Attachment 34264 Details for Bug 27206 – dmesg from garbled screen

dmesg from garbled screen

dmesg1.txt (text/plain), 44.34 KB, created by DF5JT on 2010-03-20 12:36:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: DF5JT

Created: 2010-03-20 12:36:38 UTC

Size: 44.34 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.33 (root@klapprechner.ratzix.de) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #4 SMP Sat Mar 20 11:12:37 CET 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
> BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI data)
> BIOS-e820: 00000000bfedf000 - 00000000bff00000 (ACPI NVS)
> BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI present.
>last_pfn = 0xbfed0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DBFFF uncachable
>  DC000-DFFFF write-back
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0BFF00000 mask FFFF00000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3071MB, range: 1MB, type UC
>total RAM covered: 3071M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 2M 	num_reg: 3  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3071MB, range: 1MB, type UC
>initial memory mapped : 0 - 01000000
>found SMP MP-table at [c00f6810] f6810
>init_memory_mapping: 0000000000000000-00000000373fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 328e3000 - 37fefe49
>Allocated new RAMDISK: 00b28000 - 06234e49
>Move RAMDISK from 00000000328e3000 - 0000000037fefe48 to 00b28000 - 06234e48
>ACPI: RSDP 000f67e0 00024 (v02 LENOVO)
>ACPI: XSDT bfed14a0 00084 (v01 LENOVO TP-79    00002250  LTP 00000000)
>ACPI: FACP bfed1600 000F4 (v03 LENOVO TP-79    00002250 LNVO 00000001)
>ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20091214/tbfadt-526)
>ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20091214/tbfadt-557)
>ACPI: DSDT bfed195e 0D467 (v01 LENOVO TP-79    00002250 MSFT 0100000E)
>ACPI: FACS bfef4000 00040
>ACPI: SSDT bfed17b4 001AA (v01 LENOVO TP-79    00002250 MSFT 0100000E)
>ACPI: ECDT bfededc5 00052 (v01 LENOVO TP-79    00002250 LNVO 00000001)
>ACPI: TCPA bfedee17 00032 (v02 LENOVO TP-79    00002250 LNVO 00000001)
>ACPI: APIC bfedee49 00068 (v01 LENOVO TP-79    00002250 LNVO 00000001)
>ACPI: MCFG bfedeeb1 0003C (v01 LENOVO TP-79    00002250 LNVO 00000001)
>ACPI: HPET bfedeeed 00038 (v01 LENOVO TP-79    00002250 LNVO 00000001)
>ACPI: BOOT bfedefd8 00028 (v01 LENOVO TP-79    00002250  LTP 00000001)
>ACPI: SSDT bfef2655 0025F (v01 LENOVO TP-79    00002250 INTL 20050513)
>ACPI: SSDT bfef28b4 000A6 (v01 LENOVO TP-79    00002250 INTL 20050513)
>ACPI: SSDT bfef295a 004F7 (v01 LENOVO TP-79    00002250 INTL 20050513)
>ACPI: SSDT bfef2e51 001D8 (v01 LENOVO TP-79    00002250 INTL 20050513)
>ACPI: Local APIC address 0xfee00000
>2186MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 0000a000 - 00010e80
>(14 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000400000 - 0000b22434]    TEXT DATA BSS ==> [0000400000 - 0000b22434]
>  #3 [0000b23000 - 0000b27138]              BRK ==> [0000b23000 - 0000b27138]
>  #4 [00000f6820 - 0000100000]    BIOS reserved ==> [00000f6820 - 0000100000]
>  #5 [00000f6810 - 00000f6820]     MP-table mpf ==> [00000f6810 - 00000f6820]
>  #6 [000009f000 - 000009f4a1]    BIOS reserved ==> [000009f000 - 000009f4a1]
>  #7 [000009f5bd - 00000f6810]    BIOS reserved ==> [000009f5bd - 00000f6810]
>  #8 [000009f4a1 - 000009f5bd]     MP-table mpc ==> [000009f4a1 - 000009f5bd]
>  #9 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
>  #10 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
>  #11 [0000007000 - 000000a000]          PGTABLE ==> [0000007000 - 000000a000]
>  #12 [0000b28000 - 0006234e49]      NEW RAMDISK ==> [0000b28000 - 0006234e49]
>  #13 [000000a000 - 0000011000]          BOOTMAP ==> [000000a000 - 0000011000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x000bfed0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x000bfed0
>On node 0 totalpages: 786031
>free_area_init_node: node 0, pgdat c09a9a40, node_mem_map c6236000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 4374 pages used for memmap
>  HighMem zone: 555452 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @c7c00000 s34712 r0 d22632 u2097152
>pcpu-alloc: s34712 r0 d22632 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 779889
>Kernel command line: ro root=UUID=d3b1b7cd-adb0-4e33-aba2-1d9237bb0d8d noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de rhgb dynpm=1 radeon.new_pll=0
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 15722560 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000373fe:000bfed0)
>Memory: 3005632k/3144512k available (3611k kernel code, 137412k reserved, 2320k data, 548k init, 2239304k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc09cb000 - 0xc0a54000   ( 548 kB)
>      .data : 0xc0786d88 - 0xc09caf20   (2320 kB)
>      .text : 0xc0400000 - 0xc0786d88   (3611 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1828.792 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.58 BogoMIPS (lpj=1828792)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 21486 entries in 43 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 02
