Attachment 36830 Details for Bug 28422 – z03 dmesg

z03 dmesg

dmesg (text/plain), 58.82 KB, created by DEMAINE Benoit-Pierre on 2010-07-07 06:27:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: DEMAINE Benoit-Pierre

Created: 2010-07-07 06:27:17 UTC

Size: 58.82 KB

patch

obsolete

>Linux version 2.6.34-xen-Gentoo-uranus-1-31 (root@uranus) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 SMP Tue Jul 6 01:09:46 CEST 2010
>Command line: root=/dev/md5 ro odmraid   root_=UUID=3ae46540:5da32e75:3b8ef3b3:48c699fd   loop.max_part=63 max_part=63 panic=30 quiet_ noresume_
>Xen-provided machine memory map:
> BIOS: 0000000000000000 - 000000000009f800 (usable)
> BIOS: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS: 0000000000100000 - 00000000a7de0000 (usable)
> BIOS: 00000000a7de0000 - 00000000a7de3000 (ACPI NVS)
> BIOS: 00000000a7de3000 - 00000000a7df0000 (ACPI data)
> BIOS: 00000000a7df0000 - 00000000a7e00000 (reserved)
> BIOS: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS: 0000000100000000 - 0000000150000000 (usable)
>Xen-provided physical RAM map:
> Xen: 0000000000000000 - 00000000ec6b3000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>last_pfn = 0xec6b3 max_arch_pfn = 0x80000000
>initial memory mapped : 0 - 00000000
>found SMP MP-table at [ffffffffff5f18d0] 000f58d0
>init_memory_mapping: 0000000000000000-00000000ec6b3000
> 0000000000 - 00ec6b3000 page 4k
>kernel direct mapping tables up to ec6b3000 @ ecc000-1635000
>ACPI: RSDP 00000000000f7270 00014 (v00 GBT   )
>ACPI: RSDT 00000000a7de3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000a7de3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000a7de30c0 07299 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000a7de0000 00040
>ACPI: HPET 00000000a7dea440 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000a7dea480 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: TAMG 00000000a7dea4c0 0030A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>ACPI: APIC 00000000a7dea380 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x000ebeb3
>    0: 0x000ec6b3 -> 0x000ec6b3
>On node 0 totalpages: 966323
>free_area_init_node: node 0, pgdat ffffffff80d333c0, node_mem_map ffff880001d98000
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  DMA32 zone: 13184 pages used for memmap
>  DMA32 zone: 949043 pages, LIFO batch:31
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>early_res array is doubled to 64 at [0 - 7ff]
>Allocating PCI resources starting at a7e00000 (gap: a7e00000:38200000)
>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 17 pages/cpu @ffff880001007000 s40808 r8192 d20632 u69632
>pcpu-alloc: s40808 r8192 d20632 u69632 alloc=17*4096
>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
>Swapping MFNs for PFN d4d and 100e (MFN 14bd4d and 14c00c)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 953083
>Kernel command line: root=/dev/md5 ro odmraid   root_=UUID=3ae46540:5da32e75:3b8ef3b3:48c699fd   loop.max_part=63 max_part=63 panic=30 quiet_ noresume_
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Address size: 27 bits
> Kernel range: ffff8800058d4000 - ffff8800098d4000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Subtract (51 early reservations)
>  #1 [0000ec0000 - 0000ecc000]    Xen provided
>  #2 [0000100000 - 0000e9f5f4]   TEXT DATA BSS
>  #3 [0000ea0000 - 0000ea00fe]             BRK
>  #4 [0000ecc000 - 0001000000]         PGTABLE
>  #5 [0001763000 - 0001d98000]         PGTABLE
>  #6 [00ebeb3000 - 00ec6b3000]         BALLOON
>  #7 [0001d98000 - 0005154000]         BOOTMEM
>  #8 [0005154000 - 0005154008]         BOOTMEM
>  #9 [0005154040 - 00051541c0]         BOOTMEM
>  #10 [00051541c0 - 0005154328]         BOOTMEM
>  #11 [0005154340 - 000516c340]         BOOTMEM
>  #12 [000516d000 - 000516e000]         BOOTMEM
>  #13 [000516e000 - 000516f000]         BOOTMEM
>  #14 [000516f000 - 0005170000]         BOOTMEM
>  #15 [000516c340 - 000516c420]         BOOTMEM
>  #16 [0005170000 - 00058d3598]         BOOTMEM
>  #17 [0001000000 - 0001000028]         BOOTMEM
>  #18 [0001000040 - 0001000060]         BOOTMEM
>  #19 [0001001000 - 0001002000]         BOOTMEM
>  #20 [0001002000 - 0001003000]         BOOTMEM
>  #21 [0001003000 - 0001004000]         BOOTMEM
>  #22 [0001004000 - 0001005000]         BOOTMEM
>  #23 [0001000080 - 00010002b0]         BOOTMEM
>  #24 [00010002c0 - 0001000328]         BOOTMEM
>  #25 [0001000340 - 00010003a8]         BOOTMEM
>  #26 [00010003c0 - 0001000428]         BOOTMEM
>  #27 [0001000440 - 00010004a8]         BOOTMEM
>  #28 [00010004c0 - 0001000528]         BOOTMEM
