Attachment 36970 Details for Bug 29026 – system log

system log

dmesg.txt (text/plain), 46.36 KB, created by Daniel Klaffenbach on 2010-07-12 13:05:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Klaffenbach

Created: 2010-07-12 13:05:52 UTC

Size: 46.36 KB

patch

obsolete

>Linux version 2.6.35-rc4+ (root@dk) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #35 SMP Fri Jul 9 23:17:01 CEST 2010
>Command line: root=/dev/sdc2 quiet radeon.dynclks=1 i8042.noaux=1 vdso32=0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
> BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
> BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
> BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x220000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CEFFF write-protect
>  CF000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 0E0000000 mask FE0000000 uncachable
>  2 base 100000000 mask F00000000 write-back
>  3 base 200000000 mask FE0000000 write-back
>  4 base 0DFF00000 mask FFFF00000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000dfeb0000
> 0000000000 - 00dfe00000 page 2M
> 00dfe00000 - 00dfeb0000 page 4k
>kernel direct mapping tables up to dfeb0000 @ 8000-e000
>init_memory_mapping: 0000000100000000-0000000220000000
> 0100000000 - 0220000000 page 2M
>kernel direct mapping tables up to 220000000 @ c000-16000
>ACPI: RSDP 00000000000f7760 00014 (v00 GBT   )
>ACPI: RSDT 00000000dfee3040 0004C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000dfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000dfee3180 03C2E (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
>ACPI: FACS 00000000dfeb0000 00040
>ACPI: HPET 00000000dfee6f00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000dfee6f80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: TAMG 00000000dfee7040 068F2 (v01 GBT    GBT   B0 5455312E BG?? 00020101)
>ACPI: APIC 00000000dfee6e00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: SSDT 00000000dfeee260 0018A (v01  PmRef  Cpu0Cst 00003001 INTL 20040311)
>ACPI: SSDT 00000000dfeee3f0 0018A (v01  PmRef  Cpu1Cst 00003001 INTL 20040311)
>ACPI: SSDT 00000000dfeee580 0018A (v01  PmRef  Cpu2Cst 00003001 INTL 20040311)
>ACPI: SSDT 00000000dfeee710 0018A (v01  PmRef  Cpu3Cst 00003001 INTL 20040311)
>ACPI: SSDT 00000000dfeee8a0 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880002200000-ffff8800093fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00220000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000001 -> 0x0000009d
>    0: 0x00000100 -> 0x000dfeb0
>    0: 0x00100000 -> 0x00220000
>On node 0 totalpages: 2096716
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3940 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 898792 pages, LIFO batch:31
>  Normal zone: 16128 pages used for memmap
>  Normal zone: 1163520 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>early_res array is doubled to 64 at [7000 - 77ff]
>PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
>PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
>PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
>PM: Registered nosave memory: 00000000dff00000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at dff00000 (gap: dff00000:18100000)
>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s77312 r8192 d20992 u524288
>pcpu-alloc: s77312 r8192 d20992 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2066252
>Kernel command line: root=/dev/sdc2 quiet radeon.dynclks=1 i8042.noaux=1 vdso32=0
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Checking aperture...
>No AGP bridge found
>Subtract (53 early reservations)
>  #1 [0001000000 - 00018e0c44]   TEXT DATA BSS
>  #2 [000009dc00 - 0000100000]   BIOS reserved
>  #3 [00018e1000 - 00018e10fa]             BRK
>  #4 [0000001000 - 0000003000]      TRAMPOLINE
>  #5 [0000003000 - 0000007000]     ACPI WAKEUP
>  #6 [0000008000 - 000000c000]         PGTABLE
>  #7 [000000c000 - 0000011000]         PGTABLE
>  #8 [00018e1100 - 00018e2100]         BOOTMEM
>  #9 [0001ce2100 - 0001ce2500]         BOOTMEM
>  #10 [00020e3000 - 00020e4000]         BOOTMEM
>  #11 [00020e4000 - 00020e5000]         BOOTMEM
>  #12 [0002200000 - 0009400000]        MEMMAP 0
>  #13 [00018e0c80 - 00018e0e00]         BOOTMEM
>  #14 [00018e2100 - 00018fa100]         BOOTMEM
>  #15 [00018fa100 - 0001912100]         BOOTMEM
>  #16 [0001913000 - 0001914000]         BOOTMEM
>  #17 [00018e0e00 - 00018e0e41]         BOOTMEM
>  #18 [00018e0e80 - 00018e0ec3]         BOOTMEM
>  #19 [0001912100 - 0001912368]         BOOTMEM
>  #20 [00018e0f00 - 00018e0f68]         BOOTMEM
>  #21 [00018e0f80 - 00018e0fe8]         BOOTMEM
>  #22 [0001912380 - 00019123e8]         BOOTMEM
>  #23 [0001912400 - 0001912468]         BOOTMEM
>  #24 [0001912480 - 00019124e8]         BOOTMEM
>  #25 [0001912500 - 0001912568]         BOOTMEM
