Attachment 34523 Details for Bug 27356 – Output of dmesg for non-working case

Output of dmesg for non-working case

dmesg.txt (text/plain), 15.09 KB, created by Paul Gardiner on 2010-03-28 12:00:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul Gardiner

Created: 2010-03-28 12:00:09 UTC

Size: 15.09 KB

patch

obsolete

>or base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 3 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI Warning: Incorrect checksum in table [OEMB] - D3, should be C7 (20090903/tbutils-314)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:12.0: reg 10 io port: [0xc000-0xc007]
>pci 0000:00:12.0: reg 14 io port: [0xb000-0xb003]
>pci 0000:00:12.0: reg 18 io port: [0xa000-0xa007]
>pci 0000:00:12.0: reg 1c io port: [0x9000-0x9003]
>pci 0000:00:12.0: reg 20 io port: [0x8000-0x800f]
>pci 0000:00:12.0: reg 24 32bit mmio: [0xfe8ff800-0xfe8ffbff]
>pci 0000:00:12.0: set SATA to AHCI mode
>pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff]
>pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff]
>pci 0000:00:13.3: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff]
>pci 0000:00:13.4: reg 10 32bit mmio: [0xfe8fa000-0xfe8fafff]
>pci 0000:00:13.5: reg 10 32bit mmio: [0xfe8ff000-0xfe8ff0ff]
>pci 0000:00:13.5: supports D1 D2
>pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.5: PME# disabled
>pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
>pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
>pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:01:05.0: reg 10 64bit mmio pref: [0xf0000000-0xf7ffffff]
>pci 0000:01:05.0: reg 18 64bit mmio: [0xfeaf0000-0xfeafffff]
>pci 0000:01:05.0: reg 20 io port: [0xd000-0xd0ff]
>pci 0000:01:05.0: reg 24 32bit mmio: [0xfe900000-0xfe9fffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff]
>pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
>pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:07.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci 0000:00:14.4: transparent bridge
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x40b-0x40b has been reserved
>system 00:09: ioport range 0x4d6-0x4d6 has been reserved
>system 00:09: ioport range 0xc00-0xc01 has been reserved
>system 00:09: ioport range 0xc14-0xc14 has been reserved
>system 00:09: ioport range 0xc50-0xc51 has been reserved
>system 00:09: ioport range 0xc52-0xc52 has been reserved
>system 00:09: ioport range 0xc6c-0xc6c has been reserved
>system 00:09: ioport range 0xc6f-0xc6f has been reserved
>system 00:09: ioport range 0xcd0-0xcd1 has been reserved
>system 00:09: ioport range 0xcd2-0xcd3 has been reserved
>system 00:09: ioport range 0xcd4-0xcd5 has been reserved
>system 00:09: ioport range 0xcd6-0xcd7 has been reserved
>system 00:09: ioport range 0xcd8-0xcdf has been reserved
>system 00:09: ioport range 0x800-0x89f has been reserved
>system 00:09: ioport range 0xb10-0xb1f has been reserved
>system 00:09: ioport range 0x900-0x90f has been reserved
>system 00:09: ioport range 0x910-0x91f has been reserved
>system 00:09: ioport range 0xfe00-0xfefe has been reserved
>system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
>system 00:0a: ioport range 0x600-0x6df has been reserved
>system 00:0a: ioport range 0xae0-0xaef has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x38000000-0x3fffffff has been reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x100000-0x37ffffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xd000-0xdfff
>pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
>pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:07.0:   IO window: 0xe000-0xefff
>pci 0000:00:07.0:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:07.0:   PREFETCH window: 0x40000000-0x400fffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:14.4:   IO window: disabled
>pci 0000:00:14.4:   MEM window: disabled
>pci 0000:00:14.4:   PREFETCH window: disabled
>pci 0000:00:07.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
>pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
>pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:01:05.0: Boot video device
>highmem bounce pool size: 64 pages
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>msgmni has been set to 1751
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered (default)
>pcieport 0000:00:07.0: setting latency timer to 64
>brd: module loaded
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 22
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_atiixp 0000:00:14.1: setting latency timer to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>Atheros(R) L2 Ethernet Driver - version 2.2.3
>Copyright (c) 2007 Atheros Corporation.
>pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>sky2 driver version 1.25
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: no MSI. Back to INTx.
>eth0: RTL8101e at 0xf8068000, 00:19:db:68:45:da, XID 14000000 IRQ 19
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe8ff000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe8fe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe8fd000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe8fc000
>ata5.00: ATAPI: ASUS    DRW-1612BL, 1.06, max UDMA/66
>ata5.00: configured for UDMA/66
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe8fb000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe8fa000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>TCP cubic registered
>Using IPI No-Shortcut mode
>ata2: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: CD-ROM            ASUS     DRW-1612BL       1.06 PQ: 0 ANSI: 5
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>r8169: eth0: link down
>r8169: eth0: link down
>r8169: eth0: link up
>Sending DHCP requests ., OK
>IP-Config: Got DHCP answer from 10.0.0.5, my address is 10.0.0.9
>IP-Config: Complete:
>     device=eth0, addr=10.0.0.9, mask=255.0.0.0, gw=10.0.0.1,
>     host=slinky, domain=site, nis-domain=(none),
>     bootserver=10.0.0.5, rootserver=10.0.0.5, rootpath=
>Looking up port of RPC 100003/2 on 10.0.0.5
>Looking up port of RPC 100005/1 on 10.0.0.5
>VFS: Mounted root (nfs filesystem) readonly on device 0:12.
>Freeing unused kernel memory: 300k freed
>Registering unionfs 2.5.4 (for 2.6.32.9)
>NET: Registered protocol family 17
>Real Time Clock Driver v1.12b
>io scheduler anticipatory registered
>loop: module loaded
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
>ppdev: user-space parallel port driver
>Linux agpgart interface v0.103
>lirc_dev: IR Remote Control driver registered, major 61 
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
>lirc_mceusb: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>, Dan Conti <dconti@acm.wwu.edu>
>ACPI: duty_cycle spans bit 4
>processor LNXCPU:00: registered as cooling_device0
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>usb 3-2: reset full speed USB device using ohci_hcd and address 2
>lirc_dev: lirc_register_driver: sample_rate: 0
>lirc_mceusb[2]: Philips eHome Infrared Transceiver on usb3:2
>usbcore: registered new interface driver lirc_mceusb
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input2
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to userspace modesetting.
>pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
>input: lircd as /devices/virtual/input/input3
>[drm] Setting GART location based on new memory map
>[drm] Loading RS690/RS740 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin
>radeon_cp: Failed to load firmware "radeon/RS690_cp.bin"
>[drm:radeon_do_init_cp] *ERROR* Failed to load firmware!

Actions: View

Attachments on bug 27356: 34520 | 34521 | 34523

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.