Attachment 33925 Details for Bug 27000 – dmesg

dmesg

mesg (text/plain), 38.90 KB, created by mehmet.giritli on 2010-03-10 13:23:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mehmet.giritli

Created: 2010-03-10 13:23:46 UTC

Size: 38.90 KB

patch

obsolete

>Linux version 2.6.33-gentoo (root@mordor) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #5 SMP Tue Mar 2 03:35:32 EET 2010
>Command line: root=/dev/sda2 radeon.modeset=1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
> BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
> BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
> BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
> BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>No AGP bridge found
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 base 000080000000 mask FFFFC0000000 write-back
>  2 base 0000C0000000 mask FFFFF0000000 write-back
>  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
>  4 base 000100000000 mask FFFFE0000000 write-back
>  5 base 000120000000 mask FFFFF0000000 write-back
>  6 disabled
>  7 disabled
>TOM2: 0000000130000000 aka 4864M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 256MB, type WB
>reg 3, base: 3326MB, range: 2MB, type UC
>reg 4, base: 4GB, range: 512MB, type WB
>reg 5, base: 4608MB, range: 256MB, type WB
>total RAM covered: 3326M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 256MB, type WB
>reg 3, base: 3326MB, range: 2MB, type UC
>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000cfd81000
> 0000000000 - 00c0000000 page 1G
> 00c0000000 - 00cfc00000 page 2M
> 00cfc00000 - 00cfd81000 page 4k
>kernel direct mapping tables up to cfd81000 @ 8000-b000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ a000-c000
>ACPI: RSDP 00000000000f6130 00014 (v00 GBT   )
>ACPI: RSDT 00000000cfde3000 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000cfde30c0 0683E (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000cfde0000 00040
>ACPI: SSDT 00000000cfde99c0 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000cfdea280 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000cfdea2c0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: TAMG 00000000cfdea300 0039A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>ACPI: APIC 00000000cfde9900 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>(8 early reservations) ==> bootmem [0000000000 - 0130000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 000183ff04]    TEXT DATA BSS ==> [0001000000 - 000183ff04]
>  #2 [0000098400 - 0000100000]    BIOS reserved ==> [0000098400 - 0000100000]
>  #3 [0001840000 - 00018400fe]              BRK ==> [0001840000 - 00018400fe]
>  #4 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
>  #5 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>  #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x00000098
>    0: 0x00000100 -> 0x000cfd81
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1047833
>  DMA zone: 56 pages used for memmap
>  DMA zone: 113 pages reserved
>  DMA zone: 3823 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 832953 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000098000 - 0000000000099000
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
>PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
>PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
>PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880028200000 s77464 r8192 d20840 u524288
>pcpu-alloc: s77464 r8192 d20840 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030696
>Kernel command line: root=/dev/sda2 radeon.modeset=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 804000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>PM: Registered nosave memory: 0000000020000000 - 0000000024000000
>Memory: 3984284k/4980736k available (4359k kernel code, 789404k absent, 206128k reserved, 2591k data, 420k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:2304
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3113.953 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6227.89 BogoMIPS (lpj=3113949)
>Mount-cache hash table entries: 256
>tseg: 00cfe00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using C1E aware idle routine
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>ACPI: Core revision 20091214
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X4 B50 Processor stepping 02
>Booting Node   0, Processors  #1 #2 #3 Ok.
>Brought up 4 CPUs
>Total of 4 processors activated (24911.09 BogoMIPS).
>NET: Registered protocol family 16
>node 0 link 0: io port [8000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e07fffff] ==> [e0100000, e07fffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00, 07] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [d0000000, dfffffff]
>bus: 00 index 3 mmio: [e0800000, ffffffff]
>bus: 00 index 4 mmio: [e0100000, e07fffff]
>bus: 00 index 5 mmio: [130000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfed0ffff] (ignored)
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xfdde0000-0xfddeffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xee00-0xeeff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: reg 10: [mem 0xfdcfe000-0xfdcfffff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:04.0: PCI bridge to [bus 02-02]
>pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:03:00.0: reg 10: [io  0xcf00-0xcf07]
>pci 0000:03:00.0: reg 14: [io  0xce00-0xce03]
>pci 0000:03:00.0: reg 18: [io  0xcd00-0xcd07]
>pci 0000:03:00.0: reg 1c: [io  0xcc00-0xcc03]
>pci 0000:03:00.0: reg 20: [io  0xcb00-0xcb0f]
>pci 0000:03:00.0: reg 24: [mem 0xfdaff000-0xfdaff7ff]
>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:03:00.0: PME# supported from D3hot
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:05.0: PCI bridge to [bus 03-03]
>pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:05.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:04:00.0: reg 10: [io  0xbe00-0xbeff]
>pci 0000:04:00.0: reg 18: [mem 0xfd7ff000-0xfd7fffff 64bit pref]
>pci 0000:04:00.0: reg 20: [mem 0xfd7f8000-0xfd7fbfff 64bit pref]