>  #26 [0001912580 - 00019125e8]         BOOTMEM
>  #27 [0001912600 - 0001912668]         BOOTMEM
>  #28 [0001912680 - 00019126e8]         BOOTMEM
>  #29 [0001912700 - 0001912768]         BOOTMEM
>  #30 [0001912780 - 00019127a0]         BOOTMEM
>  #31 [00019127c0 - 00019127e0]         BOOTMEM
>  #32 [0001912800 - 000191283d]         BOOTMEM
>  #33 [0001912840 - 000191287d]         BOOTMEM
>  #34 [0001a00000 - 0001a1a000]         BOOTMEM
>  #35 [0001a80000 - 0001a9a000]         BOOTMEM
>  #36 [0001b00000 - 0001b1a000]         BOOTMEM
>  #37 [0001b80000 - 0001b9a000]         BOOTMEM
>  #38 [0001912880 - 0001912888]         BOOTMEM
>  #39 [00019128c0 - 00019128c8]         BOOTMEM
>  #40 [0001912900 - 0001912910]         BOOTMEM
>  #41 [0001912940 - 0001912960]         BOOTMEM
>  #42 [0001912980 - 0001912ab0]         BOOTMEM
>  #43 [0001912ac0 - 0001912b10]         BOOTMEM
>  #44 [0001912b40 - 0001912b90]         BOOTMEM
>  #45 [0001914000 - 000191c000]         BOOTMEM
>  #46 [0009400000 - 0009c00000]         BOOTMEM
>  #47 [0001ce2500 - 00020e2500]         BOOTMEM
>  #48 [0001912bc0 - 0001912e00]         BOOTMEM
>  #49 [0009c00000 - 000dc00000]         BOOTMEM
>  #50 [000191c000 - 000193c000]         BOOTMEM
>  #51 [000193c000 - 000197c000]         BOOTMEM
>  #52 [0000011000 - 0000019000]         BOOTMEM
>Memory: 8182072k/8912896k available (5269k kernel code, 526032k absent, 204792k reserved, 2889k data, 412k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:384
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2999.437 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.82 BogoMIPS (lpj=9998123)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20100428
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q9650  @ 3.00GHz stepping 0a
>Booting Node   0, Processors  #1 #2 #3 Ok.
>Brought up 4 CPUs
>Total of 4 processors activated (24005.21 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI Warning: Incorrect checksum in table [TAMG] - 0x73, should be 0x72 (20100428/tbutils-314)
>ACPI: SSDT 00000000dfeed980 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
>ACPI: SSDT 00000000dfeede40 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff88021fc40300), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
>ACPI: SSDT 00000000dfeedfa0 00152 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00152 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff88021fc40380), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
>ACPI: SSDT 00000000dfeee100 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._PDC] (Node ffff88021fc40400), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
>pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20: [io  0xff00-0xff1f]
>pci 0000:00:1a.1: reg 20: [io  0xfe00-0xfe1f]
>pci 0000:00:1a.2: reg 20: [io  0xfd00-0xfd1f]
>pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
>pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xfc00-0xfc1f]
>pci 0000:00:1d.1: reg 20: [io  0xfb00-0xfb1f]
>pci 0000:00:1d.2: reg 20: [io  0xfa00-0xfa1f]
>pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
>pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
>pci 0000:00:1f.2: reg 10: [io  0xf900-0xf907]
>pci 0000:00:1f.2: reg 14: [io  0xf800-0xf803]
>pci 0000:00:1f.2: reg 18: [io  0xf700-0xf707]
>pci 0000:00:1f.2: reg 1c: [io  0xf600-0xf603]
>pci 0000:00:1f.2: reg 20: [io  0xf500-0xf51f]
>pci 0000:00:1f.2: reg 24: [mem 0xfdffd000-0xfdffd7ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
>pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xde00-0xdeff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:00.0: reg 10: [io  0xee00-0xeeff]
>pci 0000:03:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
>pci 0000:03:00.0: reg 20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.4: PCI bridge to [bus 03-03]
>pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:1c.4:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:04:06.0: reg 10: [mem 0xfddff000-0xfddff7ff]
>pci 0000:04:06.0: reg 14: [mem 0xfddf8000-0xfddfbfff]
>pci 0000:04:06.0: supports D1 D2
>pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:04:06.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
>reserve RAM buffer: 00000000dfeb0000 - 00000000dfffffff 
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0290-0x029f] has been reserved
>system 00:01: [io  0x0800-0x0805] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: [io  0x0880-0x088f] has been reserved
>system 00:07: [io  0x0400-0x04cf] could not be reserved
>system 00:07: [io  0x04d2-0x04ff] has been reserved
>system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:09: [mem 0x000d2a00-0x000d3fff] has been reserved
>system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:09: [mem 0xdfeb0000-0xdfefffff] could not be reserved
