Attachment 35000 Details for Bug 26733 – dmesg_extended

dmesg_extended

dmesg_extended.log (text/plain), 61.37 KB, created by David Heidelberg (okias) on 2010-04-14 07:43:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Heidelberg (okias)

Created: 2010-04-14 07:43:57 UTC

Size: 61.37 KB

patch

obsolete

>34116] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
>[    1.834160] ahci: SSS flag set, parallel bus scan disabled
>[    1.834186] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>[    1.834190] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs 
>[    1.834193] ahci 0000:00:1f.2: setting latency timer to 64
>[    1.841038] scsi0 : ahci
>[    1.841134] scsi1 : ahci
>[    1.841211] scsi2 : ahci
>[    1.841287] scsi3 : ahci
>[    1.841363] scsi4 : ahci
>[    1.841438] scsi5 : ahci
>[    1.841599] ata1: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff900 irq 30
>[    1.841601] ata2: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8eff980 irq 30
>[    1.841603] ata3: DUMMY
>[    1.841604] ata4: DUMMY
>[    1.841606] ata5: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb00 irq 30
>[    1.841608] ata6: SATA max UDMA/133 abar m2048@0xf8eff800 port 0xf8effb80 irq 30
>[    1.841689] PPP generic driver version 2.4.2
>[    1.841756] PPP Deflate Compression module registered
>[    1.841758] PPP BSD Compression module registered
>[    1.841833] PPP MPPE Compression module registered
>[    1.841835] NET: Registered protocol family 24
>[    1.841846] PPPoL2TP kernel driver, V1.0
>[    1.841855] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    1.841871] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.841906] r8169 0000:02:00.0: setting latency timer to 64
>[    1.841967] r8169 0000:02:00.0: irq 31 for MSI/MSI-X
>[    1.842071] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000007e000, 40:61:86:12:2d:12, XID 18000000 IRQ 31
>[    1.843537] usbcore: registered new interface driver cdc_ether
>[    1.843562] usbcore: registered new interface driver cdc_subset
>[    1.843568] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
>[    1.843570] iwlagn: Copyright(c) 2003-2010 Intel Corporation
>[    1.843617] iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    1.843623] iwlagn 0000:06:00.0: setting latency timer to 64
>[    1.843641] iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
>[    1.861751] iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>[    1.861808] iwlagn 0000:06:00.0: irq 32 for MSI/MSI-X
>[    1.861915] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-5000-2.ucode
>[    1.861955] usbmon: debugfs is not available
>[    1.861957] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.861959] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
>[    1.861973] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.861982] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    1.861985] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    1.861991] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    1.861998] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.862007] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>[    1.862029] ehci_hcd 0000:00:1a.7: debug port 1
>[    1.862033] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.865920] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>[    1.865922] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>[    1.865932] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8efec00
>[    1.865936] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.869823] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.876008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    1.876023] usb usb1: default language 0x0409
>[    1.876029] usb usb1: udev 1, busnum 1, minor = 0
>[    1.876030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.876032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.876034] usb usb1: Product: EHCI Host Controller
>[    1.876035] usb usb1: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty ehci_hcd
>[    1.876037] usb usb1: SerialNumber: 0000:00:1a.7
>[    1.876091] usb usb1: usb_probe_device
>[    1.876094] usb usb1: configuration #1 chosen from 1 choice
>[    1.876100] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    1.876136] hub 1-0:1.0: usb_probe_interface
>[    1.876138] hub 1-0:1.0: usb_probe_interface - got id
>[    1.876140] hub 1-0:1.0: USB hub found
>[    1.876144] hub 1-0:1.0: 6 ports detected
>[    1.876145] hub 1-0:1.0: standalone hub
>[    1.876147] hub 1-0:1.0: no power switching (usb 1.0)
>[    1.876148] hub 1-0:1.0: individual port over-current protection
>[    1.876150] hub 1-0:1.0: power on to power good time: 20ms
>[    1.876153] hub 1-0:1.0: local power source is good
>[    1.876155] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    1.876211] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    1.876220] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    1.876223] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    1.876227] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    1.876233] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.876236] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>[    1.876258] ehci_hcd 0000:00:1d.7: debug port 1
>[    1.876261] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.880143] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[    1.880144] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    1.880155] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8eff000
>[    1.880159] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.884048] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.890008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.890024] usb usb2: default language 0x0409
>[    1.890029] usb usb2: udev 1, busnum 2, minor = 128
>[    1.890031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.890033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.890034] usb usb2: Product: EHCI Host Controller
>[    1.890036] usb usb2: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty ehci_hcd
>[    1.890038] usb usb2: SerialNumber: 0000:00:1d.7
>[    1.890088] usb usb2: usb_probe_device
>[    1.890090] usb usb2: configuration #1 chosen from 1 choice
>[    1.890095] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    1.890129] hub 2-0:1.0: usb_probe_interface
>[    1.890131] hub 2-0:1.0: usb_probe_interface - got id
>[    1.890132] hub 2-0:1.0: USB hub found
>[    1.890135] hub 2-0:1.0: 6 ports detected
>[    1.890137] hub 2-0:1.0: standalone hub
>[    1.890138] hub 2-0:1.0: no power switching (usb 1.0)
>[    1.890139] hub 2-0:1.0: individual port over-current protection
>[    1.890141] hub 2-0:1.0: power on to power good time: 20ms
>[    1.890144] hub 2-0:1.0: local power source is good
