Attachment 37628 Details for Bug 28911 – intel_dp.c downloaed yesterday and edited (no luck)

intel_dp.c downloaed yesterday and edited (no luck)

intel_dp.c (text/plain), 44.32 KB, created by lipido on 2010-08-06 04:18:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lipido

Created: 2010-08-06 04:18:04 UTC

Size: 44.32 KB

patch

obsolete

>/*
> * Copyright Â© 2008 Intel Corporation
> *
> * Permission is hereby granted, free of charge, to any person obtaining a
> * copy of this software and associated documentation files (the "Software"),
> * to deal in the Software without restriction, including without limitation
> * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> * and/or sell copies of the Software, and to permit persons to whom the
> * Software is furnished to do so, subject to the following conditions:
> *
> * The above copyright notice and this permission notice (including the next
> * paragraph) shall be included in all copies or substantial portions of the
> * Software.
> *
> * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> * IN THE SOFTWARE.
> *
> * Authors:
> *    Keith Packard <keithp@keithp.com>
> *
> */
>
>#include <linux/i2c.h>
>#include <linux/slab.h>
>#include "drmP.h"
>#include "drm.h"
>#include "drm_crtc.h"
>#include "drm_crtc_helper.h"
>#include "intel_drv.h"
>#include "i915_drm.h"
>#include "i915_drv.h"
>#include "drm_dp_helper.h"
>
>
>#define DP_LINK_STATUS_SIZE	6
>#define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
>
>#define DP_LINK_CONFIGURATION_SIZE	9
>
>#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
>#define IS_PCH_eDP(dp_priv) ((dp_priv)->is_pch_edp)
>
>struct intel_dp_priv {
>	uint32_t output_reg;
>	uint32_t DP;
>	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
>	bool has_audio;
>	int dpms_mode;
>	uint8_t link_bw;
>	uint8_t lane_count;
>	uint8_t dpcd[4];
>	struct intel_encoder *intel_encoder;
>	struct i2c_adapter adapter;
>	struct i2c_algo_dp_aux_data algo;
>	bool is_pch_edp;
>};
>
>static void
>intel_dp_link_train(struct intel_encoder *intel_encoder, uint32_t DP,
>		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
>
>static void
>intel_dp_link_down(struct intel_encoder *intel_encoder, uint32_t DP);
>
>void
>intel_edp_link_config (struct intel_encoder *intel_encoder,
>		int *lane_num, int *link_bw)
>{
>	struct intel_dp_priv   *dp_priv = intel_encoder->dev_priv;
>
>	*lane_num = dp_priv->lane_count;
>	if (dp_priv->link_bw == DP_LINK_BW_1_62)
>		*link_bw = 162000;
>	else if (dp_priv->link_bw == DP_LINK_BW_2_7)
>		*link_bw = 270000;
>}
>
>static int
>intel_dp_max_lane_count(struct intel_encoder *intel_encoder)
>{
>	struct intel_dp_priv   *dp_priv = intel_encoder->dev_priv;
>	int max_lane_count = 4;
>
>	if (dp_priv->dpcd[0] >= 0x11) {
>		max_lane_count = dp_priv->dpcd[2] & 0x1f;
>		switch (max_lane_count) {
>		case 1: case 2: case 4:
>			break;
>		default:
>			max_lane_count = 4;
>		}
>	}
>	return max_lane_count;
>}
>
>static int
>intel_dp_max_link_bw(struct intel_encoder *intel_encoder)
>{
>	struct intel_dp_priv   *dp_priv = intel_encoder->dev_priv;
>	int max_link_bw = dp_priv->dpcd[1];
>
>	switch (max_link_bw) {
>	case DP_LINK_BW_1_62:
>	case DP_LINK_BW_2_7:
>		break;
>	default:
>		max_link_bw = DP_LINK_BW_1_62;
>		break;
>	}
>	return max_link_bw;
>}
>
>static int
>intel_dp_link_clock(uint8_t link_bw)
>{
>	if (link_bw == DP_LINK_BW_2_7)
>		return 270000;
>	else
>		return 162000;
>}
>
>/* I think this is a fiction */
>static int
>intel_dp_link_required(struct drm_device *dev,
>		       struct intel_encoder *intel_encoder, int pixel_clock)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>
>	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
>		return (pixel_clock * dev_priv->edp_bpp) / 8;
>	else
>		return pixel_clock * 3;
>}
>
>static int
>intel_dp_max_data_rate(int max_link_clock, int max_lanes)
>{
>	return (max_link_clock * max_lanes * 8) / 10;
>}
>
>static int
>intel_dp_mode_valid(struct drm_connector *connector,
>		    struct drm_display_mode *mode)
>{
>	struct drm_encoder *encoder = intel_attached_encoder(connector);
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	struct drm_device *dev = connector->dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
>	int max_lanes = intel_dp_max_lane_count(intel_encoder);
>
>	if ((IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) &&
>	    dev_priv->panel_fixed_mode) {
>		if (mode->hdisplay > dev_priv->panel_fixed_mode->hdisplay)
>			return MODE_PANEL;
>
>		if (mode->vdisplay > dev_priv->panel_fixed_mode->vdisplay)
>			return MODE_PANEL;
>	}
>
>	/* only refuse the mode on non eDP since we have seen some wierd eDP panels
>	   which are outside spec tolerances but somehow work by magic */
>	if (!IS_eDP(intel_encoder) &&
>	    (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
>	     > intel_dp_max_data_rate(max_link_clock, max_lanes)))
>		return MODE_CLOCK_HIGH;
>
>	if (mode->clock < 10000)
>		return MODE_CLOCK_LOW;
>
>	return MODE_OK;
>}
>
>static uint32_t
>pack_aux(uint8_t *src, int src_bytes)
