Attachment 33774 Details for Bug 26897 – xorg.conf file

xorg.conf file

xorg.conf (text/plain), 9.00 KB, created by Davin McCall on 2010-03-04 17:05:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Davin McCall

Created: 2010-03-04 17:05:15 UTC

Size: 9.00 KB

patch

obsolete

>
># **********************************************************************
># This is a sample configuration file only, intended to illustrate
># what a config file might look like.  Refer to the XF86Config(4/5)
># man page for details about the format of this file. This man page
># is installed as /usr/X11R7/man/man5/XF86Config.5x 
># **********************************************************************
>
># **********************************************************************
># Any number of ServerLayout sections may be present.  Each describes
># the way multiple screens are organised.  A specific ServerLayout
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
>#Section "ServerLayout"
># The Identifier line must be present
>#    Identifier	"Main Layout"
># Each Screen line specifies a Screen section name, and optionally
># the relative position of other screens.  The four names after
># primary screen name are the screens to the top, bottom, left and right
># of the primary screen.  In this example, screen 2 is located to the
># right of screen 1.
>#    Screen	"Screen MGA 1"	""	""	""	"Screen MGA 2"
>#    Screen	"Screen MGA 2"	""	""	"Screen MGA 1"	""
># Each InputDevice line specifies an InputDevice section name and
># optionally some options to specify the way the device is to be
># used.  Those options include "CorePointer", "CoreKeyboard" and
># "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
># and "Mouse2" is an extended input device that also generates core
># pointer events (i.e., both mice will move the standard pointer).
>#    InputDevice	"Mouse1" "CorePointer"
>#    InputDevice	"Mouse2" "SendCoreEvents"
>#    InputDevice "Keyboard1" "CoreKeyboard"
>#EndSection
>
>Section "ServerLayout"
>	Identifier     "simple layout"
>	Screen      0  "MainScreen" 0 0
>	InputDevice    "Mouse1" "CorePointer"
>	InputDevice    "Keyboard1" "CoreKeyboard"
>EndSection
>
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
># Multiple FontPath entries are allowed (which are concatenated together),
># as well as specifying multiple comma-separated entries in one FontPath
># command (or a combination of both methods)
># ModulePath can be used to set a search path for the X server modules.
># The default path is shown here.
>#    ModulePath	"/usr/X11R7/lib/modules"
>#	RgbPath      "/usr/X11R7/lib/X11/rgb"
>	FontPath     "/usr/X11R7/lib/X11/fonts/misc/"
>	FontPath     "/usr/X11R7/lib/X11/fonts/TTF/"
>	FontPath     "/usr/X11R7/lib/X11/fonts/Type1/"
>	FontPath     "/usr/X11R7/lib/X11/fonts/75dpi/"
>	FontPath     "/usr/X11R7/lib/X11/fonts/100dpi/"
>EndSection
>
>Section "Module"
>
># Need fb before exa, or exa won't load
># initialisation of the XFree86-DGA extension within that module.
># This loads the Type1 and FreeType font modules
>	Load  "fb"
>	Load  "exa"
>	Load  "dri"
>	Load  "dbe"
>	Load  "glx"
>	Load  "extmod"
>
>	Load  "freetype"
>
>EndSection
>
>Section "ServerFlags"
>
># sequences.  This allows clients to receive these key events.
>#    Option	"DontZoom"
># Uncomment this to disable tuning with the xvidtune client. With
># it the client can still run and fetch card and monitor attributes,
># but it will not be allowed to change them. If it tries it will
># receive a protocol error.
>#    Option	"DisableVidModeExtension"
># Uncomment this to disable dynamically modifying the input device
># (mouse and keyboard) settings.
>#    Option	"DisableModInDev"
># Set the basic blanking screen saver timeout.
># Set the DPMS timeouts.  These are set here because they are global
># rather than screen-specific.  These settings alone don't enable DPMS.
># It is enabled per-screen (or per-monitor), and even then only when
># the driver supports it.
># memory and pio ranges. This is done by assuming that PCI ranges
># don't overlap. Some broken BIOSes tend to set ranges of inactive
># devices wrong. Here one can adjust how aggressive the assumptions
># should be. Default is 0.
># Option   "EstimateSizesAggresively" "0"
>	Option	    "Xinerama" "false"
>	Option	    "DefaultServerLayout" "simple layout"
>	Option	    "DontVTSwitch" "false"
>	Option	    "VTSysReq" "off"
>	Option	    "HandleSpecialKeys" "always"
>	Option	    "BlankTime" "0"	# disable
