Attachment 33815 Details for Bug 25741 – dmesg with 2.6.33 KMS enabled

dmesg with 2.6.33 KMS enabled

dmesg.log (text/x-log), 37.98 KB, created by Philipp Claves on 2010-03-06 07:58:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Philipp Claves

Created: 2010-03-06 07:58:07 UTC

Size: 37.98 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.33-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sat Feb 27 13:28:30 CET 2010
>Command line: root=/dev/disk/by-label/arch ro
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
> BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
> BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>No AGP bridge found
>last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-D3FFF write-protect
>  D4000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Scanning 0 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000009fc00 (usable)
> modified: 000000000009fc00 - 00000000000a0000 (reserved)
> modified: 00000000000e3000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 000000007ffa0000 (usable)
> modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
> modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
> modified: 000000007fff0000 - 0000000080000000 (reserved)
> modified: 00000000fee00000 - 00000000fee01000 (reserved)
> modified: 00000000ffb00000 - 0000000100000000 (reserved)
>initial memory mapped : 0 - 20000000
>found SMP MP-table at [ffff8800000ff780] ff780
>init_memory_mapping: 0000000000000000-000000007ffa0000
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007ffa0000 page 4k
>kernel direct mapping tables up to 7ffa0000 @ 16000-1a000
>RAMDISK: 37d88000 - 37fef216
>ACPI: RSDP 00000000000f8250 00024 (v02 ACPIAM)
>ACPI: XSDT 000000007ffa0100 0007C (v01 _ASUS_ Notebook 02000812 MSFT 00000097)
>ACPI: FACP 000000007ffa0290 000F4 (v03 A_M_I_ OEMFACP  02000812 MSFT 00000097)
>ACPI: DSDT 000000007ffa0680 0B505 (v01  F3Sa0 F3Sa0303 00000303 INTL 20051117)
>ACPI: FACS 000000007ffae000 00040
>ACPI: APIC 000000007ffa0390 0005C (v01 A_M_I_ OEMAPIC  02000812 MSFT 00000097)
>ACPI: MCFG 000000007ffa0430 0003C (v01 A_M_I_ OEMMCFG  02000812 MSFT 00000097)
>ACPI: SLIC 000000007ffa0470 00176 (v01 _ASUS_ Notebook 02000812 MSFT 00000097)
>ACPI: DBGP 000000007ffa03f0 00034 (v01 A_M_I_ OEMDBGP  02000812 MSFT 00000097)
>ACPI: BOOT 000000007ffa05f0 00028 (v01 A_M_I_ OEMBOOT  02000812 MSFT 00000097)
>ACPI: ECDT 000000007ffa0620 00054 (v01 A_M_I_ OEMECDT  02000812 MSFT 00000097)
>ACPI: OEMB 000000007ffae040 00060 (v01 A_M_I_ AMI_OEM  02000812 MSFT 00000097)
>ACPI: HPET 000000007ffabb90 00038 (v01 A_M_I_ OEMHPET  02000812 MSFT 00000097)
>ACPI: ATKG 000000007ffae2a0 08024 (v01 A_M_I_  OEMATKG 05000702 MSFT 00000097)
>ACPI: SSDT 000000007ffb6de0 004E6 (v01  PmRef    CpuPm 00003000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>(12 early reservations) ==> bootmem [0000000000 - 007ffa0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 00016d6958]    TEXT DATA BSS ==> [0001000000 - 00016d6958]
>  #2 [0037d88000 - 0037fef216]          RAMDISK ==> [0037d88000 - 0037fef216]
>  #3 [00016d7000 - 00016d7240]              BRK ==> [00016d7000 - 00016d7240]
>  #4 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
>  #5 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
>  #6 [000009fc00 - 00000fd0b0]    BIOS reserved ==> [000009fc00 - 00000fd0b0]
>  #7 [00000fd274 - 00000ff780]    BIOS reserved ==> [00000fd274 - 00000ff780]
>  #8 [00000fd0b0 - 00000fd274]     MP-table mpc ==> [00000fd0b0 - 00000fd274]
>  #9 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
>  #10 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
>  #11 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ffa0
>On node 0 totalpages: 524079
>  DMA zone: 56 pages used for memmap
>  DMA zone: 104 pages reserved
>  DMA zone: 3823 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 512985 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
>PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89176 r8192 d21416 u1048576
>pcpu-alloc: s89176 r8192 d21416 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516808
>Kernel command line: root=/dev/disk/by-label/arch ro
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2053908k/2096768k available (3451k kernel code, 452k absent, 41740k reserved, 1808k data, 484k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:768
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 20971520 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2194.770 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.43 BogoMIPS (lpj=7315900)