>[    1.890145] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    1.890212] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.890272] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.890277] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    1.890280] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    1.890284] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    1.890290] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    1.890293] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.890295] uhci_hcd 0000:00:1a.0: Performing full reset
>[    1.890307] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>[    1.890311] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>[    1.890337] usb usb3: default language 0x0409
>[    1.890342] usb usb3: udev 1, busnum 3, minor = 256
>[    1.890344] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.890346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.890347] usb usb3: Product: UHCI Host Controller
>[    1.890349] usb usb3: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty uhci_hcd
>[    1.890351] usb usb3: SerialNumber: 0000:00:1a.0
>[    1.890400] usb usb3: usb_probe_device
>[    1.890402] usb usb3: configuration #1 chosen from 1 choice
>[    1.890407] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    1.890440] hub 3-0:1.0: usb_probe_interface
>[    1.890442] hub 3-0:1.0: usb_probe_interface - got id
>[    1.890444] hub 3-0:1.0: USB hub found
>[    1.890447] hub 3-0:1.0: 2 ports detected
>[    1.890448] hub 3-0:1.0: standalone hub
>[    1.890450] hub 3-0:1.0: no power switching (usb 1.0)
>[    1.890451] hub 3-0:1.0: individual port over-current protection
>[    1.890453] hub 3-0:1.0: power on to power good time: 2ms
>[    1.890456] hub 3-0:1.0: local power source is good
>[    1.890457] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    1.890486] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
>[    1.890504] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[    1.890509] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    1.890511] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    1.890515] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    1.890520] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    1.890524] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.890525] uhci_hcd 0000:00:1a.1: Performing full reset
>[    1.890538] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>[    1.890547] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
>[    1.890570] usb usb4: default language 0x0409
>[    1.890575] usb usb4: udev 1, busnum 4, minor = 384
>[    1.890577] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.890578] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.890580] usb usb4: Product: UHCI Host Controller
>[    1.890582] usb usb4: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty uhci_hcd
>[    1.890583] usb usb4: SerialNumber: 0000:00:1a.1
>[    1.890638] usb usb4: usb_probe_device
>[    1.890640] usb usb4: configuration #1 chosen from 1 choice
>[    1.890645] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    1.890681] hub 4-0:1.0: usb_probe_interface
>[    1.890682] hub 4-0:1.0: usb_probe_interface - got id
>[    1.890684] hub 4-0:1.0: USB hub found
>[    1.890688] hub 4-0:1.0: 2 ports detected
>[    1.890690] hub 4-0:1.0: standalone hub
>[    1.890691] hub 4-0:1.0: no power switching (usb 1.0)
>[    1.890692] hub 4-0:1.0: individual port over-current protection
>[    1.890694] hub 4-0:1.0: power on to power good time: 2ms
>[    1.890697] hub 4-0:1.0: local power source is good
>[    1.890698] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    1.890724] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
>[    1.890743] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[    1.890748] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    1.890751] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    1.890754] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    1.890760] uhci_hcd 0000:00:1a.2: detected 2 ports
>[    1.890763] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.890765] uhci_hcd 0000:00:1a.2: Performing full reset
>[    1.890777] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
>[    1.890786] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a400
>[    1.890811] usb usb5: default language 0x0409
>[    1.890815] usb usb5: udev 1, busnum 5, minor = 512
>[    1.890817] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.890819] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.890821] usb usb5: Product: UHCI Host Controller
>[    1.890822] usb usb5: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty uhci_hcd
>[    1.890824] usb usb5: SerialNumber: 0000:00:1a.2
>[    1.890872] usb usb5: usb_probe_device
>[    1.890874] usb usb5: configuration #1 chosen from 1 choice
>[    1.890878] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    1.890914] hub 5-0:1.0: usb_probe_interface
>[    1.890915] hub 5-0:1.0: usb_probe_interface - got id
>[    1.890917] hub 5-0:1.0: USB hub found
>[    1.890920] hub 5-0:1.0: 2 ports detected
>[    1.890921] hub 5-0:1.0: standalone hub
>[    1.890923] hub 5-0:1.0: no power switching (usb 1.0)
>[    1.890924] hub 5-0:1.0: individual port over-current protection
>[    1.890926] hub 5-0:1.0: power on to power good time: 2ms
>[    1.890929] hub 5-0:1.0: local power source is good
>[    1.890930] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    1.890956] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
>[    1.890974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    1.890978] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    1.890981] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.890985] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    1.890990] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    1.890993] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.890995] uhci_hcd 0000:00:1d.0: Performing full reset
>[    1.891009] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    1.891013] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
>[    1.891036] usb usb6: default language 0x0409
>[    1.891042] usb usb6: udev 1, busnum 6, minor = 640
>[    1.891043] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.891045] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.891047] usb usb6: Product: UHCI Host Controller
>[    1.891048] usb usb6: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty uhci_hcd
>[    1.891050] usb usb6: SerialNumber: 0000:00:1d.0
>[    1.891100] usb usb6: usb_probe_device
>[    1.891102] usb usb6: configuration #1 chosen from 1 choice
>[    1.891107] usb usb6: adding 6-0:1.0 (config #1, interface 0)
>[    1.891140] hub 6-0:1.0: usb_probe_interface
>[    1.891142] hub 6-0:1.0: usb_probe_interface - got id
>[    1.891144] hub 6-0:1.0: USB hub found
>[    1.891147] hub 6-0:1.0: 2 ports detected
>[    1.891148] hub 6-0:1.0: standalone hub
>[    1.891149] hub 6-0:1.0: no power switching (usb 1.0)
>[    1.891150] hub 6-0:1.0: individual port over-current protection
