabled.
>[    0.487304] [drm] radeon: Initializing kernel modesetting.
>[    0.487304] [drm] register mmio base: 0x09270000
>[    0.487304] [drm] register mmio size: 65536
>[    0.527343] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[    0.527343] [drm] radeon: VRAM 64M
>[    0.527343] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
>[    0.527343] [drm] radeon: GTT 512M
>[    0.527343] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
>[    0.527343] [drm] radeon: irq initialized.
>[    0.527343] [drm] Detected VRAM RAM=64M, BAR=128M
>[    0.527343] [drm] RAM width 64bits DDR
>[    0.527343] [TTM] Zone  kernel: Available graphics memory: 288304 kiB.
>[    0.528320] [drm] radeon: 64M of VRAM memory ready
>[    0.528320] [drm] radeon: 512M of GTT memory ready.
>[    0.528320] [drm] GART: num cpu pages 65536, num gpu pages 131072
>[    0.548827] [drm] radeon: cp idle (0x00008080)
>[    0.548827] [drm] Loading R100 Microcode
>[    0.548827] platform radeon_cp.0: firmware: using built-in firmware radeon/R100_cp.bin
>[    0.549804] [drm] radeon: ring at 0x0000000020000000
>[    0.549804] [drm] ring test succeeded in 0 usecs
>[    0.550780] [drm] radeon: ib pool ready.
>[    0.550780] [drm] ib test succeeded in 0 usecs
>[    0.551757] [drm] No TV DAC info found in BIOS
>[    0.551757] [drm] DFP table revision: 3
>[    0.552734] [drm] Radeon Display Connectors
>[    0.552734] [drm] Connector 0:
>[    0.552734] [drm]   VGA
>[    0.552734] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[    0.552734] [drm]   Encoders:
>[    0.552734] [drm]     CRT1: INTERNAL_DAC1
>[    0.552734] [drm] Connector 1:
>[    0.552734] [drm]   DVI-I
>[    0.552734] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[    0.552734] [drm]   Encoders:
>[    0.552734] [drm]     CRT2: INTERNAL_DAC2
>[    0.552734] [drm]     DFP1: INTERNAL_TMDS1
>[    0.765624] [drm] fb mappable at 0x10040000
>[    0.765624] [drm] vram apper at 0x10000000
>[    0.765624] [drm] size 7056000
>[    0.765624] [drm] fb depth is 24
>[    0.765624] [drm]    pitch is 6720
>[    0.920897] [drm] DAC-9: set mode 1680x1050 1e
>[    1.075194] Console: switching to colour frame buffer device 210x65
>[    1.147460] fb0: radeondrmfb frame buffer device
>[    1.147460] registered panic notifier
>[    1.147460] [drm] Initialized radeon 2.0.0 20080528 for 0000:00:0b.0 on minor 0
>[    1.149413] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.149413] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.150390] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.153319] Floppy drive(s): fd0 is 2.88M
>[    1.169921] FDC 0 is a post-1991 82077
>[    1.171874] Uniform Multi-Platform E-IDE driver
>[    1.172850] ide-gd driver 1.18
>[    1.173827] qla1280: QLA1040 found on PCI bus 1, dev 4
>[    1.174804] qla1280 0000:01:04.0: firmware: using built-in firmware qlogic/1040.bin
>[    1.623046] scsi(0:0): Resetting SCSI BUS
>[    4.626950] scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
>[    4.626950]        Firmware version:  7.65.06, Driver version 3.27
>[    4.634763] scsi 0:0:0:0: Direct-Access     QUANTUM  ATLAS10K3_18_WLS 020W PQ: 0 ANSI: 3
>[    4.636716] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    4.636716] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    4.637692] mice: PS/2 mouse device common for all mice
>[    4.639646] scsi(0:0:0:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
>[    4.640622] TCP cubic registered
>[    4.640622] Initializing XFRM netlink socket
>[    4.642575] NET: Registered protocol family 17
>[    4.642575] NET: Registered protocol family 15
>[    4.643552] scsi: waiting for bus probes to complete ...
>[    4.813474] scsi 0:0:2:0: Direct-Access     SEAGATE  ST336752LW       0004 PQ: 0 ANSI: 3
>[    4.815427] scsi(0:0:2:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
>[    5.177731] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    5.193356] atkbd.c: keyboard reset failed on isa0060/serio1
>[    6.824215] sd 0:0:0:0: [sda] 35916548 512-byte logical blocks: (18.3 GB/17.1 GiB)
>[    6.826168] sd 0:0:0:0: [sda] Write Protect is off
>[    6.826168] sd 0:0:0:0: [sda] Mode Sense: e5 00 10 08
>[    6.828121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
>[    6.830074] sd 0:0:2:0: [sdb] 71687369 512-byte logical blocks: (36.7 GB/34.1 GiB)
>[    6.832027] sd 0:0:2:0: [sdb] Write Protect is off
>[    6.832027] sd 0:0:2:0: [sdb] Mode Sense: a3 00 10 08
>[    6.833980]  sda:
>[    6.834957] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
>[    6.835934]  sda1 sda2 sda3 sda4 sda5
>[    6.840816]  sdb:
>[    6.843746] sd 0:0:0:0: [sda] Attached SCSI disk
>[    6.858394]  sdb1 sdb2 sdb3 sdb4 sdb5
>[    6.877926] sd 0:0:2:0: [sdb] Attached SCSI disk
>[    6.907223] kjournald starting.  Commit interval 5 seconds
>[    6.921871] EXT3-fs: mounted filesystem with writeback data mode.