>  #29 [0001000540 - 00010005a8]         BOOTMEM
>  #30 [00010005c0 - 0001000628]         BOOTMEM
>  #31 [0001000640 - 00010006a8]         BOOTMEM
>  #32 [00010006c0 - 0001000728]         BOOTMEM
>  #33 [0001000740 - 00010007a8]         BOOTMEM
>  #34 [00010007c0 - 0001000843]         BOOTMEM
>  #35 [0001000880 - 0001000903]         BOOTMEM
>  #36 [0001007000 - 000104b000]         BOOTMEM
>  #37 [0001000940 - 0001000948]         BOOTMEM
>  #38 [0001000980 - 0001000988]         BOOTMEM
>  #39 [00010009c0 - 00010009d0]         BOOTMEM
>  #40 [0001000a00 - 0001000a20]         BOOTMEM
>  #41 [0001000a40 - 0001000b40]         BOOTMEM
>  #42 [0001000b40 - 0001000b88]         BOOTMEM
>  #43 [0001000bc0 - 0001000c08]         BOOTMEM
>  #44 [000104b000 - 0001053000]         BOOTMEM
>  #45 [0001053000 - 0001453000]         BOOTMEM
>  #46 [0001453000 - 0001653000]         BOOTMEM
>  #47 [00058d4000 - 00098d4000]         BOOTMEM
>  #48 [0001653000 - 0001673000]         BOOTMEM
>  #49 [0001673000 - 00016b3000]         BOOTMEM
>  #50 [00016b3000 - 00016bb000]         BOOTMEM
>Memory: 3710624k/3873484k available (8247k kernel code, 8192k absent, 154668k reserved, 4315k data, 472k init)
>Hierarchical RCU implementation.
>NR_IRQS:704
>Xen reported: 3415.526 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>console [xvc-1] enabled
>Calibrating delay using timer specific routine.. 6840.88 BogoMIPS (lpj=3420444)
>Mount-cache hash table entries: 256
>mce: CPU supports 6 MCE banks
>SMP alternatives: switching to UP code
>ACPI: Core revision 20100121
>SMP alternatives: switching to SMP code
>Brought up 4 CPUs
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10284.000 MB/sec
>xor: using function: generic_sse (10284.000 MB/sec)
>regulator: core version 0.5
>NET: Registered protocol family 16
>node 0 link 0: io port [a000, ffff]
>TOM: 00000000b0000000 aka 2816M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [b0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
>TOM2: 0000000150000000 aka 5376M
>bus: [00, 05] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xb0000000-0xdfffffff]
>bus: 00 index 3 [mem 0xe0600000-0xffffffff]
>bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
>bus: 00 index 5 [mem 0x150000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xaff00000-0xfebfffff]
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
>pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
>pci 0000:01:05.0: reg 14: [io  0xce00-0xceff]
>pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff]
>pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff]
>pci 0000:01:05.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfdefffff]
>pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
>pci 0000:02:00.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit]
>pci 0000:02:00.0: reg 20: [io  0xbe00-0xbeff]
>pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.1: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
>pci 0000:02:00.1: supports D1 D2
>pci 0000:00:02.0: PCI bridge to [bus 02-02]
>pci 0000:00:02.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:02.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
>pci 0000:03:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:03:00.0: reg 18: [mem 0xfdbe0000-0xfdbeffff 64bit]
>pci 0000:03:00.0: reg 20: [io  0xee00-0xeeff]
>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.1: reg 10: [mem 0xfdbfc000-0xfdbfffff 64bit]
>pci 0000:03:00.1: supports D1 D2
>pci 0000:00:04.0: PCI bridge to [bus 03-03]
>pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:04:00.0: reg 10: [io  0xde00-0xdeff]
>pci 0000:04:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
>pci 0000:04:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:0a.0: PCI bridge to [bus 04-04]
>pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:05:0e.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
>pci 0000:05:0e.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
>pci 0000:05:0e.0: supports D1 D2
>pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:0e.0: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
>pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xaff00000-0xfebfffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=none,locks=none
>vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
>vgaarb: loaded
>xen_mem: Initialising balloon driver.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>raid6: int64x1   3214 MB/s
>raid6: int64x2   3574 MB/s
>raid6: int64x4   2917 MB/s
>raid6: int64x8   2503 MB/s
>raid6: sse2x1    4257 MB/s
>raid6: sse2x2    6914 MB/s
>raid6: sse2x4    7226 MB/s
>raid6: using algorithm sse2x4 (7226 MB/s)