>[    1.891152] hub 6-0:1.0: power on to power good time: 2ms
>[    1.891155] hub 6-0:1.0: local power source is good
>[    1.891156] hub 6-0:1.0: trying to enable port power on non-switchable hub
>[    1.891188] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
>[    1.891201] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    1.891206] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    1.891208] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.891212] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    1.891217] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    1.891221] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.891222] uhci_hcd 0000:00:1d.1: Performing full reset
>[    1.891234] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    1.891238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
>[    1.891264] usb usb7: default language 0x0409
>[    1.891269] usb usb7: udev 1, busnum 7, minor = 768
>[    1.891270] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.891272] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.891274] usb usb7: Product: UHCI Host Controller
>[    1.891276] usb usb7: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty uhci_hcd
>[    1.891277] usb usb7: SerialNumber: 0000:00:1d.1
>[    1.891327] usb usb7: usb_probe_device
>[    1.891329] usb usb7: configuration #1 chosen from 1 choice
>[    1.891334] usb usb7: adding 7-0:1.0 (config #1, interface 0)
>[    1.891367] hub 7-0:1.0: usb_probe_interface
>[    1.891369] hub 7-0:1.0: usb_probe_interface - got id
>[    1.891370] hub 7-0:1.0: USB hub found
>[    1.891375] hub 7-0:1.0: 2 ports detected
>[    1.891376] hub 7-0:1.0: standalone hub
>[    1.891377] hub 7-0:1.0: no power switching (usb 1.0)
>[    1.891379] hub 7-0:1.0: individual port over-current protection
>[    1.891380] hub 7-0:1.0: power on to power good time: 2ms
>[    1.891383] hub 7-0:1.0: local power source is good
>[    1.891385] hub 7-0:1.0: trying to enable port power on non-switchable hub
>[    1.891416] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
>[    1.891429] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.891434] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    1.891436] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.891440] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    1.891446] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    1.891449] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.891451] uhci_hcd 0000:00:1d.2: Performing full reset
>[    1.891463] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    1.891466] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880
>[    1.891490] usb usb8: default language 0x0409
>[    1.891495] usb usb8: udev 1, busnum 8, minor = 896
>[    1.891496] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.891498] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.891500] usb usb8: Product: UHCI Host Controller
>[    1.891501] usb usb8: Manufacturer: Linux 2.6.34-rc4-00054-g2ba3abd-dirty uhci_hcd
>[    1.891503] usb usb8: SerialNumber: 0000:00:1d.2
>[    1.891553] usb usb8: usb_probe_device
>[    1.891555] usb usb8: configuration #1 chosen from 1 choice
>[    1.891559] usb usb8: adding 8-0:1.0 (config #1, interface 0)
>[    1.891593] hub 8-0:1.0: usb_probe_interface
>[    1.891595] hub 8-0:1.0: usb_probe_interface - got id
>[    1.891596] hub 8-0:1.0: USB hub found
>[    1.891603] hub 8-0:1.0: 2 ports detected
>[    1.891605] hub 8-0:1.0: standalone hub
>[    1.891606] hub 8-0:1.0: no power switching (usb 1.0)
>[    1.891607] hub 8-0:1.0: individual port over-current protection
>[    1.891609] hub 8-0:1.0: power on to power good time: 2ms
>[    1.891612] hub 8-0:1.0: local power source is good
>[    1.891613] hub 8-0:1.0: trying to enable port power on non-switchable hub
>[    1.891645] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
>[    1.891703] usbcore: registered new interface driver usblp
>[    1.891705] Initializing USB Mass Storage driver...
>[    1.891748] usbcore: registered new interface driver usb-storage
>[    1.891749] USB Mass Storage support registered.
>[    1.891792] usbcore: registered new interface driver libusual
>[    1.891850] usbcore: registered new interface driver usbserial
>[    1.891852] usbserial: USB Serial Driver core
>[    1.891878] USB Serial support registered for IPWireless converter
>[    1.891905] usbcore: registered new interface driver ipwtty
>[    1.891907] ipw: v0.3:IPWireless tty driver
>[    1.891980] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    1.909080] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.909085] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.909160] mice: PS/2 mouse device common for all mice
>[    1.909893] rtc_cmos 00:03: RTC can wake from S4
>[    1.909946] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    1.909968] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.910039] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.910135] Linux video capture interface: v2.00
>[    1.910238] usbcore: registered new interface driver uvcvideo
>[    1.910239] USB Video Class driver (v0.1.0)
>[    1.910452] Bluetooth: Generic Bluetooth USB driver ver 0.6
>[    1.910482] usbcore: registered new interface driver btusb
>[    1.910719] cpuidle: using governor ladder
>[    1.911126] cpuidle: using governor menu
>[    1.911163] sdhci: Secure Digital Host Controller Interface driver
>[    1.911165] sdhci: Copyright(c) Pierre Ossman
>[    1.911177] sdhci-pci 0000:07:00.1: SDHCI controller found [197b:2382] (rev 0)
>[    1.911193] sdhci-pci 0000:07:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    1.911224] sdhci-pci 0000:07:00.1: setting latency timer to 64
>[    1.911292] mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA
>[    1.911301] sdhci-pci 0000:07:00.2: SDHCI controller found [197b:2381] (rev 0)
>[    1.911315] sdhci-pci 0000:07:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    1.911320] sdhci-pci 0000:07:00.2: Refusing to bind to secondary interface.
>[    1.911325] sdhci-pci 0000:07:00.2: PCI INT A disabled
>[    1.911506] jmb38x_ms 0000:07:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    1.911511] jmb38x_ms 0000:07:00.3: setting latency timer to 64
>[    1.912601] usbcore: registered new interface driver hiddev
>[    1.912640] usbcore: registered new interface driver usbhid
>[    1.912642] usbhid: USB HID core driver
>[    1.912772] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[    1.912805] HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
>[    1.912824] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    1.926219] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.931908] ALSA device list:
>[    1.931910]   #0: HDA Intel at 0xf8ef8000 irq 33
>[    1.931933] Netfilter messages via NETLINK v0.30.
>[    1.931950] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    1.932132] ctnetlink v0.93: registering with nfnetlink.