>[    6.937496] VFS: Mounted root (ext3 filesystem) readonly on device 8:19.
>[    6.952144] Freeing unused kernel memory: 200k freed
>[   16.910147] cy82c693 0000:00:07.1: IDE controller (0x1080:0xc693 rev 0x00)
>[   16.962881] pci 0000:00:07.2: enabling device (0045 -> 0047)
>[   17.014639] cy82c693 0000:00:07.1: not 100% native mode: will probe irqs later
>[   17.066397]     ide0: BM-DMA at 0x9480-0x9487
>[   17.117178]     ide1: BM-DMA at 0x9488-0x948f
>[   17.167959] Probing IDE interface ide0...
>[   17.281241] usbcore: registered new interface driver usbfs
>[   17.331045] usbcore: registered new interface driver hub
>[   17.389639] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>[   17.513662] input: PC Speaker as /devices/platform/pcspkr/input/input1
>[   17.979482] libata version 3.00 loaded.
>[   17.982412] usbcore: registered new device driver usb
>[   18.056631] sata_sil 0000:01:08.0: version 2.4
>[   18.064443] scsi1 : sata_sil
>[   18.114248] scsi2 : sata_sil
>[   18.160146] ata1: SATA max UDMA/100 mmio m512@0x9001000 tf 0x9001080 irq 36
>[   18.205068] ata2: SATA max UDMA/100 mmio m512@0x9001000 tf 0x90010c0 irq 36
>[   18.417959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[   18.462881] hda: LITE-ON DVDRW SOHW-1653S, ATAPI CD/DVD-ROM drive
>[   18.930654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>[   18.981435] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
>[   19.024404] ata1.00: 390721968 sectors, multi 0: LBA48 
>[   19.065419] ata1.00: applying bridge limits
>[   19.146474] ata1.00: configured for UDMA/100
>[   19.189443] scsi 1:0:0:0: Direct-Access     ATA      ST3200822A       3.01 PQ: 0 ANSI: 5
>[   19.236318] sd 1:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>[   19.306630] sd 1:0:0:0: [sdc] Write Protect is off
>[   19.348622] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[   19.349599] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[   19.349599] hda: MWDMA2 mode selected
>[   19.389638] Probing IDE interface ide1...
>[   19.392568] ide1: no devices on the port
>[   19.431630] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[   19.470693] ide1 at 0x170-0x177,0x376 on irq 14
>[   19.514638] tulip0:  EEPROM default media type Autosense.
>[   19.551747] tulip0:  Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
>[   19.587880] tulip0:  Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
>[   19.624013] tulip0:  Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block.
>[   19.659169] tulip0:  Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block.
>[   19.694325] tulip0:  Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block.
>[   19.732411] tulip0:  MII transceiver #5 config 2100 status 784b advertising 01e1.
>[   19.769521] eth0: Digital DS21142/43 Tulip rev 48 at Port 0x9400, 00:00:f8:76:1c:bd, IRQ 24.
>[   19.803700] ata2: SATA link down (SStatus 0 SControl 310)
>[   19.976552] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   20.010731]  sdc: sdc1
>[   20.064442] sd 1:0:0:0: [sdc] Attached SCSI disk
>[   20.185536] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[   20.216786] ohci_hcd 0000:00:07.3: OHCI Host Controller
>[   20.246083] ohci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 1
>[   20.275380] ohci_hcd 0000:00:07.3: irq 10, io mem 0x09280000
>[   20.357411] ide-cd driver 5.00
>[   20.432606] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>[   20.459950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   20.487294] usb usb1: Product: OHCI Host Controller
>[   20.512684] usb usb1: Manufacturer: Linux 2.6.32.5-miata-p ohci_hcd
>[   20.538075] usb usb1: SerialNumber: 0000:00:07.3
>[   20.562489] usb usb1: configuration #1 chosen from 1 choice
>[   20.586903] hub 1-0:1.0: USB hub found
>[   20.610341] hub 1-0:1.0: 2 ports detected
>[   20.632801] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>[   20.655262] Uniform CD-ROM driver Revision: 3.20
>[   20.776356] devkit-disks-pa(509): unaligned trap at 0000000120003a9c: 000000011fb911b6 28 1
>[   20.850575] devkit-disks-pa(509): unaligned trap at 0000000120003aa4: 000000011fb911ba 28 2
>[   20.907215] devkit-disks-pa(509): unaligned trap at 0000000120003a9c: 000000011fb911c6 28 1
>[   20.945301] devkit-disks-pa(509): unaligned trap at 0000000120003aa4: 000000011fb911ca 28 2
>[   20.963856] usb 1-1: new low speed USB device using ohci_hcd and address 2
>[   21.170887] usb 1-1: New USB device found, idVendor=045e, idProduct=0040
>[   21.190418] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>[   21.207996] usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
>[   21.226551] usb 1-1: Manufacturer: Microsoft
>[   21.245106] usb 1-1: configuration #1 chosen from 1 choice
>[   21.348621] usbcore: registered new interface driver hiddev
>[   21.381824] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:07.3/usb1/1-1/1-1:1.0/input/input2
>[   21.402332] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.3-1/input0
>[   21.422840] usbcore: registered new interface driver usbhid
>[   21.443348] usbhid: v2.6:USB HID core driver
>[   22.823230] Adding 937480k swap on /dev/sdb4.  Priority:-1 extents:1 across:937480k 
>[   23.146472] EXT3 FS on sdb3, internal journal
>[   23.915026] loop: module loaded
>[   26.165025] kjournald starting.  Commit interval 5 seconds
>[   26.186510] EXT3 FS on sda5, internal journal
>[   26.208970] EXT3-fs: mounted filesystem with writeback data mode.
