Attachment 34285 Details for Bug 27221 – dmesg

dmesg

dmesg.txt (text/plain), 15.05 KB, created by Ondrej Zary on 2010-03-21 06:52:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ondrej Zary

Created: 2010-03-21 06:52:49 UTC

Size: 15.05 KB

patch

obsolete

> PGTABLE ==> [0000007000 - 0000008000]
>  #6 [0000008000 - 000000c000]          BOOTMAP ==> [0000008000 - 000000c000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x0001fffd
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0001fffd
>On node 0 totalpages: 130972
>free_area_init_node: node 0, pgdat c14e0860, node_mem_map c155a000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 992 pages used for memmap
>  Normal zone: 125981 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0xe408
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129948
>Kernel command line: auto BOOT_IMAGE=Linux ro root=805
>PID hash table entries: 2048 (order: 1, 8192 bytes)
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Memory: 513764k/524276k available (3638k kernel code, 9996k reserved, 1368k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffe6000 - 0xfffff000   ( 100 kB)
>    vmalloc : 0xe07fd000 - 0xfffe4000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdfffd000   ( 511 MB)
>      .init : 0xc14e4000 - 0xc152a000   ( 280 kB)
>      .data : 0xc138db58 - 0xc14e3d18   (1368 kB)
>      .text : 0xc1000000 - 0xc138db58   (3638 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Hierarchical RCU implementation.
>NR_IRQS:16
>CPU 0 irqstacks, hard=c14b0000 soft=c14b1000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1364.851 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2729.70 BogoMIPS (lpj=5459404)
>Mount-cache hash table entries: 512
>mce: CPU supports 5 MCE banks
>Performance Events: 
>no APIC, boot with the "lapic" boot parameter to force-enable it.
>no hardware sampling interrupt available.
>p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>CPU: Intel(R) Celeron(TM) CPU                1100MHz stepping 01
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>ACPI: setting ELCR to 0200 (from 0e00)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff] (ignored)
>pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:04.1: reg 20: [io  0xb800-0xb80f]
>pci 0000:00:04.2: reg 20: [io  0xb400-0xb41f]
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>pci 0000:00:04.3: quirk: [io  0xe400-0xe43f] claimed by PIIX4 ACPI
>pci 0000:00:04.3: quirk: [io  0xe800-0xe80f] claimed by PIIX4 SMB
>pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
>pci 0000:00:09.0: reg 10: [io  0xb000-0xb03f]
>pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:00:0a.0: reg 10: [io  0xa800-0xa8ff]
>pci 0000:00:0a.0: reg 14: [mem 0xc6000000-0xc60000ff]
>pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:00:0b.0: reg 10: [mem 0xc7000000-0xc7000fff pref]
>pci 0000:01:00.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
>pci 0000:01:00.0: reg 14: [io  0xd800-0xd8ff]
>pci 0000:01:00.0: reg 18: [mem 0xc6800000-0xc680ffff]
>pci 0000:01:00.0: reg 30: [mem 0xc7fe0000-0xc7ffffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xc6800000-0xc6ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xc7f00000-0xcfffffff pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 32 bytes
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
>system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
>system 00:02: [io  0xe400-0xe43f] has been reserved
>system 00:02: [io  0xe800-0xe80f] has been reserved
>system 00:02: [io  0x0294-0x0297] has been reserved
>system 00:02: [io  0x03f0-0x03f1] has been reserved
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
>pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xc6800000-0xc6ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xc7f00000-0xcfffffff pref]
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xc6800000-0xc6ffffff]
>pci_bus 0000:01: resource 2 [mem 0xc7f00000-0xcfffffff pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>UDP hash table entries: 256 (order: 0, 4096 bytes)
>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>NET: Registered protocol family 1
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 32
>Simple Boot Flag at 0x46 set to 0x1
>microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>fuse init (API version 7.13)
>msgmni has been set to 1003
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource acpi_pm
>isapnp: Scanning for PnP cards...
>pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
>pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
>pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
>pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
>pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
>pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
>pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
> 01:01: card 'Creative SB AWE64  PnP'
>isapnp: 1 Plug & Play card detected total
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 440BX Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to userspace modesetting.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
>serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>parport1: PC-style at 0x278 [PCSPP,TRISTATE]
>parport1: irq 0 detected
>lp1: using parport1 (polling).
>Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
>FDC 0 is a post-1991 82077
>loop: module loaded
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>advansys 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>advansys 0000:00:0a.0: firmware: using built-in firmware advansys/mcode.bin
>scsi0 : AdvanSys SCSI 3.4: PCI Ultra: IO 0xA800-0xA80F, IRQ 0x9
>ata_piix 0000:00:04.1: version 2.13
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
>ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
>3c59x 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
>3c59x: Donald Becker and others.
>0000:00:09.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0001b000.
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:04.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:04.2: UHCI Host Controller
>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xe800, revision 0
>w83781d: Found a W83781D chip at 0x290
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
>ata1.00: 234493056 sectors, multi 16: LBA48 
>ata1.01: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
>ata2.00: ATA-4: WDC AC28400R, 17.01J17, max UDMA/66
>ata2.00: 16514064 sectors, multi 16: LBA 
>ata2.01: ATAPI: TOSHIBA CD-ROM XM-6402B, 1008, max UDMA/33
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>scsi: waiting for bus probes to complete ...
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sbawe 01:01.00: activated
>sbawe 01:01.02: activated
>ALSA device list:
>  #0: Sound Blaster 16 at 0x220, irq 5, dma 1&5
>TCP cubic registered
>NET: Registered protocol family 17
>scsi: waiting for bus probes to complete ...
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP1213N  TL10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/111 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 1:0:0:0: Attached scsi generic sg0 type 0
> sda1 sda2 < sda5 >
>scsi 1:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] Attached SCSI disk
>sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>sr 1:0:1:0: Attached scsi generic sg1 type 5
>scsi 2:0:0:0: Direct-Access     ATA      WDC AC28400R     17.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 16514064 512-byte logical blocks: (8.45 GB/7.87 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>sd 2:0:0:0: Attached scsi generic sg2 type 0
> sdb1
>scsi 2:0:1:0: CD-ROM            TOSHIBA  CD-ROM XM-6402B  1008 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] Attached SCSI disk
>sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
>sr 2:0:1:0: Attached scsi CD-ROM sr1
>sr 2:0:1:0: Attached scsi generic sg3 type 5
>EXT3-fs (sda5): mounted filesystem with ordered data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
>Freeing unused kernel memory: 280k freed
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): using internal journal
>eth0:  setting half-duplex.
>agpgart-intel 0000:00:00.0: AGP 1.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
>pci 0000:01:00.0: putting AGP V2 device into 2x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R200_cp.bin
>[drm] writeback test succeeded in 1 usecs
>Disabling lock debugging due to kernel taint
>Machine check events logged
>Machine check events logged
>Machine check events logged
>mce_notify_irq: 2 callbacks suppressed
>Machine check events logged
>Machine check events logged
>ata1: drained 4096 bytes to clear DRQ.
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata1.00: BMDMA stat 0x64
>ata1.00: failed command: READ DMA
>ata1.00: cmd c8/00:08:cb:56:97/00:00:00:00:00/ec tag 0 dma 4096 in
>         res 58/00:08:cb:56:97/00:00:00:00:00/ec Emask 0x2 (HSM violation)
>ata1.00: status: { DRDY DRQ }
>ata1: link is slow to respond, please be patient (ready=0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>ata1: EH complete
>agpgart-intel 0000:00:00.0: AGP 1.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
>pci 0000:01:00.0: putting AGP V2 device into 2x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R200_cp.bin
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 27221: 34283 | 34284 | 34285

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.