>{
>	int	i;
>	uint32_t v = 0;
>
>	if (src_bytes > 4)
>		src_bytes = 4;
>	for (i = 0; i < src_bytes; i++)
>		v |= ((uint32_t) src[i]) << ((3-i) * 8);
>	return v;
>}
>
>static void
>unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
>{
>	int i;
>	if (dst_bytes > 4)
>		dst_bytes = 4;
>	for (i = 0; i < dst_bytes; i++)
>		dst[i] = src >> ((3-i) * 8);
>}
>
>/* hrawclock is 1/4 the FSB frequency */
>static int
>intel_hrawclk(struct drm_device *dev)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	uint32_t clkcfg;
>
>	clkcfg = I915_READ(CLKCFG);
>	switch (clkcfg & CLKCFG_FSB_MASK) {
>	case CLKCFG_FSB_400:
>		return 100;
>	case CLKCFG_FSB_533:
>		return 133;
>	case CLKCFG_FSB_667:
>		return 166;
>	case CLKCFG_FSB_800:
>		return 200;
>	case CLKCFG_FSB_1067:
>		return 266;
>	case CLKCFG_FSB_1333:
>		return 333;
>	/* these two are just a guess; one of them might be right */
>	case CLKCFG_FSB_1600:
>	case CLKCFG_FSB_1600_ALT:
>		return 400;
>	default:
>		return 133;
>	}
>}
>
>static int
>intel_dp_aux_ch(struct intel_encoder *intel_encoder,
>		uint8_t *send, int send_bytes,
>		uint8_t *recv, int recv_size)
>{
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	uint32_t output_reg = dp_priv->output_reg;
>	struct drm_device *dev = intel_encoder->enc.dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	uint32_t ch_ctl = output_reg + 0x10;
>	uint32_t ch_data = ch_ctl + 4;
>	int i;
>	int recv_bytes;
>	uint32_t ctl;
>	uint32_t status;
>	uint32_t aux_clock_divider;
>	int try, precharge;
>
>	/* The clock divider is based off the hrawclk,
>	 * and would like to run at 2MHz. So, take the
>	 * hrawclk value and divide by 2 and use that
>	 */
>	if (IS_eDP(intel_encoder)) {
>		if (IS_GEN6(dev))
>			aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */
>		else
>			aux_clock_divider = 225; /* eDP input clock at 450Mhz */
>	} else if (HAS_PCH_SPLIT(dev))
>		aux_clock_divider = 62; /* IRL input clock fixed at 125Mhz */
>	else
>		aux_clock_divider = intel_hrawclk(dev) / 2;
>
>	if (IS_GEN6(dev))
>		precharge = 3;
>	else
>		precharge = 5;
>
>	/* Must try at least 3 times according to DP spec */
>	for (try = 0; try < 5; try++) {
>		/* Load the send data into the aux channel data registers */
>		for (i = 0; i < send_bytes; i += 4) {
>			uint32_t    d = pack_aux(send + i, send_bytes - i);
>	
>			I915_WRITE(ch_data + i, d);
>		}
>	
>		ctl = (DP_AUX_CH_CTL_SEND_BUSY |
>		       DP_AUX_CH_CTL_TIME_OUT_400us |
>		       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
>		       (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
>		       (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
>		       DP_AUX_CH_CTL_DONE |
>		       DP_AUX_CH_CTL_TIME_OUT_ERROR |
>		       DP_AUX_CH_CTL_RECEIVE_ERROR);
>	
>		/* Send the command and wait for it to complete */
>		I915_WRITE(ch_ctl, ctl);
>		(void) I915_READ(ch_ctl);
>		for (;;) {
>			udelay(100);
>			status = I915_READ(ch_ctl);
>			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
>				break;
>		}
>	
>		/* Clear done status and any errors */
>		I915_WRITE(ch_ctl, (status |
>				DP_AUX_CH_CTL_DONE |
>				DP_AUX_CH_CTL_TIME_OUT_ERROR |
>				DP_AUX_CH_CTL_RECEIVE_ERROR));
>		(void) I915_READ(ch_ctl);
>		if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
>			break;
>	}
>
>	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
>		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
>		return -EBUSY;
>	}
>
>	/* Check for timeout or receive error.
>	 * Timeouts occur when the sink is not connected
>	 */
>	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
>		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
>		return -EIO;
>	}
>
>	/* Timeouts occur when the device isn't connected, so they're
>	 * "normal" -- don't fill the kernel log with these */
>	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
>		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
>		return -ETIMEDOUT;
>	}
>
>	/* Unload any bytes sent back from the other side */
>	recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
>		      DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
>
>	if (recv_bytes > recv_size)
>		recv_bytes = recv_size;
>	
>	for (i = 0; i < recv_bytes; i += 4) {
>		uint32_t    d = I915_READ(ch_data + i);
>
>		unpack_aux(d, recv + i, recv_bytes - i);
>	}
>
>	return recv_bytes;
>}
>
>/* Write data to the aux channel in native mode */
>static int
>intel_dp_aux_native_write(struct intel_encoder *intel_encoder,
>			  uint16_t address, uint8_t *send, int send_bytes)
>{
>	int ret;
>	uint8_t	msg[20];
>	int msg_bytes;
>	uint8_t	ack;
>
>	if (send_bytes > 16)
>		return -1;
>	msg[0] = AUX_NATIVE_WRITE << 4;
>	msg[1] = address >> 8;
>	msg[2] = address & 0xff;
>	msg[3] = send_bytes - 1;
>	memcpy(&msg[4], send, send_bytes);
>	msg_bytes = send_bytes + 4;
>	for (;;) {
>		ret = intel_dp_aux_ch(intel_encoder, msg, msg_bytes, &ack, 1);
>		if (ret < 0)
>			return ret;
>		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
>			break;
>		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