>[    1.932205] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.932227] TCP cubic registered
>[    1.932229] Initializing XFRM netlink socket
>[    1.932495] NET: Registered protocol family 10
>[    1.932640] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    1.932660] IPv6 over IPv4 tunneling driver
>[    1.932756] NET: Registered protocol family 17
>[    1.932760] Bluetooth: L2CAP ver 2.14
>[    1.932761] Bluetooth: L2CAP socket layer initialized
>[    1.932786] Bluetooth: RFCOMM TTY layer initialized
>[    1.932788] Bluetooth: RFCOMM socket layer initialized
>[    1.932790] Bluetooth: RFCOMM ver 1.11
>[    1.932791] lib80211: common routines for IEEE802.11 drivers
>[    1.932793] lib80211_crypt: registered algorithm 'NULL'
>[    1.975074] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
>[    1.989037] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
>[    1.989041] hub 2-0:1.0: port 2: status 0501 change 0001
>[    1.990064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    1.990070] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    1.990087] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
>[    1.990097] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    1.991047] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    1.991052] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    2.081813] [drm] nouveau 0000:08:00.0: 0xB9B3: parsing clock script 1
>[    2.089031] hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
>[    2.089038] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>[    2.140327] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
>[    2.140330] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
>[    2.140333] hub 2-0:1.0: port 2 not reset yet, waiting 50ms
>[    2.165084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.165627] ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
>[    2.165631] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.166407] ata1.00: configured for UDMA/100
>[    2.166530] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
>[    2.166867] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.166903] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[    2.166953] sd 0:0:0:0: [sda] Write Protect is off
>[    2.166955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.166972] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.167071]  sda:
>[    2.191032] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
>[    2.191050] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    2.191056] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
>[    2.193077]  sda1 sda2 sda3 sda4
>[    2.193565] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.204077] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[    2.204085] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
>[    2.204091] hub 6-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[    2.308032] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    2.410076] usb 6-2: new full speed USB device using uhci_hcd and address 2
>[    2.472414] ata2: SATA link down (SStatus 0 SControl 300)
>[    2.533031] usb 6-2: ep0 maxpacket = 32
>[    2.554080] usb 6-2: skipped 1 descriptor after interface
>[    2.554083] usb 6-2: skipped 1 descriptor after interface
>[    2.560078] usb 6-2: default language 0x0409
>[    2.571079] usb 6-2: udev 2, busnum 6, minor = 641
>[    2.571082] usb 6-2: New USB device found, idVendor=ffc0, idProduct=001f
>[    2.571084] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.571087] usb 6-2: Product: Gaming II
>[    2.571089] usb 6-2: Manufacturer: Areson
>[    2.571209] usb 6-2: usb_probe_device
>[    2.571212] usb 6-2: configuration #1 chosen from 1 choice
>[    2.574030] usb 6-2: adding 6-2:1.0 (config #1, interface 0)
>[    2.574084] usbhid 6-2:1.0: usb_probe_interface
>[    2.574086] usbhid 6-2:1.0: usb_probe_interface - got id
>[    2.577372] input: Areson Gaming II as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
>[    2.577567] generic-usb 0003:FFC0:001F.0001: input,hidraw0: USB HID v10.01 Mouse [Areson Gaming II] on usb-0000:00:1d.0-2/input0
>[    2.577579] usb 6-2: adding 6-2:1.1 (config #1, interface 1)
>[    2.577652] usbhid 6-2:1.1: usb_probe_interface
>[    2.577654] usbhid 6-2:1.1: usb_probe_interface - got id
>[    2.584245] input: Areson Gaming II as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5
>[    2.584252] uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
>[    2.584451] generic-usb 0003:FFC0:001F.0002: input,hidraw1: USB HID v10.01 Mouse [Areson Gaming II] on usb-0000:00:1d.0-2/input1
>[    2.584472] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[    2.820350] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
>[    2.893623] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>[    2.954069] usb usb3: suspend_rh (auto-stop)
>[    2.954088] usb usb4: suspend_rh (auto-stop)
>[    2.954106] usb usb5: suspend_rh (auto-stop)
>[    2.954128] usb usb7: suspend_rh (auto-stop)
>[    2.954145] usb usb8: suspend_rh (auto-stop)
>[    3.196042] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    3.209505] ata5.00: ATAPI: Optiarc DVD RW AD-7560S, SX01, max UDMA/100, ATAPI AN
>[    3.223984] ata5.00: configured for UDMA/100
>[    3.225629] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560S  SX01 PQ: 0 ANSI: 5
>[    3.231134] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    3.231136] Uniform CD-ROM driver Revision: 3.20
>[    3.231246] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[    3.231354] sr 4:0:0:0: Attached scsi generic sg1 type 5
>[    3.536047] ata6: SATA link down (SStatus 0 SControl 300)
>[    3.567099] registered taskstats version 1
>[    3.602025] EXT4-fs (sda2): mounted filesystem with ordered data mode
>[    3.602034] VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
>[    3.602053] Freeing unused kernel memory: 400k freed
>[    4.701272] hub 1-0:1.0: hub_suspend
>[    4.701278] usb usb1: bus auto-suspend
>[    4.701281] ehci_hcd 0000:00:1a.7: suspend root hub
>[    4.701302] hub 3-0:1.0: hub_suspend
>[    4.701304] usb usb3: bus auto-suspend
>[    4.701306] usb usb3: suspend_rh
>[    4.701320] hub 4-0:1.0: hub_suspend
>[    4.701323] usb usb4: bus auto-suspend
>[    4.701324] usb usb4: suspend_rh
>[    4.701337] hub 5-0:1.0: hub_suspend
>[    4.701340] usb usb5: bus auto-suspend
>[    4.701341] usb usb5: suspend_rh
>[    4.701355] hub 7-0:1.0: hub_suspend
>[    4.701357] usb usb7: bus auto-suspend
>[    4.701359] usb usb7: suspend_rh
>[    4.701372] hub 8-0:1.0: hub_suspend
>[    4.701374] usb usb8: bus auto-suspend
>[    4.701376] usb usb8: suspend_rh
>[    4.701389] hub 2-0:1.0: hub_suspend
>[    4.701391] usb usb2: bus auto-suspend
>[    4.701393] ehci_hcd 0000:00:1d.7: suspend root hub
>[    5.694901] udev: starting version 151
>[    6.091145] iwlagn 0000:06:00.0: loaded firmware version 8.24.2.12
>[    6.091563] phy0: Selected rate control algorithm 'iwl-agn-rs'
>[    7.643474] EXT4-fs (sda4): mounted filesystem with ordered data mode
>[    9.548226] Adding 2000088k swap on /dev/sda3.  Priority:-1 extents:1 across:2000088k 
>[   20.758123] r8169 0000:02:00.0: eth0: link up
>[   20.758129] r8169 0000:02:00.0: eth0: link up
>[   31.018013] eth0: no IPv6 routers present
>[   31.926315] [drm] nouveau 0000:08:00.0: Allocating FIFO number 2
>[   31.931985] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 2
>[   32.082819] [drm] nouveau 0000:08:00.0: Allocating FIFO number 3
>[   32.088476] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 3
>[   32.872121] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 17 us
>[   34.851374] [drm] nouveau 0000:08:00.0: Allocating FIFO number 4
>[   34.857115] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 4
>[   99.042233] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 4
>[   99.080290] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 17 us
>[   99.148431] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 3
>[   99.153613] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 2
>[  106.291190] [drm] nouveau 0000:08:00.0: Allocating FIFO number 2
>[  106.296951] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 2
>[  106.314962] [drm] nouveau 0000:08:00.0: Allocating FIFO number 3
>[  106.320656] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 3
>[  106.541374] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 17 us
>[  207.501772] [drm] nouveau 0000:08:00.0: Allocating FIFO number 4
>[  207.508702] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 4
>[  207.597642] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 4
>[  242.254492] [drm] nouveau 0000:08:00.0: Allocating FIFO number 4