>system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:09: [mem 0x00100000-0xdfeaffff] could not be reserved
>system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
>system 00:09: [mem 0xfed20000-0xfed8ffff] could not be reserved
>system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
>system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:09: [mem 0x000e0000-0x000effff] has been reserved
>pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0000000-0xf01fffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
>pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
>pci 0000:00:1c.4: PCI bridge to [bus 03-03]
>pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:1c.4:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: enabling device (0000 -> 0003)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
>pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:04: resource 9 [mem 0xdff00000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 4 bytes, default 64
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880009c00000 - ffff88000dc00000
>software IO TLB at phys 0x9c00000 - 0xdc00000
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>fuse init (API version 7.14)
>msgmni has been set to 15980
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
>intel_idle: MWAIT substates: 0x22220
>intel_idle: does not run on family 6 model 23
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] initializing kernel modesetting (RV670 0x1002:0x9501).
>[drm] register mmio base: 0xFDEE0000
>[drm] register mmio size: 65536
>ATOM BIOS: 113
>[drm] Clocks initialized !
>radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
>radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[drm] Detected VRAM RAM=512M, BAR=256M
>[drm] RAM width 256bits DDR
>[TTM] Zone  kernel: Available graphics memory: 4091036 kiB.
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 512M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:01:00.0: irq 43 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV670 Microcode
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Default TV standard: NTSC
>[drm] Default TV standard: NTSC
>[drm] Default TV standard: NTSC
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   DIN
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_KLDSCP_DAC2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD2
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_LVTM1
>[drm] Possible lm63 thermal controller at 0x4c with fan control
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xE0141000
>[drm] vram apper at 0xE0000000
>[drm] size 7258112
>[drm] fb depth is 24
>[drm]    pitch is 6912
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 44
>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 44
>ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 44
>ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 44
>ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 44
>ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 44
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:03:00.0: setting latency timer to 64
>r8169 0000:03:00.0: irq 45 for MSI/MSI-X
>r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc9000005c000, 00:1f:d0:2d:00:00, XID 1c4000c0 IRQ 45
>firewire_ohci 0000:04:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:04:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>it87: Found IT8720F chip at 0x290, revision 5
>it87: VID is disabled (pins used for GPIO)
>it87: in3 is VCC (+5V)
>it87: Beeping is supported
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC889A: BIOS auto-probing.
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: irq 47 for MSI/MSI-X
>HDA Intel 0000:01:00.1: setting latency timer to 64
>ALSA device list:
>  #0: HDA Intel at 0xfdff8000 irq 46
>  #1: HDA ATI HDMI at 0xfdefc000 irq 47
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 10
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
>ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-6: new high speed USB device using ehci_hcd and address 3
>firewire_core: created device fw0: GUID 002ee48f00001fd0, S400
>hub 2-6:1.0: USB hub found
>hub 2-6:1.0: 3 ports detected
>usb 8-1: new full speed USB device using uhci_hcd and address 2
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>usb 2-6.1: new high speed USB device using ehci_hcd and address 4
>uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
>input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input2
>usb 2-6.2: new high speed USB device using ehci_hcd and address 5
>ata2.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata2.00: configured for UDMA/133
>hub 2-6.2:1.0: USB hub found
>hub 2-6.2:1.0: 3 ports detected
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>usb 2-6.3: new full speed USB device using ehci_hcd and address 6
