Attachment 34518 Details for Bug 27355 – dmesg output

dmesg output

dmesg.txt (text/plain), 21.30 KB, created by SpOeK@DistroBit.Net on 2010-03-28 09:18:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: SpOeK@DistroBit.Net

Created: 2010-03-28 09:18:37 UTC

Size: 21.30 KB

patch

obsolete

>Linux version 2.6.33-rc8 (root@Shu-Nhadek) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #17 PREEMPT Sat Feb 20 15:08:39 CET 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
>DMI 2.3 present.
>last_pfn = 0x3fff0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-AFFFF uncachable
>  B0000-BFFFF write-combining
>  C0000-C7FFF write-protect
>  C8000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 0D0000000 mask FF8000000 write-combining
>  2 base 0D0000000 mask FF8000000 write-combining
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000f6c60 00014 (v00 GBT   )
>ACPI: RSDT 3fff3000 0002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
>ACPI: FACP 3fff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
>ACPI: DSDT 3fff30c0 046F3 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
>ACPI: FACS 3fff0000 00040
>ACPI: APIC 3fff77c0 0005A (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
>ACPI: Local APIC address 0xfee00000
>135MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00008000 - 0000ef00
>(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 000142ccac]    TEXT DATA BSS ==> [0001000000 - 000142ccac]
>  #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #3 [000142d000 - 000143308e]              BRK ==> [000142d000 - 000143308e]
>  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #5 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003fff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003fff0
>On node 0 totalpages: 262031
>free_area_init_node: node 0, pgdat c13b1ca0, node_mem_map c1435000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 272 pages used for memmap
>  HighMem zone: 34530 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>nr_irqs_gsi: 24
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259983
>Kernel command line: root=/dev/sda4
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0003fff0)
>Memory: 1034524k/1048512k available (2842k kernel code, 13300k reserved, 952k data, 288k init, 139208k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc13b5000 - 0xc13fd000   ( 288 kB)
>      .data : 0xc12c6a8a - 0xc13b4b98   ( 952 kB)
>      .text : 0xc1000000 - 0xc12c6a8a   (2842 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Experimental preemptable hierarchical RCU implementation.
>NR_IRQS:288
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 2008.921 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4017.84 BogoMIPS (lpj=2008921)
>Mount-cache hash table entries: 512
>mce: CPU supports 4 MCE banks
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>CPU: AMD Athlon(tm) XP 2400+ stepping 01
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
>pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
>pci 0000:00:01.0: supports D1
>pci 0000:00:0b.0: reg 10: [io  0xb000-0xb01f]
>pci 0000:00:0b.0: supports D1 D2
>pci 0000:00:0b.1: reg 10: [io  0xb400-0xb407]
>pci 0000:00:0b.1: supports D1 D2
>pci 0000:00:0b.2: reg 10: [mem 0xea004000-0xea0047ff]
>pci 0000:00:0b.2: reg 14: [mem 0xea000000-0xea003fff]
>pci 0000:00:0b.2: supports D1 D2
>pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:0b.2: PME# disabled
>pci 0000:00:0f.0: reg 10: [io  0xb800-0xb807]
>pci 0000:00:0f.0: reg 14: [io  0xbc00-0xbc03]
>pci 0000:00:0f.0: reg 18: [io  0xc000-0xc007]
>pci 0000:00:0f.0: reg 1c: [io  0xc400-0xc403]
>pci 0000:00:0f.0: reg 20: [io  0xc800-0xc80f]
>pci 0000:00:0f.0: reg 24: [io  0xcc00-0xccff]
>pci 0000:00:0f.1: reg 20: [io  0xd000-0xd00f]
>pci 0000:00:10.0: reg 20: [io  0xd400-0xd41f]
>pci 0000:00:10.0: supports D1 D2
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:10.1: reg 20: [io  0xd800-0xd81f]
>pci 0000:00:10.1: supports D1 D2
>pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.1: PME# disabled
>pci 0000:00:10.2: reg 20: [io  0xdc00-0xdc1f]
>pci 0000:00:10.2: supports D1 D2
>pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.2: PME# disabled
>pci 0000:00:10.3: reg 20: [io  0xe000-0xe01f]
>pci 0000:00:10.3: supports D1 D2
>pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.3: PME# disabled
>pci 0000:00:10.4: reg 10: [mem 0xea005000-0xea0050ff]
>pci 0000:00:10.4: supports D1 D2
>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.4: PME# disabled
>pci 0000:00:12.0: reg 10: [io  0xe400-0xe4ff]
>pci 0000:00:12.0: reg 14: [mem 0xea006000-0xea0060ff]
>pci 0000:00:12.0: supports D1 D2
>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:12.0: PME# disabled
>pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
>pci 0000:01:00.0: reg 14: [io  0xa000-0xa0ff]
>pci 0000:01:00.0: reg 18: [mem 0xe9000000-0xe900ffff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
>pci 0000:01:00.1: reg 14: [mem 0xe9010000-0xe901ffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 32 bytes
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved
>system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
>system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