>[  242.260202] [drm] nouveau 0000:08:00.0: nouveau_channel_alloc: initialised FIFO 4
>[  253.841221] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 4
>[ 1192.905483] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - RESERVED_CMD
>[ 1192.905490] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 00000016 data: 00000003
>[ 1192.924067] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - RESERVED_CMD
>[ 1192.924075] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 964c4c4c data: 96484848
>[ 1192.924871] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.924877] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 102c0004 data: 03e9058d
>[ 1192.924893] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.924899] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10280004 data: 00042050
>[ 1192.924912] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1818 Data 0x18181818:0x18181818
>[ 1192.924923] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x181c Data 0x18181818:0x18181818
>[ 1192.924934] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1820 Data 0x18181818:0x18181818
>[ 1192.924944] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1824 Data 0x18181818:0x18181818
>[ 1192.924954] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1828 Data 0x18181818:0x18181818
>[ 1192.924965] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x182c Data 0x18181818:0x18181818
>[ 1192.924975] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1830 Data 0x18181818:0x18181818
>[ 1192.924986] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1834 Data 0x18181818:0x18181818
>[ 1192.924996] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1838 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x183c Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1840 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1844 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1848 Data 0x15151515:0x407c4860
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x184c Data 0x15151515:0x15151515
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1850 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1854 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1858 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x185c Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1860 Data 0x18181818:0x18181818
>[ 1192.925003] [drm] nouveau 0000:08:00.0: PGRAPH_ILLEGAL_MTHD - Ch 2/0 Class 0x5039 Mthd 0x1864 Data 0x18181818:0x18181818
>[ 1192.929099] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x03e9058d
>[ 1192.929105] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929110] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10240004 data: 00144200
>[ 1192.929129] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929136] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10200004 data: 00042050
>[ 1192.929155] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929160] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 101c0004 data: 00144200
>[ 1192.929175] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929181] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10180004 data: 00042050
>[ 1192.929208] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929214] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10140004 data: 00086184
>[ 1192.929229] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929235] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10100004 data: 00042050
>[ 1192.929255] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929261] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 100c0004 data: 00144200
>[ 1192.929279] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929284] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10080004 data: 00042050
>[ 1192.929302] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929308] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10040004 data: 00144200
>[ 1192.929325] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929330] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 10000004 data: 00042050
>[ 1192.929348] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929354] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0ffc0004 data: 00144200
>[ 1192.929370] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929376] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0ff80004 data: 00042050
>[ 1192.929393] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929399] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0ff40004 data: 00044110
>[ 1192.929416] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929421] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0ff00004 data: 00042050
>[ 1192.929437] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929443] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fec0004 data: 00144200
>[ 1192.929460] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.929465] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fe80004 data: 00042050
>[ 1192.929610] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.930073] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.930538] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.931005] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.931479] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.931958] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00086184
>[ 1192.932063] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.932069] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fe40004 data: 00144200
>[ 1192.932086] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.932092] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fe00004 data: 00042050
>[ 1192.932434] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.932905] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.933377] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.933858] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.933946] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.933953] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fdc0004 data: 40104860
>[ 1192.933971] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.933978] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fd80004 data: 00042050
>[ 1192.934340] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.934816] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.935050] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.935057] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fd40004 data: 00144200
>[ 1192.935079] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.935085] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fd00004 data: 00042050
>[ 1192.935301] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.935774] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00044110
>[ 1192.936252] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.936539] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.936545] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fcc0004 data: 00044110
>[ 1192.936565] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1192.936572] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fc80004 data: 00042050
>[ 1192.936730] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.937199] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.937668] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.938137] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.938606] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x40104860
>[ 1192.939075] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.939543] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00144200
>[ 1192.940019] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1192.940498] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00044110
>[ 1192.940964] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1202.584265] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) 
>[ 1213.213263] SysRq : Keyboard mode set to system default
>[ 1213.635101] SysRq : SAK
>[ 1213.635113] SAK: killed process 2034 (X): task_session(p)==tty->session
>[ 1213.635167] SAK: killed process 2034 (X): task_session(p)==tty->session
>[ 1213.636892] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 2
>[ 1213.636920] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - Ch 2 - NON_CACHE
>[ 1213.636929] [drm] nouveau 0000:08:00.0: PFIFO_DMA_PUSHER - jump: 00000000 rsvd: 0fc40004 data: 00042050
>[ 1213.637371] [drm] nouveau 0000:08:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x00042050
>[ 1216.636002] [drm] nouveau 0000:08:00.0: Failed to idle channel 2.
>[ 1216.641221] [drm] nouveau 0000:08:00.0: nouveau_channel_free: freeing fifo 3
>[ 1216.675475] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 17 us
>[ 1217.233184] PM: Syncing filesystems ... done.
