Attachment 34827 Details for Bug 27541 – dmesg after booting

dmesg after booting

dmesg-2.6.34-rc3-git8_KMS.log (text/plain), 20.87 KB, created by Rogutės Sparnuotos on 2010-04-08 13:46:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rogutės Sparnuotos

Created: 2010-04-08 13:46:06 UTC

Size: 20.87 KB

patch

obsolete

>Linux version 2.6.34-rc3-git8 (u@urvas) (gcc version 4.4.3 (GCC) ) #1 Thu Apr 8 22:37:21 EEST 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fe60000 (usable)
> BIOS-e820: 000000000fe60000 - 000000000fe73c00 (ACPI data)
> BIOS-e820: 000000000fe73c00 - 000000000fe80000 (ACPI NVS)
> BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0xfe60 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FF0000000 write-back
>  1 base 00FF80000 mask FFFF80000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>initial memory mapped : 0 - 00800000
>init_memory_mapping: 0000000000000000-000000000fe60000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 000fc00000 page 2M
> 000fc00000 - 000fe60000 page 4k
>kernel direct mapping tables up to fe60000 @ 10000-15000
>ACPI: RSDP 000f6690 00014 (v00 PTLTD )
>ACPI: RSDT 0fe68695 0002C (v01 PTLTD  EFRSDT   01340000  LTP 00000000)
>ACPI: FACP 0fe73b64 00074 (v01 QUANTA EFmador  01340000 RT2  00000001)
>ACPI: DSDT 0fe686c1 0B4A3 (v01 HP-MCD EF DSDT  01340000 MSFT 0100000D)
>ACPI: FACS 0fe7ffc0 00040
>ACPI: BOOT 0fe73bd8 00028 (v01 PTLTD  EFBFTBL$ 01340000  LTP 00000001)
>254MB LOWMEM available.
>  mapped low ram: 0 - 0fe60000
>  low ram: 0 - 0fe60000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x0000fe60
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0000fe60
>On node 0 totalpages: 65007
>free_area_init_node: node 0, pgdat c04b0d18, node_mem_map c1000200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 477 pages used for memmap
>  Normal zone: 60547 pages, LIFO batch:15
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>Local APIC disabled by BIOS -- reenabling.
>Found and enabled local APIC!
>nr_irqs_gsi: 16
>Allocating PCI resources starting at 10000000 (gap: 10000000:efb80000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64498
>Kernel command line: lapic pci=nobios root=/dev/sda5 ro drm.debug=0x06 
>PID hash table entries: 1024 (order: 0, 4096 bytes)
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Subtract (15 early reservations)
>  #0 [0000100000 - 0000534ca0]   TEXT DATA BSS
>  #1 [000009f400 - 0000100000]   BIOS reserved
>  #2 [0000535000 - 0000537290]             BRK
>  #3 [0000010000 - 0000011000]         PGTABLE
>  #4 [0001000000 - 0001200000]         BOOTMEM
>  #5 [0001200000 - 0001200004]         BOOTMEM
>  #6 [0001200020 - 00012000a0]         BOOTMEM
>  #7 [00012000a0 - 00012000b8]         BOOTMEM
>  #8 [00012000c0 - 00012008c0]         BOOTMEM
>  #9 [00012008c0 - 00012009d8]         BOOTMEM
>  #10 [00012009e0 - 0001200a13]         BOOTMEM
>  #11 [0001200a20 - 0001200a53]         BOOTMEM
>  #12 [0001200a60 - 0001201a60]         BOOTMEM
>  #13 [0001201a60 - 0001221a60]         BOOTMEM
>  #14 [0001221a60 - 0001231a60]         BOOTMEM
>Memory: 253456k/260480k available (2667k kernel code, 6572k reserved, 1125k data, 276k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
>    vmalloc : 0xd0660000 - 0xfffa2000   ( 761 MB)
>    lowmem  : 0xc0000000 - 0xcfe60000   ( 254 MB)
>      .init : 0xc04b5000 - 0xc04fa000   ( 276 kB)
>      .data : 0xc039aefa - 0xc04b43cc   (1125 kB)
>      .text : 0xc0100000 - 0xc039aefa   (2667 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>NR_IRQS:288
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1063.213 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2127.02 BogoMIPS (lpj=3544043)
>Mount-cache hash table entries: 512
>mce: CPU supports 5 MCE banks
>Performance Events: p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>CPU: Intel(R) Celeron(TM) CPU                1066MHz stepping 01
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20100121
>ACPI: setting ELCR to 0200 (from 0420)
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>devtmpfs: initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [PFAN] (off)
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
>pci 0000:00:00.0: reg 10: invalid size (l 0x0 sz 0x8 mask 0xfffffff0); broken device?
>pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref]