>			udelay(100);
>		else
>			return -EIO;
>	}
>	return send_bytes;
>}
>
>/* Write a single byte to the aux channel in native mode */
>static int
>intel_dp_aux_native_write_1(struct intel_encoder *intel_encoder,
>			    uint16_t address, uint8_t byte)
>{
>	return intel_dp_aux_native_write(intel_encoder, address, &byte, 1);
>}
>
>/* read bytes from a native aux channel */
>static int
>intel_dp_aux_native_read(struct intel_encoder *intel_encoder,
>			 uint16_t address, uint8_t *recv, int recv_bytes)
>{
>	uint8_t msg[4];
>	int msg_bytes;
>	uint8_t reply[20];
>	int reply_bytes;
>	uint8_t ack;
>	int ret;
>
>	msg[0] = AUX_NATIVE_READ << 4;
>	msg[1] = address >> 8;
>	msg[2] = address & 0xff;
>	msg[3] = recv_bytes - 1;
>
>	msg_bytes = 4;
>	reply_bytes = recv_bytes + 1;
>
>	for (;;) {
>		ret = intel_dp_aux_ch(intel_encoder, msg, msg_bytes,
>				      reply, reply_bytes);
>		if (ret == 0)
>			return -EPROTO;
>		if (ret < 0)
>			return ret;
>		ack = reply[0];
>		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
>			memcpy(recv, reply + 1, ret - 1);
>			return ret - 1;
>		}
>		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
>			udelay(100);
>		else
>			return -EIO;
>	}
>}
>
>static int
>intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
>		    uint8_t write_byte, uint8_t *read_byte)
>{
>	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
>	struct intel_dp_priv *dp_priv = container_of(adapter,
>						     struct intel_dp_priv,
>						     adapter);
>	struct intel_encoder *intel_encoder = dp_priv->intel_encoder;
>	uint16_t address = algo_data->address;
>	uint8_t msg[5];
>	uint8_t reply[2];
>	int msg_bytes;
>	int reply_bytes;
>	int ret;
>
>	/* Set up the command byte */
>	if (mode & MODE_I2C_READ)
>		msg[0] = AUX_I2C_READ << 4;
>	else
>		msg[0] = AUX_I2C_WRITE << 4;
>
>	if (!(mode & MODE_I2C_STOP))
>		msg[0] |= AUX_I2C_MOT << 4;
>
>	msg[1] = address >> 8;
>	msg[2] = address;
>
>	switch (mode) {
>	case MODE_I2C_WRITE:
>		msg[3] = 0;
>		msg[4] = write_byte;
>		msg_bytes = 5;
>		reply_bytes = 1;
>		break;
>	case MODE_I2C_READ:
>		msg[3] = 0;
>		msg_bytes = 4;
>		reply_bytes = 2;
>		break;
>	default:
>		msg_bytes = 3;
>		reply_bytes = 1;
>		break;
>	}
>
>	for (;;) {
>	  ret = intel_dp_aux_ch(intel_encoder,
>				msg, msg_bytes,
>				reply, reply_bytes);
>		if (ret < 0) {
>			DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
>			return ret;
>		}
>		switch (reply[0] & AUX_I2C_REPLY_MASK) {
>		case AUX_I2C_REPLY_ACK:
>			if (mode == MODE_I2C_READ) {
>				*read_byte = reply[1];
>			}
>			return reply_bytes - 1;
>		case AUX_I2C_REPLY_NACK:
>			DRM_DEBUG_KMS("aux_ch nack\n");
>			return -EREMOTEIO;
>		case AUX_I2C_REPLY_DEFER:
>			DRM_DEBUG_KMS("aux_ch defer\n");
>			udelay(100);
>			break;
>		default:
>			DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
>			return -EREMOTEIO;
>		}
>	}
>}
>
>static int
>intel_dp_i2c_init(struct intel_encoder *intel_encoder,
>		  struct intel_connector *intel_connector, const char *name)
>{
>	struct intel_dp_priv   *dp_priv = intel_encoder->dev_priv;
>
>	DRM_DEBUG_KMS("i2c_init %s\n", name);
>	dp_priv->algo.running = false;
>	dp_priv->algo.address = 0;
>	dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
>
>	memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
>	dp_priv->adapter.owner = THIS_MODULE;
>	dp_priv->adapter.class = I2C_CLASS_DDC;
>	strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1);
>	dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0';
>	dp_priv->adapter.algo_data = &dp_priv->algo;
>	dp_priv->adapter.dev.parent = &intel_connector->base.kdev;
>	
>	return i2c_dp_aux_add_bus(&dp_priv->adapter);
>}
>
>static bool
>intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
>		    struct drm_display_mode *adjusted_mode)
>{
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct intel_dp_priv   *dp_priv = intel_encoder->dev_priv;
>	struct drm_device *dev = encoder->dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	int lane_count, clock;
>	int max_lane_count = intel_dp_max_lane_count(intel_encoder);
>	int max_clock = intel_dp_max_link_bw(intel_encoder) == DP_LINK_BW_2_7 ? 1 : 0;
>	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
>
>	if ((IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) &&
>	    dev_priv->panel_fixed_mode) {
>		struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;
>
>		adjusted_mode->hdisplay = fixed_mode->hdisplay;
>		adjusted_mode->hsync_start = fixed_mode->hsync_start;
>		adjusted_mode->hsync_end = fixed_mode->hsync_end;
>		adjusted_mode->htotal = fixed_mode->htotal;
>
>		adjusted_mode->vdisplay = fixed_mode->vdisplay;
>		adjusted_mode->vsync_start = fixed_mode->vsync_start;
>		adjusted_mode->vsync_end = fixed_mode->vsync_end;
>		adjusted_mode->vtotal = fixed_mode->vtotal;
>
>		adjusted_mode->clock = fixed_mode->clock;
>		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
>
>		/*
>		 * the mode->clock is used to calculate the Data&Link M/N
>		 * of the pipe. For the eDP the fixed clock should be used.