>[ 1217.441209] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 1217.452088] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1217.463114] Suspending console(s) (use no_console_suspend to debug)
>[ 1217.467443] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1217.468498] uhci_hcd 0000:00:1d.0: release dev 2 ep82-INT, period 1, phase 0, 23 us
>[ 1217.468520] usb 6-2: usb suspend
>[ 1217.525817] sd 0:0:0:0: [sda] Stopping disk
>[ 1217.545985] hub 6-0:1.0: hub_suspend
>[ 1217.545988] usb usb6: bus suspend
>[ 1217.545990] usb usb6: suspend_rh
>[ 1217.546182] ACPI handle has no context!
>[ 1217.546284] jmb38x_ms 0000:07:00.3: PCI INT A disabled
>[ 1217.546621] sdhci-pci 0000:07:00.1: PCI INT A disabled
>[ 1217.546659] [drm] nouveau 0000:08:00.0: Disabling fbcon acceleration...
>[ 1217.546661] [drm] nouveau 0000:08:00.0: Unpinning framebuffer(s)...
>[ 1217.546662] [drm] nouveau 0000:08:00.0: Evicting buffers...
>[ 1217.546664] [drm] nouveau 0000:08:00.0: Idling channels...
>[ 1217.546915] [drm] nouveau 0000:08:00.0: Suspending GPU objects...
>[ 1217.548399] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[ 1217.548404] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
>[ 1217.548420] uhci_hcd 0000:00:1d.2: PCI INT C disabled
>[ 1217.548424] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
>[ 1217.548442] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[ 1217.548445] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
>[ 1217.548460] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[ 1217.549131] ehci_hcd 0000:00:1a.7: PCI INT C disabled
>[ 1217.549136] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
>[ 1217.549151] uhci_hcd 0000:00:1a.2: PCI INT D disabled
>[ 1217.549155] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
>[ 1217.549179] uhci_hcd 0000:00:1a.1: PCI INT B disabled
>[ 1217.549183] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
>[ 1217.549206] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[ 1217.650401] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[ 1218.137663] [drm] nouveau 0000:08:00.0: And we're gone!
>[ 1218.137702] nouveau 0000:08:00.0: PCI INT A disabled
>[ 1218.523017] PM: suspend of devices complete after 1059.563 msecs
>[ 1218.523290] r8169 0000:02:00.0: PME# enabled
>[ 1218.523299] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[ 1218.534082] ehci_hcd 0000:00:1d.7: wakeup: 0
>[ 1218.545011] ehci_hcd 0000:00:1d.7: --> PCI D3hot
>[ 1218.545031] uhci_hcd 0000:00:1d.2: wakeup: 0
>[ 1218.545033] uhci_hcd 0000:00:1d.2: --> PCI D0
>[ 1218.545053] uhci_hcd 0000:00:1d.1: wakeup: 0
>[ 1218.545055] uhci_hcd 0000:00:1d.1: --> PCI D0
>[ 1218.545075] uhci_hcd 0000:00:1d.0: wakeup: 0
>[ 1218.545076] uhci_hcd 0000:00:1d.0: --> PCI D0
>[ 1218.545103] ehci_hcd 0000:00:1a.7: wakeup: 0
>[ 1218.556263] ehci_hcd 0000:00:1a.7: --> PCI D3hot
>[ 1218.556283] uhci_hcd 0000:00:1a.2: wakeup: 0
>[ 1218.556285] uhci_hcd 0000:00:1a.2: --> PCI D0
>[ 1218.556305] uhci_hcd 0000:00:1a.1: wakeup: 0
>[ 1218.556307] uhci_hcd 0000:00:1a.1: --> PCI D0
>[ 1218.556327] uhci_hcd 0000:00:1a.0: wakeup: 0
>[ 1218.556328] uhci_hcd 0000:00:1a.0: --> PCI D0
>[ 1218.556353] PM: late suspend of devices complete after 33.332 msecs
>[ 1218.556848] ACPI: Preparing to enter system sleep state S3
>[ 1218.557605] Disabling non-boot CPUs ...
>[ 1218.574525] CPU 1 is now offline
>[ 1218.574527] SMP alternatives: switching to UP code
>[ 1218.580066] Back to C!
>[ 1218.580066] Enabling non-boot CPUs ...
>[ 1218.580066] SMP alternatives: switching to SMP code
>[ 1218.585434] Booting Node 0 Processor 1 APIC 0x1
>[ 1218.662263] CPU1 is up
>[ 1218.662730] ACPI: Waking up from system sleep state S3
>[ 1218.663199] pcieport 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
>[ 1218.663204] pcieport 0000:00:01.0: restoring config space at offset 0x6 (was 0x80000, writing 0x80800)
>[ 1218.663209] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[ 1218.663240] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[ 1218.663270] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[ 1218.663296] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[ 1218.663329] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[ 1218.663362] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1218.663366] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[ 1218.663391] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
>[ 1218.663398] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
>[ 1218.663406] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1218.663410] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507)
>[ 1218.663440] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020a)
>[ 1218.663450] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x2000d0d0, writing 0xd0d0)
>[ 1218.663456] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1218.663460] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[ 1218.663489] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x2030b)
>[ 1218.663497] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041)
>[ 1218.663500] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0xc030c020)
>[ 1218.663504] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x200000f0, writing 0x1010)
>[ 1218.663510] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1218.663514] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
>[ 1218.663543] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x20400, writing 0x2040f)
>[ 1218.663551] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc071c061)
>[ 1218.663555] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
>[ 1218.663561] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1218.663565] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
>[ 1218.663594] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x2020a)
>[ 1218.663602] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc091c081)
>[ 1218.663606] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x200000f0, writing 0x3030)
>[ 1218.663612] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1218.663617] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
>[ 1218.663655] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[ 1218.663681] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[ 1218.663707] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[ 1218.663739] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[ 1218.663757] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
>[ 1218.663827] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[ 1218.663874] nouveau 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfeb80000)