>Security Framework initialized
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20091214
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>APIC calibration not consistent with PM-Timer: 136ms instead of 100ms
>APIC delta adjusted to PM-Timer: 1246872 (1704060)
>Booting Node   0, Processors  #1 Ok.
>CPU1: Thermal monitoring handled by SMI
>Brought up 2 CPUs
>Total of 2 processors activated (8782.30 BogoMIPS).
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
>PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI Warning: Incorrect checksum in table [ATKG] - 09, should be 59 (20091214/tbutils-314)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20: [io  0xe080-0xe09f]
>pci 0000:00:1a.1: reg 20: [io  0xe000-0xe01f]
>pci 0000:00:1a.7: reg 10: [mem 0xfebff400-0xfebff7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xfebf8000-0xfebfbfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xdc00-0xdc1f]
>pci 0000:00:1d.1: reg 20: [io  0xd880-0xd89f]
>pci 0000:00:1d.2: reg 20: [io  0xd800-0xd81f]
>pci 0000:00:1d.7: reg 10: [mem 0xfebff000-0xfebff3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
>pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: reg 10: [io  0xec00-0xec07]
>pci 0000:00:1f.2: reg 14: [io  0xe880-0xe883]
>pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
>pci 0000:00:1f.2: reg 1c: [io  0xe480-0xe483]
>pci 0000:00:1f.2: reg 20: [io  0xe400-0xe41f]
>pci 0000:00:1f.2: reg 24: [mem 0xfebff800-0xfebfffff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
>pci 0000:01:00.0: reg 14: [io  0x9000-0x90ff]
>pci 0000:01:00.0: reg 18: [mem 0xfddf0000-0xfddfffff]
>pci 0000:01:00.0: reg 30: [mem 0xfddc0000-0xfdddffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x7000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:01.0:   bridge window [mem 0xdbc00000-0xfbbfffff 64bit pref]
>pci 0000:02:00.0: reg 10: [mem 0xfdec0000-0xfdefffff 64bit]
>pci 0000:02:00.0: reg 30: [mem 0xfdea0000-0xfdebffff pref]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:03:00.0: reg 10: [mem 0xfdffe000-0xfdffffff 64bit]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:04:00.0: reg 10: [io  0xac00-0xac07]
>pci 0000:04:00.0: reg 14: [io  0xa880-0xa883]
>pci 0000:04:00.0: reg 18: [io  0xa800-0xa807]
>pci 0000:04:00.0: reg 1c: [io  0xa480-0xa483]
>pci 0000:04:00.0: reg 20: [io  0xa400-0xa40f]
>pci 0000:04:00.0: reg 24: [mem 0xfe0fe000-0xfe0fffff]
>pci 0000:04:00.0: PME# supported from D3hot
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:1c.2: PCI bridge to [bus 04-04]
>pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
>pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfe0fffff]
>pci 0000:00:1c.3: PCI bridge to [bus 05-05]
>pci 0000:00:1c.4: PCI bridge to [bus 06-07]
>pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.4:   bridge window [mem 0xfe100000-0xfe8fffff]
>pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfdbfffff 64bit pref]
>pci 0000:08:00.0: reg 10: [mem 0xfe9ffc00-0xfe9fffff]
>pci 0000:08:00.0: reg 18: [io  0xcc00-0xcc7f]
>pci 0000:08:00.0: reg 30: [mem 0xfe9e0000-0xfe9effff pref]
>pci 0000:00:1c.5: PCI bridge to [bus 08-08]
>pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:09:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
>pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:09:01.0: PME# disabled
>pci 0000:09:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
>pci 0000:09:01.1: supports D1 D2
>pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.1: PME# disabled
>pci 0000:09:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff]
>pci 0000:09:01.2: supports D1 D2
>pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.2: PME# disabled
>pci 0000:09:01.3: reg 10: [mem 0xfeafec00-0xfeafecff]
>pci 0000:09:01.3: supports D1 D2
>pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.3: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:08: [io  0x04d0-0x04d1] has been reserved
>system 00:08: [io  0x0800-0x087f] has been reserved
>system 00:08: [io  0x0400-0x041f] has been reserved
>system 00:08: [io  0x0500-0x053f] has been reserved
>system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
>system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0a: [io  0x0250-0x0253] has been reserved
>system 00:0a: [io  0x0256-0x025f] has been reserved
>system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: [mem 0xc0000000-0xcfffffff] has been reserved
>system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
>system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