>Advanced Linux Sound Architecture Driver Version 1.0.22.1.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 00000000a7de0000 - 00000000a7ffffff 
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>cfg80211: Calling CRDA to update world regulatory domain
>Switching to clocksource xen
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>pnp 00:0c: disabling [mem 0x000d2c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x00100000-0xa7ddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:02: [io  0x4100-0x411f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x4000-0x40fe] has been reserved
>system 00:02: [io  0x4210-0x4217] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0c: [mem 0xa7de0000-0xa7dfffff] could not be reserved
>system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0c: [mem 0xa7ef0000-0xafeeffff] could not be reserved
>system 00:0c: [mem 0xfec00000-0xfec00fff] has been reserved
>system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
>system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfdefffff]
>pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 02-02]
>pci 0000:00:02.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:02.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
>pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
>pci 0000:00:04.0: PCI bridge to [bus 03-03]
>pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:04:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
>pci 0000:00:0a.0: PCI bridge to [bus 04-04]
>pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 05-05]
>pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
>pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:0a.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xaff00000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff]
>pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:02: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
>pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfd8fffff]
>pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
>pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref]
>pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:05: resource 8 [mem 0xaff00000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:02:00.0: Boot video device
>PCI: CLS 4 bytes, default 64
>MCE: bind virq for DOM0 logging
>MCE_DOM0_LOG: enter dom0 mce vIRQ handler
>MCE_DOM0_LOG: No more urgent data
>MCE_DOM0_LOG: No more nonurgent data
>audit: initializing netlink socket (disabled)
>type=2000 audit(1278501591.722:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>ROMFS MTD (C) 2007 Red Hat, Inc.
>fuse init (API version 7.13)
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 7549
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>lp: driver loaded but no devices found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>uvesafb: failed to execute /sbin/v86d
>uvesafb: make sure that the v86d helper is installed and executable
>uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
>uvesafb: vbe_init() failed with -22
>uvesafb: probe of uvesafb.0 failed with error -22
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>Floppy drive(s): fd0 is 1.44M
>floppy0: Unable to grab DMA2 for the floppy driver
>FDC 0 is a post-1991 82077
>brd: module loaded
>loop: module loaded
>nbd: registered device at major 43
>Xen virtual console successfully installed as xvc0
>Event-channel device installed.
>blktap_device_init: blktap device major 252
>blktap_ring_init: blktap ring major: 251
>netfront: Initialising virtual ethernet driver.
>usbcore: registered new interface driver usbback
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>ide-cd driver 5.00
>SCSI Media Changer driver v0.25 
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi6 : pata_atiixp
>scsi7 : pata_atiixp
>ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>parport0: AVR Butterfly
>parport0: cannot grant exclusive access for device spi-lm70llp
>spi-lm70llp: spi_lm70llp probe fail, status -12
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
>Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
>Copyright (c) 2007-2009 Intel Corporation.
>Intel(R) Virtual Function Network Driver - version 1.0.0-k0
>Copyright (c) 2009 Intel Corporation.
>bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
>bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
>Atheros(R) L2 Ethernet Driver - version 2.2.3
>Copyright (c) 2007 Atheros Corporation.
>jme: JMicron JMC2XX ethernet driver version 1.0.6
>NET3 PLIP version 2.4-parport gniibe@mri.co.jp
>plip0: Parallel port at 0x378, using IRQ 7.
>pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ThunderLAN driver v1.15a
>TLAN: 0 devices installed, PCI: 0  EISA: 0
>ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
>cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.1 (Feb 22, 2010)
>sky2: driver version 1.27
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>PPP MPPE Compression module registered
>NET: Registered protocol family 24
>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
>CSLIP: code copyright 1989 Regents of the University of California.
>SLIP linefill/keepalive option.
>Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:04:00.0: setting latency timer to 64
>r8169 0000:04:00.0: irq 383 (255) for MSI/MSI-X
>r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90010736000, 6c:f0:49:02:21:9b, XID 1c4000c0 IRQ 383
>usbcore: registered new interface driver asix
>usbcore: registered new interface driver cdc_ether
>usbcore: registered new interface driver net1080
>usbcore: registered new interface driver cdc_subset
>usbcore: registered new interface driver zaurus
>usbcore: registered new interface driver cdc_phonet
>usbcore: registered new interface driver rt73usb
>firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ata7.01: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.05, max UDMA/33
>ata7.01: configured for UDMA/33
>firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>ieee1394: raw1394: /dev/raw1394 device initialized
>aoe: AoE v47 initialised.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: ST31000340AS, SD15, max UDMA/133
>ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver cdc_acm
>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver ums-alauda
>usbcore: registered new interface driver ums-datafab
>usbcore: registered new interface driver ums-freecom
>usbcore: registered new interface driver ums-isd200
>usbcore: registered new interface driver ums-jumpshot
>usbcore: registered new interface driver ums-karma
>usbcore: registered new interface driver ums-sddr09
>usbcore: registered new interface driver ums-sddr55
>usbcore: registered new interface driver ums-usbat
>ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>usbcore: registered new interface driver usbserial
>ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>USB Serial support registered for generic
>ata2.00: configured for UDMA/133
>ata1.00: configured for UDMA/133
>ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
>ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc:
>scsi 3:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd:
>scsi 6:0:1:0: CD-ROM            HL-DT-ST RW/DVD GCC-4521B 1.05 PQ: 0 ANSI: 5
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:1:0: Attached scsi CD-ROM sr0
>sr 6:0:1:0: Attached scsi generic sg4 type 5
> sda1 sda2 sda3 sda4 < sdd1 sdd2 sdd3 sdd4 < sda5 sdb1 sdb2 sdb3 sdb4 < sdc1 sdc2 sdc3 sdc4 < sda6 sda7 sdd5 sdb5 sdd6 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
> sdc5 sdb6 sdd7 sdc6 sdb7 sdd8 >
>sd 3:0:0:0: [sdd] Attached SCSI disk
> sdc7 sdc8 >
> sdb8 >
>sd 2:0:0:0: [sdc] Attached SCSI disk
>sd 1:0:0:0: [sdb] Attached SCSI disk
>firewire_core: created device fw0: GUID 00e5d98e0000241d, S400
>usb 3-2: new low speed USB device using ohci_hcd and address 2
>usb 3-3: new full speed USB device using ohci_hcd and address 3
>usb 5-1: new full speed USB device using ohci_hcd and address 2
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 3
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 4
>usb 5-1: device not accepting address 4, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 5
>usb 5-1: device not accepting address 5, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
>usbcore: registered new interface driver belkin
>belkin_sa: v1.2:USB Belkin Serial converter driver
>USB Serial support registered for hp4X
>usbcore: registered new interface driver hp4X
>hp4x: v1.00:HP4x (48/49) Generic Serial driver
>USB Serial support registered for IR Dongle
>usbcore: registered new interface driver ir-usb
>ir_usb: v0.4:USB IR Dongle driver
>USB Serial support registered for MCT U232
>usbcore: registered new interface driver mct_u232
>mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
>USB Serial support registered for navman
>usbcore: registered new interface driver navman
>USB Serial support registered for GSM modem (1-port)
>usbcore: registered new interface driver option
>option: v0.7.2:USB Driver for GSM modems
>USB Serial support registered for pl2303
>usbcore: registered new interface driver pl2303
>pl2303: Prolific PL2303 USB to serial adaptor driver
>USB Serial support registered for TI USB 3410 1 port adapter
>USB Serial support registered for TI USB 5052 2 port adapter
>usbcore: registered new interface driver ti_usb_3410_5052
>ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver
>USB Serial support registered for Keyspan PDA
>USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
>usbcore: registered new interface driver keyspan_pda
>keyspan_pda: v1.1:USB Keyspan PDA Converter driver
>usbcore: registered new interface driver usblcd
>usbcore: registered new interface driver usbled
>usbcore: registered new interface driver legousbtower
>legousbtower: v0.96:LEGO USB Tower Driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>I2O subsystem v1.325
>i2o: max drivers = 8
>I2O Configuration OSM v1.323
>I2O Bus Adapter OSM v1.317
>I2O Block Device OSM v1.325
>I2O SCSI Peripheral OSM v1.316
>I2O ProcFS OSM v1.316
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram
>rtc-test rtc-test.0: rtc core: registered test as rtc1
>rtc-test rtc-test.1: rtc core: registered test as rtc2
>i2c /dev entries driver
>ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io  0x0b00-0x0b0f 64bit pref window]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>i2c-parport: adapter type unspecified
>i2c-parport-light: adapter type unspecified
>usbcore: registered new interface driver i2c-tiny-usb
>Driver for 1-wire Dallas network protocol.