>	Option	    "Standby Time" "2"
>	Option	    "Suspend Time" "3"
>	Option	    "Off Time" "4"
>
>	#Option	"AllowEmptyInput" "false"
>EndSection
>
>Section "InputDevice"
>
>	Identifier  "Keyboard1"
>	Driver      "kbd"
>	Option	    "XkbRules" "xorg"
>	Option	    "XkbModel" "pc104"
>	Option	    "XkbLayout" "us"
>EndSection
>
>Section "InputDevice"
>
># Identifier and driver
># The mouse protocol and device.  The device is normally set to /dev/mouse,
># which is usually a symbolic link to the real device.
>#    Option	"Protocol"	"Microsoft"
># protocol setting can be used when using a newer PnP mouse:
>#    Option	"Protocol"	"Auto"
># When using mouse connected to a PS/2 port (aka "MousePort), set the
># the protocol as follows.  On some platforms some other settings may
># be available.
>#    Option "Protocol"	"PS/2"
>#    Option "Protocol"  "IntelliMouse"
># the following instead of any of the lines above.  The Device line
># is not required in this case.
>#    Option	"Protocol"	"Xqueue"
># Baudrate and SampleRate are only for some older Logitech mice.  In
># almost every case these lines should be omitted.
>#    Option	"BaudRate"	"9600"
>#    Option	"SampleRate"	"150"
># Emulate3Buttons is an option for 2-button mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>#    Option	"Emulate3Buttons"
>#    Option	"Emulate3Timeout"	"50"
>	Identifier  "Mouse1"
>	Driver      "mouse"
>	Option	    "Device" "/dev/input/mice"
># On platforms where PnP mouse detection is supported the following
>	Option	    "Protocol" "IMPS/2"
>	Option	    "Buttons" "5"
>	Option	    "ZAxisMapping" "4 5"
># When using XQUEUE (only for SVR3 and SVR4, but not Solaris), use
>EndSection
>
>Section "Monitor"
>
># The identifier line must be present.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>#    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
>#    HorizSync	30-64         # multisync
>#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
>#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>#    VertRefresh	60  # typical for a single frequency fixed-sync monitor
>#    VertRefresh	50-100        # multisync
>#    VertRefresh	60, 65        # multiple fixed sync frequencies
>#    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies
>#	VertRefresh	49-75
># Modes can be specified in two formats.  A compact one-line format, or
># a multi-line format.
># A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
># These two are equivalent
>#    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
>#    ModeLine "800x600" 56.30  800 828 892 1032   600 601 604 631 +hsync +vsync
>#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
>
>	Identifier   "Generic Monitor"
>#	HorizSync    30.0 - 60.0
>#	VertRefresh  49.0 - 60.0
>#	ModeLine     "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
>#	Option	    "PreferredMode" "1280x1024"
># HorizSync is in kHz unless units are specified.
>	Option	    "dpms"
># If a monitor requires that the sync signals be superimposed on the
># green signal, the following option will enable this when used with
># drivers that support it.  Only a relatively small range of hardware
># (and drivers) actually support this.
>#    Option	"sync on green"
>EndSection
>
>Section "Device"
>	#Driver   "radeonhd"
>	Driver "ati"
>	Identifier  "X1250"
>	#Option	    "TVStandard" "pal"
>	#Option      "DMAForXv" "false"
>	Option      "AccelMethod" "EXA"
>	Option      "DRI"  "on"
>EndSection
>
>Section "Device"
>	Identifier  "VGA"
>	Driver      "vga"
>EndSection
>
>Section "Screen"
>
># The Identifier, Device and Monitor lines must be present
># The favoured Depth and/or Bpp may be specified here
>#    SubSection "Display"
>#	Depth		8
>#	Modes		"800x600" "1024x768i" "640x480"
>#	ViewPort 	0 0
>#	Virtual 	640 580
>#    EndSubsection
>    #SubSection "Display"
>    #    Depth		24
>    #    Modes		"640x480"
>    #    ViewPort	0 0
>    #    Virtual 	800 600
>    #EndSubsection
>    #SubSection "Display"
>    #	Depth		1
>    #   Modes		"640x480"
>    #EndSubSection
>	Identifier "MainScreen"
>	Device     "X1250"
>	#Monitor    "Generic Monitor"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Virtual   1680 1050
>		Depth     24
>#		Modes    "1680x1050" "1280x960" "1024x768" "800x600" "640x480"
>	EndSubSection
>EndSection
>
>Section "Extensions"
>	Option	    "Composite" "disable"
>EndSection
>

Actions: View

Attachments on bug 26897: 33774 | 33775 | 33776 | 33789

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.