Attachment 36218 Details for Bug 28500 – dmesg output

dmesg output

dmesg.txt (text/plain), 29.10 KB, created by SpOeK@DistroBit.Net on 2010-06-11 09:41:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: SpOeK@DistroBit.Net

Created: 2010-06-11 09:41:28 UTC

Size: 29.10 KB

patch

obsolete

>Linux version 2.6.35-rc2+ (root@menzoberranzan) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #5 SMP PREEMPT Wed Jun 9 22:34:04 CEST 2010
>Command line: root=/dev/sda2 rootfstype=ext4 quiet splash=silent,fadein,theme:natural_gentoo console=tty1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>found SMP MP-table at [ffff8800000ff780] ff780
>init_memory_mapping: 0000000000000000-000000007ffb0000
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007ffb0000 page 4k
>kernel direct mapping tables up to 7ffb0000 @ 12000-16000
>RAMDISK: 37f95000 - 37ff0000
>ACPI: RSDP 00000000000f7a10 00014 (v00 ACPIAM)
>ACPI: RSDT 000000007ffb0000 00038 (v01 A_M_I  OEMRSDT  06000726 MSFT 00000097)
>ACPI: FACP 000000007ffb0200 00084 (v02 A_M_I  OEMFACP  12000601 MSFT 00000097)
>ACPI: DSDT 000000007ffb0440 05077 (v01  C45LG C45LG181 00000181 INTL 02002026)
>ACPI: FACS 000000007ffc0000 00040
>ACPI: APIC 000000007ffb0390 0006C (v01 A_M_I  OEMAPIC  06000726 MSFT 00000097)
>ACPI: MCFG 000000007ffb0400 0003C (v01 A_M_I  OEMMCFG  06000726 MSFT 00000097)
>ACPI: OEMB 000000007ffc0040 00046 (v01 A_M_I  AMI_OEM  06000726 MSFT 00000097)
>ACPI: HPET 000000007ffb54c0 00038 (v01 A_M_I  OEMHPET  06000726 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ffb0
>On node 0 totalpages: 524095
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3927 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513001 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>early_res array is doubled to 64 at [14000 - 147ff]
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ed00000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880001600000 s77568 r8192 d20736 u1048576
>pcpu-alloc: s77568 r8192 d20736 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516928
>Kernel command line: root=/dev/sda2 rootfstype=ext4 quiet splash=silent,fadein,theme:natural_gentoo console=tty1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Subtract (46 early reservations)
>  #1 [0001000000 - 0001553634]   TEXT DATA BSS
>  #2 [0037f95000 - 0037ff0000]         RAMDISK
>  #3 [0001554000 - 000155412b]             BRK
>  #4 [00000ff790 - 0000100000]   BIOS reserved
>  #5 [00000ff780 - 00000ff790]    MP-table mpf
>  #6 [000009fc00 - 00000fb8f0]   BIOS reserved
>  #7 [00000fba40 - 00000ff780]   BIOS reserved
>  #8 [00000fb8f0 - 00000fba40]    MP-table mpc
>  #9 [0000010000 - 0000012000]      TRAMPOLINE
>  #10 [0000012000 - 0000014000]         PGTABLE
>  #11 [0001554180 - 0001555180]         BOOTMEM
>  #12 [0001553680 - 0001553780]         BOOTMEM
>  #13 [0001d56000 - 0001d57000]         BOOTMEM
>  #14 [0001d57000 - 0001d58000]         BOOTMEM
>  #15 [0001e00000 - 0003a00000]        MEMMAP 0
>  #16 [0001553780 - 0001553900]         BOOTMEM
>  #17 [0001555180 - 0001561180]         BOOTMEM
>  #18 [0001562000 - 0001563000]         BOOTMEM
>  #19 [0001553900 - 0001553941]         BOOTMEM
>  #20 [0001553980 - 00015539c3]         BOOTMEM
>  #21 [0001553a00 - 0001553c68]         BOOTMEM
>  #22 [0001553c80 - 0001553ce8]         BOOTMEM
>  #23 [0001553d00 - 0001553d68]         BOOTMEM
>  #24 [0001553d80 - 0001553de8]         BOOTMEM
>  #25 [0001553e00 - 0001553e68]         BOOTMEM
>  #26 [0001553e80 - 0001553ee8]         BOOTMEM
>  #27 [0001553f00 - 0001553f68]         BOOTMEM
>  #28 [0001553f80 - 0001553fe8]         BOOTMEM
>  #29 [0001561180 - 00015611e8]         BOOTMEM
>  #30 [0001561200 - 0001561268]         BOOTMEM
>  #31 [0001561280 - 00015612e8]         BOOTMEM
>  #32 [0001561300 - 000156135c]         BOOTMEM
>  #33 [0001561380 - 00015613dc]         BOOTMEM
>  #34 [0001600000 - 000161a000]         BOOTMEM
>  #35 [0001700000 - 000171a000]         BOOTMEM
>  #36 [0001561400 - 0001561408]         BOOTMEM
>  #37 [0001561480 - 0001561488]         BOOTMEM
>  #38 [0001561500 - 0001561508]         BOOTMEM
>  #39 [0001561580 - 0001561590]         BOOTMEM
>  #40 [0001561600 - 0001561740]         BOOTMEM
>  #41 [0001561780 - 00015617e0]         BOOTMEM
>  #42 [0001561800 - 0001561860]         BOOTMEM
>  #43 [0001563000 - 000156b000]         BOOTMEM
>  #44 [000171a000 - 000191a000]         BOOTMEM
>  #45 [000191a000 - 0001a1a000]         BOOTMEM
>Memory: 2058492k/2096832k available (3259k kernel code, 452k absent, 37888k reserved, 1522k data, 440k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Preemptable hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:320
>Console: colour VGA+ 80x25
>console [tty1] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3199.811 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.62 BogoMIPS (lpj=3199811)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>... version:                0