>hdaps: supported laptop not found!
>hdaps: driver init failed (ret=-19)!
>it87: Found IT8718F chip at 0x228, revision 8
>it87: in3 is VCC (+5V)
>it87: Beeping is supported
>md: linear personality registered for level -1
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>md: raid10 personality registered for level 10
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: multipath personality registered for level -4
>md: faulty personality registered for level -5
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>Bluetooth: Virtual HCI driver ver 1.3
>EDAC MC: Ver: 2.1.0 Jun 25 2010
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>HIFN supports only 32-bit addresses.
>usbip_common_mod: usbip common driver1.0
>vhci_hcd: vhci_hcd, 1.0
>usbip: proving...
>vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
>vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 8
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 8 ports detected
>usbip 1-1:1.0: this device 1-1 is not in match_busid table. skip!
>usbip 3-2:1.0: this device 3-2 is not in match_busid table. skip!
>usbip 3-2:1.1: this device 3-2 is not in match_busid table. skip!
>usbip 3-3:1.0: this device 3-3 is not in match_busid table. skip!
>usbip 3-3:1.1: this device 3-3 is not in match_busid table. skip!
>usbcore: registered new interface driver usbip
>usbip:Stub Driver for USB/IP:1.0
>no UART detected at 0x1
>snd_portman2x4: probe of snd_portman2x4.0 failed with error -5
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>hda_codec: ALC889A: BIOS auto-probing.
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3
>HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.1: setting latency timer to 64
>HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:02:00.1: irq 382 (254) for MSI/MSI-X
>HDA Intel 0000:02:00.1: setting latency timer to 64
>HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:03:00.1: irq 381 (253) for MSI/MSI-X
>HDA Intel 0000:03:00.1: setting latency timer to 64
>usbcore: registered new interface driver snd-usb-audio
>usbcore: registered new interface driver snd-usb-usx2y
>usbcore: registered new interface driver snd-usb-us122l
>usbcore: registered new interface driver snd-usb-caiaq
>No device for DAI AD73311
>Asahi Kasei AK4104 ALSA SoC Codec Driver
>No device for DAI AK4535
>Cirrus Logic CS4270 ALSA SoC Codec Driver
>No device for DAI PCM3008 HiFi
>No device for DAI SSM2602
>No device for DAI tlv320aic23
>No device for DAI UDA134X
>No device for DAI WM8510 HiFi
>No device for DAI WM8728
>No device for DAI WM8750
>No device for DAI WM8971
>No device for DAI WM8990 ADC/DAC Primary
>ALSA device list:
>  #0: HDA ATI SB at 0xfe024000 irq 16
>  #1: HDA ATI HDMI at 0xfdefc000 irq 19
>  #2: HDA ATI HDMI at 0xfdcfc000 irq 382
>  #3: HDA ATI HDMI at 0xfdbfc000 irq 381
>xenoprofile_init: ret 0, events 4, xenoprof_is_primary 1
>pktgen 2.72: Packet Generator for packet performance testing.
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>IPVS: Registered protocols ()
>IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
>IPVS: ipvs loaded.
>IPv4 over IPv4 tunneling driver
>GRE over IPv4 tunneling driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>arp_tables: (C) 2002 David S. Miller
>TCP bic registered
>TCP cubic registered
>TCP westwood registered
>TCP highspeed registered
>TCP htcp registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Bridge firewalling registered
>Ebtables v2.0 registered
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>lec:lane_module_init: lec.c: Jul  5 2010 22:57:20 initialized
>mpoa:atm_mpoa_init: mpc.c: Jul  5 2010 22:57:17 initialized
>NET: Registered protocol family 35
>PCI IO multiplexer device installed.