>system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
>system 00:02: [io  0x4000-0x407f] has been reserved
>system 00:02: [io  0x40f0-0x40ff] has been reserved
>system 00:02: [io  0x5000-0x500f] has been reserved
>system 00:03: [io  0x04d0-0x04d1] has been reserved
>system 00:03: [io  0x0290-0x029f] has been reserved
>system 00:03: [io  0x0800-0x0805] has been reserved
>pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
>pci 0000:00:01.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
>pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 32
>highmem bounce pool size: 64 pages
>fuse init (API version 7.13)
>msgmni has been set to 1749
>io scheduler noop registered
>io scheduler cfq registered (default)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Real Time Clock Driver v1.12b
>sata_via 0000:00:0f.0: version 2.4
>ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 11
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc800 irq 20
>ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xc808 irq 20
>pata_via 0000:00:0f.1: version 0.3.4
>pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
>scsi2 : pata_via
>scsi3 : pata_via
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
>via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
>eth0: VIA Rhine II at 0xea006000, 00:0d:61:76:02:70, IRQ 23.
>eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 4de1.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xea005000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>it87: Found IT8705F chip at 0x290, revision 3
>it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
>cpuidle: using governor ladder
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>EMU10K1_Audigy 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ALSA device list:
>  #0: SB Audigy 1 [SB0092] (rev.3, serial:0x531102) at 0xb000, irq 19
>TCP cubic registered
>NET: Registered protocol family 17
>Using IPI Shortcut mode
>registered taskstats version 1
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>ata3.00: HPA detected: current 320170943, native 320173056
>ata3.00: ATA-7: Maxtor 6Y160L0, YAR41BW0, max UDMA/133
>ata3.00: 320170943 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/133
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: HPA detected: current 312579695, native 312581808
>ata1.00: ATA-7: ST3160215AS, 3.AAD, max UDMA/133
>ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3160215AS      3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 > sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>input: USB Optical Wheel Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input3
>generic-usb 0003:04FC:0005.0001: input: USB HID v1.10 Mouse [USB Optical Wheel Mouse] on usb-0000:00:10.0-2/input0
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6Y160L0   YAR4 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 320170943 512-byte logical blocks: (163 GB/152 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 2:0:0:0: [sdb] Attached SCSI disk
>ata4.00: ATAPI: _NEC DVD_RW ND-2510A, 2.18, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            _NEC     DVD_RW ND-2510A  2.18 PQ: 0 ANSI: 5
>EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
>EXT4-fs (sda4): mounted filesystem with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
>Freeing unused kernel memory: 288k freed
>udev: starting version 149
>Linux agpgart interface v0.103
>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xE9000000
>[drm] register mmio size: 65536
>[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[drm] Generation 1 PCI interface in multifunction mode
>[drm] Limiting VRAM to one aperture
>agpgart-via 0000:00:00.0: AGP 3.5 bridge
>agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
>radeon 0000:01:00.0: putting AGP V3 device into 8x mode
>[drm] radeon: VRAM 128M
>[drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
>[drm] radeon: GTT 128M
>[drm] radeon: GTT from 0xD0000000 to 0xD7FFFFFF
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 256bits DDR
>[TTM] Zone  kernel: Available graphics memory: 447950 kiB.
>[TTM] Zone highmem: Available graphics memory: 517554 kiB.
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 128M of GTT memory ready.
>[drm] radeon: 2 quad pipes, 1 Z pipes initialized.
>[drm] radeon: cp idle (0x10000C00)
>[drm] Loading R300 Microcode
>platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
>[drm] radeon: ring at 0x00000000D0000000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Default TV standard: NTSC
>[drm] 27.000000000 MHz TV ref clk
>[drm] DFP table revision: 4
>[drm] Default TV standard: NTSC
>[drm] 27.000000000 MHz TV ref clk
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>[drm] fb mappable at 0xD8040000
>[drm] vram apper at 0xD8000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>Console: switching to colour frame buffer device 160x64
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>Adding 1048568k swap on /swap.bin.  Priority:-1 extents:6 across:1089528k 
>eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1

Actions: View

Attachments on bug 27355: 34518 | 34519 | 34586 | 34594

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.