>		 */
>		mode->clock = dev_priv->panel_fixed_mode->clock;
>	}
>
>	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
>		for (clock = 0; clock <= max_clock; clock++) {
>			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
>
>			if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock)
>					<= link_avail) {
>				dp_priv->link_bw = bws[clock];
>				dp_priv->lane_count = lane_count;
>				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
>				DRM_DEBUG_KMS("Display port link bw %02x lane "
>						"count %d clock %d\n",
>				       dp_priv->link_bw, dp_priv->lane_count,
>				       adjusted_mode->clock);
>				return true;
>			}
>		}
>	}
>
>	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
>		/* okay we failed just pick the highest */
>		dp_priv->lane_count = max_lane_count;
>		dp_priv->link_bw = bws[max_clock];
>		adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
>		DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
>			      "count %d clock %d\n",
>			      dp_priv->link_bw, dp_priv->lane_count,
>			      adjusted_mode->clock);
>		return true;
>	}
>	return false;
>}
>
>struct intel_dp_m_n {
>	uint32_t	tu;
>	uint32_t	gmch_m;
>	uint32_t	gmch_n;
>	uint32_t	link_m;
>	uint32_t	link_n;
>};
>
>static void
>intel_reduce_ratio(uint32_t *num, uint32_t *den)
>{
>	while (*num > 0xffffff || *den > 0xffffff) {
>		*num >>= 1;
>		*den >>= 1;
>	}
>}
>
>static void
>intel_dp_compute_m_n(int bpp,
>		     int nlanes,
>		     int pixel_clock,
>		     int link_clock,
>		     struct intel_dp_m_n *m_n)
>{
>	m_n->tu = 64;
>	m_n->gmch_m = (pixel_clock * bpp) >> 3;
>	m_n->gmch_n = link_clock * nlanes;
>	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
>	m_n->link_m = pixel_clock;
>	m_n->link_n = link_clock;
>	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
>}
>
>bool intel_pch_has_edp(struct drm_crtc *crtc)
>{
>	struct drm_device *dev = crtc->dev;
>	struct drm_mode_config *mode_config = &dev->mode_config;
>	struct drm_encoder *encoder;
>
>	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
>		struct intel_encoder *intel_encoder;
>		struct intel_dp_priv *dp_priv;
>
>		if (!encoder || encoder->crtc != crtc)
>			continue;
>
>		intel_encoder = enc_to_intel_encoder(encoder);
>		dp_priv = intel_encoder->dev_priv;
>
>		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT)
>			return dp_priv->is_pch_edp;
>	}
>	return false;
>}
>
>void
>intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
>		 struct drm_display_mode *adjusted_mode)
>{
>	struct drm_device *dev = crtc->dev;
>	struct drm_mode_config *mode_config = &dev->mode_config;
>	struct drm_encoder *encoder;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>	int lane_count = 4, bpp = 24;
>	struct intel_dp_m_n m_n;
>
>	/*
>	 * Find the lane count in the intel_encoder private
>	 */
>	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
>		struct intel_encoder *intel_encoder;
>		struct intel_dp_priv *dp_priv;
>
>		if (encoder->crtc != crtc)
>			continue;
>
>		intel_encoder = enc_to_intel_encoder(encoder);
>		dp_priv = intel_encoder->dev_priv;
>
>		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
>			lane_count = dp_priv->lane_count;
>			if (IS_PCH_eDP(dp_priv))
>				bpp = dev_priv->edp_bpp;
>			break;
>		}
>	}
>
>	/*
>	 * Compute the GMCH and Link ratios. The '3' here is
>	 * the number of bytes_per_pixel post-LUT, which we always
>	 * set up for 8-bits of R/G/B, or 3 bytes total.
>	 */
>	intel_dp_compute_m_n(bpp, lane_count,
>			     mode->clock, adjusted_mode->clock, &m_n);
>
>	if (HAS_PCH_SPLIT(dev)) {
>		if (intel_crtc->pipe == 0) {
>			I915_WRITE(TRANSA_DATA_M1,
>				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
>				   m_n.gmch_m);
>			I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n);
>			I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m);
>			I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n);
>		} else {
>			I915_WRITE(TRANSB_DATA_M1,
>				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
>				   m_n.gmch_m);
>			I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n);
>			I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m);
>			I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n);
>		}
>	} else {
>		if (intel_crtc->pipe == 0) {
>			I915_WRITE(PIPEA_GMCH_DATA_M,
>				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
>				   m_n.gmch_m);
>			I915_WRITE(PIPEA_GMCH_DATA_N,
>				   m_n.gmch_n);
>			I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
>			I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
>		} else {
>			I915_WRITE(PIPEB_GMCH_DATA_M,
>				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
>				   m_n.gmch_m);
>			I915_WRITE(PIPEB_GMCH_DATA_N,
>					m_n.gmch_n);
>			I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
>			I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
>		}
>	}
>}
>
>static void
>intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
>		  struct drm_display_mode *adjusted_mode)
>{
>	struct drm_device *dev = encoder->dev;
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	struct drm_crtc *crtc = intel_encoder->enc.crtc;
>	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>
>	dp_priv->DP = (DP_VOLTAGE_0_4 |
>		       DP_PRE_EMPHASIS_0);
>
>	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
>		dp_priv->DP |= DP_SYNC_HS_HIGH;
>	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
>		dp_priv->DP |= DP_SYNC_VS_HIGH;
>
>	if (HAS_PCH_CPT(dev) && !IS_eDP(intel_encoder))
>		dp_priv->DP |= DP_LINK_TRAIN_OFF_CPT;
>	else
>		dp_priv->DP |= DP_LINK_TRAIN_OFF;
>
>	switch (dp_priv->lane_count) {
>	case 1:
>		dp_priv->DP |= DP_PORT_WIDTH_1;
>		break;
>	case 2:
>		dp_priv->DP |= DP_PORT_WIDTH_2;
>		break;
>	case 4:
>		dp_priv->DP |= DP_PORT_WIDTH_4;
>		break;
>	}
>	if (dp_priv->has_audio)
>		dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
>
>	memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
>	dp_priv->link_configuration[0] = dp_priv->link_bw;
>	dp_priv->link_configuration[1] = dp_priv->lane_count;
>
>	/*
>	 * Check for DPCD version > 1.1 and enhanced framing support
>	 */
>	if (dp_priv->dpcd[0] >= 0x11 && (dp_priv->dpcd[2] & DP_ENHANCED_FRAME_CAP)) {