>rtc_cmos 00:05: setting system clock to 2010-07-07 11:19:55 UTC (1278501595)
>md: Waiting for all devices to be available before autodetect
>md: If you don't use raid, use raid=noautodetect
>md: Autodetecting RAID arrays.
>md: Scanned 20 and added 20 devices.
>md: autorun ...
>md: considering sdb8 ...
>md:  adding sdb8 ...
>md: sdb7 has different UUID to sdb8
>md: sdb6 has different UUID to sdb8
>md: sdb5 has different UUID to sdb8
>md: sdb3 has different UUID to sdb8
>md:  adding sdc8 ...
>md: sdc7 has different UUID to sdb8
>md: sdc6 has different UUID to sdb8
>md: sdc5 has different UUID to sdb8
>md: sdc3 has different UUID to sdb8
>md:  adding sdd8 ...
>md: sdd7 has different UUID to sdb8
>md: sdd6 has different UUID to sdb8
>md: sdd5 has different UUID to sdb8
>md: sdd3 has different UUID to sdb8
>md:  adding sda8 ...
>md: sda7 has different UUID to sdb8
>md: sda6 has different UUID to sdb8
>md: sda5 has different UUID to sdb8
>md: sda3 has different UUID to sdb8
>md: created md8
>md: bind<sda8>
>md: bind<sdd8>
>md: bind<sdc8>
>md: bind<sdb8>
>md: running: <sdb8><sdc8><sdd8><sda8>
>raid5: device sdb8 operational as raid disk 1
>raid5: device sdc8 operational as raid disk 2
>raid5: device sdd8 operational as raid disk 3
>raid5: device sda8 operational as raid disk 0
>raid5: allocated 4272kB for md8
>1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>raid5: raid level 5 set md8 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda8
> disk 1, o:1, dev:sdb8
> disk 2, o:1, dev:sdc8
> disk 3, o:1, dev:sdd8
>md8: detected capacity change from 0 to 2661437079552
>md: considering sdb7 ...
>md:  adding sdb7 ...
>md: sdb6 has different UUID to sdb7
>md: sdb5 has different UUID to sdb7
>md: sdb3 has different UUID to sdb7
>md:  adding sdc7 ...
>md: sdc6 has different UUID to sdb7
>md: sdc5 has different UUID to sdb7
>md: sdc3 has different UUID to sdb7
>md:  adding sdd7 ...
>md: sdd6 has different UUID to sdb7
>md: sdd5 has different UUID to sdb7
>md: sdd3 has different UUID to sdb7
>md:  adding sda7 ...
>md: sda6 has different UUID to sdb7
>md: sda5 has different UUID to sdb7
>md: sda3 has different UUID to sdb7
>md: created md7
>md: bind<sda7>
>md: bind<sdd7>
>md: bind<sdc7>
>md: bind<sdb7>
>md: running: <sdb7><sdc7><sdd7><sda7>
>raid5: device sdb7 operational as raid disk 1
>raid5: device sdc7 operational as raid disk 2
>raid5: device sdd7 operational as raid disk 3
>raid5: device sda7 operational as raid disk 0
>raid5: allocated 4272kB for md7
>1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>raid5: raid level 5 set md7 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda7
> disk 1, o:1, dev:sdb7
> disk 2, o:1, dev:sdc7
> disk 3, o:1, dev:sdd7
>md7: detected capacity change from 0 to 150028812288
>md: considering sdb6 ...
>md:  adding sdb6 ...
>md: sdb5 has different UUID to sdb6
>md: sdb3 has different UUID to sdb6
>md:  adding sdc6 ...
>md: sdc5 has different UUID to sdb6
>md: sdc3 has different UUID to sdb6
>md:  adding sdd6 ...
>md: sdd5 has different UUID to sdb6
>md: sdd3 has different UUID to sdb6
>md:  adding sda6 ...
>md: sda5 has different UUID to sdb6
>md: sda3 has different UUID to sdb6
>md: created md6
>md: bind<sda6>
>md: bind<sdd6>
>md: bind<sdc6>
>md: bind<sdb6>
>md: running: <sdb6><sdc6><sdd6><sda6>
>raid5: device sdb6 operational as raid disk 1
>raid5: device sdc6 operational as raid disk 2
>raid5: device sdd6 operational as raid disk 3
>raid5: device sda6 operational as raid disk 0
>raid5: allocated 4272kB for md6
>1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>raid5: raid level 5 set md6 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda6
> disk 1, o:1, dev:sdb6
> disk 2, o:1, dev:sdc6
> disk 3, o:1, dev:sdd6
>md6: detected capacity change from 0 to 90017169408
>md: considering sdb5 ...