>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:07.0: PCI bridge to [bus 04-04]
>pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:07.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:07.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci 0000:05:00.0: reg 10: [io  0xae00-0xaeff]
>pci 0000:05:00.0: reg 18: [mem 0xfd3ff000-0xfd3fffff 64bit pref]
>pci 0000:05:00.0: reg 20: [mem 0xfd3f8000-0xfd3fbfff 64bit pref]
>pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.0: PME# disabled
>pci 0000:00:09.0: PCI bridge to [bus 05-05]
>pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:09.0:   bridge window [mem 0xfd600000-0xfd6fffff]
>pci 0000:00:09.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci 0000:06:00.0: reg 24: [mem 0xfdffe000-0xfdffffff]
>pci 0000:06:00.0: PME# supported from D3hot
>pci 0000:06:00.0: PME# disabled
>pci 0000:06:00.1: reg 10: [io  0x9f00-0x9f07]
>pci 0000:06:00.1: reg 14: [io  0x9e00-0x9e03]
>pci 0000:06:00.1: reg 18: [io  0x9d00-0x9d07]
>pci 0000:06:00.1: reg 1c: [io  0x9c00-0x9c03]
>pci 0000:06:00.1: reg 20: [io  0x9b00-0x9b0f]
>pci 0000:00:0a.0: PCI bridge to [bus 06-06]
>pci 0000:00:0a.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:07:0e.0: reg 10: [mem 0xfd5ff000-0xfd5ff7ff]
>pci 0000:07:0e.0: reg 14: [mem 0xfd5f8000-0xfd5fbfff]
>pci 0000:07:0e.0: supports D1 D2
>pci 0000:07:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:07:0e.0: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:14.4:   bridge window [mem 0xfd500000-0xfd5fffff]
>pci 0000:00:14.4:   bridge window [mem 0xfd400000-0xfd4fffff pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] already in use
>pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0b: disabling [mem 0x000d7400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:02: [io  0x4100-0x411f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x4000-0x40fe] has been reserved
>system 00:02: [io  0x4210-0x4217] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0b: [mem 0xcfde0000-0xcfdfffff] could not be reserved
>system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:04.0: PCI bridge to [bus 02-02]
>pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
>pci 0000:00:05.0: PCI bridge to [bus 03-03]
>pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:05.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:04:00.0: BAR 6: assigned [mem 0xfd700000-0xfd71ffff pref]
>pci 0000:00:07.0: PCI bridge to [bus 04-04]
>pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:07.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:07.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci 0000:05:00.0: BAR 6: assigned [mem 0xfd300000-0xfd31ffff pref]
>pci 0000:00:09.0: PCI bridge to [bus 05-05]
>pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:09.0:   bridge window [mem 0xfd600000-0xfd6fffff]
>pci 0000:00:09.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci 0000:00:0a.0: PCI bridge to [bus 06-06]
>pci 0000:00:0a.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 07-07]
>pci 0000:00:14.4:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:14.4:   bridge window [mem 0xfd500000-0xfd5fffff]
>pci 0000:00:14.4:   bridge window [mem 0xfd400000-0xfd4fffff pref]
>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:0a.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdafffff]
>pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfd8fffff]
>pci_bus 0000:04: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:05: resource 1 [mem 0xfd600000-0xfd6fffff]
>pci_bus 0000:05: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:06: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:06: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
>pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
>pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff pref]
>pci_bus 0000:07: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:07: resource 4 [mem 0x00000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>microcode: CPU0: patch_level=0x1000086
>microcode: CPU1: patch_level=0x1000086
>microcode: CPU2: patch_level=0x1000086
>microcode: CPU3: patch_level=0x1000086
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>EXT4-fs: Unable to register as ext3 (-16)
>msgmni has been set to 7912
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:02.0: setting latency timer to 64
>pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:04.0: setting latency timer to 64
>pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:05.0: setting latency timer to 64
>pcieport 0000:00:05.0: irq 26 for MSI/MSI-X
>pcieport 0000:00:07.0: setting latency timer to 64
>pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
>pcieport 0000:00:09.0: setting latency timer to 64
>pcieport 0000:00:09.0: irq 28 for MSI/MSI-X
>pcieport 0000:00:0a.0: setting latency timer to 64
>pcieport 0000:00:0a.0: irq 29 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDDE0000
>[drm] register mmio size: 65536
>ATOM BIOS: 954F.11.22.6.0.AS03
>[drm] Clocks initialized !
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 64bits DDR
>[TTM] Zone  kernel: Available graphics memory: 2025578 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:01:00.0: irq 30 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV710 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/RV710_pfp.bin
>platform radeon_cp.0: firmware: using built-in firmware radeon/RV710_me.bin
>platform radeon_cp.0: firmware: using built-in firmware radeon/R700_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   HDMI-A
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm] Connector 1:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD4
>[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] fb mappable at 0xD0141000
>[drm] vram apper at 0xD0000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>Console: switching to colour frame buffer device 160x64
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>brd: module loaded
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
>ahci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:03:00.0: irq 31 for MSI/MSI-X
>ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pio 