>pci 0000:00:02.0: reg 14: [mem 0xe0000000-0xe007ffff]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:00:02.1: reg 14: [mem 0xe0080000-0xe00fffff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
>pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:1f.1: reg 20: [io  0x1820-0x182f]
>pci 0000:00:1f.1: reg 24: [mem 0xe0100000-0xe01003ff]
>pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1f.5: reg 10: [io  0x1200-0x12ff]
>pci 0000:00:1f.5: reg 14: [io  0x1300-0x133f]
>pci 0000:01:03.0: reg 10: [io  0x2000-0x20ff]
>pci 0000:01:03.0: reg 14: [mem 0xe0200000-0xe02000ff]
>pci 0000:01:03.0: supports D1 D2
>pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:01:03.0: PME# disabled
>pci 0000:01:05.0: reg 10: [mem 0x00000000-0x00000fff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:05.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-01]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.22.1.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 32 bytes
>reserve RAM buffer: 000000000009f400 - 000000000009ffff 
>reserve RAM buffer: 000000000fe60000 - 000000000fffffff 
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
>system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:02: [io  0x1000-0x107f] has been reserved
>system 00:02: [io  0x1180-0x11bf] has been reserved
>system 00:02: [io  0xfe00] has been reserved
>system 00:02: [io  0x0800-0x080f] has been reserved
>system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
>system 00:02: [mem 0xfebffc00-0xfebfffff] has been reserved
>PCI: max bus depth: 2 pci_try_num: 3
>pci 0000:00:1e.0: BAR 9: assigned [mem 0x10000000-0x13ffffff pref]
>pci 0000:01:05.0: BAR 9: assigned [mem 0x10000000-0x13ffffff pref]
>pci 0000:01:05.0: BAR 10: assigned [mem 0x14000000-0x17ffffff]
>pci 0000:01:05.0: BAR 0: assigned [mem 0xe0201000-0xe0201fff]
>pci 0000:01:05.0: BAR 0: set to [mem 0xe0201000-0xe0201fff] (PCI address [0xe0201000-0xe0201fff]
>pci 0000:01:05.0: BAR 7: assigned [io  0x2400-0x24ff]
>pci 0000:01:05.0: BAR 8: assigned [io  0x2800-0x28ff]
>pci 0000:01:05.0: CardBus bridge to [bus 02-05]
>pci 0000:01:05.0:   bridge window [io  0x2400-0x24ff]
>pci 0000:01:05.0:   bridge window [io  0x2800-0x28ff]
>pci 0000:01:05.0:   bridge window [mem 0x10000000-0x13ffffff pref]
>pci 0000:01:05.0:   bridge window [mem 0x14000000-0x17ffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 01-01]
>pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
>pci 0000:00:1e.0:   bridge window [mem 0x10000000-0x13ffffff pref]
>pci 0000:00:1e.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>pci 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xe0200000-0xe02fffff]
>pci_bus 0000:01: resource 2 [mem 0x10000000-0x13ffffff pref]
>pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:02: resource 0 [io  0x2400-0x24ff]
>pci_bus 0000:02: resource 1 [io  0x2800-0x28ff]
>pci_bus 0000:02: resource 2 [mem 0x10000000-0x13ffffff pref]
>pci_bus 0000:02: resource 3 [mem 0x14000000-0x17ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>UDP hash table entries: 256 (order: 0, 4096 bytes)
>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 0 bytes, default 32
>Simple Boot Flag at 0x36 set to 0x1
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>fuse init (API version 7.13)
>msgmni has been set to 495
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>ACPI: AC Adapter [ACAD] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLP]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN] (off)
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
>ACPI: Video Device [GRFX] (multi-head: yes  rom: yes  post: no)
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource acpi_pm
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (56 C)
>ACPI: Battery Slot [BAT1] (battery absent)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 830M Chipset
>agpgart-intel 0000:00:00.0: detected 892K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>i915 0000:00:02.0: setting latency timer to 64
>[drm:i915_init_phys_hws], Enabled hardware status page
>[drm] set up 7M of stolen space
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_sdvo_device_mapping], different child size is found. Invalid.
>[drm:parse_device_mapping], different child size is found. Invalid.
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:tfp410_init], tfp410 not detected got VID FFFFFFFF: from intel drm DVOI2C_E Slave 56.