>input: HID 0a12:1000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.0/input/input3
>generic-usb 0003:0A12:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a12:1000] on usb-0000:00:1d.7-6.3/input0
>input: HID 0a12:1000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.1/input/input4
>generic-usb 0003:0A12:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a12:1000] on usb-0000:00:1d.7-6.3/input1
>usb 2-6.2.2: new low speed USB device using ehci_hcd and address 7
>input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2.2/2-6.2.2:1.0/input/input5
>apple 0003:05AC:0221.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2.2/input0
>input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2.2/2-6.2.2:1.1/input/input6
>apple 0003:05AC:0221.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2.2/input1
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: HPA detected: current 625140335, native 625142448
>ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
>ata3.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4
>sd 2:0:0:0: [sdc] Attached SCSI disk
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 2.00, max UDMA/100
>ata6.00: configured for UDMA/100
>scsi 5:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22LS30 2.00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>rtc_cmos 00:04: setting system clock to 2010-07-10 07:59:17 UTC (1278748757)
>EXT4-fs (sdc2): INFO: recovery required on readonly filesystem
>EXT4-fs (sdc2): write access will be enabled during recovery
>EXT4-fs (sdc2): orphan cleanup on readonly fs
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320849
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320850
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320898
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320899
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320921
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320911
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320913
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 320914
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 230954
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 230311
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 230325
>EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 626576
>EXT4-fs (sdc2): 12 orphan inodes deleted
>EXT4-fs (sdc2): recovery complete
>EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext2 filesystem) readonly on device 8:34.
>Freeing unused kernel memory: 412k freed
>udev: starting version 149
>usb 2-6.3: USB disconnect, address 6
>usb 2-6.3: new full speed USB device using ehci_hcd and address 8
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>EXT4-fs (sdc2): re-mounted. Opts: (null)
>EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
>Adding 8875908k swap on /dev/sdc4.  Priority:-1 extents:1 across:8875908k 
>r8169 0000:03:00.0: eth0: link up
>r8169 0000:03:00.0: eth0: link up
>Bridge firewalling registered
>input: daniels Maus as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.0/bluetooth/hci0/hci0:46/input7
>magicmouse 0005:05AC:030D.0005: input,hidraw0: BLUETOOTH HID v0.84 Mouse [daniels Maus] on 00:0F:3D:38:C8:A7
>input: daniels Maus as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.0/bluetooth/hci0/hci0:46/input8
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>eth0: no IPv6 routers present
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>usb 2-6.1: USB disconnect, address 4
>usb 2-6.1: new high speed USB device using ehci_hcd and address 9
>uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
>input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input9
>usb 2-6.1: USB disconnect, address 9
>usb 2-6.1: new high speed USB device using ehci_hcd and address 10
>uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
>input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input10
>usb 2-6.1: USB disconnect, address 10
>usb 2-6.1: new high speed USB device using ehci_hcd and address 11
>uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
>input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input11
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>btusb_intr_complete: hci0 urb ffff88021659ec00 failed to resubmit (1)
>sd 2:0:0:0: [sdc] Synchronizing SCSI cache
>btusb_bulk_complete: hci0 urb ffff8802171ad6c0 failed to resubmit (1)
>ACPI handle has no context!
>btusb_bulk_complete: hci0 urb ffff8802171adc00 failed to resubmit (1)
>sd 1:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 1:0:0:0: [sdb] Stopping disk
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>sd 2:0:0:0: [sdc] Stopping disk
>uhci_hcd 0000:00:1d.1: PCI INT B disabled
>uhci_hcd 0000:00:1d.0: PCI INT A disabled
>ehci_hcd 0000:00:1a.7: PCI INT C disabled
>uhci_hcd 0000:00:1a.2: PCI INT C disabled
>uhci_hcd 0000:00:1a.1: PCI INT B disabled