>ahci 0000:03:00.0: setting latency timer to 64
>scsi6 : ahci
>scsi7 : ahci
>scsi8 : ahci
>scsi9 : ahci
>scsi10 : ahci
>scsi11 : ahci
>scsi12 : ahci
>scsi13 : ahci
>ata7: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff100 irq 31
>ata8: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff180 irq 31
>ata9: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff200 irq 31
>ata10: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff280 irq 31
>ata11: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff300 irq 31
>ata12: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff380 irq 31
>ata13: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff400 irq 31
>ata14: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff480 irq 31
>ahci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ahci 0000:06:00.0: setting latency timer to 64
>scsi14 : ahci
>scsi15 : ahci
>ata15: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18
>ata16: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>r8169 0000:04:00.0: setting latency timer to 64
>r8169 0000:04:00.0: irq 32 for MSI/MSI-X
>eth0: RTL8168d/8111d at 0xffffc90000076000, 00:24:1d:ca:75:7b, XID 083000c0 IRQ 32
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:05:00.0: setting latency timer to 64
>r8169 0000:05:00.0: irq 33 for MSI/MSI-X
>eth1: RTL8168d/8111d at 0xffffc9000007c000, 00:24:1d:ca:75:2b, XID 083000c0 IRQ 33
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-8: ST3500418AS, CC37, max UDMA/133
>ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB02, max UDMA/100
>ata6.00: ATA-8: ST31000340AS, SD15, max UDMA/133
>ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>ata2.00: ATAPI: ASUS    DRW-24B1ST, 1.03, max UDMA/100, ATAPI AN
>ata1.00: configured for UDMA/100
>ata2.00: configured for UDMA/100
>ata6.00: configured for UDMA/133
>ata7: SATA link down (SStatus 0 SControl 300)
>ata9: SATA link down (SStatus 0 SControl 300)
>ata10: SATA link down (SStatus 0 SControl 300)
>ata12: SATA link down (SStatus 0 SControl 300)
>ata11: SATA link down (SStatus 0 SControl 300)
>ata14: SATA link up <unknown> (SStatus FFFFFF93 SControl 300)
>ata13: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
>ata14.00: configured for UDMA/66
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
>ata2: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0 t4
>ata2: irq_stat 0x40000008
>scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>ata16: SATA link down (SStatus 0 SControl 300)
>ata15: SATA link down (SStatus 0 SControl 300)
>scsi 1:0:0:0: CD-ROM            ASUS     DRW-24B1ST       1.03 PQ: 0 ANSI: 5
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:0:0: Attached scsi CD-ROM sr1
>scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC37 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>scsi 5:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>sd 3:0:0:0: [sda] Write Protect is off
>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
>scsi 13:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 <
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
> sdb1 sdb2 <
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
> sda5 sda6 sdb5 sdb6 sda7 >
>sd 3:0:0:0: [sda] Attached SCSI disk
> sdb7
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
> sdb8
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
> sdb9
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>it87: Found IT8720F chip at 0x228, revision 8
>it87: in3 is VCC (+5V)
>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
> sdb10
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> sdb11 sdb12 sdb13 >
>sd 5:0:0:0: [sdb] Attached SCSI disk
>hda_codec: ALC889: BIOS auto-probing.
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:00.1: irq 34 for MSI/MSI-X
>HDA Intel 0000:01:00.1: setting latency timer to 64
>ALSA device list:
>  #0: HDA ATI SB at 0xfe024000 irq 16
>  #1: HDA ATI HDMI at 0xfddfc000 irq 34
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Phenom(tm) II X4 B50 Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (3100 MHz)
>powernow-k8:    1 : pstate 1 (2400 MHz)
>powernow-k8:    2 : pstate 2 (1900 MHz)
>powernow-k8:    3 : pstate 3 (800 MHz)
>rtc_cmos 00:05: setting system clock to 2010-03-08 22:00:43 UTC (1268085643)
>EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
>EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>EXT4-fs (sda2): write access will be enabled during recovery
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>usb 6-1: new low speed USB device using ohci_hcd and address 2
>input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input3
>generic-usb 0003:045E:00CB.0001: input: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:13.1-1/input0
>EXT4-fs (sda2): recovery complete
>EXT4-fs (sda2): mounted filesystem with ordered data mode
>VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 420k freed
>udev: starting version 146
>firewire_ohci 0000:07:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>firewire_ohci: Added fw-ohci device 0000:07:0e.0, OHCI version 1.10
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>firewire_core: created device fw0: GUID 0059e91a006cf049, S400
>EXT4-fs (sda3): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-2): using internal journal
>EXT3-fs (dm-2): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-1): using internal journal
>EXT3-fs (dm-1): mounted filesystem with writeback data mode
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>EXT4-fs (sda6): mounted filesystem with ordered data mode
>EXT4-fs (sda7): mounted filesystem with ordered data mode
>Adding 1951856k swap on /dev/sda5.  Priority:-1 extents:1 across:1951856k 
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>r8169: eth0: link up
>r8169: eth0: link up
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>svc: failed to register lockdv1 RPC service (errno 97).
>eth0: no IPv6 routers present
>Disabling lock debugging due to kernel taint
>Machine check events logged

Actions: View

Attachments on bug 27000: 33925 | 33926

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.