>		dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
>		dp_priv->DP |= DP_ENHANCED_FRAMING;
>	}
>
>	/* CPT DP's pipe select is decided in TRANS_DP_CTL */
>	if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
>		dp_priv->DP |= DP_PIPEB_SELECT;
>
>	if (IS_eDP(intel_encoder)) {
>		/* don't miss out required setting for eDP */
>		dp_priv->DP |= DP_PLL_ENABLE;
>		if (adjusted_mode->clock < 200000)
>			dp_priv->DP |= DP_PLL_FREQ_160MHZ;
>		else
>			dp_priv->DP |= DP_PLL_FREQ_270MHZ;
>	}
>}
>
>static void ironlake_edp_panel_on (struct drm_device *dev)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
>	u32 pp, pp_status;
>
>	pp_status = I915_READ(PCH_PP_STATUS);
>	if (pp_status & PP_ON)
>		return;
>
>	pp = I915_READ(PCH_PP_CONTROL);
>	pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
>	I915_WRITE(PCH_PP_CONTROL, pp);
>	do {
>		pp_status = I915_READ(PCH_PP_STATUS);
>	} while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout));
>
>	if (time_after(jiffies, timeout))
>		DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status);
>
>	pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD);
>	I915_WRITE(PCH_PP_CONTROL, pp);
>}
>
>static void ironlake_edp_panel_off (struct drm_device *dev)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
>	u32 pp, pp_status;
>
>	pp = I915_READ(PCH_PP_CONTROL);
>	pp &= ~POWER_TARGET_ON;
>	I915_WRITE(PCH_PP_CONTROL, pp);
>	do {
>		pp_status = I915_READ(PCH_PP_STATUS);
>	} while ((pp_status & PP_ON) && !time_after(jiffies, timeout));
>
>	if (time_after(jiffies, timeout))
>		DRM_DEBUG_KMS("panel off wait timed out\n");
>
>	/* Make sure VDD is enabled so DP AUX will work */
>	pp |= EDP_FORCE_VDD;
>	I915_WRITE(PCH_PP_CONTROL, pp);
>}
>
>static void ironlake_edp_backlight_on (struct drm_device *dev)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	u32 pp;
>
>	DRM_DEBUG_KMS("\n");
>	pp = I915_READ(PCH_PP_CONTROL);
>	pp |= EDP_BLC_ENABLE;
>	I915_WRITE(PCH_PP_CONTROL, pp);
>}
>
>static void ironlake_edp_backlight_off (struct drm_device *dev)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	u32 pp;
>
>	DRM_DEBUG_KMS("\n");
>	pp = I915_READ(PCH_PP_CONTROL);
>	pp &= ~EDP_BLC_ENABLE;
>	I915_WRITE(PCH_PP_CONTROL, pp);
>}
>
>static void
>intel_dp_dpms(struct drm_encoder *encoder, int mode)
>{
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	struct drm_device *dev = encoder->dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	uint32_t dp_reg = I915_READ(dp_priv->output_reg);
>
>	if (mode != DRM_MODE_DPMS_ON) {
>		if (dp_reg & DP_PORT_EN) {
>			intel_dp_link_down(intel_encoder, dp_priv->DP);
>			if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
>				ironlake_edp_backlight_off(dev);
>//patch lipido				ironlake_edp_panel_off(dev);
>			}
>		}
>	} else {
>		if (!(dp_reg & DP_PORT_EN)) {
>			intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
>			if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
>				ironlake_edp_panel_on(dev);
>				ironlake_edp_backlight_on(dev);
>			}
>		}
>	}
>	dp_priv->dpms_mode = mode;
>}
>
>/*
> * Fetch AUX CH registers 0x202 - 0x207 which contain
> * link status information
> */
>static bool
>intel_dp_get_link_status(struct intel_encoder *intel_encoder,
>			 uint8_t link_status[DP_LINK_STATUS_SIZE])
>{
>	int ret;
>
>	ret = intel_dp_aux_native_read(intel_encoder,
>				       DP_LANE0_1_STATUS,
>				       link_status, DP_LINK_STATUS_SIZE);
>	if (ret != DP_LINK_STATUS_SIZE)
>		return false;
>	return true;
>}
>
>static uint8_t
>intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
>		     int r)
>{
>	return link_status[r - DP_LANE0_1_STATUS];
>}
>
>static uint8_t
>intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
>				 int lane)
>{
>	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
>	int	    s = ((lane & 1) ?
>			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
>			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
>	uint8_t l = intel_dp_link_status(link_status, i);
>
>	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
>}
>
>static uint8_t
>intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
>				      int lane)
>{
>	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
>	int	    s = ((lane & 1) ?
>			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
>			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
>	uint8_t l = intel_dp_link_status(link_status, i);
>
>	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
>}
>
>
>#if 0
>static char	*voltage_names[] = {
>	"0.4V", "0.6V", "0.8V", "1.2V"
>};
>static char	*pre_emph_names[] = {
>	"0dB", "3.5dB", "6dB", "9.5dB"
>};
>static char	*link_train_names[] = {
>	"pattern 1", "pattern 2", "idle", "off"
>};
>#endif
>
>/*
> * These are source-specific values; current Intel hardware supports
> * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
> */
>#define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
>
>static uint8_t
>intel_dp_pre_emphasis_max(uint8_t voltage_swing)
>{
>	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
>	case DP_TRAIN_VOLTAGE_SWING_400:
>		return DP_TRAIN_PRE_EMPHASIS_6;
>	case DP_TRAIN_VOLTAGE_SWING_600:
>		return DP_TRAIN_PRE_EMPHASIS_6;
>	case DP_TRAIN_VOLTAGE_SWING_800:
>		return DP_TRAIN_PRE_EMPHASIS_3_5;
>	case DP_TRAIN_VOLTAGE_SWING_1200:
>	default:
>		return DP_TRAIN_PRE_EMPHASIS_0;
>	}
>}
>
>static void
>intel_get_adjust_train(struct intel_encoder *intel_encoder,
>		       uint8_t link_status[DP_LINK_STATUS_SIZE],
>		       int lane_count,
>		       uint8_t train_set[4])
>{
>	uint8_t v = 0;
>	uint8_t p = 0;
>	int lane;
>
>	for (lane = 0; lane < lane_count; lane++) {
>		uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
>		uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
>
>		if (this_v > v)
>			v = this_v;
>		if (this_p > p)
>			p = this_p;
>	}
>
>	if (v >= I830_DP_VOLTAGE_MAX)
>		v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
>
>	if (p >= intel_dp_pre_emphasis_max(v))
>		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
>
>	for (lane = 0; lane < 4; lane++)
>		train_set[lane] = v | p;
>}
>
>static uint32_t
>intel_dp_signal_levels(uint8_t train_set, int lane_count)
>{
>	uint32_t	signal_levels = 0;
>
>	switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