>pci 0000:00:1c.5: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x7000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:01.0:   bridge window [mem 0xdbc00000-0xfbbfffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  disabled]
>pci 0000:00:1c.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:1c.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  disabled]
>pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:1c.1:   bridge window [mem pref disabled]
>pci 0000:00:1c.2: PCI bridge to [bus 04-04]
>pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
>pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfe0fffff]
>pci 0000:00:1c.2:   bridge window [mem pref disabled]
>pci 0000:00:1c.3: PCI bridge to [bus 05-05]
>pci 0000:00:1c.3:   bridge window [io  disabled]
>pci 0000:00:1c.3:   bridge window [mem disabled]
>pci 0000:00:1c.3:   bridge window [mem pref disabled]
>pci 0000:00:1c.4: PCI bridge to [bus 06-07]
>pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.4:   bridge window [mem 0xfe100000-0xfe8fffff]
>pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfdbfffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 08-08]
>pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 09-09]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 [io  0x7000-0x9fff]
>pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:01: resource 2 [mem 0xdbc00000-0xfbbfffff 64bit pref]
>pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe0fffff]
>pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe8fffff]
>pci_bus 0000:06: resource 2 [mem 0xfbc00000-0xfdbfffff 64bit pref]
>pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:08: resource 1 [mem 0xfe900000-0xfe9fffff]
>pci_bus 0000:08: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
>pci_bus 0000:09: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:09: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:09: resource 4 [mem 0x00000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 2460k freed
>Simple Boot Flag at 0x52 set to 0x1
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1267891156.399:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 4017
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>PM: Resume from disk failed.
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 484k freed
>[drm] Initialized drm 1.1.0 20060810
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDDF0000
>[drm] register mmio size: 65536
>ATOM BIOS: ASUS_F3Sa
>[drm] Clocks initialized !
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 1028762 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:01:00.0: irq 31 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV630 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RV630_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RV630_me.bin
>platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Default TV standard: PAL
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   DVI-D
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
>[drm] Connector 2:
>[drm]   LVDS
>[drm]   DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVTM1
>[drm] Connector 3:
>[drm]   DIN
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_KLDSCP_DAC2
>[drm] fb mappable at 0xE0141000
>[drm] vram apper at 0xE0000000
>[drm] size 7257600
>[drm] fb depth is 24
>[drm]    pitch is 6912
>Console: switching to colour frame buffer device 180x56
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 32
>ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 32
>ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 32
>ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ahci 0000:04:00.0: setting latency timer to 64
>scsi3 : ahci
>ata4: SATA max UDMA/133 abar m8192@0xfe0fe000 port 0xfe0fe100 irq 18
>pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pata_acpi 0000:00:1f.1: setting latency timer to 64
>pata_acpi 0000:00:1f.1: PCI INT A disabled
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST9160821AS      3.AL PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata6: port disabled. ignoring.
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NR02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>EXT4-fs (sda3): mounted filesystem with ordered data mode
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>udev: starting version 151
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp 0000:00:01.0:pcie04: Bypassing BIOS check for pciehp use on 0000:00:01.0
>pciehp 0000:00:01.0:pcie04: HPC vendor_id 8086 device_id 2a01 ss_vid 8086 ss_did 2a01
