Attachment 36937 Details for Bug 29003 – lspci -vv

lspci -vv

lspci.txt (text/plain), 11.48 KB, created by boris64 on 2010-07-10 12:44:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: boris64

Created: 2010-07-10 12:44:28 UTC

Size: 11.48 KB

patch

obsolete

>00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
>	Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>	Capabilities: [80] AGP version 3.5
>		Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8,x16
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: agpgart-via
>	Kernel modules: via-agp
>
>00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: df000000-dfffffff
>	Prefetchable memory behind bridge: e0000000-f7ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: shpchp
>
>00:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
>	Subsystem: Creative Labs SB Audigy 2 ZS (SB0350)
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (500ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at b800 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: EMU10K1_Audigy
>	Kernel modules: snd-emu10k1
>
>00:0a.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
>	Subsystem: Creative Labs SB Audigy Game Port
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Region 0: I/O ports at b400 [size=8]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: Emu10k1_gameport
>	Kernel modules: emu10k1-gp
>
>00:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) (prog-if 10 [OHCI])
>	Subsystem: Creative Labs SB Audigy FireWire Port
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at de800000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>00:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
>	Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at dd800000 (32-bit, non-prefetchable) [size=64K]
>	Region 1: I/O ports at b000 [size=32]
>	Kernel driver in use: b2c2_flexcop_pci
>	Kernel modules: b2c2-flexcop-pci
>
>00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 4: I/O ports at a800 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at a400 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 21
>	Region 4: I/O ports at a000 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard rev 1.01
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin D routed to IRQ 21
>	Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: i2c-viapro, via-ircc
>
>00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard rev. 1.01
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 255
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>	Region 4: I/O ports at 9800 [size=16]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pata_via
>	Kernel modules: pata_via, via82cxxx
>
>00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
>	Subsystem: ASUSTeK Computer Inc. A7V8X-X Motherboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 23
>	Region 0: I/O ports at 9400 [size=256]
>	Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: via-rhine
>	Kernel modules: via-rhine
>
>01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA controller])
>	Subsystem: PC Partner Limited Device 0130
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at d800 [size=256]
>	Region 2: Memory at df800000 (32-bit, non-prefetchable) [size=64K]
>	Expansion ROM at effe0000 [disabled] [size=128K]
>	Capabilities: [58] AGP version 3.0
>		Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: radeon
>	Kernel modules: radeon, radeonfb
>
>01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
>	Subsystem: PC Partner Limited Device 0131
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (2000ns min), Cache Line Size: 32 bytes
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 29003: 36936 | 36937 | 36938

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.