>	case DP_TRAIN_VOLTAGE_SWING_400:
>	default:
>		signal_levels |= DP_VOLTAGE_0_4;
>		break;
>	case DP_TRAIN_VOLTAGE_SWING_600:
>		signal_levels |= DP_VOLTAGE_0_6;
>		break;
>	case DP_TRAIN_VOLTAGE_SWING_800:
>		signal_levels |= DP_VOLTAGE_0_8;
>		break;
>	case DP_TRAIN_VOLTAGE_SWING_1200:
>		signal_levels |= DP_VOLTAGE_1_2;
>		break;
>	}
>	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
>	case DP_TRAIN_PRE_EMPHASIS_0:
>	default:
>		signal_levels |= DP_PRE_EMPHASIS_0;
>		break;
>	case DP_TRAIN_PRE_EMPHASIS_3_5:
>		signal_levels |= DP_PRE_EMPHASIS_3_5;
>		break;
>	case DP_TRAIN_PRE_EMPHASIS_6:
>		signal_levels |= DP_PRE_EMPHASIS_6;
>		break;
>	case DP_TRAIN_PRE_EMPHASIS_9_5:
>		signal_levels |= DP_PRE_EMPHASIS_9_5;
>		break;
>	}
>	return signal_levels;
>}
>
>/* Gen6's DP voltage swing and pre-emphasis control */
>static uint32_t
>intel_gen6_edp_signal_levels(uint8_t train_set)
>{
>	switch (train_set & (DP_TRAIN_VOLTAGE_SWING_MASK|DP_TRAIN_PRE_EMPHASIS_MASK)) {
>	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
>		return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
>	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
>		return EDP_LINK_TRAIN_400MV_6DB_SNB_B;
>	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
>		return EDP_LINK_TRAIN_600MV_3_5DB_SNB_B;
>	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
>		return EDP_LINK_TRAIN_800MV_0DB_SNB_B;
>	default:
>		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level\n");
>		return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
>	}
>}
>
>static uint8_t
>intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
>		      int lane)
>{
>	int i = DP_LANE0_1_STATUS + (lane >> 1);
>	int s = (lane & 1) * 4;
>	uint8_t l = intel_dp_link_status(link_status, i);
>
>	return (l >> s) & 0xf;
>}
>
>/* Check for clock recovery is done on all channels */
>static bool
>intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
>{
>	int lane;
>	uint8_t lane_status;
>
>	for (lane = 0; lane < lane_count; lane++) {
>		lane_status = intel_get_lane_status(link_status, lane);
>		if ((lane_status & DP_LANE_CR_DONE) == 0)
>			return false;
>	}
>	return true;
>}
>
>/* Check to see if channel eq is done on all channels */
>#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
>			 DP_LANE_CHANNEL_EQ_DONE|\
>			 DP_LANE_SYMBOL_LOCKED)
>static bool
>intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
>{
>	uint8_t lane_align;
>	uint8_t lane_status;
>	int lane;
>
>	lane_align = intel_dp_link_status(link_status,
>					  DP_LANE_ALIGN_STATUS_UPDATED);
>	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
>		return false;
>	for (lane = 0; lane < lane_count; lane++) {
>		lane_status = intel_get_lane_status(link_status, lane);
>		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
>			return false;
>	}
>	return true;
>}
>
>static bool
>intel_dp_set_link_train(struct intel_encoder *intel_encoder,
>			uint32_t dp_reg_value,
>			uint8_t dp_train_pat,
>			uint8_t train_set[4],
>			bool first)
>{
>	struct drm_device *dev = intel_encoder->enc.dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	int ret;
>
>	I915_WRITE(dp_priv->output_reg, dp_reg_value);
>	POSTING_READ(dp_priv->output_reg);
>	if (first)
>		intel_wait_for_vblank(dev);
>
>	intel_dp_aux_native_write_1(intel_encoder,
>				    DP_TRAINING_PATTERN_SET,
>				    dp_train_pat);
>
>	ret = intel_dp_aux_native_write(intel_encoder,
>					DP_TRAINING_LANE0_SET, train_set, 4);
>	if (ret != 4)
>		return false;
>
>	return true;
>}
>
>static void
>intel_dp_link_train(struct intel_encoder *intel_encoder, uint32_t DP,
>		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
>{
>	struct drm_device *dev = intel_encoder->enc.dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	uint8_t	train_set[4];
>	uint8_t link_status[DP_LINK_STATUS_SIZE];
>	int i;
>	uint8_t voltage;
>	bool clock_recovery = false;
>	bool channel_eq = false;
>	bool first = true;
>	int tries;
>	u32 reg;
>
>	/* Write the link configuration data */
>	intel_dp_aux_native_write(intel_encoder, DP_LINK_BW_SET,
>				  link_configuration, DP_LINK_CONFIGURATION_SIZE);
>
>	DP |= DP_PORT_EN;
>	if (HAS_PCH_CPT(dev) && !IS_eDP(intel_encoder))
>		DP &= ~DP_LINK_TRAIN_MASK_CPT;
>	else
>		DP &= ~DP_LINK_TRAIN_MASK;
>	memset(train_set, 0, 4);
>	voltage = 0xff;
>	tries = 0;
>	clock_recovery = false;
>	for (;;) {
>		/* Use train_set[0] to set the voltage and pre emphasis values */
>		uint32_t    signal_levels;
>		if (IS_GEN6(dev) && IS_eDP(intel_encoder)) {
>			signal_levels = intel_gen6_edp_signal_levels(train_set[0]);
>			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
>		} else {
>			signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
>			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
>		}
>
>		if (HAS_PCH_CPT(dev) && !IS_eDP(intel_encoder))
>			reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
>		else
>			reg = DP | DP_LINK_TRAIN_PAT_1;
>
>		if (!intel_dp_set_link_train(intel_encoder, reg,
>					     DP_TRAINING_PATTERN_1, train_set, first))
>			break;
>		first = false;
>		/* Set training pattern 1 */
>
>		udelay(100);
>		if (!intel_dp_get_link_status(intel_encoder, link_status))
>			break;
>
>		if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
>			clock_recovery = true;
>			break;
>		}
>
>		/* Check to see if we've tried the max voltage */
>		for (i = 0; i < dp_priv->lane_count; i++)
>			if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
>				break;
>		if (i == dp_priv->lane_count)
>			break;
>
>		/* Check to see if we've tried the same voltage 5 times */
>		if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
>			++tries;
>			if (tries == 5)
>				break;
>		} else
>			tries = 0;
>		voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
>
>		/* Compute new train_set as requested by target */
>		intel_get_adjust_train(intel_encoder, link_status, dp_priv->lane_count, train_set);
>	}
>
>	/* channel equalization */
>	tries = 0;
>	channel_eq = false;
>	for (;;) {
>		/* Use train_set[0] to set the voltage and pre emphasis values */
>		uint32_t    signal_levels;
>
>		if (IS_GEN6(dev) && IS_eDP(intel_encoder)) {