>uhci_hcd 0000:00:1a.0: PCI INT A disabled
>uhci_hcd 0000:00:1d.2: PCI INT C disabled
>ehci_hcd 0000:00:1d.7: PCI INT A disabled
>HDA Intel 0000:01:00.1: PCI INT B disabled
>ACPI handle has no context!
>HDA Intel 0000:00:1b.0: PCI INT A disabled
>[drm] Disabling audio support
>PM: suspend of devices complete after 969.678 msecs
>r8169 0000:03:00.0: PME# enabled
>pcieport 0000:00:1c.4: wake-up capability enabled by ACPI
>PM: late suspend of devices complete after 40.053 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>CPU 2 is now offline
>CPU 3 is now offline
>SMP alternatives: switching to UP code
>Back to C!
>PM: Restoring platform NVS memory
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x3
>CPU1 is up
>Booting Node 0 Processor 2 APIC 0x1
>CPU2 is up
>Booting Node 0 Processor 3 APIC 0x2
>CPU3 is up
>ACPI: Waking up from system sleep state S3
>HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10c)
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfdff8004)
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
>pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20001010, writing 0x1010)
>ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xf501)
>radeon 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
>radeon 0000:01:00.0: restoring config space at offset 0x8 (was 0x1, writing 0xde01)
>radeon 0000:01:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfdee0004)
>radeon 0000:01:00.0: restoring config space at offset 0x4 (was 0xc, writing 0xe000000c)
>radeon 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800001)
>radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x20100407)
>HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20e)
>HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x4, writing 0xfdefc004)
>HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800001)
>HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
>r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
>r8169 0000:03:00.0: restoring config space at offset 0xb (was 0x816810ec, writing 0xe0001458)
>r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfdbe000c)
>r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfdbff00c)
>r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xee01)
>r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
>r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>firewire_ohci 0000:04:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105)
>firewire_ohci 0000:04:06.0: restoring config space at offset 0x5 (was 0x0, writing 0xfddf8000)
>firewire_ohci 0000:04:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfddff000)
>firewire_ohci 0000:04:06.0: restoring config space at offset 0x3 (was 0x0, writing 0x2001)
>firewire_ohci 0000:04:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
>PM: early resume of devices complete after 0.645 msecs
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>usb usb3: root hub lost power or was reset
>usb usb4: root hub lost power or was reset
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb6: root hub lost power or was reset
>usb usb7: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>usb usb8: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>ahci 0000:00:1f.2: setting latency timer to 64
>radeon 0000:01:00.0: setting latency timer to 64
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: setting latency timer to 64
>pcieport 0000:00:1c.4: wake-up capability disabled by ACPI
>r8169 0000:03:00.0: PME# disabled
>HDA Intel 0000:01:00.1: irq 47 for MSI/MSI-X
>sd 0:0:0:0: [sda] Starting disk
>sd 1:0:0:0: [sdb] Starting disk
>sd 2:0:0:0: [sdc] Starting disk
>r8169 0000:03:00.0: eth0: link up
>[drm] Clocks initialized !
>firewire_core: skipped bus generations, destroying all nodes
>[drm] ring test succeeded in 1 usecs
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>ata4: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: configured for UDMA/100
>ata5: SATA link down (SStatus 0 SControl 300)
>usb 8-1: reset full speed USB device using uhci_hcd and address 2
>firewire_core: rediscovered device fw0
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: configured for UDMA/133
>ata1: link is slow to respond, please be patient (ready=0)
>ata2: link is slow to respond, please be patient (ready=0)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: configured for UDMA/133
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>PM: resume of devices complete after 9165.495 msecs
>Restarting tasks ... 
>usb 2-6.1: USB disconnect, address 11
>done.
>usb 2-6.1: new high speed USB device using ehci_hcd and address 12
>uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
>input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input12

Actions: View

Attachments on bug 29026: 36970 | 36985 | 36997 | 43235

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.