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>iTCO_vendor_support: vendor-support=0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>pciehp 0000:00:01.0:pcie04: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
>pciehp 0000:00:01.0:pcie04: Cannot add device at 0000:01:00
>pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.4:pcie04: Bypassing BIOS check for pciehp use on 0000:00:1c.4
>pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2847 ss_vid 1043 ss_did 14e7
>pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.5:pcie04: Bypassing BIOS check for pciehp use on 0000:00:1c.5
>pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 2849 ss_vid 1043 ss_did 14e7
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
>atl1 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>atl1 0000:02:00.0: setting latency timer to 64
>atl1 0000:02:00.0: version 2.1.3
>ACPI: SSDT 000000007ffb63a0 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: SSDT 000000007ffb66c0 00712 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (69 C)
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>uhci_hcd: USB Universal Host Controller Interface driver
>Monitor-Mwait will be used to enter C-1 state
>ACPI: AC Adapter [AC0] (on-line)
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
>ACPI: Sleep Button [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
>ACPI: Lid Switch [LID]
>Monitor-Mwait will be used to enter C-2 state
>Marking TSC unstable due to TSC halts in idle
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button [PWRF]
>ACPI: SSDT 000000007ffb62d0 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
>ACPI: SSDT 000000007ffb6630 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
>pciehp 0000:00:1c.5:pcie04: Device 0000:08:00.0 already exists at 0000:08:00, cannot hot-add
>pciehp 0000:00:1c.5:pcie04: Cannot add device at 0000:08:00
>pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>Switching to clocksource hpet
>ACPI: Battery Slot [BAT0] (battery present)
>asus_laptop: Asus Laptop Support version 0.42
>asus_laptop:   F3Sa model detected
>input: Asus Laptop extra buttons as /devices/virtual/input/input6
>Registered led device: asus::mail
>asus_laptop: Brightness ignored, must be controlled by ACPI video driver
>firewire_ohci 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>cfg80211: Calling CRDA to update world regulatory domain
>acpi device:1e: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI version 1.0
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
>sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>loop: module loaded
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
>firewire_core: created device fw0: GUID 00e0180003b1886e, S400
>fuse init (API version 7.13)
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>usb 7-1: new full speed USB device using uhci_hcd and address 2
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usb 2-1.1: new low speed USB device using ehci_hcd and address 6
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>USB Serial support registered for pl2303
>pl2303 6-2:1.0: pl2303 converter detected
>usb 6-2: pl2303 converter now attached to ttyUSB0
>usbcore: registered new interface driver pl2303
>pl2303: Prolific PL2303 USB to serial adaptor driver
>usbcore: registered new interface driver hiddev
>input: USB Mouse               as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input10
>generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.7-1.1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
>Intel AES-NI instructions are not detected.
>padlock: VIA PadLock not detected.
>EXT4-fs (sda2): mounted filesystem with ordered data mode
>EXT4-fs (sda1): mounted filesystem without journal
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sda6
>Ending clean XFS mount for filesystem: sda6
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>atl1 0000:02:00.0: irq 35 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>atl1 0000:02:00.0: irq 35 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>alg: No test for lrw(twofish) (lrw(twofish-generic))
>device-mapper: ioctl: unable to remove open device temporary-cryptsetup-4283
>device-mapper: ioctl: unable to remove open device temporary-cryptsetup-4283
>EXT4-fs (dm-1): warning: maximal mount count reached, running e2fsck is recommended
>EXT4-fs (dm-1): mounted filesystem with ordered data mode
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold

Actions: View

Attachments on bug 25741: 32218 | 32219 | 32220 | 32221 | 32222 | 32223 | 32230 | 32336 | 32509 | 33815 | 33816 | 33817 | 33870

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.