>... bit width:              40
>... generic registers:      18
>... value mask:             000000ffffffffff
>... max period:             0000007fffffffff
>... fixed-purpose events:   0
>... event mask:             000000000003ffff
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20100428
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (12799.69 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT 000000007ffc0090 001D2 (v01    AMI   CPU1PM 00000001 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 001D2 (v01    AMI   CPU1PM 00000001 INTL 20051117)
>ACPI: SSDT 000000007ffc0270 00143 (v01    AMI   CPU2PM 00000001 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20051117)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xdfefc000-0xdfefffff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xc480-0xc49f]
>pci 0000:00:1d.1: reg 20: [io  0xc800-0xc81f]
>pci 0000:00:1d.2: reg 20: [io  0xc880-0xc89f]
>pci 0000:00:1d.3: reg 20: [io  0xcc00-0xcc1f]
>pci 0000:00:1d.7: reg 10: [mem 0xdfefbc00-0xdfefbfff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 003f)
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
>pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: reg 10: [io  0xc400-0xc407]
>pci 0000:00:1f.2: reg 14: [io  0xc080-0xc083]
>pci 0000:00:1f.2: reg 18: [io  0xc000-0xc007]
>pci 0000:00:1f.2: reg 1c: [io  0xbc00-0xbc03]
>pci 0000:00:1f.2: reg 20: [io  0xb880-0xb88f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:04:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
>pci 0000:04:00.0: reg 14: [io  0xe000-0xe0ff]
>pci 0000:04:00.0: reg 18: [mem 0xf0000000-0xf000ffff]
>pci 0000:04:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.1: reg 10: [mem 0xfeaf0000-0xfeafffff]
>pci 0000:04:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 04-04]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xfeafffff]
>pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xbff00000-0xbfffffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.1:   bridge window [mem 0xbfe00000-0xbfefffff 64bit pref]
>pci 0000:01:00.0: reg 10: [io  0xd800-0xd8ff]
>pci 0000:01:00.0: reg 18: [mem 0xdffff000-0xdfffffff 64bit]
>pci 0000:01:00.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:1c.2: PCI bridge to [bus 01-01]
>pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.2:   bridge window [mem 0xdff00000-0xdfffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:05:00.0: reg 10: [mem 0xfebf0000-0xfebfffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000007ffb0000 - 000000007fffffff 
>cfg80211: Calling CRDA to update world regulatory domain
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
>system 00:06: [io  0x04d0-0x04d1] has been reserved
>system 00:06: [io  0x0800-0x087f] has been reserved
>system 00:06: [io  0x0480-0x04bf] has been reserved
>system 00:06: [io  0x0900-0x090f] has been reserved
>system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:09: [mem 0xffc00000-0xfff7ffff] has been reserved
>system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: [io  0x0290-0x029f] has been reserved
>system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
>system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
>pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x803fffff]
>pci 0000:00:1c.1: BAR 8: assigned [mem 0x80400000-0x807fffff]
>pci 0000:00:1c.2: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.1: BAR 7: assigned [io  0x2000-0x2fff]
>pci 0000:00:01.0: PCI bridge to [bus 04-04]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xfeafffff]
>pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xbff00000-0xbfffffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x807fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xbfe00000-0xbfefffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 01-01]
>pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.2:   bridge window [mem 0xdff00000-0xdfffffff]
>pci 0000:00:1c.2:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: enabling device (0106 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: enabling device (0106 -> 0107)
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:04: resource 1 [mem 0xf0000000-0xfeafffff]
>pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:03: resource 1 [mem 0x80000000-0x803fffff]
>pci_bus 0000:03: resource 2 [mem 0xbff00000-0xbfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0x80400000-0x807fffff]
>pci_bus 0000:02: resource 2 [mem 0xbfe00000-0xbfefffff 64bit pref]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xdff00000-0xdfffffff]
>pci_bus 0000:01: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
>pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:04:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 364k freed
