Attachment 34944 Details for Bug 27609 – Full kernel log including failure message.

Full kernel log including failure message.

kern.log (text/plain), 31.32 KB, created by Nick Bowler on 2010-04-12 18:36:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nick Bowler

Created: 2010-04-12 18:36:55 UTC

Size: 31.32 KB

patch

obsolete

>Linux version 2.6.34-rc3-00500-g0eddb51 (tv@aphrodite) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #34 PREEMPT Mon Apr 12 21:41:29 EDT 2010
>Command line: root=/dev/sda1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fef0000 (usable)
> BIOS-e820: 000000005fef0000 - 000000005fef3000 (ACPI NVS)
> BIOS-e820: 000000005fef3000 - 000000005ff00000 (ACPI data)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI 2.3 present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x5fef0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FFC0000000 write-back
>  1 base 0040000000 mask FFE0000000 write-back
>  2 base 005FF00000 mask FFFFF00000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1GB, range: 512MB, type WB
>reg 2, base: 1535MB, range: 1MB, type UC
>total RAM covered: 1535M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 2M 	num_reg: 3  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1GB, range: 512MB, type WB
>reg 2, base: 1535MB, range: 1MB, type UC
>initial memory mapped : 0 - 20000000
>found SMP MP-table at [ffff8800000f5a40] f5a40
>init_memory_mapping: 0000000000000000-000000005fef0000
> 0000000000 - 005fe00000 page 2M
> 005fe00000 - 005fef0000 page 4k
>kernel direct mapping tables up to 5fef0000 @ 10000-14000
>ACPI: RSDP 00000000000f74f0 00014 (v00 Nvidia)
>ACPI: RSDT 000000005fef3040 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: FACP 000000005fef30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: DSDT 000000005fef3180 07FA9 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
>ACPI: FACS 000000005fef0000 00040
>ACPI: MCFG 000000005fefb240 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: APIC 000000005fefb180 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880001e00000-ffff8800033fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0005fef0
>On node 0 totalpages: 392831
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3927 pages, LIFO batch:0
>  DMA32 zone: 5317 pages used for memmap
>  DMA32 zone: 383531 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>nr_irqs_gsi: 24
>Allocating PCI resources starting at 5ff00000 (gap: 5ff00000:90100000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387458
>Kernel command line: root=/dev/sda1
>early_res array is doubled to 64 at [12000 - 127ff]
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ fffe000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Subtract (32 early reservations)
>  #1 [0001000000 - 000150a160]   TEXT DATA BSS
>  #2 [000150b000 - 000150b14d]             BRK
>  #3 [00000f5a50 - 0000100000]   BIOS reserved
>  #4 [00000f5a40 - 00000f5a50]    MP-table mpf
>  #5 [000009f800 - 00000f1400]   BIOS reserved
>  #6 [00000f1530 - 00000f5a40]   BIOS reserved
>  #7 [00000f1400 - 00000f1530]    MP-table mpc
>  #8 [0000010000 - 0000012000]         PGTABLE
>  #9 [000150b180 - 000150c180]         BOOTMEM
>  #10 [000150a180 - 000150a240]         BOOTMEM
>  #11 [0001d0d000 - 0001d0e000]         BOOTMEM
>  #12 [0001d0e000 - 0001d0f000]         BOOTMEM
>  #13 [0001e00000 - 0003400000]        MEMMAP 0
>  #14 [000150a240 - 000150a340]         BOOTMEM
>  #15 [000150c180 - 0001514180]         BOOTMEM
>  #16 [0001515000 - 0001516000]         BOOTMEM
>  #17 [000150a340 - 000150a383]         BOOTMEM
>  #18 [000150a3c0 - 000150a5b8]         BOOTMEM
>  #19 [000150a5c0 - 000150a628]         BOOTMEM
>  #20 [000150a640 - 000150a6a8]         BOOTMEM
>  #21 [000150a6c0 - 000150a728]         BOOTMEM
>  #22 [000150a740 - 000150a7a8]         BOOTMEM
>  #23 [000150a7c0 - 000150a828]         BOOTMEM
>  #24 [000150a840 - 000150a8a8]         BOOTMEM
>  #25 [000150a8c0 - 000150a928]         BOOTMEM
>  #26 [000150a940 - 000150a9a8]         BOOTMEM
>  #27 [000150a9c0 - 000150a9cf]         BOOTMEM
>  #28 [000150aa00 - 000150aa0f]         BOOTMEM
>  #29 [0001516000 - 000151e000]         BOOTMEM
>  #30 [000151e000 - 000171e000]         BOOTMEM
>  #31 [000171e000 - 000181e000]         BOOTMEM
>Memory: 1540468k/1571776k available (3005k kernel code, 452k absent, 30856k reserved, 1567k data, 328k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:288
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1603.564 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3207.12 BogoMIPS (lpj=1603564)
>Mount-cache hash table entries: 256
>tseg: 005ff00000
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>CPU: AMD Sempron(tm) Processor 2800+ stepping 02
>ACPI: Core revision 20100121
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...
>..... (found apic 0 pin 0) ...
>....... failed.
>...trying to set up timer as Virtual Wire IRQ...
>..... failed.
>...trying to set up timer as ExtINT IRQ...
>..... works.
>NET: Registered protocol family 16
>node 0 link 0: io port [8000, ffff]
>TOM: 0000000060000000 aka 1536M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [60000000, efffffff]
>node 0 link 0: mmio [f4000000, fe02ffff]
>node 0 link 0: mmio [f0000000, f04fffff]
>bus: [00, 04] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0x60000000-0xf3ffffff]
>bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
>PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x8000-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:0a.1: reg 20: [io  0x4c00-0x4c3f]
>pci 0000:00:0a.1: reg 24: [io  0x4c40-0x4c7f]
>pci 0000:00:0a.1: PME# supported from D3hot D3cold
>pci 0000:00:0a.1: PME# disabled
>pci 0000:00:0b.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
>pci 0000:00:0b.0: supports D1 D2