>md:  adding sdb5 ...
>md: sdb3 has different UUID to sdb5
>md:  adding sdc5 ...
>md: sdc3 has different UUID to sdb5
>md:  adding sdd5 ...
>md: sdd3 has different UUID to sdb5
>md:  adding sda5 ...
>md: sda3 has different UUID to sdb5
>md: created md5
>md: bind<sda5>
>md: bind<sdd5>
>md: bind<sdc5>
>md: bind<sdb5>
>md: running: <sdb5><sdc5><sdd5><sda5>
>raid5: device sdb5 operational as raid disk 1
>raid5: device sdc5 operational as raid disk 2
>raid5: device sdd5 operational as raid disk 3
>raid5: device sda5 operational as raid disk 0
>raid5: allocated 4272kB for md5
>1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
>raid5: raid level 5 set md5 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda5
> disk 1, o:1, dev:sdb5
> disk 2, o:1, dev:sdc5
> disk 3, o:1, dev:sdd5
>md5: detected capacity change from 0 to 30030102528
>md: considering sdb3 ...
>md:  adding sdb3 ...
>md:  adding sdc3 ...
>md:  adding sdd3 ...
>md:  adding sda3 ...
>md: created md3
>md: bind<sda3>
>md: bind<sdd3>
>md: bind<sdc3>
>md: bind<sdb3>
>md: running: <sdb3><sdc3><sdd3><sda3>
>raid0: looking at sdb3
>raid0:   comparing sdb3(3919616)
> with sdb3(3919616)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdc3
>raid0:   comparing sdc3(3919616)
> with sdb3(3919616)
>raid0:   EQUAL
>raid0: looking at sdd3
>raid0:   comparing sdd3(3919616)
> with sdb3(3919616)
>raid0:   EQUAL
>raid0: looking at sda3
>raid0:   comparing sda3(3919616)
> with sdb3(3919616)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 15678464 sectors.
>******* md3 configuration *********
>zone0=[sda3/sdb3/sdc3/sdd3/]
>        zone offset=0kb device offset=0kb size=7839232kb
>**********************************
>
>md3: detected capacity change from 0 to 8027373568
>md: ... autorun DONE.
> md5: unknown partition table
>EXT3-fs (md5): error: couldn't mount because of unsupported optional features (240)
>EXT2-fs (md5): error: couldn't mount because of unsupported optional features (240)
>EXT4-fs (md5): mounted filesystem with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 9:5.
>Freeing unused kernel memory: 472k freed
>udev: starting version 149
>[drm] Initialized drm 1.1.0 20060810
>input: Microsoft MicrosoftÂ® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4
>generic-usb 0003:045E:0730.0001: input: USB HID v1.11 Keyboard [Microsoft MicrosoftÂ® Digital Media Keyboard 3000] on usb-0000:00:12.0-2/input0
>input: Microsoft MicrosoftÂ® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input5
>generic-usb 0003:045E:0730.0002: input: USB HID v1.11 Device [Microsoft MicrosoftÂ® Digital Media Keyboard 3000] on usb-0000:00:12.0-2/input1
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input6
>generic-usb 0003:046D:C525.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input7
>generic-usb 0003:046D:C525.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
> md6:
> md7:
> md8:
> md3: unknown partition table
> unknown partition table
> unknown partition table
> unknown partition table
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:05.0: enabling device (0006 -> 0007)
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:05.0: setting latency timer to 64
>[drm] initializing kernel modesetting (RS880 0x1002:0x9710).
>[drm] register mmio base: 0xFDEE0000
>[drm] register mmio size: 65536
>ATOM BIOS: B43106_DVI
>[drm] Clocks initialized !
>[drm] 1 Power State(s)
>[drm] State 0 Default (default)
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine: 500000
>[drm] radeon: power management initialized
>radeon 0000:01:05.0: VRAM: 128M 0xC0000000 - 0xC7FFFFFF (128M used)
>radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 32bits DDR
>[TTM] Zone  kernel: Available graphics memory: 1920978 kiB.