>[drm] initialized overlay support
>[drm:i915_driver_irq_handler], pipe a underrun
>[drm:i915_driver_irq_handler], pipe b underrun
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 31500
>[drm:i9xx_get_fifo_size], FIFO size - (0x00017e5f) A: 95
>[drm:i9xx_get_fifo_size], FIFO size - (0x00017e5f) B: 29
>[drm:intel_calculate_wm], FIFO entries required for mode: 19
>[drm:intel_calculate_wm], FIFO watermark level: 74
>[drm:intel_calculate_wm], FIFO entries required for mode: 0
>[drm:intel_calculate_wm], FIFO watermark level: 27
>[drm:i9xx_update_wm], FIFO watermarks - A: 63, B: 27
>[drm:i9xx_update_wm], Setting FIFO watermarks - A: 63, B: 27, C: 2, SR 1
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 0
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
>[drm:intel_pipe_set_base], No FB bound
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 31500
>[drm:i9xx_get_fifo_size], FIFO size - (0x00017e5f) A: 95
>[drm:i9xx_get_fifo_size], FIFO size - (0x00017e5f) B: 29
>[drm:intel_calculate_wm], FIFO entries required for mode: 19
>[drm:intel_calculate_wm], FIFO watermark level: 74
>[drm:intel_calculate_wm], FIFO entries required for mode: 0
>[drm:intel_calculate_wm], FIFO watermark level: 27
>[drm:i9xx_update_wm], FIFO watermarks - A: 63, B: 27
>[drm:i9xx_update_wm], Setting FIFO watermarks - A: 63, B: 27, C: 2, SR 1
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 31500
>[drm:i9xx_get_fifo_size], FIFO size - (0x00017e5f) A: 95
>[drm:i9xx_get_fifo_size], FIFO size - (0x00017e5f) B: 29
>[drm:intel_calculate_wm], FIFO entries required for mode: 19
>[drm:intel_calculate_wm], FIFO watermark level: 74
>[drm:intel_calculate_wm], FIFO entries required for mode: 0
>[drm:intel_calculate_wm], FIFO watermark level: 27
>[drm:i9xx_update_wm], FIFO watermarks - A: 63, B: 27
>[drm:i9xx_update_wm], Setting FIFO watermarks - A: 63, B: 27, C: 2, SR 1
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>No connectors reported connected with modes
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
>[drm:intelfb_probe], 
>[drm:intel_opregion_init], graphic opregion physical addr: 0x0
>[drm:intel_opregion_init], ACPI OpRegion not supported!
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>loop: module loaded
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: power state changed by ACPI to D0
>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1820 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1828 irq 15
>8139too: 8139too Fast Ethernet driver 0.9.28
>8139too 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
>8139too 0000:01:03.0: eth0: RealTek RTL8139 at 0x2000, 00:c0:9f:08:01:50, IRQ 5
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usbcore: registered new interface driver cdc_acm
>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram
>i2c /dev entries driver
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>ata2.01: NODEV after polling detection
>ata1.00: ATA-6: WDC WD400VE-00HDT0, 09.07D09, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata2.00: ATAPI: UJDA730 DVD/CDRW, 1.02, max UDMA/33
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD400VE-00HD 09.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: configured for UDMA/33
> sda:
>scsi 1:0:0:0: CD-ROM            MATSHITA UJDA730 DVD/CDRW 1.02 PQ: 0 ANSI: 5
> sda1 sda2 < sda5sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
> sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>intel8x0_measure_ac97_clock: measured 51102 usecs (2456 samples)
>intel8x0: clocking to 48000
>ALSA device list:
>  #0: Intel 82801CA-ICH3 with ALC200,200P at irq 10
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Using IPI Shortcut mode
>rtc_cmos 00:04: setting system clock to 2010-04-15 01:40:21 UTC (1271295621)
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x88479b/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>EXT4-fs (sda5): mounted filesystem with ordered data mode
>VFS: Mounted root (ext2 filesystem) readonly on device 8:5.
>devtmpfs: mounted
>Freeing unused kernel memory: 276k freed
>Write protecting the kernel text: 2668k
>Write protecting the kernel read-only data: 884k
>udev: starting version 151
>EXT4-fs (sda6): mounted filesystem with ordered data mode
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 27541: 34826 | 34827 | 34828

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.