Attachment 33316 Details for Bug 25224 – dmesg with debug=0x04

dmesg with debug=0x04

dmesgout (text/plain), 53.16 KB, created by Henric Eriksson on 2010-02-15 10:24:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Henric Eriksson

Created: 2010-02-15 10:24:17 UTC

Size: 53.16 KB

patch

obsolete

>Linux version 2.6.33-rc7 (root@artamir) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Mon Feb 15 11:49:08 CET 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000c7d80000 (usable)
> BIOS-e820: 00000000c7d80000 - 00000000c7d8e000 (ACPI data)
> BIOS-e820: 00000000c7d8e000 - 00000000c7dd0000 (ACPI NVS)
> BIOS-e820: 00000000c7dd0000 - 00000000c7e00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0xc7d80 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-DFFFF write-protect
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 100000000 mask FE0000000 write-back
>  2 base 120000000 mask FF0000000 write-back
>  3 base 0D0000000 mask FF0000000 uncachable
>  4 base 0E0000000 mask FE0000000 uncachable
>  5 base 0C7E00000 mask FFFE00000 uncachable
>  6 base 0C8000000 mask FF8000000 uncachable
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000c7e00000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 01800000
>found SMP MP-table at [c00ff780] ff780
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 11000-16000
>ACPI: RSDP 000fba20 00024 (v02 ACPIAM)
>ACPI: XSDT c7d80100 0005C (v01 A_M_I_ OEMXSDT  10000802 MSFT 00000097)
>ACPI: FACP c7d80290 000F4 (v03 A_M_I_ OEMFACP  10000802 MSFT 00000097)
>ACPI: DSDT c7d80440 090C6 (v01  A0982 A0982055 00000055 INTL 20060113)
>ACPI: FACS c7d8e000 00040
>ACPI: APIC c7d80390 0006C (v01 A_M_I_ OEMAPIC  10000802 MSFT 00000097)
>ACPI: MCFG c7d80400 0003C (v01 A_M_I_ OEMMCFG  10000802 MSFT 00000097)
>ACPI: OEMB c7d8e040 00089 (v01 A_M_I_ AMI_OEM  10000802 MSFT 00000097)
>ACPI: HPET c7d89510 00038 (v01 A_M_I_ OEMHPET  10000802 MSFT 00000097)
>ACPI: GSCI c7d8e0d0 02024 (v01 A_M_I_ GMCHSCI  10000802 MSFT 00000097)
>ACPI: OSFR c7d89550 000B0 (v01 A_M_I_ OEMOSFR  10000802 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>2309MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00012000 - 00018f00
>(12 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0001000000 - 00015426fc]    TEXT DATA BSS ==> [0001000000 - 00015426fc]
>  #3 [0001543000 - 0001549230]              BRK ==> [0001543000 - 0001549230]
>  #4 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
>  #5 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
>  #6 [000009ec00 - 00000f1350]    BIOS reserved ==> [000009ec00 - 00000f1350]
>  #7 [00000f14a4 - 00000ff780]    BIOS reserved ==> [00000f14a4 - 00000ff780]
>  #8 [00000f1350 - 00000f14a4]     MP-table mpc ==> [00000f1350 - 00000f14a4]
>  #9 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
>  #10 [0000011000 - 0000012000]          PGTABLE ==> [0000011000 - 0000012000]
>  #11 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x000c7d80
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000c7d80
>On node 0 totalpages: 818446
>free_area_init_node: node 0, pgdat c1469800, node_mem_map c154b200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3950 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 4620 pages used for memmap
>  HighMem zone: 586614 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at c7e00000 (gap: c7e00000:37000000)
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @c3000000 s34712 r0 d22632 u1048576
>pcpu-alloc: s34712 r0 d22632 u1048576 alloc=1*4194304
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 812050
>Kernel command line: root=/dev/sda3 i915.modeset=1 drm.debug=0x04
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:000c7d80)
>Memory: 3240516k/3274240k available (3287k kernel code, 32112k reserved, 1246k data, 412k init, 2364936k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc146e000 - 0xc14d5000   ( 412 kB)
>      .data : 0xc1335f75 - 0xc146db64   (1246 kB)
>      .text : 0xc1000000 - 0xc1335f75   (3287 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Hierarchical RCU implementation.
>NR_IRQS:512
>CPU 0 irqstacks, hard=c3000000 soft=c3001000
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2533.487 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5069.09 BogoMIPS (lpj=8444956)
>Security Framework initialized
>Mount-cache hash table entries: 512
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 15k freed
>ACPI: Core revision 20091214
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz stepping 06
>APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
>APIC delta adjusted to PM-Timer: 1666723 (1944506)
>CPU 1 irqstacks, hard=c3100000 soft=c3101000
>Booting Node   0, Processors  #1
>Initializing CPU#1
>Brought up 2 CPUs
>Total of 2 processors activated (10137.04 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xc7e00000-0xdfffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
>pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xcc00-0xcc07]
>pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
>pci 0000:00:1a.0: reg 20: [io  0xc480-0xc49f]
>pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
>pci 0000:00:1a.2: reg 20: [io  0xc880-0xc89f]
>pci 0000:00:1a.7: reg 10: [mem 0xfe3fb000-0xfe3fb3ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xfe3f4000-0xfe3f7fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xc000-0xc01f]
>pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
>pci 0000:00:1d.2: reg 20: [io  0xc400-0xc41f]