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0b.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
>pci 0000:00:0b.1: supports D1 D2
>pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.1: PME# disabled
>pci 0000:00:0d.0: reg 20: [io  0xf400-0xf40f]
>pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
>pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
>pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
>pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
>pci 0000:00:0e.0: reg 20: [io  0xe000-0xe00f]
>pci 0000:00:0e.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:0f.0: reg 10: [io  0x09e0-0x09e7]
>pci 0000:00:0f.0: reg 14: [io  0x0be0-0x0be3]
>pci 0000:00:0f.0: reg 18: [io  0x0960-0x0967]
>pci 0000:00:0f.0: reg 1c: [io  0x0b60-0x0b63]
>pci 0000:00:0f.0: reg 20: [io  0xcc00-0xcc0f]
>pci 0000:00:0f.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
>pci 0000:00:10.1: reg 10: [mem 0xfe028000-0xfe02bfff]
>pci 0000:00:10.1: PME# supported from D3hot D3cold
>pci 0000:00:10.1: PME# disabled
>PCI: peer root bus 00 res updated from pci conf
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:02.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:02.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:02:00.0: reg 10: [mem 0xfd400000-0xfd5fffff 64bit]
>pci 0000:02:00.0: reg 30: [mem 0xfd7e0000-0xfd7fffff pref]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:03.0: PCI bridge to [bus 02-02]
>pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:03.0:   bridge window [mem 0xfd400000-0xfd7fffff]
>pci 0000:00:03.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:03:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:03:00.0: reg 18: [mem 0xfdde0000-0xfddeffff 64bit]
>pci 0000:03:00.0: reg 20: [io  0xac00-0xacff]
>pci 0000:03:00.0: reg 30: [mem 0xfddc0000-0xfdddffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
>pci 0000:03:00.1: supports D1 D2
>pci 0000:00:04.0: PCI bridge to [bus 03-03]
>pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:04:05.0: reg 10: [mem 0xfdbff000-0xfdbff7ff]
>pci 0000:04:05.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
>pci 0000:04:05.0: supports D1 D2
>pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:04:05.0: PME# disabled
>pci 0000:04:09.0: reg 10: [io  0x8c00-0x8c3f]
>pci 0000:04:09.0: supports D2
>pci 0000:00:10.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:10.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:10.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>pci 0000:00:10.0:   bridge window [mem 0xfda00000-0xfdafffff pref]
>pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:10.0:   bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
>pci 0000:00:10.0:   bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 000000005fef0000 - 000000005fffffff 
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x4000-0x407f] has been reserved
>system 00:01: [io  0x4080-0x40ff] has been reserved
>system 00:01: [io  0x4400-0x447f] has been reserved
>system 00:01: [io  0x4480-0x44ff] has been reserved
>system 00:01: [io  0x4800-0x487f] has been reserved
>system 00:01: [io  0x4880-0x48ff] has been reserved
>system 00:01: [io  0x2000-0x207f] has been reserved
>system 00:01: [io  0x2080-0x20ff] has been reserved
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>system 00:02: [io  0x0800-0x087f] has been reserved
>system 00:02: [io  0x0290-0x0297] has been reserved
>system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:0f: [mem 0x000f0000-0x000f3fff] could not be reserved
>system 00:0f: [mem 0x000f4000-0x000f7fff] could not be reserved
>system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:0f: [mem 0x5fef0000-0x5fefffff] could not be reserved
>system 00:0f: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0f: [mem 0x00100000-0x5feeffff] could not be reserved
>system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0f: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:0f: [mem 0xfefff000-0xfeffffff] has been reserved
>system 00:0f: [mem 0xfff80000-0xfff80fff] has been reserved
>system 00:0f: [mem 0xfff90000-0xfffbffff] has been reserved
>system 00:0f: [mem 0xfffed000-0xfffeffff] has been reserved
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:02.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:02.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:00:03.0: PCI bridge to [bus 02-02]
>pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:03.0:   bridge window [mem 0xfd400000-0xfd7fffff]
>pci 0000:00:03.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:04.0: PCI bridge to [bus 03-03]
>pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:10.0: PCI bridge to [bus 04-04]
>pci 0000:00:10.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:10.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>pci 0000:00:10.0:   bridge window [mem 0xfda00000-0xfdafffff pref]
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:10.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
>pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
>pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:01: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd7fffff]
>pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
>pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
>pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:04: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 6 [mem 0x60000000-0xf3ffffff]
>pci_bus 0000:04: resource 7 [mem 0xf4000000-0xfcffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:09.0: Found disabled HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Found disabled HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Found disabled HT MSI Mapping
>pci 0000:00:10.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Found disabled HT MSI Mapping
>pci 0000:00:10.1: Enabling HT MSI Mapping