>			signal_levels = intel_gen6_edp_signal_levels(train_set[0]);
>			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
>		} else {
>			signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
>			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
>		}
>
>		if (HAS_PCH_CPT(dev) && !IS_eDP(intel_encoder))
>			reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
>		else
>			reg = DP | DP_LINK_TRAIN_PAT_2;
>
>		/* channel eq pattern */
>		if (!intel_dp_set_link_train(intel_encoder, reg,
>					     DP_TRAINING_PATTERN_2, train_set,
>					     false))
>			break;
>
>		udelay(400);
>		if (!intel_dp_get_link_status(intel_encoder, link_status))
>			break;
>
>		if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
>			channel_eq = true;
>			break;
>		}
>
>		/* Try 5 times */
>		if (tries > 5)
>			break;
>
>		/* Compute new train_set as requested by target */
>		intel_get_adjust_train(intel_encoder, link_status, dp_priv->lane_count, train_set);
>		++tries;
>	}
>
>	if (HAS_PCH_CPT(dev) && !IS_eDP(intel_encoder))
>		reg = DP | DP_LINK_TRAIN_OFF_CPT;
>	else
>		reg = DP | DP_LINK_TRAIN_OFF;
>
>	I915_WRITE(dp_priv->output_reg, reg);
>	POSTING_READ(dp_priv->output_reg);
>	intel_dp_aux_native_write_1(intel_encoder,
>				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
>}
>
>static void
>intel_dp_link_down(struct intel_encoder *intel_encoder, uint32_t DP)
>{
>	struct drm_device *dev = intel_encoder->enc.dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>
>	DRM_DEBUG_KMS("\n");
>
>	if (IS_eDP(intel_encoder)) {
>		DP &= ~DP_PLL_ENABLE;
>		I915_WRITE(dp_priv->output_reg, DP);
>		POSTING_READ(dp_priv->output_reg);
>		udelay(100);
>	}
>
>	if (HAS_PCH_CPT(dev) && !IS_eDP(intel_encoder)) {
>		DP &= ~DP_LINK_TRAIN_MASK_CPT;
>		I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
>		POSTING_READ(dp_priv->output_reg);
>	} else {
>		DP &= ~DP_LINK_TRAIN_MASK;
>		I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
>		POSTING_READ(dp_priv->output_reg);
>	}
>
>	udelay(17000);
>
>	if (IS_eDP(intel_encoder))
>		DP |= DP_LINK_TRAIN_OFF;
>	I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
>	POSTING_READ(dp_priv->output_reg);
>}
>
>/*
> * According to DP spec
> * 5.1.2:
> *  1. Read DPCD
> *  2. Configure link according to Receiver Capabilities
> *  3. Use Link Training from 2.5.3.3 and 3.5.1.3
> *  4. Check link status on receipt of hot-plug interrupt
> */
>
>static void
>intel_dp_check_link_status(struct intel_encoder *intel_encoder)
>{
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	uint8_t link_status[DP_LINK_STATUS_SIZE];
>
>	if (!intel_encoder->enc.crtc)
>		return;
>
>	if (!intel_dp_get_link_status(intel_encoder, link_status)) {
>		intel_dp_link_down(intel_encoder, dp_priv->DP);
>		return;
>	}
>
>	if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
>		intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
>}
>
>static enum drm_connector_status
>ironlake_dp_detect(struct drm_connector *connector)
>{
>	struct drm_encoder *encoder = intel_attached_encoder(connector);
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	enum drm_connector_status status;
>
>	status = connector_status_disconnected;
>	if (intel_dp_aux_native_read(intel_encoder,
>				     0x000, dp_priv->dpcd,
>				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
>	{
>		if (dp_priv->dpcd[0] != 0)
>			status = connector_status_connected;
>	}
>	DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", dp_priv->dpcd[0],
>		      dp_priv->dpcd[1], dp_priv->dpcd[2], dp_priv->dpcd[3]);
>	return status;
>}
>
>/**
> * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
> *
> * \return true if DP port is connected.
> * \return false if DP port is disconnected.
> */
>static enum drm_connector_status
>intel_dp_detect(struct drm_connector *connector)
>{
>	struct drm_encoder *encoder = intel_attached_encoder(connector);
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct drm_device *dev = intel_encoder->enc.dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	uint32_t temp, bit;
>	enum drm_connector_status status;
>
>	dp_priv->has_audio = false;
>
>	if (HAS_PCH_SPLIT(dev))
>		return ironlake_dp_detect(connector);
>
>	switch (dp_priv->output_reg) {
>	case DP_B:
>		bit = DPB_HOTPLUG_INT_STATUS;
>		break;
>	case DP_C:
>		bit = DPC_HOTPLUG_INT_STATUS;
>		break;
>	case DP_D:
>		bit = DPD_HOTPLUG_INT_STATUS;
>		break;
>	default:
>		return connector_status_unknown;
>	}
>
>	temp = I915_READ(PORT_HOTPLUG_STAT);
>
>	if ((temp & bit) == 0)
>		return connector_status_disconnected;
>
>	status = connector_status_disconnected;
>	if (intel_dp_aux_native_read(intel_encoder,
>				     0x000, dp_priv->dpcd,
>				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
>	{
>		if (dp_priv->dpcd[0] != 0)
>			status = connector_status_connected;
>	}
>	return status;
>}
>
>static int intel_dp_get_modes(struct drm_connector *connector)
>{
>	struct drm_encoder *encoder = intel_attached_encoder(connector);
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>	struct drm_device *dev = intel_encoder->enc.dev;
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>	int ret;
>
>	/* We should parse the EDID data and find out if it has an audio sink
>	 */
>
>	ret = intel_ddc_get_modes(connector, intel_encoder->ddc_bus);
>	if (ret) {
>		if ((IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) &&
>		    !dev_priv->panel_fixed_mode) {
>			struct drm_display_mode *newmode;
>			list_for_each_entry(newmode, &connector->probed_modes,
>					    head) {
>				if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
>					dev_priv->panel_fixed_mode =
>						drm_mode_duplicate(dev, newmode);
>					break;
>				}
>			}
>		}
>
>		return ret;
>	}
>
>	/* if eDP has no EDID, try to use fixed panel mode from VBT */
>	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
>		if (dev_priv->panel_fixed_mode != NULL) {
>			struct drm_display_mode *mode;
>			mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
>			drm_mode_probed_add(connector, mode);
>			return 1;
>		}
>	}
>	return 0;
>}
>
>static void
>intel_dp_destroy (struct drm_connector *connector)
>{
>	drm_sysfs_connector_remove(connector);
>	drm_connector_cleanup(connector);
>	kfree(connector);