>Booting Node   0, Processors  #1 Ok.
>Initializing CPU#1
>TSC synchronization [CPU#0 -> CPU#1]:
>Measured 566038 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (7314.92 BogoMIPS).
>regulator: core version 0.5
>Time: 19:29:19  Date: 03/20/10
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [PUBS] (on)
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xee400000-0xee403fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
>pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
>pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
>pci 0000:00:1d.7: reg 10: [mem 0xee404000-0xee4043ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
>pci 0000:00:1f.2: reg 10: [io  0x18c8-0x18cf]
>pci 0000:00:1f.2: reg 14: [io  0x18ac-0x18af]
>pci 0000:00:1f.2: reg 18: [io  0x18c0-0x18c7]
>pci 0000:00:1f.2: reg 1c: [io  0x18a8-0x18ab]
>pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
>pci 0000:00:1f.2: reg 24: [mem 0xee404400-0xee4047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
>pci 0000:01:00.0: reg 18: [mem 0xee100000-0xee10ffff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xee100000-0xee1fffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
>pci 0000:02:00.0: reg 18: [io  0x3000-0x301f]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xee0fffff]
>pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  0x4000-0x5fff]
>pci 0000:00:1c.1:   bridge window [mem 0xec000000-0xedffffff]
>pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>pci 0000:00:1c.2:   bridge window [io  0x6000-0x7fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe8000000-0xe9ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
>pci 0000:00:1c.3:   bridge window [io  0x8000-0x9fff]
>pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xebffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
>pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
>pci 0000:15:00.0: supports D1 D2
>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xa000-0xdfff]
>pci 0000:00:1e.0:   bridge window [mem 0xe4300000-0xe7ffffff]
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
>system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
>system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
>system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
>system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
>system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
>system 00:02: [io  0x164e-0x164f] has been reserved
>system 00:02: [io  0x1000-0x107f] has been reserved
>system 00:02: [io  0x1180-0x11bf] has been reserved
>system 00:02: [io  0x0800-0x080f] has been reserved
>system 00:02: [io  0x15e0-0x15ef] has been reserved
>system 00:02: [io  0x1600-0x165f] could not be reserved
>system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
>system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
>pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xee100000-0xee1fffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xee0fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  0x4000-0x5fff]
>pci 0000:00:1c.1:   bridge window [mem 0xec000000-0xedffffff]
>pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>pci 0000:00:1c.2:   bridge window [io  0x6000-0x7fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe8000000-0xe9ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
>pci 0000:00:1c.3:   bridge window [io  0x8000-0x9fff]
>pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xebffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
>pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
>pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
>pci 0000:15:00.0: BAR 13: assigned [io  0xa000-0xa0ff]
>pci 0000:15:00.0: BAR 14: assigned [io  0xa400-0xa4ff]
>pci 0000:15:00.0: CardBus bridge to [bus 16-17]
>pci 0000:15:00.0:   bridge window [io  0xa000-0xa0ff]
>pci 0000:15:00.0:   bridge window [io  0xa400-0xa4ff]
>pci 0000:15:00.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
>pci 0000:15:00.0:   bridge window [mem 0xc4000000-0xc7ffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 15-18]
>pci 0000:00:1e.0:   bridge window [io  0xa000-0xdfff]
>pci 0000:00:1e.0:   bridge window [mem 0xe4300000-0xe7ffffff]
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
>pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x4000-0x5fff]
>pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
>pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x6000-0x7fff]
>pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
>pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
>pci_bus 0000:0c: resource 0 [io  0x8000-0x9fff]
>pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
>pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
>pci_bus 0000:15: resource 0 [io  0xa000-0xdfff]
>pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
>pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
>pci_bus 0000:15: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:15: resource 4 [mem 0x00000000-0xffffffff]
>pci_bus 0000:16: resource 0 [io  0xa000-0xa0ff]
>pci_bus 0000:16: resource 1 [io  0xa400-0xa4ff]
>pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
>pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS mismatch (64 != 32), using 64 bytes
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 89139k freed
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1269113361.282:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1672
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 17aa ss_did 2011
>pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 17aa ss_did 2011
>pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 17aa ss_did 2011
>pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 17aa ss_did 2011
>pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: Slot 1 already registered by another hotplug driver
>acpiphp_glue: Slot 1 already registered by another hotplug driver
>pci-stub: invalid id string ""
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: SSDT bfef1d36 00240 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
>ACPI: SSDT bfef1ffb 0065A (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: SSDT bfef1c6e 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
>ACPI: SSDT bfef1f76 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (55 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (56 C)
>isapnp: Scanning for PnP cards...
>ACPI: Battery Slot [BAT0] (battery present)
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>tpm_tis 00:0a: 1.2 TPM (device-id 0x3202, rev-id 5)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ata6: port disabled. ignoring.
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.33 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.33 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.33 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.33 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.33 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>usbhid: USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 2:426:496
>rtc_cmos 00:07: setting system clock to 2010-03-20 19:29:23 UTC (1269113363)
>Initalizing network drop monitor service
>psmouse serio1: ID: 10 00 64
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: New USB device found, idVendor=14aa, idProduct=0222
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: ST9500325AS, 0002BSM1, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>ata1.00: configured for UDMA/133
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0002 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 548k freed
>Write protecting the kernel text: 3612k
>Write protecting the kernel read-only data: 1756k
>dracut: dracut-004-4.fc12
>udev: starting version 145
>usb 2-2: New USB device found, idVendor=046d, idProduct=c51b
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: USB Receiver
>usb 2-2: Manufacturer: Logitech
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
>generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
>[drm] Initialized drm 1.1.0 20060810
>generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: power state changed by ACPI to D0
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xEE100000
>[drm] register mmio size: 65536
>ATOM BIOS: Lenovo
>[drm] 5 Power State(s)
>[drm] State 0 Battery 
>[drm] 	1 PCIE Lanes
>[drm] 	Single display only
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine/memory: 129000/135000
>[drm] State 1 Battery 
>[drm] 	1 PCIE Lanes
>[drm] 	Single display only
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine/memory: 210000/135000
>[drm] State 2 Powersave 
>[drm] 	1 PCIE Lanes
>[drm] 	Single display only
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine/memory: 324000/135000
>[drm] State 3 Default 
>[drm] 	16 PCIE Lanes
>[drm] 	Single display only
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine/memory: 350000/330000
>[drm] State 4 Default (default)
>[drm] 	16 PCIE Lanes
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine/memory: 400000/330000
>[drm] radeon: dynamic power management enabled
>[drm] radeon: power management initialized
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
>radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
>radeon 0000:01:00.0: irq 30 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 428546 kiB.
>[TTM] Zone highmem: Available graphics memory: 1548198 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: 1 quad pipes, 2 z pipes initialized.
>[drm] PCIE GART of 512M enabled (table at 0x00040000).
>[drm] Loading R500 Microcode
>platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
>[drm] radeon: ring at 0x0000000010000000
>[drm] ring test succeeded in 4 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVTM1
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