>pci 0000:03:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>msgmni has been set to 3008
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:02.0: setting latency timer to 64
>pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:03.0: setting latency timer to 64
>pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:04.0: setting latency timer to 64
>pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN] (on)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>radeon 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:03:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDDE0000
>[drm] register mmio size: 65536
>ATOM BIOS: 9598.10.78.0.0.AS01
>[drm] Clocks initialized !
>[drm] Internal thermal controller without fan control
>[drm] 4 Power State(s)
>[drm] State 0 Default (default)
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 725000/500000
>[drm] 		1 engine/memory: 725000/500000
>[drm] 		2 engine/memory: 725000/500000
>[drm] State 1 Performance 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 110000/500000
>[drm] 		1 engine/memory: 300000/500000
>[drm] 		2 engine/memory: 725000/500000
>[drm] State 2 Default 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 600000/500000
>[drm] 		1 engine/memory: 600000/500000
>[drm] 		2 engine/memory: 600000/500000
>[drm] State 3 Performance 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 300000/500000
>[drm] 		1 engine/memory: 300000/500000
>[drm] 		2 engine/memory: 725000/500000
>[drm] radeon: power management initialized
>radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
>radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 770234 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:03:00.0: irq 27 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV635 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/RV635_pfp.bin
>platform radeon_cp.0: firmware: using built-in firmware radeon/RV635_me.bin
>platform radeon_cp.0: firmware: using built-in firmware radeon/R600_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Default TV standard: NTSC
>[drm] Default TV standard: NTSC
>[drm] Default TV standard: NTSC
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   DIN
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_KLDSCP_DAC2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD2
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
>[drm] fb mappable at 0xE0141000
>[drm] vram apper at 0xE0000000
>[drm] size 4325376
>[drm] fb depth is 24
>[drm]    pitch is 5632
>Console: switching to colour frame buffer device 170x48
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.2.0 20080528 for 0000:03:00.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:0e.0: Using SWNCQ mode
>sata_nv 0000:00:0e.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:0f.0: Using SWNCQ mode
>sata_nv 0000:00:0f.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
>ata1.00: 160086528 sectors, multi 1: LBA 
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>ata1.00: Disabling SWNCQ mode (depth 1)
>sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>EXT3-fs (sda1): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
>Freeing unused kernel memory: 328k freed
>kjournald starting.  Commit interval 5 seconds
>udev: starting version 149
>et131x: module is from the staging directory, the quality is unknown, you have been warned.
>et131x 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
>et131x 0000:02:00.0: setting latency timer to 64
>PSR 5e46e000
>PRS 5e58d000
>et131x 0000:02:00.0: RX Dma failed to enter halt state. CSR 0x00022001
>pata_amd 0000:00:0d.0: version 0.4.1
>pata_amd 0000:00:0d.0: setting latency timer to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
>ata5.00: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
>ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
>ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:0b.1: setting latency timer to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
>ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:0b.0: setting latency timer to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>EXT3-fs (sda1): using internal journal
>usb 2-6: new full speed USB device using ohci_hcd and address 2
>hub 2-6:1.0: USB hub found
>hub 2-6:1.0: 4 ports detected
>usb 2-6.2: new low speed USB device using ohci_hcd and address 3
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6.2/2-6.2:1.0/input/input3
>generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-6.2/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>Adding 931732k swap on /dev/sda2.  Priority:-1 extents:1 across:931732k 
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ENS1371 0000:04:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
>HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
>hda_intel: Disable MSI for Nvidia chipset
>HDA Intel 0000:00:10.1: setting latency timer to 64
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>HDA Intel 0000:03:00.1: PCI INT B -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:03:00.1: irq 28 for MSI/MSI-X
>HDA Intel 0000:03:00.1: setting latency timer to 64
>NOHZ: local_softirq_pending 08
>NET: Registered protocol family 10
>it87: Found IT8716F chip at 0x290, revision 0
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>ACPI: resource it87 [io  0x0295-0x0296] conflicts with ACPI region HWRE [??? 0x00000295-0x00000296 flags 0xffff88005f9700d8]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>NOHZ: local_softirq_pending 08
>svc: failed to register lockdv1 RPC service (errno 97).
>eth0: no IPv6 routers present
>radeon 0000:03:00.0: r600_cs_track_validate_cb:198 cb pitch (32 x 4 = 128) invalid
>radeon 0000:03:00.0: r600_packet3_check:1109 invalid cmd stream 514
>[drm:radeon_cs_ioctl] *ERROR* Invalid command stream !

Actions: View

Attachments on bug 27609: 34944

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.