>[ 1218.663879] nouveau 0000:08:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xec01)
>[ 1218.663883] nouveau 0000:08:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xfa000004)
>[ 1218.663887] nouveau 0000:08:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
>[ 1218.663890] nouveau 0000:08:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfd000000)
>[ 1218.663894] nouveau 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1218.663937] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>[ 1218.663945] r8169 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xf8fc0000)
>[ 1218.663958] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8fff004)
>[ 1218.663965] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xc801)
>[ 1218.663970] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1218.663976] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>[ 1218.664050] iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
>[ 1218.664077] iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf9efe004)
>[ 1218.664083] iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1218.664092] iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
>[ 1218.664158] pci 0000:07:00.0: restoring config space at offset 0xf (was 0x109, writing 0x105)
>[ 1218.664174] pci 0000:07:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xf9ffec00)
>[ 1218.664180] pci 0000:07:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xf9fff000)
>[ 1218.664193] pci 0000:07:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>[ 1218.664201] pci 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[ 1218.664239] sdhci-pci 0000:07:00.1: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
>[ 1218.664263] sdhci-pci 0000:07:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xf9ffe800)
>[ 1218.664268] sdhci-pci 0000:07:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>[ 1218.664275] sdhci-pci 0000:07:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[ 1218.664310] pci 0000:07:00.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
>[ 1218.664332] pci 0000:07:00.2: restoring config space at offset 0x4 (was 0x0, writing 0xf9ffe400)
>[ 1218.664337] pci 0000:07:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>[ 1218.664343] pci 0000:07:00.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
>[ 1218.664379] jmb38x_ms 0000:07:00.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
>[ 1218.664400] jmb38x_ms 0000:07:00.3: restoring config space at offset 0x4 (was 0x0, writing 0xf9ffe000)
>[ 1218.664405] jmb38x_ms 0000:07:00.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>[ 1218.664412] jmb38x_ms 0000:07:00.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[ 1218.664447] pci 0000:07:00.4: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
>[ 1218.664469] pci 0000:07:00.4: restoring config space at offset 0x4 (was 0x0, writing 0xf9ffdc00)
>[ 1218.664474] pci 0000:07:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>[ 1218.664480] pci 0000:07:00.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[ 1218.664532] PM: early resume of devices complete after 1.372 msecs
>[ 1218.664594] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[ 1218.664600] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 1218.664603] uhci_hcd 0000:00:1a.0: uhci_pci_resume
>[ 1218.664606] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
>[ 1218.664607] uhci_hcd 0000:00:1a.0: Performing full reset
>[ 1218.664624] usb usb3: root hub lost power or was reset
>[ 1218.664626] usb usb3: suspend_rh
>[ 1218.664640] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[ 1218.664645] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[ 1218.664647] uhci_hcd 0000:00:1a.1: uhci_pci_resume
>[ 1218.664650] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
>[ 1218.664651] uhci_hcd 0000:00:1a.1: Performing full reset
>[ 1218.664667] usb usb4: root hub lost power or was reset
>[ 1218.664668] usb usb4: suspend_rh
>[ 1218.664669] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[ 1218.664674] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[ 1218.664677] uhci_hcd 0000:00:1a.2: uhci_pci_resume
>[ 1218.664680] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000
>[ 1218.664683] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[ 1218.664684] uhci_hcd 0000:00:1a.2: Performing full reset
>[ 1218.664690] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 1218.664701] usb usb5: root hub lost power or was reset
>[ 1218.664702] usb usb5: suspend_rh
>[ 1218.664705] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[ 1218.664710] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[ 1218.664752] HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
>[ 1218.664758] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[ 1218.664765] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 1218.664768] uhci_hcd 0000:00:1d.0: uhci_pci_resume
>[ 1218.664771] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
>[ 1218.664772] uhci_hcd 0000:00:1d.0: Performing full reset
>[ 1218.664790] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[ 1218.664790] usb usb6: root hub lost power or was reset
>[ 1218.664792] usb usb6: suspend_rh
>[ 1218.664794] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 1218.664798] uhci_hcd 0000:00:1d.1: uhci_pci_resume
>[ 1218.664801] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>[ 1218.664802] uhci_hcd 0000:00:1d.1: Performing full reset
>[ 1218.664816] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[ 1218.664819] usb usb7: root hub lost power or was reset
>[ 1218.664821] usb usb7: suspend_rh
>[ 1218.664821] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 1218.664825] uhci_hcd 0000:00:1d.2: uhci_pci_resume
>[ 1218.664828] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
>[ 1218.664829] uhci_hcd 0000:00:1d.2: Performing full reset
>[ 1218.664835] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[ 1218.664841] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 1218.664847] usb usb8: root hub lost power or was reset
>[ 1218.664848] usb usb8: suspend_rh
>[ 1218.664856] pci 0000:00:1e.0: setting latency timer to 64
>[ 1218.664863] [drm] nouveau 0000:08:00.0: We're back, enabling device...
>[ 1218.664865] ahci 0000:00:1f.2: setting latency timer to 64
>[ 1218.664867] nouveau 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[ 1218.664872] nouveau 0000:08:00.0: setting latency timer to 64
>[ 1218.664875] [drm] nouveau 0000:08:00.0: POSTing device...