>[drm] Requested: e: 12900 m: 13500 p: 1
>[drm] Setting: p: 1
>Uhhuh. NMI received for unknown reason a1 on CPU 0.
>You have some hardware problem, likely on the PCI bus.
>Dazed and confused, but trying to continue
>[drm] Setting: e: 12900
>[drm] Setting: m: 13500
>[drm] fb mappable at 0xD00C0000
>[drm] vram apper at 0xD0000000
>[drm] size 7680000
>[drm] fb depth is 24
>[drm]    pitch is 6400
>fbcon: radeondrmfb (fb0) is primary device
>[drm] Requested: e: 21000 m: 13500 p: 1
>[drm] Setting: e: 21000
>Console: switching to colour frame buffer device 200x75
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.1.0 20080528 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
>[drm] Requested: e: 12900 m: 13500 p: 1
>[drm] Setting: e: 12900
>acpi device:05: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input7
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>[drm] Requested: e: 12900 m: 13500 p: 1
>device-mapper: multipath: version 1.1.1 loaded
>EXT4-fs (sda3): INFO: recovery required on readonly filesystem
>EXT4-fs (sda3): write access will be enabled during recovery
>EXT4-fs (sda3): recovery complete
>EXT4-fs (sda3): mounted filesystem with ordered data mode
>dracut: Remounting /dev/disk/by-uuid/d3b1b7cd-adb0-4e33-aba2-1d9237bb0d8d with -o ro,defaults,noatime,relatime
>EXT4-fs (sda3): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/sda3
>dracut: Switching root
>udev: starting version 145
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
>e1000e 0000:02:00.0: Disabling L1 ASPM
>e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>e1000e 0000:02:00.0: setting latency timer to 64
>e1000e 0000:02:00.0: irq 31 for MSI/MSI-X
>e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
>0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:2f:eb:a7
>0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
>cfg80211: Calling CRDA to update world regulatory domain
>thinkpad_acpi: ThinkPad ACPI Extras v0.24
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 79ETE5WW (2.25 ), EC 79HT50WW-1.07
>thinkpad_acpi: Lenovo ThinkPad T60p, model 2008WYN
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi::standby
>Registered led device: tpacpi::thinkvantage
>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
>thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
>input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
>dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in cold state, will try to load a firmware
>usb 1-1: firmware: requesting dvb-usb-wt220u-02.fw
>dvb-usb: downloading firmware from file 'dvb-usb-wt220u-02.fw'
>usbcore: registered new interface driver dvb_usb_dtt200u
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-kds
>iwl3945: Copyright(c) 2003-2009 Intel Corporation
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: setting latency timer to 64
>iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
>cfg80211: World regulatory domain updated:
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>usb 1-1: USB disconnect, address 2
>dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:2010
>HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>cfg80211: Calling CRDA for country: DE
>cfg80211: Regulatory domain changed to country: DE
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>    (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>    (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
>usb 1-1: new high speed USB device using ehci_hcd and address 4
>usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 189
>usb 1-1: New USB device found, idVendor=14aa, idProduct=0221
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: Digital TV Receiver
>usb 1-1: Manufacturer: Digital TV Receiver
>dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in warm state.
>dvb-usb: will use the device's hardware PID filter (table count: 15).
>DVB: registering new adapter (WideView WT-220U PenType Receiver (Typhoon/Freecom))
>DVB: registering adapter 0 frontend 0 (WideView USB DVB-T)...
>input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input11
>dvb-usb: schedule remote query interval to 300 msecs.
>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.
>dvb-usb: recv bulk message failed: -110
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): using internal journal
>EXT3-fs (sda5): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with ordered data mode
>microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x57
>platform microcode: firmware: requesting intel-ucode/06-0f-02
>microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x57
>platform microcode: firmware: requesting intel-ucode/06-0f-02
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>e1000e 0000:02:00.0: irq 31 for MSI/MSI-X
>e1000e 0000:02:00.0: irq 31 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>CE: hpet increasing min_delta_ns to 15000 nsec

Actions: View

Attachments on bug 27206: 34256 | 34260 | 34264

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.