>microcode: CPU0 sig=0xf43, pf=0x10, revision=0x5
>microcode: CPU1 sig=0xf43, pf=0x10, revision=0x5
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>msgmni has been set to 4021
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>ata2: port disabled. ignoring.
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
>ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:01:00.0: setting latency timer to 64
>r8169 0000:01:00.0: irq 44 for MSI/MSI-X
>r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc9000003a000, 00:13:8f:e1:0e:ee, XID 18000000 IRQ 44
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdfefbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>w83627ehf: Found W83627EHG chip at 0x290
>w83627ehf w83627ehf.656: Setting VID input voltage to VRM10
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ALSA device list:
>  No soundcards found.
>TCP cubic registered
>NET: Registered protocol family 17
>registered taskstats version 1
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ata3.00: ATA-7: ST3250310AS, 3.AAB, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66
>ata1.00: configured for UDMA/66
>ata3.00: configured for UDMA/133
>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12N  UL01 PQ: 0 ANSI: 5
>scsi 2:0:0:0: Direct-Access     ATA      ST3250310AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 2:0:0:0: [sda] Attached SCSI disk
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 440k freed
>usb 1-5: new high speed USB device using ehci_hcd and address 3
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
>generic-usb 0003:046E:52A3.0001: input: USB HID v1.10 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.0-2/input0
>input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
>generic-usb 0003:046E:52A3.0002: input: USB HID v1.10 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.0-2/input1
>udev: starting version 149
>Initializing USB Mass Storage driver...
>scsi4 : usb-storage 1-5:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ath5k 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ath5k 0000:05:00.0: registered as 'phy0'
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>hda_intel: msi for device 1849:0888 set to 0
>hda_intel: position_fix set to 1 for device 1849:0888
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>[drm] Initialized drm 1.1.0 20060810
>hda_codec: ALC888: BIOS auto-probing.
>ath: EEPROM regdomain: 0x30
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: AM
>ath: Regpair used: 0x30
>phy0: Selected rate control algorithm 'minstrel'
>ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
>ath5k phy0: RF2112B 2GHz radio found (0x46)
>cfg80211: Calling CRDA for country: AM
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:04:00.0: setting latency timer to 64
>[drm] initializing kernel modesetting (RV380 0x1002:0x5B60).
>[drm] register mmio base: 0xF0000000
>[drm] register mmio size: 65536
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:04:00.0: VRAM: 256M 0xC0000000 - 0xCFFFFFFF (256M used)
>radeon 0000:04:00.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF
>radeon 0000:04:00.0: irq 45 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 1029656 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
>[drm] PCIE GART of 512M enabled (table at 0xC0040000).
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x00000000A0000000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Default TV standard: PAL
>[drm] 27.000000000 MHz TV ref clk
>[drm] DFP table revision: 4
>[drm] Default TV standard: PAL
>[drm] 27.000000000 MHz TV ref clk
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9321 PQ: 0 ANSI: 0
>scsi 4:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9321 PQ: 0 ANSI: 0
>scsi 4:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9321 PQ: 0 ANSI: 0
>scsi 4:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9321 PQ: 0 ANSI: 0
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>sd 4:0:0:1: [sdc] Attached SCSI removable disk
>sd 4:0:0:2: [sdd] Attached SCSI removable disk
>sd 4:0:0:3: [sde] Attached SCSI removable disk
>[drm] fb mappable at 0xC00C0000
>[drm] vram apper at 0xC0000000
>[drm] size 8294400
>[drm] fb depth is 24
>[drm]    pitch is 7680
>Console: switching to colour frame buffer device 240x67
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>[drm] Initialized radeon 2.5.0 20080528 for 0000:04:00.0 on minor 0
>EXT4-fs (sda2): re-mounted. Opts: (null)
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>Adding 1048572k swap on /swap.bin.  Priority:-1 extents:9 across:3080188k 
>r8169 0000:01:00.0: eth0: link down

Actions: View

Attachments on bug 28500: 36218 | 36219 | 36270 | 36316 | 36317 | 36318 | 36319

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.