>[ 1218.664881] [drm] nouveau 0000:08:00.0: Parsing VBIOS init table 0 at offset 0xD51F
>[ 1218.664914] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[ 1218.664929] r8169 0000:02:00.0: PME# disabled
>[ 1218.664957] sdhci-pci 0000:07:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[ 1218.664965] iwlagn 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[ 1218.664973] sdhci-pci 0000:07:00.1: setting latency timer to 64
>[ 1218.664988] jmb38x_ms 0000:07:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[ 1218.664993] jmb38x_ms 0000:07:00.3: setting latency timer to 64
>[ 1218.665045] usb usb2: usb resume
>[ 1218.665048] ehci_hcd 0000:00:1d.7: resume root hub
>[ 1218.665064] usb usb1: usb resume
>[ 1218.665066] ehci_hcd 0000:00:1a.7: resume root hub
>[ 1218.665112] usb usb3: usb resume
>[ 1218.665113] usb usb3: wakeup_rh
>[ 1218.665134] usb usb4: usb resume
>[ 1218.665135] usb usb4: wakeup_rh
>[ 1218.665155] usb usb5: usb resume
>[ 1218.665156] usb usb5: wakeup_rh
>[ 1218.665175] usb usb6: usb resume
>[ 1218.665176] usb usb6: wakeup_rh
>[ 1218.665196] usb usb7: usb resume
>[ 1218.665198] usb usb7: wakeup_rh
>[ 1218.665217] usb usb8: usb resume
>[ 1218.665218] usb usb8: wakeup_rh
>[ 1218.665241] sd 0:0:0:0: [sda] Starting disk
>[ 1218.669563] r8169 0000:02:00.0: eth0: link down
>[ 1218.685189] hub 1-0:1.0: hub_resume
>[ 1218.694263] [drm] nouveau 0000:08:00.0: Parsing VBIOS init table 1 at offset 0xD910
>[ 1218.700077] hub 3-0:1.0: hub_reset_resume
>[ 1218.700079] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[ 1218.700085] hub 4-0:1.0: hub_reset_resume
>[ 1218.700086] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[ 1218.700090] hub 5-0:1.0: hub_reset_resume
>[ 1218.700091] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[ 1218.700095] hub 6-0:1.0: hub_reset_resume
>[ 1218.700096] hub 6-0:1.0: trying to enable port power on non-switchable hub
>[ 1218.700100] hub 7-0:1.0: hub_reset_resume
>[ 1218.700101] hub 7-0:1.0: trying to enable port power on non-switchable hub
>[ 1218.700105] hub 8-0:1.0: hub_reset_resume
>[ 1218.700106] hub 8-0:1.0: trying to enable port power on non-switchable hub
>[ 1218.714591] hub 2-0:1.0: hub_resume
>[ 1218.761084] [drm] nouveau 0000:08:00.0: Parsing VBIOS init table 2 at offset 0xE8D9
>[ 1218.761124] [drm] nouveau 0000:08:00.0: Parsing VBIOS init table 3 at offset 0xEA22
>[ 1218.764162] [drm] nouveau 0000:08:00.0: Parsing VBIOS init table 4 at offset 0xEC8A
>[ 1218.764164] [drm] nouveau 0000:08:00.0: Parsing VBIOS init table at offset 0xECEF
>[ 1218.785022] [drm] nouveau 0000:08:00.0: 0xB9B8: parsing output script 0
>[ 1218.785026] [drm] nouveau 0000:08:00.0: 0xBD90: parsing output script 0
>[ 1218.785072] [drm] nouveau 0000:08:00.0: Reinitialising engines...
>[ 1218.787415] [drm] nouveau 0000:08:00.0: Restoring GPU objects...
>[ 1218.801317] uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
>[ 1218.801319] hub 6-0:1.0: port 2: status 0101 change 0003
>[ 1218.806049] [drm] nouveau 0000:08:00.0: Restoring mode...
>[ 1218.813905] [drm] nouveau 0000:08:00.0: 0xB9BC: parsing output script 1
>[ 1218.813935] [drm] nouveau 0000:08:00.0: 0xB873: parsing clock script 0
>[ 1218.902350] usb 6-2: finish reset-resume
>[ 1218.972109] ata2: SATA link down (SStatus 0 SControl 300)
>[ 1218.974108] ata6: SATA link down (SStatus 0 SControl 300)
>[ 1218.988093] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1219.004105] usb 6-2: reset full speed USB device using uhci_hcd and address 2
>[ 1219.068354] [drm] nouveau 0000:08:00.0: 0xB9B3: parsing clock script 1
>[ 1219.082845] ata5.00: configured for UDMA/100
>[ 1219.125101] usb 6-2: ep0 maxpacket = 32
>[ 1219.141400] uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
>[ 1219.544807] r8169 0000:02:00.0: eth0: link up
>[ 1219.704101] usb usb3: suspend_rh (auto-stop)
>[ 1219.704120] usb usb4: suspend_rh (auto-stop)
>[ 1219.704138] usb usb5: suspend_rh (auto-stop)
>[ 1219.704157] usb usb7: suspend_rh (auto-stop)
>[ 1219.704177] usb usb8: suspend_rh (auto-stop)
>[ 1221.072108] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1221.074089] ata1.00: configured for UDMA/100
>[ 1221.091402] PM: resume of devices complete after 2426.840 msecs
>[ 1221.091632] Restarting tasks ... 
>[ 1221.091675] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
>[ 1221.091682] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>[ 1221.091685] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[ 1221.091688] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[ 1221.091691] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[ 1221.091694] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[ 1221.091697] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[ 1221.091700] hub 6-0:1.0: state 7 ports 2 chg 0004 evt 0000
>[ 1221.091708] hub 6-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
>[ 1221.092485] done.
>[ 1223.701107] hub 1-0:1.0: hub_suspend
>[ 1223.701115] usb usb1: bus auto-suspend
>[ 1223.701118] ehci_hcd 0000:00:1a.7: suspend root hub
>[ 1223.701140] hub 2-0:1.0: hub_suspend
>[ 1223.701143] usb usb2: bus auto-suspend
>[ 1223.701145] ehci_hcd 0000:00:1d.7: suspend root hub
>[ 1223.701169] hub 3-0:1.0: hub_suspend
>[ 1223.701172] usb usb3: bus auto-suspend
>[ 1223.701174] usb usb3: suspend_rh
>[ 1223.701187] hub 4-0:1.0: hub_suspend
>[ 1223.701190] usb usb4: bus auto-suspend
>[ 1223.701191] usb usb4: suspend_rh
>[ 1223.701204] hub 5-0:1.0: hub_suspend
>[ 1223.701206] usb usb5: bus auto-suspend
>[ 1223.701208] usb usb5: suspend_rh
>[ 1223.701221] hub 7-0:1.0: hub_suspend
>[ 1223.701223] usb usb7: bus auto-suspend
>[ 1223.701225] usb usb7: suspend_rh
>[ 1223.701238] hub 8-0:1.0: hub_suspend
>[ 1223.701240] usb usb8: bus auto-suspend
>[ 1223.701241] usb usb8: suspend_rh

Actions: View

Attachments on bug 26733: 34822 | 35000 | 35323 | 35865 | 56934

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.