>pci 0000:00:1d.7: reg 10: [mem 0xfe3fa000-0xfe3fa3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>pci 0000:00:1f.2: reg 10: [io  0xb880-0xb887]
>pci 0000:00:1f.2: reg 14: [io  0xb800-0xb803]
>pci 0000:00:1f.2: reg 18: [io  0xb480-0xb487]
>pci 0000:00:1f.2: reg 1c: [io  0xb400-0xb403]
>pci 0000:00:1f.2: reg 20: [io  0xb080-0xb09f]
>pci 0000:00:1f.2: reg 24: [mem 0xfe3f8000-0xfe3f87ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xfe3f9000-0xfe3f90ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:02:00.0: reg 10: [mem 0xfeae0000-0xfeafffff]
>pci 0000:02:00.0: reg 14: [mem 0xfeac0000-0xfeadffff]
>pci 0000:02:00.0: reg 18: [io  0xec00-0xec1f]
>pci 0000:02:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:01:00.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
>pci 0000:01:00.0: reg 14: [mem 0xfe9c0000-0xfe9dffff]
>pci 0000:01:00.0: reg 18: [io  0xdc00-0xdc1f]
>pci 0000:01:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 01-01]
>pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.1:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:03:03.0: reg 10: [mem 0xfebff000-0xfebfffff]
>pci 0000:03:03.0: supports D1 D2
>pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:03:03.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:06: [io  0x0290-0x029f] has been reserved
>system 00:07: [io  0x04d0-0x04d1] has been reserved
>system 00:07: [io  0x0800-0x087f] has been reserved
>system 00:07: [io  0x0500-0x057f] could not be reserved
>system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
>system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
>system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0d: [mem 0x00100000-0xc7dfffff] could not be reserved
>system 00:0d: [mem 0xe0000000-0xffffffff] could not be reserved
>pci 0000:00:1c.0: BAR 9: assigned [mem 0xc8000000-0xc81fffff 64bit pref]
>pci 0000:00:1c.1: BAR 9: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.0:   bridge window [mem 0xc8000000-0xc81fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 01-01]
>pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.1:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 03-03]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:02: resource 2 [mem 0xc8000000-0xc81fffff 64bit pref]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
>pci_bus 0000:01: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
>pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:03: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 32 bytes, default 64
>microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
>microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>msgmni has been set to 1712
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered (default)
>io scheduler cfq registered
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
>agpgart-intel 0000:00:00.0: detected 131068K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>floppy0: no floppy controllers found
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>Probing IDE interface ide0...
>ide0: no devices on the port
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide1: no devices on the port
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-gd driver 1.18
>ide-cd driver 5.00
>3ware Storage Controller device driver for Linux v1.26.02.002.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8100 irq 26
>ata2: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8180 irq 26
>ata3: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8200 irq 26
>ata4: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8280 irq 26
>ata5: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8300 irq 26
>ata6: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8380 irq 26
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe3fb000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe3fa000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>Using IPI Shortcut mode
>rtc_cmos 00:03: setting system clock to 2010-02-15 18:52:50 UTC (1266259970)
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
>ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>scsi6 : usb-storage 1-2:1.0
> sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>ata2: SATA link down (SStatus 0 SControl 300)
>input: MLK TB-104 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
>sunplus 0003:04FC:05D8.0001: input: USB HID v1.00 Keyboard [MLK TB-104] on usb-0000:00:1a.0-1/input0
>sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
>input: MLK TB-104 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input3
>sunplus 0003:04FC:05D8.0002: input: USB HID v1.00 Mouse [MLK TB-104] on usb-0000:00:1a.0-1/input1
>ata3: SATA link down (SStatus 0 SControl 300)
>usb 8-2: new full speed USB device using uhci_hcd and address 2
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda3): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 412k freed
>Write protecting the kernel text: 3288k
>Write protecting the kernel read-only data: 980k
>udev: starting version 146
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
>e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>e1000e 0000:02:00.0: setting latency timer to 64
>e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
>usblp0: Disabling reads from problematic bidirectional printer
>usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
>usbcore: registered new interface driver usblp
>ohci1394 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febff000-febff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:17:d5:d4