>}
>
>static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
>	.dpms = intel_dp_dpms,
>	.mode_fixup = intel_dp_mode_fixup,
>	.prepare = intel_encoder_prepare,
>	.mode_set = intel_dp_mode_set,
>	.commit = intel_encoder_commit,
>};
>
>static const struct drm_connector_funcs intel_dp_connector_funcs = {
>	.dpms = drm_helper_connector_dpms,
>	.detect = intel_dp_detect,
>	.fill_modes = drm_helper_probe_single_connector_modes,
>	.destroy = intel_dp_destroy,
>};
>
>static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
>	.get_modes = intel_dp_get_modes,
>	.mode_valid = intel_dp_mode_valid,
>	.best_encoder = intel_attached_encoder,
>};
>
>static void intel_dp_enc_destroy(struct drm_encoder *encoder)
>{
>	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
>
>	if (intel_encoder->i2c_bus)
>		intel_i2c_destroy(intel_encoder->i2c_bus);
>	drm_encoder_cleanup(encoder);
>	kfree(intel_encoder);
>}
>
>static const struct drm_encoder_funcs intel_dp_enc_funcs = {
>	.destroy = intel_dp_enc_destroy,
>};
>
>void
>intel_dp_hot_plug(struct intel_encoder *intel_encoder)
>{
>	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>
>	if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
>		intel_dp_check_link_status(intel_encoder);
>}
>
>/* Return which DP Port should be selected for Transcoder DP control */
>int
>intel_trans_dp_port_sel (struct drm_crtc *crtc)
>{
>	struct drm_device *dev = crtc->dev;
>	struct drm_mode_config *mode_config = &dev->mode_config;
>	struct drm_encoder *encoder;
>	struct intel_encoder *intel_encoder = NULL;
>
>	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
>		if (encoder->crtc != crtc)
>			continue;
>
>		intel_encoder = enc_to_intel_encoder(encoder);
>		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
>			struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
>			return dp_priv->output_reg;
>		}
>	}
>	return -1;
>}
>
>/* check the VBT to see whether the eDP is on DP-D port */
>bool intel_dpd_is_edp(struct drm_device *dev)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct child_device_config *p_child;
>	int i;
>
>	if (!dev_priv->child_dev_num)
>		return false;
>
>	for (i = 0; i < dev_priv->child_dev_num; i++) {
>		p_child = dev_priv->child_dev + i;
>
>		if (p_child->dvo_port == PORT_IDPD &&
>		    p_child->device_type == DEVICE_TYPE_eDP)
>			return true;
>	}
>	return false;
>}
>
>void
>intel_dp_init(struct drm_device *dev, int output_reg)
>{
>	struct drm_i915_private *dev_priv = dev->dev_private;
>	struct drm_connector *connector;
>	struct intel_encoder *intel_encoder;
>	struct intel_connector *intel_connector;
>	struct intel_dp_priv *dp_priv;
>	const char *name = NULL;
>	int type;
>
>	intel_encoder = kcalloc(sizeof(struct intel_encoder) +
>			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
>	if (!intel_encoder)
>		return;
>
>	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
>	if (!intel_connector) {
>		kfree(intel_encoder);
>		return;
>	}
>
>	dp_priv = (struct intel_dp_priv *)(intel_encoder + 1);
>
>	if (HAS_PCH_SPLIT(dev) && (output_reg == PCH_DP_D))
>		if (intel_dpd_is_edp(dev))
>			dp_priv->is_pch_edp = true;
>
>	if (output_reg == DP_A || IS_PCH_eDP(dp_priv)) {
>		type = DRM_MODE_CONNECTOR_eDP;
>		intel_encoder->type = INTEL_OUTPUT_EDP;
>	} else {
>		type = DRM_MODE_CONNECTOR_DisplayPort;
>		intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
>	}
>
>	connector = &intel_connector->base;
>	drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
>	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
>
>	connector->polled = DRM_CONNECTOR_POLL_HPD;
>
>	if (output_reg == DP_B || output_reg == PCH_DP_B)
>		intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
>	else if (output_reg == DP_C || output_reg == PCH_DP_C)
>		intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
>	else if (output_reg == DP_D || output_reg == PCH_DP_D)
>		intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
>
>	if (IS_eDP(intel_encoder))
>		intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
>
>	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
>	connector->interlace_allowed = true;
>	connector->doublescan_allowed = 0;
>
>	dp_priv->intel_encoder = intel_encoder;
>	dp_priv->output_reg = output_reg;
>	dp_priv->has_audio = false;
>	dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
>	intel_encoder->dev_priv = dp_priv;
>
>	drm_encoder_init(dev, &intel_encoder->enc, &intel_dp_enc_funcs,
>			 DRM_MODE_ENCODER_TMDS);
>	drm_encoder_helper_add(&intel_encoder->enc, &intel_dp_helper_funcs);
>
>	drm_mode_connector_attach_encoder(&intel_connector->base,
>					  &intel_encoder->enc);
>	drm_sysfs_connector_add(connector);
>
>	/* Set up the DDC bus. */
>	switch (output_reg) {
>		case DP_A:
>			name = "DPDDC-A";
>			break;
>		case DP_B:
>		case PCH_DP_B:
>			dev_priv->hotplug_supported_mask |=
>				HDMIB_HOTPLUG_INT_STATUS;
>			name = "DPDDC-B";
>			break;
>		case DP_C:
>		case PCH_DP_C:
>			dev_priv->hotplug_supported_mask |=
>				HDMIC_HOTPLUG_INT_STATUS;
>			name = "DPDDC-C";
>			break;
>		case DP_D:
>		case PCH_DP_D:
>			dev_priv->hotplug_supported_mask |=
>				HDMID_HOTPLUG_INT_STATUS;
>			name = "DPDDC-D";
>			break;
>	}
>
>	intel_dp_i2c_init(intel_encoder, intel_connector, name);
>
>	intel_encoder->ddc_bus = &dp_priv->adapter;
>	intel_encoder->hot_plug = intel_dp_hot_plug;
>
>	if (output_reg == DP_A || IS_PCH_eDP(dp_priv)) {
>		/* initialize panel mode from VBT if available for eDP */
>		if (dev_priv->lfp_lvds_vbt_mode) {
>			dev_priv->panel_fixed_mode =
>				drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
>			if (dev_priv->panel_fixed_mode) {
>				dev_priv->panel_fixed_mode->type |=
>					DRM_MODE_TYPE_PREFERRED;
>			}
>		}
>	}
>
>	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
>	 * 0xd.  Failure to do so will result in spurious interrupts being
>	 * generated on the port when a cable is not attached.
>	 */
>	if (IS_G4X(dev) && !IS_GM45(dev)) {
>		u32 temp = I915_READ(PEG_BAND_GAP_DATA);
>		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
>	}
>}

Actions: View

Attachments on bug 28911: 36758 | 36958 | 37587 | 37628 | 37658

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.