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RS780 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
>platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Unknown TV standard; defaulting to NTSC
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   DVI-D
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_LVTMA
>[drm] fb mappable at 0xD8141000
>[drm] vram apper at 0xD8000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>Console: switching to colour frame buffer device 160x64
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.3.0 20080528 for 0000:01:05.0 on minor 0
>radeon 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:02:00.0: setting latency timer to 64
>[drm] initializing kernel modesetting (RV710 0x1002:0x954F).
>[drm] register mmio base: 0xFDCE0000
>[drm] register mmio size: 65536
>ATOM BIOS: 113
>[drm] Clocks initialized !
>[drm] Internal thermal controller with fan control
>[drm] 4 Power State(s)
>[drm] State 0 Default (default)
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 600000/400000
>[drm] 		1 engine/memory: 600000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] State 1 Performance 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 110000/250000
>[drm] 		1 engine/memory: 300000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] State 2 Default 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 600000/400000
>[drm] 		1 engine/memory: 600000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] State 3 Performance 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 110000/400000
>[drm] 		1 engine/memory: 300000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] radeon: power management initialized
>radeon 0000:02:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
>radeon 0000:02:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 64bits DDR
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:02:00.0: irq 380 (252) for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV710 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin
>platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Default TV standard: PAL
>[drm] Default TV standard: PAL
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   HDMI-A
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD4
>[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] fb mappable at 0xB0141000
>[drm] vram apper at 0xB0000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fb1: radeondrmfb frame buffer device
>[drm] Initialized radeon 2.3.0 20080528 for 0000:02:00.0 on minor 1
>radeon 0000:03:00.0: enabling device (0000 -> 0003)
>radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:03:00.0: setting latency timer to 64
>[drm] initializing kernel modesetting (RV710 0x1002:0x954F).
>[drm] register mmio base: 0xFDBE0000
>[drm] register mmio size: 65536
>ATOM BIOS: 113
>[drm] GPU not posted. posting now...
>[drm] Clocks initialized !
>[drm] Internal thermal controller with fan control
>[drm] 4 Power State(s)
>[drm] State 0 Default (default)
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 600000/400000
>[drm] 		1 engine/memory: 600000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] State 1 Performance 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 110000/250000
>[drm] 		1 engine/memory: 300000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] State 2 Default 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 600000/400000
>[drm] 		1 engine/memory: 600000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] State 3 Performance 
>[drm] 	16 PCIE Lanes
>[drm] 	3 Clock Mode(s)
>[drm] 		0 engine/memory: 110000/400000
>[drm] 		1 engine/memory: 300000/400000
>[drm] 		2 engine/memory: 600000/400000
>[drm] radeon: power management initialized
>radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
>radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 64bits DDR
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:03:00.0: irq 379 (251) for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV710 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin
>platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Unknown TV standard; defaulting to NTSC
>[drm] Unknown TV standard; defaulting to NTSC
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   HDMI-A
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD4
>[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] fb mappable at 0xC0141000
>[drm] vram apper at 0xC0000000
>[drm] size 3145728
>[drm] fb depth is 24
>[drm]    pitch is 4096
>fb2: radeondrmfb frame buffer device
>[drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 2
> loop0:
>EXT4-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
>EXT4-fs (loop0): mounted filesystem with ordered data mode
>EXT4-fs (md6): mounted filesystem with ordered data mode
>EXT4-fs (md8): mounted filesystem with ordered data mode
>r8169 0000:04:00.0: eth0: link up
>r8169 0000:04:00.0: eth0: link up
>Adding 7839228k swap on /dev/md3.  Priority:-1 extents:1 across:7839228k 
>r8169 0000:04:00.0: peth0: link up
>device peth0 entered promiscuous mode
>suspend: event channel 44
>eth0: port 1(peth0) entering forwarding state
>peth0: no IPv6 routers present
>vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
>vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
>vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:01:05.0
>vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
>hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
>hda-intel: IRQ timing workaround is activated for card #3. Suggest a bigger bdl_pos_adj.

Actions: View

Attachments on bug 28422: 36099 | 36100 | 36101 | 36102 | 36103 | 36109 | 36110 | 36111 | 36112 | 36119 | 36120 | 36121 | 36122 | 36123 | 36124 | 36441 | 36442 | 36443 | 36444 | 36445 | 36446 | 36447 | 36829 | 36830 | 36831 | 36832 | 36833 | 36834 | 36835 | 36836 | 36837 | 36838

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.