>0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:02:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-003
>e1000e 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>e1000e 0000:01:00.0: setting latency timer to 64
>e1000e 0000:01:00.0: irq 28 for MSI/MSI-X
>udev: renamed network interface eth0 to wan
>0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:17:d5:e5
>0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:01:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-003
>udev: renamed network interface eth0 to lan
>EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (sda3): using internal journal
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>w83627ehf: Found W83667HG chip at 0x290
>ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00019ab75b]
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended
>EXT3-fs (sda5): using internal journal
>EXT3-fs (sda5): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): warning: checktime reached, running e2fsck is recommended
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended
>EXT3-fs (sda7): using internal journal
>EXT3-fs (sda7): mounted filesystem with writeback data mode
>Adding 3903784k swap on /dev/sda2.  Priority:-1 extents:1 across:3903784k 
>scsi 6:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
>sd 6:0:0:0: Attached scsi generic sg1 type 0
>sd 6:0:0:0: [sdb] 8027790 512-byte logical blocks: (4.11 GB/3.82 GiB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>e1000e 0000:01:00.0: irq 28 for MSI/MSI-X
>e1000e 0000:01:00.0: irq 28 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): lan: link is not ready
>NET: Registered protocol family 17
>e1000e: lan NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
>e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
>e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): wan: link is not ready
>e1000e: wan NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>0000:02:00.0: wan: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
>lan: no IPv6 routers present
>wan: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>i915 0000:00:02.0: irq 29 for MSI/MSI-X
>[drm] set up 127M of stolen space
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_setup_outputs], probing SDVOB
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOB
>[drm:intel_setup_outputs], probing HDMI on SDVOB
>[drm:intel_setup_outputs], probing DP_B
>[drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_setup_outputs], probing SDVOC
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOC
>[drm:intel_setup_outputs], probing HDMI on SDVOC
>[drm:intel_setup_outputs], probing DP_C
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 7 enabled? yes
>[drm:drm_enable_connectors], connector 9 enabled? no
>[drm:drm_enable_connectors], connector 11 enabled? no
>[drm:drm_enable_connectors], connector 13 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 7
>[drm:drm_target_preferred], looking for preferred mode on connector 7
>[drm:drm_target_preferred], found mode 1920x1080
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[drm:intelfb_probe], 
>[drm:intelfb_create], allocated 1920x1080 fb: 0x08020000, bo f5409ec0
>Console: switching to colour frame buffer device 240x67
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f6a9f000 3 fb: f54473c0 connectors: f61aa520 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 148500
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:intel_crtc_mode_set], disabling CxSR downclocking
>[drm:intel_pipe_set_base], Writing base 08020000 00000000 0 0
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 148500
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 148500
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 148500
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f64c6000 4 fb: f54473c0 connectors: f61aa500 num_connectors: 0 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 148500
>[drm:drm_mode_getresources], Counted 2 5 5
>[drm:drm_mode_getresources], Counted 2 5 5
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f6a9f000 3 fb: f62812c0 connectors: f6340fe0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:intel_pipe_set_base], Writing base 08817000 00000000 0 0
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x540 mode 7
>[drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 9:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 11:
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2
>[drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:drm_mode_getconnector], connector id 13:
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8
>[drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f6a9f000 3 fb: f54473c0 connectors: f61aa520 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:intel_pipe_set_base], Writing base 08020000 00000000 0 0
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f6a9f000 3 fb: f54473c0 connectors: f61aa520 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f6a9f000 3 fb: f54473c0 connectors: f61aa520 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f6a9f000 3 fb: f54473c0 connectors: f61aa520 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: f64c6000 4 fb: f54473c0 connectors: f61aa500 num_connectors: 0 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to f6a9f000
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 148500

Actions: View

Attachments on bug 25224: 31384 | 31385 | 31386 | 31387 | 33316 | 33317 | 33318

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.