>[   30.144515] eth0: Setting full-duplex based on MII#5 link partner capability of 45e1.
>[   35.409161] NET: Registered protocol family 10
>[   35.409161] lo: Disabled Privacy Extensions
>[   46.395484] eth0: no IPv6 routers present
>[  769.069918] ------------[ cut here ]------------
>[  769.069918] WARNING: at fs/buffer.c:676 __set_page_dirty+0xec/0x110()
>[  769.069918] Modules linked in: ipv6 loop snd_es18xx snd_pcm snd_page_alloc snd_opl3_lib snd_hwdep snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore usbhid ide_cd_mod ohci_hcd cdrom ehci_hcd sata_sil libata evdev serio_raw pcspkr tulip usbcore ide_pci_generic cy82c693
>[  769.069918] fffffc002236fa08 0000000000000000 fffffc00003c4a9c fffffc0000a5c390 
>[  769.069918]        fffffc0022804758 0000000000581db6 fffffc00016da360 0000000000583db6 
>[  769.069918]        fffffc00003c57b4 00000200008dc000 00000200008d8000 fffffc000037ae50 
>[  769.069918]        fffffc000036905c fffffc00008a9750 fffffc000037aed0 00000200008d8000 
>[  769.069918]        fffffc000037f6c4 fffffc00224115a8 fffffc0022d11900 0000000000000000 
>[  769.069918]        fffffc0022d11960 00000000080c8000 0000000000330000 0000000001800efc 
>[  769.069918] Trace:
>[  769.069918] [<fffffc00003c4a9c>] __set_page_dirty+0xec/0x110
>[  769.069918] [<fffffc00003c57b4>] __set_page_dirty_buffers+0x84/0xc0
>[  769.069918] [<fffffc000037ae50>] unmap_vmas+0x460/0x6e0
>[  769.069918] [<fffffc000036905c>] set_page_dirty+0x3c/0x90
>[  769.069918] [<fffffc000037aed0>] unmap_vmas+0x4e0/0x6e0
>[  769.069918] [<fffffc000037f6c4>] exit_mmap+0xd4/0x1a0
>[  769.069918] [<fffffc0000327c7c>] mmput+0x5c/0x130
>[  769.069918] [<fffffc000032c088>] exit_mm+0x158/0x1c0
>[  769.069918] [<fffffc000032d5b0>] do_exit+0x630/0x7a0
>[  769.069918] [<fffffc000032d76c>] do_group_exit+0x4c/0xd0
>[  769.069918] [<fffffc000033a608>] get_signal_to_deliver+0x238/0x3a0
>[  769.069918] [<fffffc00003162d4>] do_signal+0x84/0x650
>[  769.069918] [<fffffc00003a438c>] do_lookup+0x9c/0x2d0
>[  769.069918] [<fffffc00003168fc>] do_notify_resume+0x5c/0x60
>[  769.069918] [<fffffc00003a5874>] __link_path_walk+0xd34/0xfa0
>[  769.069918] [<fffffc0000399838>] __fput+0x1c8/0x270
>[  769.069918] [<fffffc0000395438>] filp_close+0x88/0xe0
>[  769.069918] [<fffffc0000395550>] SyS_close+0xc0/0xf0
>[  769.069918] [<fffffc00003387a8>] T.588+0x128/0x260
>[  769.069918] [<fffffc0000339318>] do_send_sig_info+0x58/0x90
>[  769.069918] [<fffffc0000310ddc>] work_pending+0x5c/0x70
>[  769.069918] [<fffffc0000310c94>] entSys+0xa4/0xc0
>[  769.069918] 
>[  769.069918] ---[ end trace 05a11811407fcfd3 ]---
>[  769.733980] Unpin not necessary for fffffc00210ca600 !

Actions: View

Attachments on bug 26403: 33019 | 33020 | 35983 | 35984

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.